- p4-release.sh builds and verifies the three revisions (V1.2, V1.1, V1.0)
from crowpanel_p4_101/ in the same loop as the T-Display P4 images, with
the same OTA-name and tag checks.
- Self-update is on (CAP_OTA 1): each revision updates from its own
wadamesh-crowpanel-p4-101-v1x.bin, so a V1.0 never takes a V1.2 image.
- gen-flasher-meta writes a manifest per revision; wadamesh.com gets a
CrowPanel Advanced 10.1 card with a V1.2 / V1.1 / V1.0 picker, and the
standalone flasher one card per revision. Both point at the beta feed,
so nothing shows until the next beta publishes the images.
- README, DEVICES.md and the site's board count (15).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Wio Tracker L2 has no battery-backed clock, so it gets the same
opt-in saved-Wi-Fi time sync at power-on as the T-Deck
(CAP_BOOT_TIME_SYNC / BootTimeSync).
Split out of 4844a9b (Touch UI follow-ups 4).
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
chatHeaderApply now resets chat_back's translate_y, which updateGlobalStatusBar
skips in a chat, so a chat opened from a settings or app page no longer keeps
the half-bar upward shift. DEVICES.md and the site describe the hardware
testing, and the site counts 14 boards.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Tested on hardware: while sending messages, the sideways jump during flash
writes is now a brief freeze or flicker, with no crash and no panel self-test.
The crowpanel_50 env now sets CROWPANEL50_FLASH_PAUSE and wraps
esp_flash_write and esp_flash_erase_region. DEVICES.md notes the behaviour.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
New env crowpanel_50_companion_radio_touch for the 800x480 ST7262 RGB panel,
GT911 touch and an SX1262 in the wireless slot. Board quirks follow Camillia-MT:
14 MHz pixel clock, internal-RAM draw band, PCA9557 (V1.0) / MCU (V1.1+)
backlight controller detection with GT911 reset at 0x5D or 0x14, NSS on GPIO8
(V1.2+), no SD/GPS/battery. Large-screen layouts and UI-size fonts; browser
file transfer to the internal tiles partition. Added to the upload helper,
release script, flasher manifests, site, DEVICES.md, README and NOTICE.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
- New crowpanel_35 variant: display, SD, board and target files, plus board JSON
- Portrait mode is drawn rotated 180°; landscape stays at rotation 3
- Share the GT911 touch driver between Wio Tracker L2 and CrowPanel
(WioTrackerL2Touch.cpp -> src/helpers/input/LgfxGt911Touch.cpp)
- platformio envs, flasher/site entries, release and merge-bin support
- Tests for the CrowPanel SD codec and merge-bin
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0132MkJ7RUV32mV9F7o4PJMm
Lock screen (all boards, #579): the default view is now drawn from parts
instead of the old 320x240 bitmap with the padlock and wordmark baked in,
which cover-scaled into a jumble on any other panel shape. WADAMESH sits at
the top, the clock below it (clear of the status bar), a smaller padlock in
the centre with the unread count to its left and a new battery readout to its
right, each centred between the padlock and the screen edge. Short panels get
a smaller wordmark and padlock. The clock's burn-in drift now moves around its
new place instead of snapping it back to y=30 every minute. T-Deck Pro keeps
its black-on-white e-paper colours; custom wallpapers are unchanged.
T-Display P4: the BOOT button (GPIO35) now works like the Wio Tracker L2's
wake button -- a press wakes or lights the lock screen, a 2 s hold locks or
unlocks -- so the P4 gets the lock screen and the "Lock when screen off"
setting. It gets no Power-off row: GPIO35 cannot wake the P4 from deep sleep.
Also: the chat list's per-row gear clears the list scrollbar on large panels.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The T-Display P4 keyboard expansion (TCA8418 + its own XL9555, ported from
camillia-mt) now works. It is looked for every 1.5 s, so it can be clipped on
or off while running, and is routed like the CardKB and Bluetooth keyboards:
it types into the focused field and keeps the on-screen keyboard down. The
external-keyboard routing was gated on Bluetooth, which the P4 lacks, so it
now follows a new CAP_EXT_KEYBOARD; the Bluetooth-only parts stay on
CAP_BLE_KEYBOARD.
- Keys: Shift/Sym/Alt one-shot, Caps Lock lights the expansion LEDs, arrows
and Backspace repeat, Alt+Backspace backs out, F1-F5 open the tabs left to
right, and F11 steps the keyboard light through off/low/medium/high (saved
across reboots).
- Wire1 is shared with the ES8311 codec on other pins; P4I2c1 switches it
under a lock, and the codec's lazy bring-up now goes through it.
- With the keyboard attached the tab bar labels F1-F5 beside each icon, and
Enter on a chat bubble opens its action menu.
Also, on any keyboard build, Enter runs the command in the terminal and the
repeater admin console (the admin console's Enter hook sat on its Send button,
where nothing raised it). And on the P4: the status-bar name shrinks to fit the
bar, the Discover buttons are spaced out, contact names clear their icon in
landscape, and leaving an app returns the focus to its tile in the app drawer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Review of #531 turned up four things that had to be fixed before release:
- An unusable region name no longer discards the radio settings. The save
returned early, so frequency, bandwidth, SF, CR and TX power were thrown
away, and the rule rejects names with capitals or a "$private" scope, so
anyone carrying an older region could not change their radio at all. On the
pager that path is the silent blur save, so it failed with nothing on screen.
Now only the region is skipped, and it says so.
- Restored useChainedFont() on the telemetry Show button: without the fallback
chain that label is boxes in Russian, Ukrainian, Bulgarian, Serbian, Greek.
- Region scanning installs unknown repeaters as transient contacts so their
encrypted replies can be matched. They were never removed, so each scan left
up to 16 nameless entries in the contact table (and in Contacts). They are
dropped when the scan ends or the page closes.
- One radio request per scan tick. The loop ran through all 16 repeaters in a
single 200 ms tick, which is that many key derivations back to back.
The V4-R8 also did not build (its src/ files see a vendored lv_conf.h, so the
new text-size fonts were missing) and then did not fit at 101.3%. It builds at
85.6% now: the board no longer carries the compiled-in translations it
inherited from the V4, which it never needed, since with 8 MB of PSRAM its
store works like any other 8 MB board.
T-Deck Max (#545) joins the release matrix: build list, flasher manifest,
DEVICES.md and the site's board list. Board names in the flasher lost their
em dashes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
oumike. ESP32-S3, 16 MB flash, 8 MB octal PSRAM, quad-SPI 320x240 panel via
LovyanGFX, GT911 touch, SX1262 at 22 dBm, GPS, microSD on SD_MMC. New board
file, new variant, one new env. Seeed start selling it next week and the
maintainers have the hardware; we do not.
Merged on their hardware bring-up rather than ours: display, touch, GPS,
microSD, battery and buttons are confirmed on-device by the author. What this
side can prove is that it does not cost anyone else anything, so the whole
matrix was built: all nine S3 envs including the new one, plus both ESP32-P4
targets.
The PR also carries accumulated touch-UI work from the author's development
line, which he flagged himself and offered to split out. Merged as-is because
the three-way merge came through with zero conflicts and nothing from today was
reverted: the prefs schema is still v54, and kb_force_legacy, boot_wifi_open,
the P4 gpsEnsureBigRxRing fallback and the chat-store migration logging are all
still present. Verified explicitly rather than assumed, since the diff against
main showed 1706 deletions purely because the branch predates today's merges.
Two bring-up findings worth keeping: Arduino's Serial1.setPins() takes (rx, tx),
so PIN_GPS_TX is the pin we receive on -- the same naming trap the V4-R8 and
Pager envs already carry, and it left this board's GPS listening on a silent
pin. And the panel is fixed landscape (CAP_ROTATABLE 0), so the keyboard's
rotate arrows are not built there.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
e2d07d8 added the four missing boards to the support matrix, which was the right
call -- the docs were listing five of ten. Three details in it do not match what
we actually publish.
The T-Lora Pager's display is listed as AMOLED. It is a 2.33" IPS ST7796U LCD at
480x222 (TLORA_PAGER_PORT.md's hardware table, and the ST7796LCDDisplay driver
it boots). The AMOLED is the T-Display P4, one row down.
The Pager, the Heltec V4-R8 and the T-Display P4 are all marked Stable. All
three install from latest-beta on the site and all three carry data-dl-betaonly
there; only the T-Deck and the Heltec V4 + TFT are on the stable feed. Marking a
board Stable in DEVICES.md while the install button pulls a beta build tells a
user the wrong thing about what they are getting. All three now say
"Beta (new in beta_45)", which is the release the three of them debuted in.
Also adds the per-board feature note the Pager was missing: the two radio SKUs
and what happens if you flash the wrong one, and the microSD behaviour
(detected-but-unreadable cards offer a retry; formatting stays a host-side job).
The V4-R8, T-Display P4 and Attaky rows still have no feature note. Left for
someone who has the hardware.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
oumike's gap list. Three of the four are closed here.
"Save update bin to SD" was gated on a list of board names that had grown to
three entries and still left the T-Lora Pager out, despite it having both a card
and OTA. It is now gated on the capability that actually decides it, CAP_SD &&
CAP_OTA (plus the ESP32 / companion conditions it already carried), which is what
device_caps.h exists for: a new board with a card no longer has to remember to
add itself to a list.
Both halves were gated separately - the helper block and the button that uses it
- so widening only the button broke the pager build on undefined symbols. They
are now character-for-character identical, which is the point: they cannot drift
apart again.
Docs were further behind than the issue said. DEVICES.md listed five boards and
we ship ten: the T-Lora Pager, Heltec V4-R8, T-Display P4 and Attaky Mesh Series
were all missing from the support matrix, and the Pager was still sitting under
"Requested boards" with an open issue link. README listed five envs and claimed
the repo covers "the two boards". Both now match what release.sh actually builds.
Still open from #289: the static deploy/flasher/ page carries only two manifests.
Left alone for now - flasher.wadamesh.com redirects to the site flasher, which
generates its manifests from gen-flasher-meta.py and already covers every board,
so that directory may simply be dead. Worth confirming before adding files to it.
All 8 S3 boards build.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
User-facing key map and mode tour in the TLORA_PAGER_SHORTCUTS.md mold:
inputs, the close-what-you-see Back rule, function-key table with hold
actions, map pan, editing, lock screen, apps, and a user-terms summary
of the beta_66-branch navigation improvements. Linked from the README
board list and the DEVICES.md feature note.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
One page with every supported board, its install path, release channel
and maturity, plus the open hardware requests and the channel model.
The README board list now covers all five targets and links there.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
