Short strings in all 14 languages; the long SD-fallback and track-stopped texts
as English placeholders until translated. v25 snapshot kept equal.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Asked for on Discord (prepper use: books and documentation offline on the card).
- The Reader opens a .txt or .md file on the card as a 16 KB window at an
offset carried in the URL (sd:/x.txt?o=49152), cut back to a line (or a whole
UTF-8 character), with Next page / Previous page / Back to the start links and
the position in percent. A book of any size pages through; Back works as usual.
- Files opens HTML on the card in the Reader (its links work there, so a folder of
pages browses offline) and text or markdown too big for the 8 KB editor; small
text files keep the editor.
- scripts/sdpack.py (standard library only): an EPUB becomes /library/<name>/ with
one page per chapter (long chapters split under 30 KB, linked in order) and a
contents page; .txt/.md are copied as they are; /home.htm lists everything, so
the Reader, which opens sd:/home.htm, starts on the library. Tested with a
generated EPUB.
ZIM (Wikipedia) files are not read on the device: their clusters are zstd/xz
blobs of 1-2 MB and the files run to tens of GB on FAT32; converting on a
computer keeps the device side small.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reported on Discord: a T-Deck that kept its data on a card that died booted
into first-time setup with a NEW private key, and the next good card was then
given the new key, so the old one was gone for good.
- DataStore keeps a copy of the main identity in NVS (namespace mc_id, 96 B):
every save writes it, a load with no identity file falls back to it and puts
it back into the active store, and a successful load seeds it when missing. A
different copy is never replaced silently; only an explicit save changes it.
Verified on a T-Deck: one boot with the card seeded mc_id.
- When the SD store was chosen but the card did not mount, the boot is flagged
(g_sd_fallback_boot) and, instead of the setup wizard (whose done-mark is on
the card too), a dialog says the card could not be read, that the key is kept
(or, on a device that never had a copy, that it started with a new one while
the card keeps the old), and offers Try the card again.
The retry ladder at lower SPI clocks already existed. Not yet done: copying the
data off a card that mounts but refuses writes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Asked for on Discord. A switch in the map options records where you go into
/meshcomod/tracks/<date-time>.gpx on the SD card, a standard GPX 1.1 track that
other mapping software opens, with elevation and time per point.
- Runs from the UI loop beside the GPS saver, so it keeps recording with the
screen off; the GPS stays awake while it records (gpsWantedLive).
- A point once we have moved 10 m (GPS jitter stays out of the distance), or
every five minutes after at least 3 m. Climb counts steps of 3 m or more.
- The file is complete after every point: the closing tags are rewritten behind
each new one (r+ and seek), so a flat battery still leaves a file that opens.
- The map draws this session's track as a red line (one lv_line, thinned to 256
points) and the status corner shows the distance and climb while recording.
- Three failed writes in a row stop it with a message; no card, no start.
Boards with an SD card and GPS (CAP_SD or the Pager). The app route was ruled out:
Lua apps stop ticking with the screen off and their files cap at 32 KB.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
beta_93 pinned the Heltec V4 to the beta_92 .lang files because the full table
no longer fit. lang_reach.py now works out which keys any source can look up:
a .lang key is kept when it equals a C string literal anywhere in the sources
(every #if branch, adjacent literals joined, LV_SYMBOL_*/UI_ICON_* and other
string macros expanded, escapes decoded as GCC does), or that literal with TR()'s
glyph prefix stripped, or a string in any Lua app. 1818 of 1925 keys survive; the
107 dropped look unused (old dropdown strings, texts the source has reworded).
The trimmed live table is 15.5 KB smaller than the pinned one (V4 4,025,365 B
used, 37.9 KB free) and carries every translation added since beta_92.
Guards: the generator refuses to trim when an input is missing (lv_symbol_def.h,
UITask.cpp, or under 80% kept) and leaves the header alone; after linking the V4,
--check-objects reads the strings the compiler emitted and fails the build if a
translated key among them was dropped (proved by dropping a live one). The
pre-build hook regenerates on source changes too, and the header is only
rewritten when its content changes. The pinned copy is gone (git history).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
"The Bluetooth chip is not responding." and "Bluetooth could not start.
Restart the device and try again." in all 14 languages, v25 snapshot kept equal.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Since beta_88 (b52c71f) the P4 stored its BLE name and PIN only when BLE was on
at boot and the C6 came up for it. A unit that booted with BLE off (or once had
it off, since that is saved) then failed every enable at once, and the UI read
every refusal as "Not enough free memory for Bluetooth", Wi-Fi off or not.
- main.cpp stores the parameters on every boot; storing them does not touch the C6.
- enableBle() brings the C6's BLE controller up on a runtime cold start
(hostedInitBLE) before NimBLE, or NimBLE would start against no controller.
- The transport records why a cold start did not happen (no parameters, the
memory guard, the radio) and the toast says so; only the guard is about memory.
Not run on a P4 yet: the P4 build has both strings in it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An app's manifest can list files beside its code as one quoted string,
"files":"beep.wav,track.mp3" (the manifest reader takes strings only). The
Store installs each into /apps/<id>.d/, the folder wada.fs and
wada.audio.play("beep.wav") already read, so an app can carry its sounds. On
the T-Display P4, whose Lua SD API is off, that was the only way to get a sound
there (#lua-app-dev). Files stream to storage through a 4 KB internal buffer
(SD writes from PSRAM come back short), the server must send a length, a
short read deletes the partial file and fails the install. Up to 8 files of
4 MB, names as wada.audio's. No app uses it yet, so existing installs are
unchanged. SDK page documents it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every Settings-group hue thresholds to white on the 1-bit panel, so an off tile
was white on white and its icon vanished, and an on tile was a bare icon. On
HAS_TDECK_PRO the tile is drawn in ink only: an outlined square with a black
icon when off, solid black with a white icon when on (the fix oumike proposed
in the issue). Not yet seen on a Pro.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Asked for on Discord. MECP (github.com/xiang-dev-1/MECP) codes an emergency
or everyday message as MECP/<severity>/<codes> [extras], so every reader with
a code table sees it in their own language. Compose: severity, codes from the
12 categories, head count and GPS position, a preview of the exact text, then
a channel post (MAYDAY asks first). Read: MECP lines heard while the app is
open are listed in words, a MAYDAY pops a toast, and Decode takes typed text.
English code table from MECP's languages/en.json (CC BY 4.0, credited); the
protocol is CC0. Needs sdk_ext; seed false, so not in the V4 image.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The solid accent button from the first fix stood out on Home. It now uses the
App shortcut tile's layout: a tinted chip in the app drawer's colour for
Advertise, the name under it in the same 12 px font and position as Apps and
Discover, and flood/nearby under that only where the tile is tall enough. The
box keeps the default widget style (glass or card), so it no longer turns into
the see-through gradient that hid its text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Notes for beta_94; the guide mentions the map's Favorites only and the
Fahrenheit option; the 14 languages move to v25 with their snapshot
(deploy/apps/lang/25/), for deploy-apps.sh at the slice.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Temperature in Fahrenheit, Up to 15 characters and Favorites only in all 14
languages; the full-Home toast as an English placeholder like the other Home
widget strings. The V4 keeps its pinned beta_92 table.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
"Temperature in Fahrenheit" next to "Distance in miles" (Settings > Display >
Status bar & units), asked for on Discord. Only what is shown converts: the
sensor text, Sensors widget and page, remote sensor widget, telemetry replies
and chart (its axis, shared with humidity, already spans -20..100). Stored
readings, logs, telemetry sent out and the Lua SDK stay in degrees C. Saved as
a one-byte blob (temp_f), so no settings-schema bump.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
MeshCore carries at most 15: the core's sendLogin() cuts there and stock
servers store 15, on the phone app too. A longer password is used as its first
15 characters, which the empty field never said (Discord).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The radar was 2x2 only, and the default Glance layout fills all twelve cells
of the T-Deck grid, so adding it (or anything) only flashed "No room for it
on Home" (Discord). The radar now also comes in the two-across size (it draws
into the shorter side), and when no cell at all is free the toast says to hold
a widget to remove one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The icon picker's last rows are text symbols (a star, a heart, a currency
sign). They were saved and announced as "Chat icon set", but the avatar only
draws colour-emoji images, so the plain avatar stayed. Now a pick with no
colour glyph is drawn as text in the colour the initials had.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
jcyrio's follow-up to #632 (ea2315e), pushed after the merge so it never
reached main. Only the .lang rows; i18n_builtin.h is generated and the V4
builds from its pinned copy.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#624's new Special keys row ended in an em dash; the other rows say Nothing.
#635 edited the generated i18n_builtin.h; regenerated from the pinned
beta_92 .lang copy the V4 builds from, so the V4 table is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
hwAdvertBuild recoloured only bg_color. On glass (the aurora default) the box
is a translucent gradient into the panel colour, and the widget's dark
ON_GLOW text vanished on it. Gradient off, opacity full.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A switch under "Direct (0-hop) only" that leaves only favourite contacts on
the map (markers and link lines), asked for on Discord. Saved as a one-byte
blob (map_fav), so no settings-schema bump. Both filters now go through one
mapHidesContact() check, and the favourites list is read once per render
instead of a blob read per contact.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
hwRadarTap called ssaverStart() directly, which never marked the screen off,
so loop() tore the saver down again on its next pass: a tap only flickered it
and dipped the backlight to 40% for a frame. It now sets the same preview
request as Settings, which starts it and marks the screen off, so it stays
until a touch ends it. ssaverStart() also refuses a second start, so the
dimmed 40% can never be saved as the user's brightness.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The GPS enable pin (GPIO11) is active-LOW on the original ThinkNode-M9 but
active-HIGH on the newer revision (keyboard controller at 0x6D, e.g. Elecrow's
Meshtastic SKU LMM15409D2). Driven LOW on those units the GPS never gets a
fix: on one unit, same spot, 0 satellites with EN active-LOW vs 15 with
active-HIGH, and 34 after 20 minutes outdoors with the GPS toggled off and on
again from the UI. Meshtastic's ELECROW-ThinkNode-M9 variant makes the same
split, keyed on the same keyboard address (m9Version > 1 ? HIGH : LOW), and
Elecrow engineers have confirmed the split.
WadaNmeaLocationProvider: keep the enable level in a member that defaults to
the compile-time GPS_EN_ACTIVE, add setEnActive() to override it at runtime
(re-driving the pin so a running GPS stays on), and an optional
setPostEnableHook() run at the end of begin(). Every other board is unaffected.
thinknode_m9: m9KeyboardAddr() and a one-shot found-callback on the keyboard
driver; target.cpp uses it, when the controller is at 0x6D, to call
gps.setEnActive(true) and to register a GPIO10 wake pulse (50 ms, HIGH 5 ms,
LOW, 50 ms) after enabling, as Elecrow engineers confirmed. Any other address
keeps the existing default (LOW, no pulse), so the 0x6C path is unchanged; it
is not tested here, no 0x6C unit was available.
Depends on the keyboard 0x6D probe change.
Signed-off-by: Pratik Patel <Pratik@MakerNova.io>
The Day glow fill thresholds to solid black on e-paper, and the 11 px
anti-aliased white figures mostly fall under the one-bit cut, so every
count badge read as a black blob. On the Pro the tab-bar/launcher pills,
the Chats badge and the Discovered-nodes badge now draw white with a 1 px
black ring and black figures, like the Pro's avatars and buttons.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
The unread and Discovered count badges hard-coded Night's dark ink
(0x00201C) on the glow fill. Day's glow is the accent darkened, so the
figures read at 1.6-2.4:1 on every preset accent. Use COLOR_ON_GLOW,
which the theme already sets per mode and look (white in Day, the
look's own ink for Neon and Pastel). Under MORE COLORS! the chat-row
pill takes the row's hue, so its figures pick their ink by that hue's
luma, as Taste the rainbow's drifting badge already does.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
The control keys (1#, ABC, backspace, enter, the arrows, the tick) are
CHECKED keys. The stock theme's CHECKED key style carries its light-mode
text colour, near black, and a CHECKED style outranks the plain key text
colour, so their labels were dark on every theme. Set the theme text
colour on our CHECKED key style as well.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Long-pressing someone else's message in a channel chat in the remote web
app now offers Reply (above Copy and Info). It prefills the composer with
the device's mention syntax '@[sender] ', keeps any draft, clamps to the
160-char limit and focuses the input. DMs and our own messages are
unchanged.
Fixes#642
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
The Contacts list now gives each contact the same icon as its chat: the
chat icon picked for it (keyed on the advertised name), else the first
emoji in its shown name, as #640 does for the chat list. Picking or
resetting a chat icon marks the Contacts list for a rebuild.
Fixes#646
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Enable CAP_UI_SIZE and the font-only text-size presets (montserrat
12/14/16, 16/18/20, 18/20/24) for HAS_TDECK_PRO boards, compile the
18/20/24 px UI fonts for them, and size the status bar to match.
Docs list the T-Deck Pro and Max under Text size.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Typing a latitude and longitude by hand is the only way to set a
position on a node without GPS, and few people know their coordinates to
six decimals. The map already knows where its centre is, so let it do
the work.
Settings > Profile gets a "Pick on the map" row under the lat/lon fields
in the Advert location card. It opens the Map tab centred on the current
position, with a crosshair pinned over the map centre and a Cancel /
Save position bar. Pan and zoom as usual, then "Save position" saves the
centre as the advert position. Leaving the tab cancels it, and so does
Back on the M9, the pager and a Bluetooth keyboard. Auto-follow pauses
while picking so it cannot pull the centre away.
With GPS on and a fix, the GPS sets the position on every loop, so a
picked one would not stay: the row is hidden then, and a fix that
arrives while picking is reported instead of saved. A centre panned past
the antimeridian is wrapped to -180..180 before it is saved.
A node without GPS usually has no map view yet either, so it starts from
the first contact that has a position; only with none at all does it ask
for a rough location first. A typed but unsaved lat/lon is saved before
the jump. The bar sits above the zoom slider, so zooming still works
while picking, and left of the right-edge map buttons, so it never
covers them on a short screen.
The four new strings are translated in every deploy/apps/lang/*.lang
file and i18n_builtin.h is regenerated, so the i18n audit stays clean
for them.
Signed-off-by: Confituurke <9595028+Confituurke@users.noreply.github.com>
Guide (wadamesh.com/docs.html): contact nicknames, the redesigned control
panel with the Battery saver tile, keyboard tooltips and the amber cursor,
automatic chat icons, the default lock wallpaper, the GPS serial speed and
battery notes, the V4 built-in apps and the Lua send budget, and a new
T-LoRa Pager section (hotkeys, navigation memory, Power off confirm, power
saving). Three new screenshots, GPS position and IP masked.
Repo docs: the Pager and M9 key guides describe tooltips, per-tab memory
and Power off, and README, TLORA_PAGER_SHORTCUTS and THINKNODE_M9_SHORTCUTS
no longer use em dashes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Review follow-up (B0N3-GD): Fn is the Pager's only symbol key, so a
held-Fn letter chord takes that letter's symbol away -- Fn+V cost the
question mark with Fn held. Fn+Enter types nothing today (Enter has no
entry in the symbol map), so the chord moves there and costs nothing.
- PagerKeyboardState: V_POS -> ENTER_POS (row 1, col 9); the chord is
still resolved by matrix position before the symbol map, only while
Fn is physically held, and cleared by discardAlt().
- PagerKeyboard.h/.cpp, UITask.cpp: renamed to *AltEnterChord*; the
paste path itself (txtPasteInto, hex-key extraction, toasts, drain
sites) is unchanged.
- test_pager_keyboard_state: chord on Enter fires once and swallows the
press; a plain Enter still returns '\r'; tap-Fn-then-Enter is not a
chord and types nothing, as before; Fn held + V types '?' again.
- TLORA_PAGER_SHORTCUTS.md: both rows now say Fn held + Enter, and the
em dash is gone from the prose.
Rebuilt and flashed on a Pager (RAM 37.8 %, Flash 90.0 %, unchanged).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VKtRiAcddFBAUDogBWmZk4
Contact nicknames: TouchPrefsStore nick blob (48 x 38 B), display-only lookups
(contactShownName, threadShownName, senderShownName), Contact options >
Nickname on the shared text prompt (an empty OK clears it).
Control panel restyled in the launcher's tile language, with a Battery saver
tile; keyboard tooltips (navSetTip), an amber cursor and touch long-press
tooltips (the T-Deck touch read hid them on every poll).
T-LoRa Pager: M/C/A/S on Home, H/S tap and hold, Backspace = Back, N = jump to
new, held Enter = long press, per-tab focus memory, Power off confirm; LVGL
-O2 and IRAM, INT-gated keyboard, idle yield, status-bar setter guards, instant
tabs; PagerGps (u-blox software standby for rests, GPS rail cut when off),
panel sleep, amp off at boot, power-off parks the radio (NSS held), GPS, panel
and keyboard light.
Fixes: the DM duplicate check keys on the attempt and a path reset clears it,
the direct timeout masks the packed path byte, web remote hops (#636);
changelog over http (#638); Lua SDK send budgets and duplicate guard (#606);
GPS speed note (#613, CAP_GPS_BAUD_AUTO); emoji chat icon (#640); default
wallpaper (#626).
Heltec V4: Tetris, 2048 and Breakout unseeded and the built-in Lua stripped of
comments (identical bytecode), 27 KB freed; the baked language table is pinned
to beta_92's files (scripts/build/lang-pin-beta92) so it still fits.
Translations: 39 new keys in 14 languages, language store v24.
Site: theme, dark mode, aurora and guide refresh, SDK send limits, nicknames.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
lib_deps takes RadioLib ^7.6.0, and a fresh fetch now brings 7.8.1. Its
LR11x0::config() wraps driveDiosInSleepMode in its own skip for LR1110
firmware below 0x0306, so the call sits one level deeper and the patch
script no longer found it. It failed closed, stopping every M9 build at
its pre-script.
The script now knows both shapes. The patch still matters on 7.8.1:
firmware 0x0306 and 0x0307 get past RadioLib's own skip, send the
command, answer CMD_PERR and would abort radio init with -706.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016yt7fNCKmafm9LtRjyuUmS
scripts/build/i18n-audit.py reported the same 18 keys missing in all
14 language files -- the background picker (Background, Background
colour, Still/Moving aurora, Image, None, Choose an image, Choose the
colour, Set as background, the JPEG hints and the restart notice), the
GPS battery saver (Save battery, Check position every, the two
descriptions, "GPS: resting, next check in %lum%02lus") and the
"remote view open" touch-sleep block reason.
Each file gets the 18 rows in its alphabetical slot, translated rather
than left as English placeholders, reusing the terms the files already
use for the older wallpaper strings (Hintergrund, fond d'écran, sfondo,
achtergrond, háttérkép, pozadí, papel de parede/fundo, fundal, фон,
позадина, φόντο ...) and for the battery saver. "%lum%02lus" is kept
verbatim in every language. src/ui-touch/i18n_builtin.h regenerated
with scripts/build/gen-lang-builtin.py; the audit now passes for all
14 languages. "# ver: 23" left alone, since that is bumped at release.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VKtRiAcddFBAUDogBWmZk4
