Kaj SchittecatandClaude Fable 5
a38ea1e3bb
New board: ThinkNode_M9_companion_radio_touch env, variants/thinknode_m9/ (board glue, LR1110 target, keyboard driver, partitions, M9_PORT.md pin reference), boards/thinknode_m9.json, device_caps HAS_THINKNODE_M9 block, HAS_M9_KEYBOARD input path in the touch UI (d-pad focus nav, tab jump keys, QWERTY typing). Based on a contributed bring-up patch by ded (SalishMesh), who also remote- tested every build on a preproduction unit. Hard-won fixes on top of the patch, each verified on hardware: - LR1110 radio init -706: preprod chips run transceiver FW 0x0303, which rejects DriveDiosInSleepMode (0x012A, added in FW 0x0308) that RadioLib 7.x sends unconditionally during begin(). New build-time patch scripts/build/patch_radiolib_lr11x0.py tolerates it on old FW; radio_init() prints the chip's device/FW/errors either way. - TCXO: DIO3 at 3.3 V (the patch's active-oscillator/tcxo=0 theory gave -707 on hardware). - Display: rotation 1 (not 3), plus the missing landscape s_ui_rotation override so LVGL renders 320x240 instead of portrait-into-landscape. - Keyboard: the controller is a separate ESP32-S2 I2C slave (0x6C) with addressed registers - reads select register 0x01 first (bare reads return the HW-version register forever). Boot probe logs the controller's HW/FW; backlight duty register wired. - USB pad release: the keyboard bus lives on GPIO20/21 = the S3's native USB D-/D+ pads, owned from reset by the ROM USB-Serial-JTAG (D+ pullup on SDA). M9Board::begin() releases them before any bus init. - GPIO35-37 are octal-PSRAM pins on the S3R8 - never drive them (the patch's "SD CS = 36" misread package pin 36 = GPIO48; SD is on the shared SPI bus, support returns with PIN_SD_CS=48 later). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
35 lines
1.7 KiB
CSV
35 lines
1.7 KiB
CSV
# Heltec ThinkNode M9 firmware — custom partition table.
|
||
#
|
||
# 16 MB layout with TWO EQUAL OTA app slots so the firmware can self-update
|
||
# (HTTP OTA via the meshcomod proxy). The app region (app0+app1) is split
|
||
# evenly at 3.875 MB each — the firmware is ~2.55 MB, leaving ~1.3 MB of growth
|
||
# headroom per slot. The tiles + spiffs offsets are UNCHANGED from the previous
|
||
# (single-big-app0) layout, so an OTA — or a one-time USB re-flash to install
|
||
# this table — keeps the map tile cache and all user data (prefs / contacts /
|
||
# channels / chat history) intact.
|
||
# - app0 3.875 MB (ota_0) ┐ equal A/B slots; OTA ping-pongs between them
|
||
# - app1 3.875 MB (ota_1) ┘
|
||
# - "tiles" 4.75 MB LittleFS partition (subtype 0x83) for the map tab's
|
||
# slippy-tile pack
|
||
# - spiffs 3.375 MB for user data (/new_prefs, /contacts3, /channels2, chat
|
||
# history)
|
||
#
|
||
# Layout (16 MB total):
|
||
# 0x000000–0x009000 bootloader + partition table
|
||
# 0x009000–0x00E000 nvs (20 KB)
|
||
# 0x00E000–0x010000 otadata (8 KB)
|
||
# 0x010000–0x3F0000 app0 (3.875 MB, ota_0)
|
||
# 0x3F0000–0x7D0000 app1 (3.875 MB, ota_1)
|
||
# 0x7D0000–0xC90000 tiles (4.75 MB, LittleFS, type 0x83) [unchanged]
|
||
# 0xC90000–0xFF0000 spiffs (3.375 MB) [unchanged]
|
||
# 0xFF0000–0x1000000 coredump (64 KB)
|
||
|
||
# Name, Type, SubType, Offset, Size, Flags
|
||
nvs, data, nvs, 0x9000, 0x5000,
|
||
otadata, data, ota, 0xe000, 0x2000,
|
||
app0, app, ota_0, 0x10000, 0x3E0000,
|
||
app1, app, ota_1, 0x3F0000, 0x3E0000,
|
||
tiles, data, 0x83, 0x7D0000, 0x4C0000,
|
||
spiffs, data, spiffs, 0xC90000, 0x360000,
|
||
coredump, data, coredump, 0xFF0000, 0x10000,
|