docs.html follows: the group's name, Theme under it, and Run setup again
and Reboot on the Device page rather than General.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Hardware, the setup wizard Bluetooth hint, Radio:/Keyboard: and the four
keyboard protocol states in all 14 languages, taken from #631 so they
ship with the code that uses them.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
About (Build) and the boot log name the meshcomod release the core is:
"on meshcomod v1.18.0.1". release.sh reads it from the pinned core's own
examples/companion_radio/MyMesh.h, keeps the in-tree defaults in step and checks
every staged image carries it. Language store v26 (this build's new texts),
release notes for beta_95.
Bench (T-Deck, 1.18): device and self info, 404-contact sync, the companion CLI
(ver, board, get name/radio/tx/freq, unknown command), 4 packets received and a
zero-hop advert sent in 90 s, correct device time.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Spectrum: stat tiles (peak, floor, our channel, busy), plot and waterfall drawn
at screen size (the lv_chart and zoomed waterfall were the page's render cost),
dark-to-yellow waterfall, peak hold, our-channel marker, Band/Channel and
Live/1 min/10 min chips. RF Monitor 1.4 (tiles, filled chart, typed feed, packet
detail card; the old type table did not match MeshCore payload types) and
Airtime 1.6 (big figure, tiles, duty line, rx/tx split).
Lua SDK: ui.panel, bold labels and a size-24 figure font, colors.warn/border,
app.on_audio (fires with the screen off), read-only wada.sd.list and sd: audio on
the SD_MMC boards (P4, Tanmatsu, Wio L2), caps panel/audio_events/epaper, a
"music" icon and an "audio" Store requirement. button:set() no longer writes
label fields into the button object (heap corruption, every earlier firmware).
The SDK page's input table described events the firmware never sent.
Music 1.0 (Store app): plays MP3/WAV from the card's Music folder, shuffle,
repeat, keeps going through the list with the screen off. Verified on the
T-Display P4 end to end.
Store: the update check also fetches the app catalog and badges the Store tile
with the number of installed apps that have a newer version. Baked Lua apps are
raw-deflated and inflated by the S3 ROM (14.6 KB back on the V4); the V4 language
table keeps only texts of apps it can run.
Fixes: the SD-card notice no longer fires when the card mounts fine (#667); the
Control Center clock keeps time while open (#666); M9 keyboard brightness (#664);
the battery widget's number no longer sits on a ring too small for it (Discord);
M9 shortcuts doc follows #669's composer order. New texts in all 14 languages.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Short strings in all 14 languages; the long SD-fallback and track-stopped texts
as English placeholders until translated. v25 snapshot kept equal.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
"The Bluetooth chip is not responding." and "Bluetooth could not start.
Restart the device and try again." in all 14 languages, v25 snapshot kept equal.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Asked for on Discord. MECP (github.com/xiang-dev-1/MECP) codes an emergency
or everyday message as MECP/<severity>/<codes> [extras], so every reader with
a code table sees it in their own language. Compose: severity, codes from the
12 categories, head count and GPS position, a preview of the exact text, then
a channel post (MAYDAY asks first). Read: MECP lines heard while the app is
open are listed in words, a MAYDAY pops a toast, and Decode takes typed text.
English code table from MECP's languages/en.json (CC BY 4.0, credited); the
protocol is CC0. Needs sdk_ext; seed false, so not in the V4 image.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Notes for beta_94; the guide mentions the map's Favorites only and the
Fahrenheit option; the 14 languages move to v25 with their snapshot
(deploy/apps/lang/25/), for deploy-apps.sh at the slice.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Temperature in Fahrenheit, Up to 15 characters and Favorites only in all 14
languages; the full-Home toast as an English placeholder like the other Home
widget strings. The V4 keeps its pinned beta_92 table.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
jcyrio's follow-up to #632 (ea2315e), pushed after the merge so it never
reached main. Only the .lang rows; i18n_builtin.h is generated and the V4
builds from its pinned copy.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Typing a latitude and longitude by hand is the only way to set a
position on a node without GPS, and few people know their coordinates to
six decimals. The map already knows where its centre is, so let it do
the work.
Settings > Profile gets a "Pick on the map" row under the lat/lon fields
in the Advert location card. It opens the Map tab centred on the current
position, with a crosshair pinned over the map centre and a Cancel /
Save position bar. Pan and zoom as usual, then "Save position" saves the
centre as the advert position. Leaving the tab cancels it, and so does
Back on the M9, the pager and a Bluetooth keyboard. Auto-follow pauses
while picking so it cannot pull the centre away.
With GPS on and a fix, the GPS sets the position on every loop, so a
picked one would not stay: the row is hidden then, and a fix that
arrives while picking is reported instead of saved. A centre panned past
the antimeridian is wrapped to -180..180 before it is saved.
A node without GPS usually has no map view yet either, so it starts from
the first contact that has a position; only with none at all does it ask
for a rough location first. A typed but unsaved lat/lon is saved before
the jump. The bar sits above the zoom slider, so zooming still works
while picking, and left of the right-edge map buttons, so it never
covers them on a short screen.
The four new strings are translated in every deploy/apps/lang/*.lang
file and i18n_builtin.h is regenerated, so the i18n audit stays clean
for them.
Signed-off-by: Confituurke <9595028+Confituurke@users.noreply.github.com>
Contact nicknames: TouchPrefsStore nick blob (48 x 38 B), display-only lookups
(contactShownName, threadShownName, senderShownName), Contact options >
Nickname on the shared text prompt (an empty OK clears it).
Control panel restyled in the launcher's tile language, with a Battery saver
tile; keyboard tooltips (navSetTip), an amber cursor and touch long-press
tooltips (the T-Deck touch read hid them on every poll).
T-LoRa Pager: M/C/A/S on Home, H/S tap and hold, Backspace = Back, N = jump to
new, held Enter = long press, per-tab focus memory, Power off confirm; LVGL
-O2 and IRAM, INT-gated keyboard, idle yield, status-bar setter guards, instant
tabs; PagerGps (u-blox software standby for rests, GPS rail cut when off),
panel sleep, amp off at boot, power-off parks the radio (NSS held), GPS, panel
and keyboard light.
Fixes: the DM duplicate check keys on the attempt and a path reset clears it,
the direct timeout masks the packed path byte, web remote hops (#636);
changelog over http (#638); Lua SDK send budgets and duplicate guard (#606);
GPS speed note (#613, CAP_GPS_BAUD_AUTO); emoji chat icon (#640); default
wallpaper (#626).
Heltec V4: Tetris, 2048 and Breakout unseeded and the built-in Lua stripped of
comments (identical bytecode), 27 KB freed; the baked language table is pinned
to beta_92's files (scripts/build/lang-pin-beta92) so it still fits.
Translations: 39 new keys in 14 languages, language store v24.
Site: theme, dark mode, aurora and guide refresh, SDK send limits, nicknames.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Updated the UI to include functionality for selecting links or locations in chat messages.
- Refactored chat link handling to improve user experience when interacting with links in chat bubbles.
scripts/build/i18n-audit.py reported the same 18 keys missing in all
14 language files -- the background picker (Background, Background
colour, Still/Moving aurora, Image, None, Choose an image, Choose the
colour, Set as background, the JPEG hints and the restart notice), the
GPS battery saver (Save battery, Check position every, the two
descriptions, "GPS: resting, next check in %lum%02lus") and the
"remote view open" touch-sleep block reason.
Each file gets the 18 rows in its alphabetical slot, translated rather
than left as English placeholders, reusing the terms the files already
use for the older wallpaper strings (Hintergrund, fond d'écran, sfondo,
achtergrond, háttérkép, pozadí, papel de parede/fundo, fundal, фон,
позадина, φόντο ...) and for the battery saver. "%lum%02lus" is kept
verbatim in every language. src/ui-touch/i18n_builtin.h regenerated
with scripts/build/gen-lang-builtin.py; the audit now passes for all
14 languages. "# ver: 23" left alone, since that is bumped at release.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VKtRiAcddFBAUDogBWmZk4
Review follow-up: the new TR("Clipboard empty") toast had no row in
deploy/apps/lang/*.lang, so i18n-audit.py flagged it in all 14
languages. Added in each file's alphabetical slot (after "Client
repeat") and regenerated src/ui-touch/i18n_builtin.h with
scripts/build/gen-lang-builtin.py. The audit no longer lists the key.
"# ver: 23" is left alone, since that is bumped at release.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VKtRiAcddFBAUDogBWmZk4
Home is a grid of arrangeable widgets (24 kinds, presets, a layout per
orientation, Lua app widgets via wada.widget); Unread, Chat and Mentions
get a large size. Theme > Background puts an aurora (still by default, or
moving), a colour, a picture or nothing behind every screen, with glass
cards and a smoked-glass top bar. A GPS icon in the bar, a GPS battery
saver (u-blox GNSS stop/start where there is no power switch), and a
battery saver that no longer waits for Bluetooth and Wi-Fi to be off.
Also: navigation bar position, every settings page on the redesign's
cards, a faster app drawer, slower screensaver drift for burn-in, text
wrapping at spaces only, the V4-R8 Store Apps tab, and SDK Test marked
extended-SDK only (keeps the 2 MB V4 at 99.8%).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Testers said the colour was what set wadamesh apart, and the beta_89 redesign
took most of it out. This puts it back as choices on one new page.
Settings > Theme (CAT_THEME, Device group): a live preview drawn from a copy of
the palette (themeTokensFor), Night/Day cards, High contrast, the accent swatches
inline with Custom, MORE COLORS! with Regular/Neon/Pastel, Taste the rainbow, and
the chat looks. Mode, accent and look are pending until one Apply and restart on
the preview box; scrolled past it, a slim bar under the title carries the button
with six dots in the picked look. Chat icons, bubbles and compact apply live. The
look rows left Display; the control panel's theme chip long-press opens Theme.
The colour engine: ThemeTokens + lookAdjust over the mode and accent at boot
(applyBootTheme), section hues for the launcher, Settings, tab bar and status
icons, per-name colours (FNV hue) for names, glyphs, initials balls and bubble
tints, Neon lit edges and gradient primaries, Pastel tints, and a deeper Day ink
for names and glyphs on light lists. MORE COLORS! defaults on (Regular); HC and
e-paper keep their own colours. New prefs are standalone u8 keys (chat_icons,
col_more, col_style, col_rb), no schema bump.
Taste the rainbow: per-item hues round the wheel, a 10 Hz hue drift on the tab
marker, chats count and focus ring (rests when off, locked or screensaver), press
dip, an arrival flash on new bubbles (draw-only props, the virtual list never
sees it), rainbow lock mark, boot mark and Constellation nodes (CstTheme
node_sat/node_val), and a dot burst on enabling it.
Chat icons: Glyphs or Initials through one avatarApplyLook; AVATAR_SQUARE_FLAG
moved off LV_OBJ_FLAG_USER_1, which is the nav's NAV_SKIP_FLAG.
Size: wadamesh_mark_rgb.h was a static array included by main.cpp and
UITask.cpp, so every S3 image carried the 30 KB boot mark twice. One definition
now (UITask.cpp; the P4 never compiles main.cpp). The V4 goes from overflowing to
~30 KB free with all of the above.
Capture tour: wakes and ends the screensaver before shooting, DOC_LOOK forces a
look, DOC_LOOK_AUDIT walks the looks and the Theme page, DOC_MAP_SHOT waits for
Wi-Fi and for every tile before shooting the map.
25 new strings as English placeholders in every .lang file.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every screen redesigned to the Oct 2026 mockups, on one design system:
palette, type roles (generated Montserrat faces with Lucide line icons on the
LV_SYMBOL codepoints), a theme apply-cb that styles every LVGL widget, button
kinds, list rows, sheets as action lists, toasts and key-glyph avatars.
Rebuilt: status bar, Chats (filters, + and menu), conversation (route header,
hop meta, "Heard by N repeaters", delivery states, pill composer), lock screen
(mark, clock, 24 h activity, unread cards), Constellation screensaver, Home
launcher and launcher sheet, Status page, grouped Settings home, animated boot
splash, and the message glance as a notification card.
New: optional PIN lock (salted SHA-256, keyboard / touch pad / number pad per
board, backoff that survives reboot), screensaver on battery with its own
duration, T-Deck text sizes, trackball hold to switch Scroll and Cursor (Scroll
default, prefs v69/v70), hold Settings tab for the control panel. M9 bottom
notices removed. Every screen measured for the Large and Huge text sizes.
Fix: adverts over 2/3-byte path hashes never reached the recently heard table
(packed path_len compared as a byte count); ADVERT_PATH replies now carry the
whole multi-byte path.
English placeholders for the 204 untranslated keys in every .lang file.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Closes#591, #592, #593 and the M9 Bluetooth status-bar overlap museifu696
reported. Also the T-Pager battery saver zomgugoff asked for and the status-bar
clock fix.
Review notes, since this landed on top of a day of P4 and M9 work:
* The prefs change is done the right way. condense_nav is appended at the TAIL,
CURRENT_VERSION goes 65 -> 68 with v66/v67/v68 each described, and the
trailing static_assert moves to the new last field. v67 and v68 are one-time
per-board resets with no new field, which is the pattern v63 and v65 used.
* Six conflicts, all in test_touch_prefs_schema.cpp, all the same shape: we had
both repaired the same broken sums. His version is a superset (it adds
condense_nav on top of the report_ping/report_done_n I added), so his wins.
Verified afterwards that both sides survived rather than trusting the merge:
the channel-send guard, the P4 tile-FS fix, statusPctOverflow, m9NoticeSet,
m9DiscoveredUnseen and TDP4_C6_ID are all still present, as are his kbd_nav
and Condense Nav work. Host suite 17 pass / 0 fail at v68.
Also here: PUBLISH the translations the PR added.
It added five strings to all fourteen language files with real translations, but
left "# ver: 22" alone and did not touch langs.json. Devices fetch lang/<ver>/,
so the version is the only thing that makes one re-download: without a bump the
work sits in the repo and reaches nobody, and every non-English device shows
those strings in English. The baked-in table was regenerated, so compiled-in
languages were fine -- it is the downloaded ones that would have silently
stayed behind. Bumped to 23, snapshotted into lang/23/, and langs.json points
at it. deploy-apps.sh validates: 14 languages and 14 apps, every referenced
file present.
That store still has to be pushed with the release; editing deploy/apps/ is not
publishing it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The wheel is the Pager's only way to move the highlight, which is slow
and imprecise. Bring the T-Deck's keyboard navigation to it:
- With no text field focused, programmable letters move the highlight
(default I up, K down, J left, L right) and scroll (U / O). Select
and Back default to no letter, since Enter and Backspace-hold (the
wheel's click / long-press) already do them. On the Map the letters
move the highlight; W/A/X/D stay the map pan.
- The tab keys are programmable like the T-Deck's, defaulting to the
Pager's M/C/H/A/S, and the bar's labels show whatever is bound.
- Settings > Keyboard gets the same "Keyboard navigation" switch (on by
default here) and the same tap-a-row-then-press-a-key remap rows; the
T-Deck's rows move into settingsNavKeyRows() so both boards share them.
The Pager's switch only turns the letters on or off; it never empties
the focus group, which the wheel always needs.
- A remap refuses letters the Pager uses for fixed actions (Q/E slider
nudge, W/A/X/D map pan; A stays allowed as a tab key).
- In wheel edit mode on a slider, J/L preview like a turn and the
select key closes the edit, matching the wheel.
Settings: the Pager's kbd_nav and key bindings were never shown on that
board, so they held the T-Deck defaults. Schema v67 (no new field) puts
the Pager defaults in once on that board only. Two new strings,
translated in every deploy/apps/lang file; i18n_builtin.h regenerated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019M5VJ43X3nUULPqVcgrAH2
On short landscape panels (the T-Pager is 480x222) the bottom nav bar
spends a full-width strip on five icons. New Settings > Display switch
"Condense Nav", off by default, applies after a restart:
- The nav bar becomes a rail on the right edge (LV_DIR_RIGHT tabview).
Pager cells show the key letter under the icon; the Tanmatsu keeps its
coloured F-key shapes; the T-Deck / P4 key hints sit under the icons.
- Home's launcher column (Advert, Terminal, Files, Apps, Control) shows
icons only; the buttons keep their height and spacing, and the status
text, chart and info card widen into the freed space.
- The active-tab marker turns vertical beside the active cell, the
unread and update badges move to the top-right of their cells, and the
rail stays solid (and the marker visible) on the Map.
- Content that kept the bottom bar visible now stops at the rail
instead: tabContentW() subtracts the rail, and the map canvas, Settings
landing grid, chat-list rows, Mentions and the app drawer use it.
Swipe-left on the rail opens the drawer (swipe-up on the bottom bar).
Portrait layouts and the M9 are unchanged: the mode is decided once in
buildUiTree from the pref and the orientation at boot, the switch is
greyed out in portrait and absent on the M9.
TABBAR_H becomes a runtime value (0 with the rail) next to a new
TABBAR_W. The pref is a new trailing field, condense_nav (schema v66);
the schema test's layout asserts now count the v64 fields they missed.
Strings added to every deploy/apps/lang file and i18n_builtin.h
regenerated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019M5VJ43X3nUULPqVcgrAH2
The five apps from #585 and #586 all defaulted to being seeded, which bakes
their source into the boards that cannot reach the Store. That is 40 KB of Lua,
and it took the Heltec V4 from 95.4% of flash to 96.7%: the tightest board in
the matrix paying for apps two of which it cannot use.
gen-lua-builtin.py states the rule: an app that is large, or that needs hardware
those boards do not have, earns its place rather than getting it by being in the
catalog. ProTreck (17 KB, altimeter/chrono/sensors) and Trip Odometer (GPS-only)
are both that, so they are seed:false, exactly like gpscompass and sdscan. They
remain in the Store for every board that can download.
Tetris, Breakout and Ping stay baked: no hardware needs, small, and the boards
that get seeded apps are precisely the ones that cannot fetch them otherwise.
V4 lands at 96.2%.
lua_builtin.h is regenerated here because it is tracked and the build rewrites
it. Leaving it out is how Wardrive and Nearby ended up missing from the seeded
boards after beta_68.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Stacked on #585 and merged after it, as the PR asks. Two conflicts, both from
the stack base moving:
apps.json: unioned by id, so all fourteen apps survive.
harness.lua: the additive blocks came from #586. Where both sides edited the
same code, #585's is newer and wins: its ping scenarios pass cfg.gps as a
FUNCTION, which is what the harness calls (cfg.gps()); #586 still passed the
table and would have failed. Taking #586 there would have broken ping.
Then restored the two dispatch branches my first resolution dropped. The
breakout and tripodometer scenarios existed but nothing ran them, so both
apps silently fell through to the gpscompass scenarios and "failed".
All five new apps pass their own scenarios, and so do gpscompass and sdscan.
Sun/Moon rise+set from GPS lat/lon + date (Spencer 1971), moon phase 0-29.
Chronometer with lap times, countdown timer with alarm beep and preset
cycling, altimeter with GPS alt_m, min/max persistence and trend graph.
Swipe left/right to switch tabs. 4 tabs fit any screen size.
test(harness): add 7 ProTreck scenarios (tdeck, v4, no_gps, chrono,
timer, alti, cost). ALL OK 7/7.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Send a DM to any contact, measure round-trip time. Both devices
exchange their GPS coordinates; the result shows RTT, distance and
cardinal bearing when both have a fix. The app also auto-replies to
incoming pings so two devices running Ping can time each other.
Harness additions: send_dm mock, wada.geo (haversine), deliver_dm
helper, and 6 scenarios (tdeck, v4, no_contacts, round_trip,
auto_reply, cost) — all pass.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Tracks total distance (Haversine accumulation), elapsed time, current
speed, max speed, and altitude from live GPS fixes. Start/Stop button
pauses accumulation; Reset clears the trip. The current trip persists
across app restarts via wada.store.
Also adds 6 harness scenarios (no-fix, T-Deck, moving, persist, reset,
cost) and registers the app in apps.json.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Ball + paddle + 8×5 brick grid. Swipe left/right (or arrow keys) to
move the paddle; swipe up / Enter / Space to launch. Angle on bounce
varies by paddle-hit position. Speed increases each level; high score
persists via wada.store.
Adds 6 harness scenarios (tdeck, v4, keyboard, logic, hiscore, cost).
Worst tick ~8k instructions, 8% of the 100k budget.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds Tetris to the app catalog. Full 7-tetromino implementation with:
- Correct piece rotations for all 7 tetrominos (I, O, T, S, Z, J, L)
- Wall kick on rotation (tries +/-1 col when center position collides)
- Hard-drop on swipe-down or Enter/Space
- Soft-drop on keyboard arrow-down
- Score scaling by level (100/300/500/800 x level per 1/2/3/4 lines)
- Speed increase every 10 lines cleared (700ms to 80ms floor)
- Next-piece preview and high score persistence via wada.store
- Game-over overlay with tap-to-restart
- Centered layout adapts to any screen width/height
Tested against the wada.* API contract (integer coords, canvas bounds,
store string/number restriction, instruction budget per tick).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Four things the merges needed.
The POI menu from #549 was not in the popup registry. Every modal in this file
registers its closer there, and one that does not cannot be dismissed by Back or
by the screen-lock teardown: it stays on screen while the page behind it
changes. That is the same failure #553 describes for Known Regions, which #550
fixes in the same slice.
Czech had no POI string. It was added after #549 was opened, so thirteen
language files got the row and the fourteenth did not.
Auto keyboard backlight never switched off when the screen timeout is Never.
#550 changed Auto to follow the screen timeout instead of a fixed three-second
window, which is right, except that Never then means lit forever. Auto is the
default mode, so a device left on a desk would burn its keyboard backlight until
the battery gave out, where the old window at least ended. The Never case is
bounded to a minute; mode On is still there for a permanently lit keyboard.
Compact chat rows have vertical padding on the T-Deck Pro and Max (#563).
Compact mode leans on the alternating row tint to show where a message ends and
e-paper has no tint, so messages ran together, worst when one wrapped.
Not fixed here: #562, the Pro terminal drawing black on black. The console
already special-cases e-ink, the Pro's palette is white paper and black ink,
LovyanGFX treats equal fore and back as transparent rather than a filled block,
and consoleBegin gets the display before anything renders. The remaining suspect
is the pre-LVGL boot screen, which fills black on purpose because "our pre-LVGL
screens are always dark" and inks the whole panel on e-paper. That needs the
device to confirm, and guessing at an e-paper fix is how a regression ships.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
M9 Back and Bluetooth-keyboard Esc stop at the locked app-drawer root, M9
focus fixes, optional M5Stack CardKB on the V4 and V4-R8, V4-R8 touch and
text-size accessibility, Wio L2 SD retry, high-contrast day and night themes
(#544), channel region discovery (#541) and the Czech translation
contributed in #540 by brebtatv.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
An infected M9 card turned up with 373 findings. Every list row is a focus
stop on a keyboard board, and the firmware's key navigation collects at most
160 of them per screen, so in 1.0 the Remove all and Scan again buttons below
the list could not be reached on an M9 at all.
1.1 puts the buttons above the list, first in focus order, on the results
and failed-removal screens, and shows at most 60 rows plus an "and N more"
row (the title carries the full count). App-only: no firmware change.
Harness: a 373-finding scenario, and a check on every list screen that the
buttons come first and the focus stops stay under 160. It fails on 1.0.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Some ThinkNode M9 cards shipped with a dormant Windows worm (Elecrow
security advisory, September 2026). An infected card seen since carries
autorun.inf in the root, launching xlfqf.pif on open, explore and autoplay
with random-junk comment lines in between: the Sality autorun pattern.
- SD Scan store app (deploy/apps/sdscan/1.0, requires "sd", not seeded):
walks the card a small page per tick, lists what it finds and why, and
removes it after a confirmation screen with Cancel first. It says on
every screen that it only removes files it recognises and that
formatting the card is the safe fix. On older firmware it still finds
threats by name but cannot remove them.
- Firmware: wada.sd.check(path) and wada.sd.remove(path), plus paging for
wada.sd.list(path, start, max) and caps().sd_clean. What counts as a
threat lives in SdThreat.h: autorun.inf, Windows program, script and
shortcut extensions, or a real MZ+PE header under any name. remove()
classifies again in firmware and refuses anything else, so no app can
use it to delete tiles, backups or chat history. It clears read-only,
hidden and system first, because FAT refuses to delete a read-only file.
- A warning when a card with Windows malware in its top folder is mounted,
at boot or on insert, offering SD Scan (or the Store).
- Tests: test/test_sd_threat.cpp, and SD Scan harness scenarios including
the real infected card's root. Removal checked on a T-Deck.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- Web interface: unlock a manually locked screen (#506). The device publishes
its lock state over the mirror socket and the page shows an Unlock button
while it is set. The lock screen absorbs taps by design and only a held
trackball or BOOT press unlocks on the device, so a browser had no way back
from a screen it had locked itself.
- Console mode: hold the panel for three seconds to leave it (#507). The
banner and `help` both say so. Console mode also applies the "Older keyboard
protocol" setting now: that is applied in the graphical startup path, which
console mode returns before, so the console ran on protocol detection alone.
On a T-Deck that needs the older protocol every keystroke there is garbage,
which is why `ui` could not be typed and the reporter had to side-load a
second firmware to get the device back.
- Console mode: a touch wakes a dark panel again on the touch-only boards,
where the keyboard and button wake paths sit below the console branch's
return. The waking press is swallowed so it cannot also type.
- Paste into a key field lifts the key out of the surrounding text (#526): a
32 hex digit channel secret or a 64 hex digit public key, spaced keys
included. Before, the field filled with prose and the length cap cut the key
off.
- ThinkNode M9: a waiting firmware update is visible (#443). The red "!" over
the bottom-bar gear is built in the #else of that board's block, so the M9
had no update signal at all; it gets a third slot in its own notice row,
steady amber rather than blinking. The Settings tile in the app drawer
carries an "!" on every board.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Bluetooth serves either the phone app or a keyboard (Settings > Bluetooth).
Pairing lists keyboards in pairing mode and pairs with or without a code;
the paired keyboard reconnects by itself.
Keys are read the way phones and computers read them: the keyboard's Report
Map says which report carries the keys and how, so media keys and touchpads
are left alone, and the boot protocol is only the fallback. Key positions are
translated with the chosen layout (US, UK, German, French, Belgian), with
AltGr and dead keys.
While a keyboard is connected:
- text goes into the focused field, and touchscreen-only boards keep the
on-screen keyboard down (a second tap on a field brings it up anyway)
- the arrows, Tab, Enter and Page Up/Down drive the focus highlight
- Esc is the back button; a "Back key" setting picks another key for
keyboards whose Esc key types a character
- tab hotkeys and their hints over the tab bar are switched on
- Command tapped alone opens the emoji picker in a chat
- the status bar shows a keyboard instead of the Bluetooth glyph
The Bluetooth page is now a flex column with the choice on top, and the
settings page refit keeps it scrollable when its content grows.
Settings: prefs v61 (mode, layout, paired keyboard) and v62 (Back key).
Tests: test/test_hid_report_map.cpp, test_touch_prefs_schema.cpp.
Not on the P4 boards (Tanmatsu, T-Display P4).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The "System Information" key fix (6bb98a1) changed the flat packs in
deploy/apps/lang/, but devices never download those: they fetch the immutable
copy at apps/lang/<ver>/<code>.lang, keyed on the version in langs.json. With
everything still at v21, the store kept serving the old key from lang/21/ and
no device re-downloaded anything, so the fix reached only the Heltec V4, which
bakes the table into its firmware.
Bumped "# ver:" and the catalog to 22 in all 13 languages and snapshotted the
packs into lang/22/, the documented three-step publish. The generator ignores
the version line, so the baked table and the published beta_80 firmware are
unaffected.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
