touch: beta_34 — buffered LoRa receive ON by default (test channel) + core pin core-v1.16.5

Consumes the new core (buffered receive drain task + RX counters, #13 stock payload layout, GPS-date guard). Fork side: - TouchPrefs v33 rx_queue, DEFAULT ON for the test channel (fresh installs + a one-time migrate for upgraders); opt-out toggle 'Buffered receive (experimental)' in Radio & Mesh, applies live. - About live tier shows LoRa RX heard/read/err/late-lost/qdrop, the field evidence for the missed-messages fix. - Spectrum parks/resumes the drain task around raw radio use; MyMesh setParams sequences hold the radio mutex. - TanmatsuLoraRadio: no-op API stubs (P4 keeps its own RX path). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
chore: refresh Mesh America catalog for beta_33
2026-07-06 11:15:52 +02:00 · 2026-07-05 23:50:32 +02:00 · 2026-07-05 23:34:22 +02:00 · 2026-07-05 22:55:42 +02:00 · 2026-07-05 21:13:27 +02:00 · 2026-07-05 21:07:42 +02:00
38 changed files with 2284 additions and 460 deletions
@@ -17,19 +17,19 @@
          "role": "gui",
          "title": "Touch UI",
          "version": {
-            "beta_25": {
-              "notes": "The signal probe reads a live signal to your nearest repeater again. It sends the standard mesh node-discovery request that repeaters actually answer (the same one the Ultra and KiekR apps use), so the signal reading updates. Thanks to Tarmo for decoding the exact packet.\nBluetooth companion reliability, especially messages and repeater / room-server admin. The device no longer floods the Bluetooth link with a per-packet log (USB and Wi-Fi companions still get it), so incoming messages reach the app and admin actions like Manage Regions stop timing out. (Issues #46 and #54.)\nContacts show up right away. A node you discover, even while you're on another screen or one the phone app adds over Bluetooth, now appears in your contact list immediately instead of only after you change the sort. Thanks to 1nerdherder for the report. (Issue #73.)\nManual telemetry and status requests now work on the first tap instead of needing a second. Thanks to Dan Vybiral (@Vybo) for the fix. (Issue #81.)\nOn the emoji picker and quick-chat replies, pressing Esc or the red X now closes just the popup instead of the whole chat screen.\nLock screen: you can now unlock the device after the screen wakes from an incoming message.\nNew \"Advertise on boot\" option in the Advertise app (off by default): turn it on to send one advert when the device powers on, so nearby nodes refresh your details after a reflash. (Issue #76.)\nTanmatsu: Wi-Fi map tiles now download and display, cached to the microSD card.\nTanmatsu: contacts and message history now survive a reboot (moved to the microSD card, so keep a card inserted).\nTanmatsu: fixed the crash that stopped the app from booting; popups now fit the screen and scroll, and keyboard navigation stays inside an open popup.\nThis is the new stable build, promoted from the beta_25 test channel. It includes everything from the beta_22, beta_23, beta_24 and beta_25 test builds.",
+            "beta_33": {
+              "notes": "The freezes with MQTT enabled are gone. Connecting to the broker (DNS lookup, TCP connect, login) could block the device for 2-10 seconds and retried every 15 seconds while the broker was unreachable, all on the UI thread. Connection attempts now run fully in the background, and writes to a broker that stops responding are skipped instead of waited on (the same treatment beta_32 gave phone/web connections). Tip: if your bridge keeps reconnecting, check the broker address and credentials - a healthy connection does not retry.\nThe About page caused a ~0.4 second hitch every second while it was open: computing the firmware image size checksums the whole ~3 MB app in flash and ran twice per refresh. It is now computed once per boot, so About (and its stall list) no longer disturbs the very measurements it shows.\nFavoriting a contact when the favorites list is full (16) now says \"Favorites full (max 16)\" instead of the incorrect \"Removed from favorites\".",
              "files": [
                {
                  "type": "flash-wipe",
                  "name": "wadamesh-heltec-v4-tft-merged.bin",
-                  "url": "https://firmware.wadamesh.com/releases/TOUCH/beta_25/wadamesh-heltec-v4-tft-merged.bin",
+                  "url": "https://firmware.wadamesh.com/releases/TOUCH/beta_33/wadamesh-heltec-v4-tft-merged.bin",
                  "title": "Full install (bootloader + firmware)"
                },
                {
                  "type": "flash-update",
                  "name": "wadamesh-heltec-v4-tft.bin",
-                  "url": "https://firmware.wadamesh.com/releases/TOUCH/beta_25/wadamesh-heltec-v4-tft.bin",
+                  "url": "https://firmware.wadamesh.com/releases/TOUCH/beta_33/wadamesh-heltec-v4-tft.bin",
                  "title": "Update (app only)"
                }
              ]
@@ -49,19 +49,19 @@
          "role": "gui",
          "title": "Touch UI",
          "version": {
-            "beta_25": {
-              "notes": "The signal probe reads a live signal to your nearest repeater again. It sends the standard mesh node-discovery request that repeaters actually answer (the same one the Ultra and KiekR apps use), so the signal reading updates. Thanks to Tarmo for decoding the exact packet.\nBluetooth companion reliability, especially messages and repeater / room-server admin. The device no longer floods the Bluetooth link with a per-packet log (USB and Wi-Fi companions still get it), so incoming messages reach the app and admin actions like Manage Regions stop timing out. (Issues #46 and #54.)\nContacts show up right away. A node you discover, even while you're on another screen or one the phone app adds over Bluetooth, now appears in your contact list immediately instead of only after you change the sort. Thanks to 1nerdherder for the report. (Issue #73.)\nManual telemetry and status requests now work on the first tap instead of needing a second. Thanks to Dan Vybiral (@Vybo) for the fix. (Issue #81.)\nOn the emoji picker and quick-chat replies, pressing Esc or the red X now closes just the popup instead of the whole chat screen.\nLock screen: you can now unlock the device after the screen wakes from an incoming message.\nNew \"Advertise on boot\" option in the Advertise app (off by default): turn it on to send one advert when the device powers on, so nearby nodes refresh your details after a reflash. (Issue #76.)\nTanmatsu: Wi-Fi map tiles now download and display, cached to the microSD card.\nTanmatsu: contacts and message history now survive a reboot (moved to the microSD card, so keep a card inserted).\nTanmatsu: fixed the crash that stopped the app from booting; popups now fit the screen and scroll, and keyboard navigation stays inside an open popup.\nThis is the new stable build, promoted from the beta_25 test channel. It includes everything from the beta_22, beta_23, beta_24 and beta_25 test builds.",
+            "beta_33": {
+              "notes": "The freezes with MQTT enabled are gone. Connecting to the broker (DNS lookup, TCP connect, login) could block the device for 2-10 seconds and retried every 15 seconds while the broker was unreachable, all on the UI thread. Connection attempts now run fully in the background, and writes to a broker that stops responding are skipped instead of waited on (the same treatment beta_32 gave phone/web connections). Tip: if your bridge keeps reconnecting, check the broker address and credentials - a healthy connection does not retry.\nThe About page caused a ~0.4 second hitch every second while it was open: computing the firmware image size checksums the whole ~3 MB app in flash and ran twice per refresh. It is now computed once per boot, so About (and its stall list) no longer disturbs the very measurements it shows.\nFavoriting a contact when the favorites list is full (16) now says \"Favorites full (max 16)\" instead of the incorrect \"Removed from favorites\".",
              "files": [
                {
                  "type": "flash-wipe",
                  "name": "wadamesh-tdeck-merged.bin",
-                  "url": "https://firmware.wadamesh.com/releases/TOUCH/beta_25/wadamesh-tdeck-merged.bin",
+                  "url": "https://firmware.wadamesh.com/releases/TOUCH/beta_33/wadamesh-tdeck-merged.bin",
                  "title": "Full install (bootloader + firmware)"
                },
                {
                  "type": "flash-update",
                  "name": "wadamesh-tdeck.bin",
-                  "url": "https://firmware.wadamesh.com/releases/TOUCH/beta_25/wadamesh-tdeck.bin",
+                  "url": "https://firmware.wadamesh.com/releases/TOUCH/beta_33/wadamesh-tdeck.bin",
                  "title": "Update (app only)"
                }
              ]
@@ -42,7 +42,15 @@
    font-family:'JetBrains Mono',monospace; background:#fff; transition:border-color .15s, color .15s}
  .kicker:hover{border-color:var(--teal); color:var(--ink)}
  .freeline{margin:0 auto 24px; color:var(--mut); font-size:.92rem}
-  .fab-rail{position:fixed; top:16px; z-index:45; display:flex; flex-direction:column; gap:12px}
+  .fab-rail{position:fixed; top:var(--fab-top,16px); z-index:45; display:flex; flex-direction:column; gap:12px}
+  /* dismissible donate banner */
+  .donate-bar{position:sticky; top:0; z-index:50; display:flex; align-items:center; justify-content:center; gap:7px 16px; flex-wrap:wrap;
+    padding:9px 44px; background:var(--ink); color:#fff; font-size:.9rem; line-height:1.4; text-align:center}
+  .donate-bar a{color:#fff; text-decoration:underline; text-underline-offset:2px}
+  .donate-bar .donate-cta{background:var(--teal); color:#fff; text-decoration:none; padding:5px 14px; border-radius:100px; font-weight:650; white-space:nowrap}
+  .donate-bar .donate-cta:hover{background:var(--cyan)}
+  .donate-bar .x{position:absolute; right:12px; top:50%; transform:translateY(-50%); background:none; border:0; color:#fff; font-size:1.5rem; line-height:1; cursor:pointer; opacity:.75; padding:0 4px}
+  .donate-bar .x:hover{opacity:1}
  .fab-rail.left{left:16px} .fab-rail.right{right:16px}
  .fab{width:44px; height:44px; border-radius:50%; display:grid; place-items:center; cursor:pointer;
    background:#fff; border:1px solid var(--line); color:#46525c; box-shadow:0 10px 26px -14px rgba(21,24,30,.45);
@@ -210,6 +218,11 @@
 </style>
 </head>
 <body>
+<div class="donate-bar" id="donateBar">
+  <span>Like the project and want to donate? Help out the <b>MeshCore</b> founders instead. <a href="https://blog.meshcore.io/2026/07/04/help-us-save-meshcore" target="_blank" rel="noopener">Learn more</a></span>
+  <a class="donate-cta" href="https://givealittle.co.nz/cause/help-us-save-meshcore" target="_blank" rel="noopener">Donate</a>
+  <button class="x" id="donateX" type="button" aria-label="Dismiss">&times;</button>
+</div>
 <div id="vanta-bg"></div>

 <!-- floating quick links -->
@@ -480,6 +493,16 @@ We use no tracking, analytics, or advertising cookies. Our CDN and security prov
  try { if (!localStorage.getItem('wm-cookie-ack')) cbar.classList.add('show'); } catch(_) {}
  document.getElementById('cookieok').addEventListener('click', () => { cbar.classList.remove('show'); try { localStorage.setItem('wm-cookie-ack','1'); } catch(_) {} });

+  // ---- donate banner: dismissible; shifts the corner FABs down while shown ----
+  (function(){
+    const bar = document.getElementById('donateBar'); if (!bar) return;
+    function setFabTop(){ document.documentElement.style.setProperty('--fab-top', (getComputedStyle(bar).display === 'none' ? 16 : bar.offsetHeight + 12) + 'px'); }
+    try { if (localStorage.getItem('wm-donate-dismiss') === '1') bar.style.display = 'none'; } catch(_) {}
+    setFabTop();
+    addEventListener('resize', setFabTop);
+    document.getElementById('donateX').addEventListener('click', () => { bar.style.display = 'none'; setFabTop(); try { localStorage.setItem('wm-donate-dismiss','1'); } catch(_) {} });
+  })();
+
  // Live release version + "what's new" — read from the firmware host so the
  // flasher always reflects the current build (the release pipeline updates
  // version.json; no site redeploy needed per release).
@@ -178,7 +178,7 @@ lib_deps =
  ; MeshCore core = the meshcomod monorepo built as a lib, pinned by tag.
  ; Touch-app files (TouchPrefsStore, WifiRuntimeStore, transports, ...) are
  ; vendored in this app's src/ and dropped from the lib via -DMC_VENDORED_TOUCH_APP.
-  https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.16.4
+  https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.16.5
  SPI
  Wire
  jgromes/RadioLib @ ^7.6.0
@@ -349,7 +349,7 @@ build_src_filter =
  +<../variants/lilygo_tdeck/*.cpp>

 lib_deps =
-  https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.16.4
+  https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.16.5
  SPI
  Wire
  jgromes/RadioLib @ ^7.6.0
@@ -1,8 +1,15 @@
-# beta_27 (TEST) — keyboard-backlight control + a Launcher update-button fix, on top of stable beta_25.
-# One user-facing note per non-blank, non-# line; # lines are section comments.
+# beta_27 (STABLE — rolls up the beta_26 + beta_27 test builds on top of the previous stable, beta_25.
+# One user-facing note per non-blank, non-# line; # lines are section comments.)
+
+# --- Fixed ---
+Fixed a reboot loop that could hit while the device saved its contact list. Internal-flash housekeeping during a save could freeze the device long enough to trip the watchdog and restart it; that save no longer trips it. Thanks to the crash report that pinned it down.
+Devices installed under the Launcher no longer show the on-device "Install update" button. That update path only works on a standalone flash; under the Launcher it failed with "won't fit: Bad Size Given". The "update available" note stays, but you update through the Launcher instead. Thanks to Keith (KM1USR) for the report.

 # --- New ---
 Keyboard backlight brightness control on the T-Deck: a live slider plus Off / 25 / 50 / 75 / Max presets in Settings > Keyboard. It dims smoothly (fine-grained at the low end), applies to the on and auto modes and the new-message flash, and survives a reboot. Thanks to Yazutsu (PR #85).

-# --- Fixed ---
-Devices installed under the Launcher no longer show the on-device "Install update" button. That update path only works on a standalone flash; under the Launcher it failed with "won't fit: Bad Size Given". The "update available" note stays, but you update through the Launcher instead. Thanks to Keith (KM1USR) for the report.
+# --- Improved ---
+On devices with a microSD card, contacts and channels are now kept on the card (like chat history and map tiles already are). Your existing contacts move over automatically on first boot; your identity and settings stay in internal flash, so the node is unchanged. Keep the card inserted afterwards - the contact list lives on it, and an older firmware won't look there if you ever downgrade.
+
+# --- Also ---
+This is the new stable build, promoted from the beta_27 test channel. It includes everything from the beta_26 and beta_27 test builds.
@@ -0,0 +1,13 @@
+# beta_28 (TEST) — room-server session fix + the wyvern.red feedback batch, on top of stable beta_27.
+# One user-facing note per non-blank, non-# line; # lines are section comments.
+
+# --- Fixed ---
+Room servers no longer go one-way "frozen". The device now keeps its room login session alive in the background and automatically logs back in when the session drops, so posts keep being delivered and new room messages keep arriving. There is also a new "Log in again" option in the room chat's menu, and a clear warning when the room only granted you read-only access (posts would previously just vanish). Thanks to EricMW61 for the report (issue #89).
+The screen now truly switches off in standby. Before, only the backlight went dark while the panel kept displaying the last image - the actual cause of the LCD ghosting / burn-in some of you noticed. The panel itself now sleeps, and on wake your screen is back instantly. Also: a lit lock screen now always dims on every board, a screen woken by a message re-darkens after 10 seconds, and the lock-screen clock drifts a few pixels to avoid ghosting. Thanks to wyvern.red for pinning this down.
+The on-device "Install update" now also hides on mixed or older partition layouts where an update could crash the device halfway through (found via a user crash report - thanks!).
+
+# --- New ---
+Compact messages (IRC style): a new toggle in chat settings shows one dense line per message instead of bubbles, fitting two to three times more history on screen. Off by default. (wyvern.red's suggestion.)
+Clearer delivery ticks: an up-arrow means sent but not yet confirmed, a double check means the other side confirmed it, and a failed message now says "tap to resend" - one tap resends it. (wyvern.red)
+Keyboard navigation: the scroll keys (F/C) now zoom the map, and backspace in an empty message box exits typing mode so the navigation keys work again. (wyvern.red)
+"Reset path" is now also in the chat's own menu next to Blocked users, so you can force a fresh route without going through Contacts.
@@ -0,0 +1,17 @@
+# beta_29 (TEST) — clock hardening for room servers, BLE repeats-heard fix, deeper SD chat history, one-screen popups. On top of beta_28.
+# One user-facing note per non-blank, non-# line; # lines are section comments.
+
+# --- Fixed ---
+Room logins can no longer be silently locked out by the device clock. Room servers quietly reject anything older than the newest timestamp they have seen from you, so a clock that stepped backwards (a reboot without GPS or phone around, or a sync correcting a fast clock) black-holed every Join with zero feedback. The device now remembers the newest timestamp it has used across reboots so it can never fall behind itself, a Join that gets no reply shows a clear error after 20 seconds (including what the device thinks the time is) instead of spinning forever, and the device warns you when its clock and the room server's clock disagree. Thanks to EricMW61 for the follow-up testing on issue #89.
+"Repeats heard" works again over Bluetooth. The companion app counts repeats from the per-packet RX log, which beta_23 stopped sending over BLE to fix congestion. The firmware now recognises packets that are repeats of your own messages and lets exactly those through to BLE, so the counter works and the congestion fix stays. Thanks to daryldakine for the clean bisect (issue #94).
+Messages sent from the phone app through the device now also appear on the device itself, as your own outgoing message in that channel. This worked for direct messages but never for channels.
+Deleting a chat or channel now sticks. Deleted messages could survive in storage and resurrect the chat later, and removing a channel could miss the underlying channel entry so the thread came right back.
+Settings pages no longer jump down when opened on keyboard-navigation devices, and the red update dot can no longer steal the selection from the About button.
+The update check no longer shows "couldn't reach the update server" for six hours after one failed attempt. It now waits for Wi-Fi to actually have an address and retries within a minute.
+The Tanmatsu About page now shows the real firmware version instead of a stale hardcoded one.
+
+# --- New ---
+Much deeper chat history on devices with an SD card: up to 5000 messages instead of 500, with date separators (Today, Yesterday, day names) between messages from different days. Note for testers: if you later downgrade below beta_29, the older build will not read the larger history file and will start with an empty history.
+Chat and channel rows in the messages tab now use the same compact style as the Contacts tab, fitting more conversations on screen.
+The chat or channel settings sheet (long-press or the gear) now fits on one screen, laid out like the contact menu, instead of scrolling.
+Compact chat mode is easier to read: messages alternate between two background tones.
@@ -0,0 +1,11 @@
+# beta_30 (TEST) — the big-mesh sluggishness fix + a much faster Spectrum analyzer. On top of beta_29.
+# One user-facing note per non-blank, non-# line; # lines are section comments.
+
+# --- Fixed ---
+The periodic multi-second freezes on busy meshes are gone. Saving the contact list to storage took up to 3 seconds at ~570 contacts and ran on the UI thread every couple of minutes, which is exactly the trackball and touch hesitation people felt since beta_25. The save now writes the same data in a few large chunks instead of thousands of tiny ones, cutting it to a fraction. Thanks to guinnessbear for the report and Yazutsu for the precise measurements that pinned this down (issue #82).
+The Contacts tab no longer rebuilds itself every 60 seconds just to refresh the "heard 2h ago" labels - they update in place now. That rebuild cost over a second on large contact lists and could yank the list while you were scrolling.
+A burst of adverts can no longer queue several back-to-back Contacts rebuilds; they are now coalesced.
+
+# --- Improved ---
+The Spectrum analyzer feels live now: the waterfall gets a new line about four times per second instead of once per sweep, the trace advances across the band as it sweeps (like a bench analyzer), and a full sweep is about 20 percent faster.
+The Spectrum trace also scales itself to the signal now: the chart tracks the live minimum and maximum, jumping out instantly for a strong signal (no more clipping flat at the top) and easing back once it is gone.
@@ -0,0 +1,9 @@
+# beta_31 (TEST) — the new chats tab: avatars, message previews, custom channel icons. On top of beta_30.
+# One user-facing note per non-blank, non-# line; # lines are section comments.
+
+# --- New ---
+The chats tab has a fresh look: each conversation now shows a round avatar in that chat's signature colour (the same colour its bubbles use) with the first two letters of the name, the last message previewed under the name, the time top right and the unread count below it. Compact chat mode keeps the dense single-line rows instead, so both styles are available.
+Channels can have a custom icon: open the channel's settings (long-press or the gear) and tap "Chat icon" to pick any emoji as its avatar. Long-press the same entry to go back to the automatic letters. The choice is remembered per channel.
+
+# --- Fixed ---
+Long chat names no longer wrap onto the message preview underneath.
@@ -0,0 +1,9 @@
+# beta_32 (TEST) — the Wi-Fi freeze fix: a stale phone/web connection can no longer stall the device. On top of beta_31.
+# One user-facing note per non-blank, non-# line; # lines are section comments.
+
+# --- Fixed ---
+The 1-2 second freezes every ~10 seconds some users saw with Wi-Fi on are gone. When a phone app or web client was connected over Wi-Fi and that connection went stale (phone asleep, walked out of range), every received mesh packet made the device wait on the dead connection before the UI could continue. The device now only writes to a connection when it can accept data immediately, and a connection that stays unresponsive for 10 seconds straight is dropped so the client can reconnect cleanly.
+Saving chat history could briefly hitch the UI on busy meshes: the history file now writes in a few large chunks instead of thousands of tiny ones (the same treatment the contact list got in beta_30), and background saves are spaced further apart while messages stream in.
+
+# --- New ---
+The About page now shows recent loop stalls (anything over 0.2 seconds, newest first), so freeze reports can be confirmed or ruled out at a glance.
@@ -0,0 +1,7 @@
+# beta_33 (TEST) — the MQTT freeze fix + the About page no longer stalls itself. On top of beta_32.
+# One user-facing note per non-blank, non-# line; # lines are section comments.
+
+# --- Fixed ---
+The freezes with MQTT enabled are gone. Connecting to the broker (DNS lookup, TCP connect, login) could block the device for 2-10 seconds and retried every 15 seconds while the broker was unreachable, all on the UI thread. Connection attempts now run fully in the background, and writes to a broker that stops responding are skipped instead of waited on (the same treatment beta_32 gave phone/web connections). Tip: if your bridge keeps reconnecting, check the broker address and credentials - a healthy connection does not retry.
+The About page caused a ~0.4 second hitch every second while it was open: computing the firmware image size checksums the whole ~3 MB app in flash and ran twice per refresh. It is now computed once per boot, so About (and its stall list) no longer disturbs the very measurements it shows.
+Favoriting a contact when the favorites list is full (16) now says "Favorites full (max 16)" instead of the incorrect "Removed from favorites".
@@ -0,0 +1,11 @@
+# beta_34 (TEST) - buffered receive: the missed-messages fix, ON by default on this test build. On top of beta_33.
+# One user-facing note per non-blank, non-# line; # lines are section comments.
+
+# --- New ---
+This build changes how the device collects packets from the LoRa radio, and the new way is ON by default so the test channel can prove it. Background: the radio chip holds only one received packet at a time, and until now the firmware only collected it when the main loop got around to it, the same loop that draws the screen. If the interface kept the loop busy while two packets arrived back to back, the first one was silently overwritten. That is the "my device missed a message another device right next to it heard" problem some of you reported, and why it affected this firmware but not stock MeshCore, which has no screen to draw. A small dedicated background task now collects every packet within about a millisecond of it arriving, no matter what the interface is doing.
+Because the receive path is the heart of the device, this ships with a safety hatch: if you see anything odd with receiving, sending, or the Spectrum analyzer, turn off "Buffered receive (experimental)" in Settings > Radio & Mesh (applies instantly, no reboot) and you are back on the old path. Please report it either way, that is exactly what the test channel is for.
+The About page now shows LoRa receive counters (heard / read / late-lost). "late-lost" counts packets the radio heard but the firmware failed to collect in time. With buffered receive on it should stay at zero. If you turn the toggle off on a busy mesh you may watch it creep up, which is the old bug happening live.
+
+# --- Fixed ---
+Messages sent by wadamesh no longer carry a few stray bytes at the end that stock MeshCore devices and some companion apps displayed as garbage characters after the text (issue #13).
+A GPS module reporting a bogus date can no longer drag the device clock back to the year 1902 (core clock guard).
@@ -136,6 +136,14 @@ public:
  virtual void onAdminLoginResult(const ContactInfo& contact, bool success, uint8_t perms) {
    (void)contact; (void)success; (void)perms;
  }
+  /** The server's own clock, from the timestamp prefix every server RESPONSE
+   *  carries (first 4 bytes). Fired on LOGIN_OK so the UI can warn when the
+   *  device clock and the server clock disagree — a skewed device clock makes
+   *  the server's replay guard silently drop our logins/posts/keep-alives
+   *  (issue #89). Default no-op. */
+  virtual void onServerClock(const ContactInfo& contact, uint32_t server_epoch) {
+    (void)contact; (void)server_epoch;
+  }
  /** A CLI command reply from a repeater / room server / sensor (the
   *  TXT_TYPE_CLI_DATA path). `text` is the decrypted command output text
   *  the server returned. Default no-op; the touch UI overrides to append
@@ -432,27 +432,67 @@ void DataStore::saveContacts(DataStoreHost* host, bool (*filter)(const ContactIn
    ContactInfo c;
    uint8_t unused = 0;

-    while (host->getContactForSave(idx, c)) {
-      if (filter && !filter(c)) {
+    // Field-by-field writes cost ~12 FS calls per contact — ~7000 tiny writes at
+    // ~570 contacts measured 2.6-3.0 s on SD, freezing the loop/UI for the whole
+    // save (issue #82). Pack the SAME 152-byte records into a heap chunk and
+    // flush in ~5 KB slabs instead: identical file bytes, ~20 large writes, tens
+    // of ms. Falls back to the original per-field path if the alloc fails.
+    static const size_t REC = 152;           // 32+32+1+1+1+4+1+4+64+4+4+4
+    static const size_t CHUNK_RECS = 32;
+    uint8_t* buf = (uint8_t*)malloc(REC * CHUNK_RECS);
+    if (buf) {
+      size_t fill = 0;
+      bool ok = true;
+      while (ok && host->getContactForSave(idx, c)) {
+        if (filter && !filter(c)) {
+          idx++;  // advance to next contact
+          continue;
+        }
+        uint8_t* p = buf + fill;
+        memcpy(p, c.id.pub_key, 32);                       p += 32;
+        memcpy(p, (uint8_t *)&c.name, 32);                 p += 32;
+        *p++ = c.type;
+        *p++ = c.flags;
+        *p++ = unused;
+        memcpy(p, (uint8_t *)&c.sync_since, 4);            p += 4;
+        memcpy(p, (uint8_t *)&c.out_path_len, 1);          p += 1;
+        memcpy(p, (uint8_t *)&c.last_advert_timestamp, 4); p += 4;
+        memcpy(p, c.out_path, 64);                         p += 64;
+        memcpy(p, (uint8_t *)&c.lastmod, 4);               p += 4;
+        memcpy(p, (uint8_t *)&c.gps_lat, 4);               p += 4;
+        memcpy(p, (uint8_t *)&c.gps_lon, 4);               p += 4;
+        fill += REC;
+        if (fill == REC * CHUNK_RECS) {
+          ok = (file.write(buf, fill) == fill);
+          fill = 0;
+        }
        idx++;  // advance to next contact
-        continue;
      }
-      bool success = (file.write(c.id.pub_key, 32) == 32);
-      success = success && (file.write((uint8_t *)&c.name, 32) == 32);
-      success = success && (file.write(&c.type, 1) == 1);
-      success = success && (file.write(&c.flags, 1) == 1);
-      success = success && (file.write(&unused, 1) == 1);
-      success = success && (file.write((uint8_t *)&c.sync_since, 4) == 4);
-      success = success && (file.write((uint8_t *)&c.out_path_len, 1) == 1);
-      success = success && (file.write((uint8_t *)&c.last_advert_timestamp, 4) == 4);
-      success = success && (file.write(c.out_path, 64) == 64);
-      success = success && (file.write((uint8_t *)&c.lastmod, 4) == 4);
-      success = success && (file.write((uint8_t *)&c.gps_lat, 4) == 4);
-      success = success && (file.write((uint8_t *)&c.gps_lon, 4) == 4);
+      if (ok && fill > 0) file.write(buf, fill);
+      free(buf);
+    } else {
+      while (host->getContactForSave(idx, c)) {
+        if (filter && !filter(c)) {
+          idx++;  // advance to next contact
+          continue;
+        }
+        bool success = (file.write(c.id.pub_key, 32) == 32);
+        success = success && (file.write((uint8_t *)&c.name, 32) == 32);
+        success = success && (file.write(&c.type, 1) == 1);
+        success = success && (file.write(&c.flags, 1) == 1);
+        success = success && (file.write(&unused, 1) == 1);
+        success = success && (file.write((uint8_t *)&c.sync_since, 4) == 4);
+        success = success && (file.write((uint8_t *)&c.out_path_len, 1) == 1);
+        success = success && (file.write((uint8_t *)&c.last_advert_timestamp, 4) == 4);
+        success = success && (file.write(c.out_path, 64) == 64);
+        success = success && (file.write((uint8_t *)&c.lastmod, 4) == 4);
+        success = success && (file.write((uint8_t *)&c.gps_lat, 4) == 4);
+        success = success && (file.write((uint8_t *)&c.gps_lon, 4) == 4);

-      if (!success) break; // write failed
+        if (!success) break; // write failed

-      idx++;  // advance to next contact
+        idx++;  // advance to next contact
+      }
    }
    file.close();
  }
@@ -21,7 +21,9 @@
 #include <WiFi.h>
 #endif
 #ifdef MULTI_TRANSPORT_COMPANION
-#include <helpers/esp32/MultiTransportCompanionInterface.h>
+// QUOTED on purpose: the vendored core lib ships a STALE copy of this header in its
+// include path (no bleAllowNextRxLog); quotes force the local src/ copy we compile.
+#include "helpers/esp32/MultiTransportCompanionInterface.h"
 #include "helpers/esp32/MqttBridge.h"
 #endif
 #endif
@@ -135,6 +137,15 @@ static int s_companion_ota_pinned_reply_target = -1;
 #define DIRECT_SEND_PERHOP_FACTOR       6.0f
 #define DIRECT_SEND_PERHOP_EXTRA_MILLIS 250
 #define LAZY_CONTACTS_WRITE_DELAY       5000
+// Our self-chosen room-session keep-alive interval (secs). Room servers zero the
+// legacy suggested-interval field in LOGIN_OK, so the client picks. 128 is the
+// value upstream itself recommended while the field was live (CLIENT_KEEP_ALIVE_SECS
+// 128, disabled 2025-06 rather than tuned) — matching it stays friendly to the
+// server's TODO'd "throttle keep-alives, evict fast pingers" heuristic. The core
+// expires the connection at 2.5x (320 s) without an ACK; every received room push
+// also counts as activity (markConnectionActive), so a busy room barely pings at
+// all. One 9-byte direct REQ + 5-byte ACK per interval — negligible airtime.
+#define ROOM_KEEPALIVE_SECS             128

 #define PUBLIC_GROUP_PSK                "izOH6cXN6mrJ5e26oRXNcg=="

@@ -1475,7 +1486,14 @@ void MyMesh::logRxRaw(float snr, float rssi, const uint8_t raw[], int len) {
      if (poff < len) {
        // last path hop = the repeater whose re-flood our radio just heard
        const uint8_t* lasthop = (cnt_p >= 1) ? (raw + poff - hsz_p) : nullptr;
-        uiCountEcho(fnv1a32(raw + poff, len - poff), lasthop, lasthop ? hsz_p : 0);
+        if (uiCountEcho(fnv1a32(raw + poff, len - poff), lasthop, lasthop ? hsz_p : 0)) {
+#if defined(ESP32) && defined(MULTI_TRANSPORT_COMPANION)
+          // Echo of OUR OWN send: let this one RX-log frame through to BLE too.
+          // The app's "Repeats heard" is computed exactly from these (issue #94)
+          // and a few frames per send can't re-create the #46/#54 BLE flood.
+          MultiTransportCompanionInterface::bleAllowNextRxLog();
+#endif
+        }
      }
    }
  }
@@ -2239,6 +2257,16 @@ void MyMesh::onContactResponse(const ContactInfo &contact, const uint8_t *data,
      uint16_t keep_alive_secs = ((uint16_t)data[5]) * 16;
      if (keep_alive_secs > 0) {
        startConnection(contact, keep_alive_secs);
+      } else if (contact.type == ADV_TYPE_ROOM) {
+        // Modern room servers zero the legacy keep-alive field (simple_room_server:
+        // `reply_data[5] = 0; // Legacy`), so no connection was ever armed and we
+        // never pinged. The server still NEEDS to hear from us: its push loop
+        // abandons a client after 3 unACKed pushes (`push_failures < 3`) and only a
+        // received transmission — a post, or exactly this REQ_TYPE_KEEP_ALIVE —
+        // resets the counter (issue #89: rooms went one-way-dead). Arm our own
+        // interval; checkConnections() in loop() does the rest (9-byte direct REQ,
+        // its ACK also refreshes the server's last_activity for us).
+        startConnection(contact, ROOM_KEEPALIVE_SECS);
      }
      out_frame[i++] = PUSH_CODE_LOGIN_SUCCESS;
      out_frame[i++] = data[6]; // permissions (eg. is_admin)
@@ -2266,6 +2294,10 @@ void MyMesh::onContactResponse(const ContactInfo &contact, const uint8_t *data,
    // Notify the touch UI so the admin console can flip from "logging in…"
    // to the prompt (success) or show "wrong password" (fail). Same data
    // the companion app sees via PUSH_CODE_LOGIN_SUCCESS/_FAIL.
+    // On LOGIN_OK also hand it the server's clock (`tag` = the timestamp prefix
+    // of every server response) so it can warn about device-vs-server skew —
+    // skew is what makes the server's replay guard silently eat us (#89).
+    if (_ui && ok) _ui->onServerClock(contact, tag);
    if (_ui) _ui->onAdminLoginResult(contact, ok, perms);
 #endif
  } else if (len > 4 && // check for status response
@@ -2507,7 +2539,11 @@ MyMesh::MyMesh(mesh::Radio &radio, mesh::RNG &rng, mesh::RTCClock &rtc, SimpleMe
 }

 void MyMesh::applyRadioFromPrefs() {
+  // setParams is a multi-step SPI sequence; hold the radio against the buffered-
+  // receive drain task so it can't re-arm RX between the steps (no-op when off).
+  radio_driver.radioAcquire();
  radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
+  radio_driver.radioRelease();
  radio_driver.setTxPower(_prefs.tx_power_dbm);
 #if defined(USE_SX1262) || defined(USE_SX1268)
  _prefs.rx_boosted_gain = _prefs.rx_boosted_gain ? 1 : 0;
@@ -2956,12 +2992,13 @@ void MyMesh::handleCmdFrame(size_t len) {
      bool success = getChannel(channel_idx, channel);
      if (success && sendGroupMessage(msg_timestamp, channel.channel, _prefs.node_name, text, len - i)) {
        writeOKFrame();
-#if defined(HAS_TANMATSU)
        // Mirror the app-sent channel message into the on-device touch UI — the channel-send path
        // otherwise never shows companion-originated channel sends on screen (the DM path does, via
        // appSentMsgToContact). NUL-terminate the text in-place first, exactly as the DM path does.
+        // ALL boards — this sat behind HAS_TANMATSU from its beta_17 birth, so T-Deck/V4 users
+        // never saw their own app-sent channel posts on the device. Repeater echoes of our own
+        // flood can't double the bubble: the dispatcher's seen-packet table drops them pre-ingest.
        if (_ui) { cmd_frame[len] = 0; _ui->appSentMsgToChannel(channel.name, text); }
-#endif
        // Sent channel messages are not added to shared history / broadcast: channel_idx and
        // frame format are device-specific and clients (e.g. HA) without channel support can
        // misparse or show "text as sender"; also avoids failed-to-sync when versions differ.
@@ -3305,10 +3342,12 @@ void MyMesh::handleCmdFrame(size_t len) {
      _prefs.client_repeat = repeat;
      savePrefs();

+      radio_driver.radioAcquire();   // hold off the RX drain task mid-sequence (no-op when off)
      radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
 #if defined(USE_SX1262) || defined(USE_SX1268) || defined(SX126X_RX_BOOSTED_GAIN)
      radio_driver.setRxBoostedGainMode(_prefs.rx_boosted_gain != 0);
 #endif
+      radio_driver.radioRelease();
      MESH_DEBUG_PRINTLN("OK: CMD_SET_RADIO_PARAMS: f=%d, bw=%d, sf=%d, cr=%d", freq, bw, (uint32_t)sf,
                         (uint32_t)cr);

@@ -4368,6 +4407,17 @@ void MyMesh::checkSerialInterface() {
 void MyMesh::loop() {
  BaseChatMesh::loop();

+  // Session keep-alives for logged-in servers (rooms). The core pinger sends the
+  // 9-byte REQ_TYPE_KEEP_ALIVE (+ our sync_since) a room server expects; the ACK
+  // back refreshes the server's last_activity for us AND resets its push_failures
+  // counter — without it the server abandons a client after any 3 unacknowledged
+  // post pushes and never pushes again (simple_room_server: `push_failures < 3`
+  // gate in its round-robin push loop), which reads as a one-way-frozen room
+  // (issue #89). Upstream left this call commented out ("deprecate the
+  // Connections stuff"); the on-device room UI needs it. Cheap: scans 16 slots,
+  // transmits only when a connection is armed and due (see the room login branch).
+  checkConnections();
+
  if (_cli_rescue) {
    checkCLIRescueCmd();
  } else {
@@ -380,6 +380,29 @@ public:
    return r;
  }

+  /** Is a keep-alive session to this server currently armed and alive?
+   *  (Room chat UI: the core frees the slot 2.5x the interval after the last
+   *  ACK/activity, so false = the session needs a re-login.) */
+  bool uiHasConnectionTo(const uint8_t pub_key[32]) { return hasConnectionTo(pub_key); }
+
+  /** Re-login to a room server WITHOUT a password. For a client already in the
+   *  room's ACL a blank login replies LOGIN_OK with the stored permissions and
+   *  skips the login replay guard (simple_room_server onAnonDataRecv, blank-
+   *  password branch) — and when it arrives flooded the server also resets its
+   *  stale out_path to us. The blank login itself resets NOTHING else server-side
+   *  (not push_failures, not last_activity); the actual heal is the chain it
+   *  starts: LOGIN_OK -> onContactResponse arms the room keep-alive -> the first
+   *  REQ_TYPE_KEEP_ALIVE refreshes the server's last_activity and clears its
+   *  push-abandon counter, so pushes resume (issue #89: self-heal + the chat
+   *  sheet's "Log in again"). NOTE it cannot recover a server that REBOOTED
+   *  (non-admin ACL entries aren't persisted there) — that needs a passworded
+   *  Join from the Contacts sheet. */
+  int uiRoomRelogin(const uint8_t pub_key[32]) {
+    ContactInfo* c = lookupContactByPubKey(pub_key, PUB_KEY_SIZE);
+    if (!c || c->type != ADV_TYPE_ROOM) return MSG_SEND_FAILED;
+    return uiSendAdminLogin(*c, "");
+  }
+
  /** Send a CLI command line to a previously-logged-in repeater / room
   *  server. The reply lands in AbstractUITask::onAdminCommandReply via
   *  queueMessage when the server returns a TXT_TYPE_CLI_DATA frame.
@@ -564,7 +587,10 @@ public:
  /** Count one echo of fingerprint `fp` (called from logRxRaw on a match). `hop`
   *  (optional) is the re-flooding repeater's hash — the echo's last path hop —
   *  recorded deduped + bounded so the sent-message Info can name the repeaters. */
-  void uiCountEcho(uint32_t fp, const uint8_t* hop = nullptr, uint8_t hop_sz = 0) {
+  /** Returns true when `fp` matched one of OUR recent sends (i.e. this RX is an
+   *  echo of our own flood) — logRxRaw uses that to let the frame through to BLE
+   *  for the app's "Repeats heard" (issue #94). */
+  bool uiCountEcho(uint32_t fp, const uint8_t* hop = nullptr, uint8_t hop_sz = 0) {
    for (int i = 0; i < UI_ECHO_SLOTS; i++)
      if (_echo_fp[i] == fp) {
        if (_echo_rep[i] < 255) _echo_rep[i]++;
@@ -579,8 +605,9 @@ public:
            _echo_hop_n[i]++;
          }
        }
-        return;
+        return true;
      }
+    return false;
  }
  /** True once if a repeat was counted since the last call — the UI uses this
   *  to refresh the chat so the bubble's repeat tag updates live. */
@@ -0,0 +1,55 @@
+#pragma once
+
+#include <helpers/AutoDiscoverRTCClock.h>
+
+// Monotonic clock floor for outgoing protocol timestamps (issue #89 follow-up).
+//
+// MeshCore servers keep a per-client "newest timestamp seen" high-water mark and
+// silently drop anything at-or-below it (replay guard) — and since beta_28 our
+// room keep-alives refresh that mark every ~2 minutes. A device clock that steps
+// BACKWARD (reboot without GPS/phone around, or a sync correcting a fast clock)
+// therefore black-holes every login/post/keep-alive with zero feedback. None of
+// our boards has a battery-backed RTC chip, so a power cycle without a time
+// source is exactly such a step.
+//
+// getCurrentTime() ratchets: it never returns less than the highest value it has
+// ever returned — and getCurrentTimeUnique() (which stamps every login, post and
+// keep-alive in the core) builds directly on it. The ratchet is seeded from a
+// persisted copy at boot and written back rate-capped (see the UITask wiring +
+// touchPrefsGet/SetClockFloor), so it survives power loss.
+//
+// Two escape hatches keep a WRONG-future clock from sticking forever:
+//   • setCurrentTime() rejects anything below MIN_VALID_EPOCH, whatever the
+//     source — this centrally kills the 1902/1970-class garbage sets (GPS date
+//     bugs, unset system clocks) for every path: GPS NMEA, phone CMD, NTP.
+//   • a set that lands more than TRUSTED_BACK_CAP below the floor pulls the
+//     floor down to it: a >10 min backward correction means the floor itself was
+//     built on a bad clock, and freezing time for hours to bridge it would be
+//     worse than the one-time server re-lock it avoids (which the login skew
+//     warning surfaces to the user anyway).
+class ClockFloorRTC : public AutoDiscoverRTCClock {
+  uint32_t _floor = 0;
+public:
+  ClockFloorRTC(mesh::RTCClock& fallback) : AutoDiscoverRTCClock(fallback) {}
+
+  static constexpr uint32_t MIN_VALID_EPOCH  = 1715770351UL;  // 15 May 2024 — the core's own unset-clock seed
+  static constexpr uint32_t TRUSTED_BACK_CAP = 10UL * 60UL;
+
+  uint32_t getCurrentTime() override {
+    uint32_t t = AutoDiscoverRTCClock::getCurrentTime();
+    if (t < _floor) return _floor;
+    _floor = t;
+    return t;
+  }
+
+  void setCurrentTime(uint32_t time) override {
+    if (time < MIN_VALID_EPOCH) return;   // garbage set — ignore, whatever the source
+    AutoDiscoverRTCClock::setCurrentTime(time);
+    if (_floor > time + TRUSTED_BACK_CAP) _floor = time;
+  }
+
+  // Boot-time seed from the persisted floor (only ever raises), and the getter
+  // the persister reads back. Benign u32 races: both cores may touch _floor.
+  void seedFloor(uint32_t persisted) { if (persisted > _floor) _floor = persisted; }
+  uint32_t getFloor() const { return _floor; }
+};
@@ -10,11 +10,30 @@ MqttBridge mqtt_bridge;
 #include <WiFi.h>
 #include <stdio.h>
 #include <string.h>
+#include <lwip/sockets.h>
 #include "esp_random.h"
 #include "mbedtls/gcm.h"
 #include "mbedtls/md.h"
 #include "mbedtls/base64.h"

+// Only hand bytes to lwIP when the socket can accept them right now (zero-timeout
+// select). Otherwise WiFiClient::write() blocks in 1 s select() retries against a
+// broker that stopped ACKing — on the loop thread that is a visible UI freeze per
+// publish. A refused write fails the publish; PubSubClient then flags the
+// connection down and the (async) reconnect path takes over.
+size_t MqttNbClient::write(const uint8_t* buf, size_t size) {
+    int fd_ = fd();
+    if (fd_ < 0) return 0;
+    fd_set wset;
+    FD_ZERO(&wset);
+    FD_SET(fd_, &wset);
+    struct timeval tv;
+    tv.tv_sec = 0;
+    tv.tv_usec = 0;
+    if (select(fd_ + 1, NULL, &wset, NULL, &tv) <= 0 || !FD_ISSET(fd_, &wset)) return 0;
+    return WiFiClient::write(buf, size);
+}
+
 // Read every field from the "mqtt" NVS namespace into the members. isKey() guards
 // avoid the [E] NOT_FOUND log spam that getString emits for absent keys on the
 // USB-CDC companion stream (see TouchPrefsStore prefsGetStr note).
@@ -86,13 +105,27 @@ bool MqttBridge::reconnect() {
    return ok;
 }

+// reconnect() blocks on DNS + TCP connect + CONNACK (2-10 s against an unreachable
+// broker) — never run it on the loop thread, it drives LVGL. One-shot task instead;
+// _connecting hands _mqtt/_wc to the task and back.
+void MqttBridge::reconnectTask(void* arg) {
+    MqttBridge* self = (MqttBridge*)arg;
+    self->reconnect();
+    self->_connecting = false;
+    vTaskDelete(nullptr);
+}
+
 void MqttBridge::loop() {
-    if (!_enabled) return;
+    if (!_enabled || _connecting) return;
    if (!_mqtt.connected()) {
        uint32_t now = millis();
        if ((uint32_t)(now - _lastReconnectMs) >= RECONNECT_INTERVAL_MS) {
            _lastReconnectMs = now;
-            reconnect();
+            _connecting = true;
+            if (xTaskCreatePinnedToCore(reconnectTask, "mqtt_conn", 6144, this,
+                                        1, nullptr, 0) != pdPASS) {
+                _connecting = false;   // task OOM — try again next interval
+            }
        }
        return;
    }
@@ -128,7 +161,7 @@ bool MqttBridge::sealToB64(const char* plain, char* out, size_t outCap) {
 }

 void MqttBridge::pub(const char* subtopic, const char* json) {
-    if (!_enabled || !_mqtt.connected()) return;
+    if (!_enabled || _connecting || !_mqtt.connected()) return;
    char topic[80];
    snprintf(topic, sizeof(topic), "wadamesh/%s/%s", _nodeHex, subtopic);
    if (_encOn) {
@@ -158,7 +191,7 @@ void MqttBridge::escapeJson(const char* src, char* dst, size_t dstLen) {

 void MqttBridge::publishDM(const char* senderName, const uint8_t* senderKey32,
                            float snr, uint8_t hops, uint32_t ts, const char* text) {
-    if (!_enabled || !_pubDm || !_mqtt.connected()) return;   // DMs are opt-in
+    if (!_enabled || !_pubDm || _connecting || !_mqtt.connected()) return;   // DMs are opt-in
    char keyHex[13] = {};
    for (int i = 0; i < 6; ++i) snprintf(keyHex + i * 2, 3, "%02x", senderKey32[i]);

@@ -175,7 +208,7 @@ void MqttBridge::publishDM(const char* senderName, const uint8_t* senderKey32,

 void MqttBridge::publishChannel(int channelIdx, const char* channelName,
                                 float snr, uint8_t hops, uint32_t ts, const char* text) {
-    if (!_enabled || !_pubChannel || !_mqtt.connected()) return;   // channel publish toggle
+    if (!_enabled || !_pubChannel || _connecting || !_mqtt.connected()) return;   // channel publish toggle
    char safeName[48], safeText[300];
    escapeJson(channelName, safeName, sizeof(safeName));
    escapeJson(text,        safeText, sizeof(safeText));
@@ -204,6 +237,10 @@ void MqttBridge::saveConfig(const char* host, uint16_t port,
 }

 void MqttBridge::reloadConfig() {
+    // A connect attempt may be in flight on the one-shot task; PubSubClient is not
+    // thread-safe, so wait it out (bounded: DNS + TCP + CONNACK <= ~10 s, and it
+    // only overlaps when Save lands inside an attempt window on a dead broker).
+    while (_connecting) delay(10);
    if (_mqtt.connected()) _mqtt.disconnect();
    loadConfig();
    if (!_enabled) { Serial.println("[MQTT] disabled"); return; }
@@ -24,6 +24,17 @@ public:
 #include <PubSubClient.h>
 #include <WiFiClient.h>

+// WiFiClient whose write() refuses to enter the framework's blocking-select path:
+// bytes are only handed to lwIP when the socket can take them right now, so a
+// wedged broker connection (half-open socket, peer stopped ACKing) fails the
+// publish instead of stalling the loop thread ~1 s per write attempt. Same probe
+// as the TCP/WS companion servers.
+class MqttNbClient : public WiFiClient {
+public:
+    size_t write(const uint8_t* buf, size_t size) override;
+    size_t write(uint8_t b) override { return write(&b, 1); }
+};
+
 // Publishes received mesh messages to an MQTT broker over the existing WiFi link.
 //
 // PRIVACY MODEL (mirrors how Meshtastic's MQTT module guards content):
@@ -73,7 +84,7 @@ public:
    void reloadConfig();

 private:
-    WiFiClient   _wc;
+    MqttNbClient _wc;
    PubSubClient _mqtt{_wc};
    char     _nodeHex[13] = {};   // 6-byte key → 12 hex chars + '\0'
    bool     _enabled     = false;
@@ -87,12 +98,16 @@ private:
    bool     _encOn       = false;
    uint16_t _port        = 1883;
    uint32_t _lastReconnectMs = 0;
+    // True while the one-shot connect task owns _mqtt/_wc. The loop thread must
+    // not touch either until it clears (PubSubClient is not thread-safe).
+    volatile bool _connecting = false;

    static const uint32_t RECONNECT_INTERVAL_MS = 15000;

    void loadConfig();             // shared by begin() / reloadConfig()
    void deriveKey();              // _key = SHA-256(_psk); sets _encOn
    bool reconnect();
+    static void reconnectTask(void* arg);   // one-shot task body wrapping reconnect()
    void pub(const char* subtopic, const char* json);  // seals if _encOn
    bool sealToB64(const char* plain, char* out, size_t outCap);
    static void escapeJson(const char* src, char* dst, size_t dstLen);
@@ -4,9 +4,12 @@
 #include <string.h>

 // Companion push code for the per-packet RX log (matches MyMesh.cpp). It is kept OFF
-// the BLE transport in writeFrameToAll — see the note there (issues #46, #54).
+// the BLE transport in writeFrameToAll — see the note there (issues #46, #54) — EXCEPT
+// for one-shot passes armed via bleAllowNextRxLog() (echoes of our own sends, #94).
 #define PUSH_CODE_LOG_RX_DATA   0x88

+bool MultiTransportCompanionInterface::s_ble_rxlog_once = false;
+
 MultiTransportCompanionInterface::MultiTransportCompanionInterface()
  : _tcp_port(0), _ws_port(0), _tcp_started(false), _ws_started(false), _tcp_enabled(true), _isEnabled(false), _broadcast(false), _last_reply_target(REPLY_TARGET_USB), _ota_tcp_suspended(false), _ota_ws_suspended(false), _ota_ws_listen_paused(false)
 #ifdef BLE_PIN_CODE
@@ -334,10 +337,16 @@ size_t MultiTransportCompanionInterface::writeFrameToAll(const uint8_t src[], si
    all_ok = false;
 #ifdef BLE_PIN_CODE
  // The per-packet RX log floods BLE's ~16 frames/sec budget on a busy mesh, starving
-  // the frames that matter — chat messages + admin responses (issues #46, #54). The
-  // MeshCore app doesn't consume the RX log, so keep it OFF BLE; USB/TCP/WS (far more
-  // bandwidth) still receive it for the on-device Monitor app / diagnostics.
-  const bool skip_ble = (len > 0 && src[0] == PUSH_CODE_LOG_RX_DATA);
+  // the frames that matter — chat messages + admin responses (issues #46, #54). So it
+  // is kept OFF BLE (USB/TCP/WS have the bandwidth) — EXCEPT when MyMesh::logRxRaw
+  // armed a one-shot pass because this frame is an echo of OUR OWN flood send: the
+  // app's "Repeats heard" is computed exactly from those (it broke on BLE when the
+  // blanket skip landed in beta_23 — issue #94), and a few echoes per send are
+  // nowhere near the flood that caused #46/#54.
+  const bool rxlog    = (len > 0 && src[0] == PUSH_CODE_LOG_RX_DATA);
+  const bool ble_pass = rxlog && s_ble_rxlog_once;
+  if (rxlog) s_ble_rxlog_once = false;                // consume the one-shot either way
+  const bool skip_ble = rxlog && !ble_pass;
  if (!skip_ble && _ble_begun && _ble_enabled && _ble.isConnected() && _ble.writeFrame(src, len) != len)
    all_ok = false;
 #endif
@@ -64,6 +64,13 @@ public:
  bool isWriteBusy() const override;
  size_t writeFrame(const uint8_t src[], size_t len) override;
  size_t writeFrameToAll(const uint8_t src[], size_t len) override;
+  /** One-shot: let the NEXT RX-log frame (PUSH_CODE_LOG_RX_DATA) through to BLE.
+   *  RX logs are normally kept OFF BLE (#46/#54 congestion), but the app's
+   *  "Repeats heard" is computed from them — MyMesh::logRxRaw calls this right
+   *  before writeFrameToAll when the frame is an echo of OUR OWN send, so BLE
+   *  gets exactly the few frames the app needs and none of the flood (#94).
+   *  Same-thread set-then-consume (both in the mesh loop), so no atomics. */
+  static void bleAllowNextRxLog() { s_ble_rxlog_once = true; }
  bool companionUnsolicitedPushesBroadcastToAll() const override { return _broadcast; }
  size_t checkRecvFrame(uint8_t dest[]) override;

@@ -73,6 +80,10 @@ public:
  int getReplyTarget() const override { return _last_reply_target; }
  void setReplyTarget(int target) override { _last_reply_target = target; }

+private:
+  static bool s_ble_rxlog_once;   // one-shot BLE pass for the next RX-log frame (#94)
+public:
+
 private:
  int _clientIdSlot() const;
  static const size_t _max_client_id_len = 32;
@@ -1,20 +1,44 @@
 #include "TCPCompanionServer.h"

+#include <lwip/sockets.h>
+
 #define RECV_STATE_IDLE        0
 #define RECV_STATE_HDR_FOUND   1
 #define RECV_STATE_LEN1_FOUND  2
 #define RECV_STATE_LEN2_FOUND  3
 #define TCP_WRITE_TIMEOUT_MS   120
+#define TCP_WEDGED_DROP_MS     10000
+
+// True when lwIP can accept bytes for this socket right now. select() only reports
+// writable once at least TCP_SNDLOWAT (~2.8 KB) of send buffer is free, which holds a
+// whole companion frame (MAX_FRAME_SIZE + header), so a write issued after this probe
+// completes without blocking. Without the probe, WiFiClient::write() sits in 1 s
+// select() waits (up to 10) against a peer that stopped ACKing — a phone asleep in a
+// pocket keeps its socket "connected" but unwritable, and every mesh-RX push then
+// stalls the loop thread (and the UI) for seconds.
+static bool socketWritableNow(WiFiClient& client) {
+  int fd = client.fd();
+  if (fd < 0) return false;
+  fd_set wset;
+  FD_ZERO(&wset);
+  FD_SET(fd, &wset);
+  struct timeval tv;
+  tv.tv_sec = 0;
+  tv.tv_usec = 0;
+  return select(fd + 1, NULL, &wset, NULL, &tv) > 0 && FD_ISSET(fd, &wset);
+}

 static bool writeAllBytes(WiFiClient& client, const uint8_t* buf, size_t len, uint32_t timeout_ms) {
  size_t sent = 0;
  uint32_t start = millis();
  while (sent < len) {
    if (!client.connected()) return false;
-    size_t n = client.write(buf + sent, len - sent);
-    if (n > 0) {
-      sent += n;
-      continue;
+    if (socketWritableNow(client)) {
+      size_t n = client.write(buf + sent, len - sent);
+      if (n > 0) {
+        sent += n;
+        continue;
+      }
    }
    if (millis() - start >= timeout_ms) return false;
    delay(1);
@@ -26,6 +50,7 @@ TCPCompanionServer::TCPCompanionServer() : _server(WiFiServer()), _port(0), _pol
  for (int i = 0; i < TCP_COMPANION_MAX_CLIENTS; i++) {
    _clients[i].state = RECV_STATE_IDLE;
    _clients[i].in_use = false;
+    _clients[i].stall_ms = 0;
  }
 }

@@ -60,6 +85,7 @@ void TCPCompanionServer::acceptNewClients() {
      _clients[slot].in_use = true;
      _clients[slot].state = RECV_STATE_IDLE;
      _clients[slot].rx_len = 0;
+      _clients[slot].stall_ms = 0;
    } else {
      incoming.stop();
    }
@@ -81,6 +107,7 @@ void TCPCompanionServer::disconnectClient(int client_index) {
    _clients[client_index].client.stop();
    _clients[client_index].in_use = false;
    _clients[client_index].state = RECV_STATE_IDLE;
+    _clients[client_index].stall_ms = 0;
  }
 }

@@ -160,10 +187,21 @@ size_t TCPCompanionServer::writeToClient(int client_index, const uint8_t src[],
  WiFiClient* cl = &_clients[client_index].client;
  if (!writeAllBytes(*cl, hdr, 3, TCP_WRITE_TIMEOUT_MS) ||
      !writeAllBytes(*cl, src, len, TCP_WRITE_TIMEOUT_MS)) {
-    // Return 0 so caller can retry (e.g. contact list). Do not disconnect on transient
-    // buffer full; companion layer retries and will complete the sequence.
+    // Return 0 so caller can retry (e.g. contact list). A transient full buffer must
+    // not disconnect — the companion layer retries and completes the sequence. But a
+    // peer that stopped ACKing (phone asleep, walked out of range) keeps a half-open
+    // socket "connected" indefinitely while staying unwritable; drop it once the
+    // failure has been continuous for TCP_WEDGED_DROP_MS so it stops eating the
+    // write-timeout budget on every pushed frame.
+    TCPClientState* c = &_clients[client_index];
+    if (c->stall_ms == 0) {
+      c->stall_ms = millis() | 1;
+    } else if (millis() - c->stall_ms >= TCP_WEDGED_DROP_MS) {
+      disconnectClient(client_index);
+    }
    return 0;
  }
+  _clients[client_index].stall_ms = 0;
  return len;
 }

@@ -15,6 +15,7 @@ struct TCPClientState {
  uint16_t rx_len;
  uint8_t rx_buf[MAX_FRAME_SIZE];
  bool in_use;
+  uint32_t stall_ms;   // start of a continuous write-failure run; 0 = healthy
 };

 // Multi-client TCP server for companion protocol. Same frame format as serial.
@@ -35,7 +35,7 @@ static bool s_begun = false;
 // short read (→ treat as absent → defaults); `ver` lets later builds add fields.
 static const char* KEY_CFG = "cfg";
 static const uint16_t TOUCH_CFG_MAGIC = 0x5743;   // 'WC' (WadaCfg)
-static const uint8_t  TOUCH_CFG_VER   = 30;  // v2 sig_probe/poll; v3 tz_zone; v4 hide_node_name; v5 map_night/map_zoom; v6 map text/marker visibility; v7 app_grid_large; v8 ui_scale; v9 tb_keypad; v10 sleep_idle; v11 nav_keys; v12 map_zoom_buttons; v13 nav_dir_keys; v14 home_is_drawer; v15 kbd_nav default ON (one-time migrate); v16 nav_scroll_keys; v17 notify_new_contact; v18 kbd_nav OFF by default (reverses v15; T-Deck/V4 only, Tanmatsu stays on); v19 show_sensors_tab; v20 map_show_links; v21 map_style (0=OSM default, 1=OpenTopoMap); v22 tb_nav; v23 scope_direct (opt-in: scope direct/login floods to the region); v24 tb_nav default OFF (experimental); v25 fem_lna (Heltec V4.3 high-gain FEM LNA, opt-in); v26 msg_flash (flash keyboard backlight + wake screen on a new message, opt-in); v27 flood_adv_hrs + local_adv_min (periodic self-advert intervals, the standard MeshCore flood/local advert on a timer); v28 beta_updates (opt-in to test/beta firmware on the OTA update check + install); v29 ui_scale default -> Large/150% (Tanmatsu; bumps the old 100% default, leaves an explicit Large/Huge choice); v30 boot_advert (opt-in one-shot flood self-advert ~6s after boot, all boards, #76)
+static const uint8_t  TOUCH_CFG_VER   = 33;  // v2 sig_probe/poll; v3 tz_zone; v4 hide_node_name; v5 map_night/map_zoom; v6 map text/marker visibility; v7 app_grid_large; v8 ui_scale; v9 tb_keypad; v10 sleep_idle; v11 nav_keys; v12 map_zoom_buttons; v13 nav_dir_keys; v14 home_is_drawer; v15 kbd_nav default ON (one-time migrate); v16 nav_scroll_keys; v17 notify_new_contact; v18 kbd_nav OFF by default (reverses v15; T-Deck/V4 only, Tanmatsu stays on); v19 show_sensors_tab; v20 map_show_links; v21 map_style (0=OSM default, 1=OpenTopoMap); v22 tb_nav; v23 scope_direct (opt-in: scope direct/login floods to the region); v24 tb_nav default OFF (experimental); v25 fem_lna (Heltec V4.3 high-gain FEM LNA, opt-in); v26 msg_flash (flash keyboard backlight + wake screen on a new message, opt-in); v27 flood_adv_hrs + local_adv_min (periodic self-advert intervals, the standard MeshCore flood/local advert on a timer); v28 beta_updates (opt-in to test/beta firmware on the OTA update check + install); v29 ui_scale default -> Large/150% (Tanmatsu; bumps the old 100% default, leaves an explicit Large/Huge choice); v30 boot_advert (opt-in one-shot flood self-advert ~6s after boot, all boards, #76); v31 compact_chat (opt-in IRC-style dense chat rows instead of bubbles); v32 clock_floor (highest epoch handed out — monotonic send-timestamp floor across reboots, #89); v33 rx_queue (buffered LoRa receive: drain task + packet ring, experimental, default OFF)

 // Defaults (kept identical to the historical per-key defaults).
 static const uint16_t DEFAULT_SCREEN_TIMEOUT_S = 20;
@@ -100,6 +100,9 @@ struct __attribute__((packed)) TouchCfg {
  uint16_t local_adv_min;     // periodic zero-hop self-advert interval in minutes (0 = off) — v27 (trailing)
  uint8_t  beta_updates;      // opt-in to test/beta firmware on the OTA check + install (bool) — v28 (trailing)
  uint8_t  boot_advert;       // one-shot flood self-advert ~6s after boot (bool, 0=off) — v30 (trailing) — #76
+  uint8_t  compact_chat;      // IRC-style dense chat rows instead of bubbles (bool, 0=off) — v31 (trailing)
+  uint32_t clock_floor;       // highest epoch this device handed out (ClockFloorRTC persistence) — v32 (trailing)
+  uint8_t  rx_queue;          // buffered LoRa receive: drain task + packet ring (bool, 0=off, experimental) — v33 (trailing)
 };

 static TouchCfg s_cfg;
@@ -170,6 +173,9 @@ static void cfgSetDefaults(TouchCfg& c) {
  c.local_adv_min     = 0;      // OFF: no periodic zero-hop self-advert
  c.beta_updates      = 0;      // OFF: stable update channel (opt-in to beta/test firmware)
  c.boot_advert       = 0;      // OFF: no automatic advert on boot — opt-in (#76)
+  c.compact_chat      = 0;      // OFF: bubble chat layout (opt-in IRC-style dense rows)
+  c.clock_floor       = 0;      // no persisted send-timestamp floor yet
+  c.rx_queue          = 1;      // ON: buffered receive (test-channel default; opt-out toggle in Radio & Mesh)
  c.sleep_idle        = 0;      // default: idle light-sleep OFF
  { const char* d = "ertui"; for (int i = 0; i < 5; i++) c.nav_keys[i] = (uint8_t)d[i]; }  // default tab hotkeys E/R/T/U/I
  c.map_zoom_buttons  = 0;      // default: map zoom = slider
@@ -250,6 +256,9 @@ static void cfgLoadOrMigrate() {
        if (s_cfg.ver < 28) s_cfg.beta_updates = 0;
        if (s_cfg.ver < 29 && s_cfg.ui_scale == 0) s_cfg.ui_scale = 1;   // bump old 100% default -> Large (150%)
        if (s_cfg.ver < 30) s_cfg.boot_advert = 0;   // #76 new trailing field: advert-on-boot off by default
+        if (s_cfg.ver < 31) s_cfg.compact_chat = 0;  // new trailing field: compact chat rows off by default
+        if (s_cfg.ver < 32) s_cfg.clock_floor = 0;   // new trailing field: no send-timestamp floor persisted yet (#89)
+        if (s_cfg.ver < 33) s_cfg.rx_queue = 1;      // buffered LoRa receive ON for the test channel (opt-out toggle in Radio & Mesh)
        s_cfg.ver = TOUCH_CFG_VER;
        s_cfg.magic = TOUCH_CFG_MAGIC;
        cfgFlush();                // rewrite with new fields defaulted-in
@@ -991,6 +1000,39 @@ bool touchPrefsSetBootAdvert(bool on) {
  return cfgFlush();
 }

+bool touchPrefsGetRxQueue() {
+  if (!s_begun) touchPrefsBegin();
+  return s_cfg.rx_queue != 0;
+}
+bool touchPrefsSetRxQueue(bool on) {
+  if (!s_begun) touchPrefsBegin();
+  s_cfg.rx_queue = on ? 1 : 0;
+  return cfgFlush();
+}
+
+bool touchPrefsGetCompactChat() {
+  if (!s_begun) touchPrefsBegin();
+  return s_cfg.compact_chat != 0;
+}
+bool touchPrefsSetCompactChat(bool on) {
+  if (!s_begun) touchPrefsBegin();
+  s_cfg.compact_chat = on ? 1 : 0;
+  return cfgFlush();
+}
+
+// Monotonic send-timestamp floor (ClockFloorRTC, issue #89). Written rate-capped
+// from UITask::loop + on shutdown; only ever grows between resets.
+uint32_t touchPrefsGetClockFloor() {
+  if (!s_begun) touchPrefsBegin();
+  return s_cfg.clock_floor;
+}
+bool touchPrefsSetClockFloor(uint32_t epoch) {
+  if (!s_begun) touchPrefsBegin();
+  if (epoch <= s_cfg.clock_floor) return true;   // never regress the persisted floor
+  s_cfg.clock_floor = epoch;
+  return cfgFlush();
+}
+
 // Periodic self-advert intervals (0 = off). Validation mirrors MeshCore: flood in hours (cap 168);
 // local zero-hop in minutes, 0 or 60-240 (MeshCore's MIN_LOCAL_ADVERT_INTERVAL is 60).
 uint16_t touchPrefsGetFloodAdvHrs() {
@@ -1652,6 +1694,71 @@ void touchPrefsSetChannelMute(const char* name, uint8_t flags) {
  s_begun = s_prefs.begin(TOUCH_NS, true);
 }

+// ---- Per-channel avatar emoji (chat-list avatar override) ----
+// Same keyed-blob pattern as the mute table above: 32-byte name + 16-byte UTF-8
+// glyph (16 covers ZWJ sequences). No entry = auto (the two-letter avatar).
+// 24 entries x 48 B = 1152 B, safely under the SdNvsPrefs 2048-byte blob cap.
+static const int   CHE_NAME  = TOUCH_CHMUTE_NAME;
+static const int   CHE_GLYPH = 16;
+static const int   CHE_ENTRY = CHE_NAME + CHE_GLYPH;
+static const int   CHE_MAX   = 24;
+static const char* KEY_CHE   = "chemoji";
+static uint8_t     s_che[CHE_MAX * CHE_ENTRY];
+static int         s_che_n = -1;   // -1 = not loaded yet
+static void cheLoad() {
+  if (s_che_n >= 0) return;
+  s_che_n = 0;
+  if (!s_begun) touchPrefsBegin();
+  if (!s_prefs.isKey(KEY_CHE)) return;
+  size_t n = s_prefs.getBytes(KEY_CHE, s_che, sizeof(s_che));
+  if (n == 0 || n > sizeof(s_che)) { s_che_n = 0; return; }
+  s_che_n = (int)(n / CHE_ENTRY);
+}
+static int cheFind(const char* name) {
+  cheLoad();
+  for (int i = 0; i < s_che_n; ++i)
+    if (strncmp((const char*)&s_che[i * CHE_ENTRY], name, CHE_NAME) == 0) return i;
+  return -1;
+}
+bool touchPrefsGetChannelEmoji(const char* name, char* out, size_t cap) {
+  if (out && cap) out[0] = '\0';
+  if (!name || !name[0] || !out || cap == 0) return false;
+  int i = cheFind(name);
+  if (i < 0) return false;
+  const char* g = (const char*)&s_che[i * CHE_ENTRY + CHE_NAME];
+  size_t n = strnlen(g, CHE_GLYPH);
+  if (n >= cap) n = cap - 1;
+  memcpy(out, g, n);
+  out[n] = '\0';
+  return out[0] != '\0';
+}
+void touchPrefsSetChannelEmoji(const char* name, const char* utf8) {
+  if (!name || !name[0]) return;
+  cheLoad();
+  int i = cheFind(name);
+  if (!utf8 || !utf8[0]) {                       // clear -> back to auto letters
+    if (i < 0) return;
+    for (int j = i; j + 1 < s_che_n; ++j) memcpy(&s_che[j * CHE_ENTRY], &s_che[(j + 1) * CHE_ENTRY], CHE_ENTRY);
+    --s_che_n;
+  } else {
+    if (i < 0) {
+      if (s_che_n >= CHE_MAX) return;            // cap reached
+      i = s_che_n++;
+      memset(&s_che[i * CHE_ENTRY], 0, CHE_ENTRY);
+      strncpy((char*)&s_che[i * CHE_ENTRY], name, CHE_NAME - 1);
+    }
+    memset(&s_che[i * CHE_ENTRY + CHE_NAME], 0, CHE_GLYPH);
+    strncpy((char*)&s_che[i * CHE_ENTRY + CHE_NAME], utf8, CHE_GLYPH - 1);
+  }
+  s_prefs.end();
+  if (s_prefs.begin(TOUCH_NS, false)) {
+    if (s_che_n == 0) s_prefs.remove(KEY_CHE);
+    else              s_prefs.putBytes(KEY_CHE, s_che, (size_t)(s_che_n * CHE_ENTRY));
+    s_prefs.end();
+  }
+  s_begun = s_prefs.begin(TOUCH_NS, true);
+}
+
 // Remembered repeater admin passwords --------------------------------------
 //
 // Layout: single NVS blob "rpw" of up to TOUCH_REPEATER_PW_MAX records,
@@ -153,6 +153,19 @@ bool    touchPrefsSetMsgFlash(bool on);
 bool    touchPrefsGetBootAdvert();
 bool    touchPrefsSetBootAdvert(bool on);

+/* Compact chat (IRC-style): one dense "HH:MM name: text" row per message instead of
+ * bubbles, so far more history fits on screen. Opt-in, default off (bubbles). */
+bool    touchPrefsGetCompactChat();
+bool    touchPrefsSetCompactChat(bool on);
+
+/* Buffered LoRa receive (experimental): a high-priority drain task lifts each packet
+ * out of the radio within ~1 ms so UI-thread stalls can't overwrite unread packets
+ * (the missed-messages class). Opt-in, default off = stock receive path. */
+bool    touchPrefsGetRxQueue();
+bool    touchPrefsSetRxQueue(bool on);
+uint32_t touchPrefsGetClockFloor();               // monotonic send-timestamp floor (#89)
+bool    touchPrefsSetClockFloor(uint32_t epoch);  // only ever grows; no-op below current
+
 /* Periodic self-advert intervals (the standard MeshCore flood/local advert, on a timer). 0 = off.
 * Flood in hours; local zero-hop in minutes (0 or 60-240). Scheduled in UITask::loop via sendAdvert. */
 uint16_t touchPrefsGetFloodAdvHrs();
@@ -376,6 +389,8 @@ constexpr uint8_t TOUCH_CHMUTE_MSG = 0x1;
 constexpr uint8_t TOUCH_CHMUTE_MEN = 0x2;
 uint8_t touchPrefsGetChannelMute(const char* name);
 void    touchPrefsSetChannelMute(const char* name, uint8_t flags);
+bool    touchPrefsGetChannelEmoji(const char* name, char* out, size_t cap);  // chat-list avatar override; false/empty = auto letters
+void    touchPrefsSetChannelEmoji(const char* name, const char* utf8);       // empty/null clears back to auto

 /** Generic NVS blob (key/value). Used to persist the discovered-nodes list so
 *  it survives a reboot. getBlob returns the byte count copied (0 if absent). */
@@ -2,12 +2,14 @@
 #include <Arduino.h>
 #include <mbedtls/sha1.h>
 #include <string.h>
+#include <lwip/sockets.h>

 #ifndef WS_FRAME_DEBUG
 #define WS_FRAME_DEBUG 0
 #endif

 #define TCP_WRITE_TIMEOUT_MS   120
+#define WS_WEDGED_DROP_MS      10000
 #define WS_MAGIC               "258EAFA5-E914-47DA-95CA-C5AB0DC85B11"

 // Browser opens http://device:8765 — short info page (plain WebSocket endpoint).
@@ -47,15 +49,32 @@ static void base64Encode20(const uint8_t* in, char* out) {
  *out = '\0';
 }

+// True when lwIP can accept bytes for this socket right now — see the identical probe
+// in TCPCompanionServer.cpp. Without it, WiFiClient::write() against a peer that
+// stopped ACKing (half-open socket) blocks in 1 s select() waits on the loop thread.
+static bool socketWritableNow(WiFiClient& client) {
+  int fd = client.fd();
+  if (fd < 0) return false;
+  fd_set wset;
+  FD_ZERO(&wset);
+  FD_SET(fd, &wset);
+  struct timeval tv;
+  tv.tv_sec = 0;
+  tv.tv_usec = 0;
+  return select(fd + 1, NULL, &wset, NULL, &tv) > 0 && FD_ISSET(fd, &wset);
+}
+
 static bool writeAllBytes(WiFiClient& client, const uint8_t* buf, size_t len, uint32_t timeout_ms) {
  size_t sent = 0;
  uint32_t start = millis();
  while (sent < len) {
    if (!client.connected()) return false;
-    size_t n = client.write(buf + sent, len - sent);
-    if (n > 0) {
-      sent += n;
-      continue;
+    if (socketWritableNow(client)) {
+      size_t n = client.write(buf + sent, len - sent);
+      if (n > 0) {
+        sent += n;
+        continue;
+      }
    }
    if (millis() - start >= timeout_ms) return false;
    delay(1);
@@ -72,6 +91,7 @@ WebSocketCompanionServer::WebSocketCompanionServer()
    _clients[i].handshake_len = 0;
    _clients[i].ws_state = WS_STATE_HEADER_0;
    _clients[i].comp_state = COMP_STATE_IDLE;
+    _clients[i].stall_ms = 0;
  }
 }

@@ -142,6 +162,7 @@ void WebSocketCompanionServer::acceptNewClients() {
    _clients[slot].handshake_len = 0;
    _clients[slot].ws_state = WS_STATE_HEADER_0;
    _clients[slot].comp_state = COMP_STATE_IDLE;
+    _clients[slot].stall_ms = 0;
  }
 }

@@ -355,8 +376,18 @@ size_t WebSocketCompanionServer::writeToClient(int client_index, const uint8_t s
 #if WS_FRAME_DEBUG
    Serial.printf("WS frame client=%d code=%u len=%u written=0\n", client_index, (unsigned)(len ? src[0] : 0), (unsigned)len);
 #endif
+    // Same wedged-peer reaper as the TCP server: a client that stays unwritable for
+    // WS_WEDGED_DROP_MS straight is half-open (browser tab gone, phone asleep) and
+    // would otherwise eat the write-timeout budget on every pushed frame forever.
+    WSClientState* c = &_clients[client_index];
+    if (c->stall_ms == 0) {
+      c->stall_ms = millis() | 1;
+    } else if (millis() - c->stall_ms >= WS_WEDGED_DROP_MS) {
+      disconnectClient(client_index);
+    }
    return 0;
  }
+  _clients[client_index].stall_ms = 0;
 #if WS_FRAME_DEBUG
  Serial.printf("WS frame client=%d code=%u len=%u written=%u\n", client_index, (unsigned)(len ? src[0] : 0), (unsigned)len, (unsigned)len);
 #endif
@@ -396,5 +427,6 @@ void WebSocketCompanionServer::disconnectClient(int client_index) {
  if (client_index >= 0 && client_index < WS_COMPANION_MAX_CLIENTS && _clients[client_index].in_use) {
    _clients[client_index].client.stop();
    _clients[client_index].in_use = false;
+    _clients[client_index].stall_ms = 0;
  }
 }
@@ -35,6 +35,7 @@ struct WSClientState {
  uint16_t comp_frame_len;
  uint16_t comp_rx_len;
  uint8_t comp_rx_buf[MAX_FRAME_SIZE];
+  uint32_t stall_ms;   // start of a continuous write-failure run; 0 = healthy
 };

 // WebSocket server for companion protocol. Same logical protocol as TCP; transport is RFC 6455 (plain WS).
@@ -573,9 +573,21 @@ void setup() {
 void loop() {
  // Run UI first every iteration so splash can dismiss at 3s even if mesh/serial blocks later (was stuck on version screen when the_mesh.loop() ran before ui_task.loop()).
 #ifdef DISPLAY_CLASS
-  ui_task.loop();
+  // ---- beta_31 field-freeze tracer (see UITask.cpp): time each loop section ----
+  extern void stallLog(const char* tag, uint32_t dur_ms);
+  extern const char* g_ui_stall_tag;
+  extern uint16_t    g_ui_stall_max;
+#define STALL_SCOPE(tag, call) { uint32_t _st0 = millis(); call; uint32_t _sdt = millis() - _st0; if (_sdt >= 200) stallLog(tag, _sdt); }
+  { uint32_t _ui0 = millis();
+    ui_task.loop();
+    uint32_t _uidt = millis() - _ui0;
+    if (_uidt >= 200) stallLog((g_ui_stall_max >= 150 && g_ui_stall_tag[0]) ? g_ui_stall_tag : "ui:other", _uidt);
+  }
 #endif
 #ifdef MULTI_TRANSPORT_COMPANION
+#ifdef DISPLAY_CLASS
+  uint32_t _wf0 = millis();   // beta_31 tracer: time the whole Wi-Fi state machine + SNTP span
+#endif
  static bool wifi_started = false;
  static uint32_t last_wifi_retry_ms = 0;
  static const uint32_t WIFI_RETRY_INTERVAL_MS = 10000;
@@ -700,14 +712,22 @@ void loop() {
      if (sntp_kicked && !sntp_pushed) sntp_kicked = false;
    }
  }
+#ifdef DISPLAY_CLASS
+  { uint32_t _wfdt = millis() - _wf0; if (_wfdt >= 200) stallLog("wifi-sm", _wfdt); }
+#endif
  // Defer TCP and WebSocket until after splash dismisses so the_mesh.loop() never blocks on accept() before ui_task.loop() runs.
  static const uint32_t TCP_DEFER_MS = 5000;   // 5 s: don't start TCP/WS until version screen has dismissed
  /* Only start TCP / WS when WiFi was actually brought up. In BLE-only mode
   * (no saved creds) the lwIP stack is never initialized — calling
   * WiFiServer::begin() crashes with a tcpip_adapter assert. */
  if (millis() > TCP_DEFER_MS && wifi_started) {
+#ifdef DISPLAY_CLASS
+    STALL_SCOPE("tcp-server", serial_interface.startTcpServer(WiFi.status() == WL_CONNECTED));
+    STALL_SCOPE("ws-tick",    serial_interface.tickWebSocketHandshake());
+#else
    serial_interface.startTcpServer(WiFi.status() == WL_CONNECTED);
    serial_interface.tickWebSocketHandshake();
+#endif
  }
 #endif
 #if defined(HAS_TOUCH_UI)
@@ -718,10 +738,18 @@ void loop() {
  // and clears the flag, so the next the_mesh.loop() re-arms RX correctly.
  if (!spectrumOwnsRadio())
 #endif
+#ifdef DISPLAY_CLASS
+  STALL_SCOPE("mesh", the_mesh.loop());
+#else
  the_mesh.loop();
+#endif
 #if defined(ESP32) && defined(MULTI_TRANSPORT_COMPANION)
+#ifdef DISPLAY_CLASS
+  STALL_SCOPE("mqtt", mqtt_bridge.loop());
+#else
  mqtt_bridge.loop();
 #endif
+#endif
 #if defined(GPS_BUF_DEBUG)
  // Bench diagnostic (build with -DGPS_BUF_DEBUG only; absent in releases): peak GPS UART
  // backlog accumulated between sensors.loop() drains. A peak above the old 256-byte default
@@ -738,7 +766,11 @@ void loop() {
    }
  }
 #endif
+#ifdef DISPLAY_CLASS
+  STALL_SCOPE("sensors", sensors.loop());
+#else
  sensors.loop();
+#endif
 #if defined(ESP32)
  // GPS time guard (Ricky Leong's "stuck at 1902"): MicroNMEALocationProvider
  // sets the mesh RTC from a GPS *position* fix even before the date fields are
@@ -795,6 +827,10 @@ void loop() {
  // Idle light-sleep gate: evaluated every loop tick. g_enabled is false by
  // default (Task 1 is inert); Task 2 sets it from the NVS pref and wires
  // the real predicates so the gate can actually pass and arm light sleep.
+#ifdef DISPLAY_CLASS
+  STALL_SCOPE("sleep-gate", touchSleep::loopEnd(millis()));
+#else
  touchSleep::loopEnd(millis());
 #endif
+#endif
 }
@@ -30,6 +30,10 @@ enum class TouchUiScreen : uint8_t { Home = 0, ChatInbox = 1, Contacts = 2, Sett
 class UITask : public AbstractUITask {
 public:
  static const int MAX_UI_MESSAGES = 500;
+  /** Deep ring for devices whose chat history lives on an SD card (T-Deck with a
+   *  card, Tanmatsu SD_MMC): 10x the internal-flash ring. Chosen at begin() into
+   *  _ui_msg_cap; PSRAM cost ~5000 * sizeof(UIMessage) ≈ 1.3 MB (of 8 MB). */
+  static const int MAX_UI_MESSAGES_SD = 5000;
  static const int MAX_UI_THREADS = 48;
  static const int MAX_THREAD_NAME = 32;
  static const int MAX_SENDER_NAME = 24;
@@ -130,6 +134,10 @@ private:
  int _msgcount;
  int _ui_msg_count;
  int _ui_msg_head;
+  /** Runtime ring capacity: MAX_UI_MESSAGES_SD when history lives on an SD card,
+   *  else MAX_UI_MESSAGES. Fixed for the whole boot (chosen before the PSRAM
+   *  alloc in begin()); the loader linearizes files written under another cap. */
+  int _ui_msg_cap = MAX_UI_MESSAGES;
  unsigned long _next_thread_seed;
  UIMessage* _ui_msgs   = nullptr;   // ring of recent messages — PSRAM-allocated in begin()
  UIThread*  _ui_threads = nullptr;  // thread table — PSRAM-allocated in begin()
@@ -315,6 +323,47 @@ public:
    return _ui_threads[_active_thread_idx].mesh_channel_slot;
  }
  int  activeThreadIdx() const { return _active_thread_idx; }
+  /** Any thread's pinned mesh-channel slot (-1 when not a channel / out of range).
+   *  chatDeleteApply prefers this (name-validated) over a pure name scan so
+   *  deleting a channel actually drops its mesh-table entry — otherwise
+   *  refreshThreadsFromMesh() recreates the thread from the surviving channel. */
+  int16_t threadMeshChannelSlot(int idx) const {
+    if (idx < 0 || idx >= MAX_UI_THREADS || !_ui_threads[idx].used || !_ui_threads[idx].channel) return -1;
+    return _ui_threads[idx].mesh_channel_slot;
+  }
+  /** Message-ring capacity this boot (500, or 5000 with SD-backed history). */
+  int  msgCap() const { return _ui_msg_cap; }
+  /** DM thread's full contact pubkey (32 B) — for the chat sheet's "Reset path".
+   *  False for channels, unused slots, or a thread with no pubkey mapping yet. */
+  bool getThreadContactPub(int idx, uint8_t out[32]) const {
+    if (idx < 0 || idx >= MAX_UI_THREADS) return false;
+    if (!_ui_threads[idx].used || _ui_threads[idx].channel) return false;
+    const uint8_t* p = _ui_threads[idx].mesh_contact_pub;
+    uint8_t any = 0;
+    for (int i = 0; i < 32; i++) { out[i] = p[i]; any |= p[i]; }
+    return any != 0;
+  }
+  /** Newest message of a thread (chat-list preview): scans the ring by the
+   *  thread's name + kind and returns the latest by timestamp. False when the
+   *  thread has no messages in the ring. */
+  bool getThreadLastMessage(int idx, char* sender, size_t sender_cap,
+                            char* text, size_t text_cap, bool* outgoing) const {
+    if (idx < 0 || idx >= MAX_UI_THREADS || !_ui_threads[idx].used || !_ui_msgs) return false;
+    const bool ch  = _ui_threads[idx].channel;
+    const char* nm = _ui_threads[idx].name;
+    int best = -1; uint32_t best_ts = 0;
+    for (int i = 0; i < _ui_msg_cap; ++i) {
+      const UIMessage& m = _ui_msgs[i];
+      if (!m.text[0] || m.channel != ch) continue;
+      if (strncmp(m.thread, nm, MAX_THREAD_NAME) != 0) continue;
+      if (best < 0 || m.ts >= best_ts) { best = i; best_ts = m.ts; }   // >= : a later slot wins ts ties (newer in the ring)
+    }
+    if (best < 0) return false;
+    if (sender && sender_cap) { strncpy(sender, _ui_msgs[best].sender, sender_cap - 1); sender[sender_cap - 1] = '\0'; }
+    if (text && text_cap)     { strncpy(text,   _ui_msgs[best].text,   text_cap - 1);   text[text_cap - 1] = '\0'; }
+    if (outgoing) *outgoing = _ui_msgs[best].outgoing;
+    return true;
+  }
  int  threadScroll() const { return _thread_scroll; }
  void setThreadScroll(int v) { _thread_scroll = v; }
  bool hasDisplay() const { return _display != NULL; }
@@ -456,6 +505,7 @@ public:
  void onPingReply(const ContactInfo& contact, const uint8_t* data, size_t len) override;
  void onTelemetryReply(const ContactInfo& contact, const uint8_t* data, size_t len) override;
  void onAdminLoginResult(const ContactInfo& contact, bool success, uint8_t perms) override;
+  void onServerClock(const ContactInfo& contact, uint32_t server_epoch) override;
  void onAdminCommandReply(const ContactInfo& contact, const char* text) override;
  void onThreadsChanged() override;
  void loop() override;
@@ -36,7 +36,16 @@ if [ -f "$BLEDEV_CPP" ] && grep -q 'int rc = ble_gap_read_local_irk(irk);' "$BLE
  echo "[build.sh] patched arduino BLEDevice.cpp (stub renamed ble_gap_read_local_irk)"
 fi

+# Firmware tag shown on About + used by the update check. Derived from git so dev
+# builds are honest ("beta_28-14-gabc123" = 14 commits past beta_28) and a release
+# build on a fresh beta_N tag bakes exactly "beta_N" — no more hand-bumping the
+# old hardcoded CMake define (which left every dev flash claiming the last beta).
+# Passed as a CMake cache var: idf.py reconfigures automatically when it changes.
+WADA_FW_TAG="$(git describe --tags --match 'beta_*' --always 2>/dev/null || echo dev)"
+WADA_FW_DATE="$(date '+%-d %b %Y')"
+
 exec idf.py -B build/tanmatsu \
  -DDEVICE=tanmatsu \
  -DSDKCONFIG_DEFAULTS="sdkconfigs/general;sdkconfigs/tanmatsu;sdkconfigs/wadamesh" \
+  -DWADA_FW_TAG="$WADA_FW_TAG" -DWADA_FW_DATE="$WADA_FW_DATE" \
  -DIDF_TARGET=esp32p4 "$@"
@@ -54,11 +54,19 @@ foreach(_d ${WADA_DEFS})
  idf_build_set_property(COMPILE_OPTIONS "-D${_d}" APPEND)
 endforeach()

-# Firmware version shown on the About page. The Tanmatsu builds outside the S3 release.sh flow (which
-# injects these), so set them here or About shows only a generic "development build" with no version.
-# Quotes are escaped so the compiler sees string literals. TODO: have build.sh pass the real tag/date
-# per release (e.g. from git describe) instead of hardcoding; bump this each beta for now.
-idf_build_set_property(COMPILE_OPTIONS "-DFIRMWARE_RELEASE_TAG=\"beta_25\"" APPEND)
-idf_build_set_property(COMPILE_OPTIONS "-DFIRMWARE_BUILD_DATE=\"1 Jul 2026\"" APPEND)
+# Firmware version shown on the About page + parsed by the update check. build.sh passes
+# WADA_FW_TAG/-DATE from git describe + date, so dev builds show the real state
+# ("beta_28-14-gabc123") and a release build on the beta_N tag bakes exactly "beta_N" —
+# the old hardcoded define left every dev flash claiming the last hand-bumped beta.
+# firmwareReleaseN() parses the leading "beta_%d", so the -dev suffix keeps the update
+# check on the right baseline. Quotes escaped so the compiler sees string literals.
+if(NOT WADA_FW_TAG)
+  set(WADA_FW_TAG "dev")
+endif()
+if(NOT WADA_FW_DATE)
+  set(WADA_FW_DATE "")
+endif()
+idf_build_set_property(COMPILE_OPTIONS "-DFIRMWARE_RELEASE_TAG=\"${WADA_FW_TAG}\"" APPEND)
+idf_build_set_property(COMPILE_OPTIONS "-DFIRMWARE_BUILD_DATE=\"${WADA_FW_DATE}\"" APPEND)
 # (the adcAttachPin compat shim is force-included per-component in meshcore + wadamesh_app —
 #  NOT globally, which would feed the C++ header to FreeRTOS's .S assembly files and break them.)
@@ -20,7 +20,7 @@ HeltecV4Board board;
 WRAPPER_CLASS radio_driver(radio, board);

 ESP32RTCClock fallback_clock;
-AutoDiscoverRTCClock rtc_clock(fallback_clock);
+ClockFloorRTC        rtc_clock(fallback_clock);

 #if ENV_INCLUDE_GPS
  #include <helpers/sensors/MicroNMEALocationProvider.h>
@@ -10,6 +10,7 @@ extern "C" void set_boot_phase(int phase);
 #include <HeltecV4Board.h>
 #include <helpers/radiolib/CustomSX1262Wrapper.h>
 #include <helpers/AutoDiscoverRTCClock.h>
+#include "../../src/helpers/ClockFloorRTC.h"   // monotonic send-timestamp floor (issue #89)
 #include <helpers/SensorManager.h>
 #include <helpers/sensors/EnvironmentSensorManager.h>
 #ifdef DISPLAY_CLASS
@@ -24,7 +25,7 @@ extern "C" void set_boot_phase(int phase);
 extern HeltecV4Board board;
 extern WRAPPER_CLASS radio_driver;
 extern RADIO_CLASS radio;   // raw SX1262 — driven directly by the Spectrum analyzer sweep
-extern AutoDiscoverRTCClock rtc_clock;
+extern ClockFloorRTC rtc_clock;
 extern EnvironmentSensorManager sensors;

 #ifdef DISPLAY_CLASS
@@ -21,7 +21,7 @@ SPIClass* tdeckSharedSPI() {
 }

 ESP32RTCClock fallback_clock;
-AutoDiscoverRTCClock rtc_clock(fallback_clock);
+ClockFloorRTC        rtc_clock(fallback_clock);
 MicroNMEALocationProvider gps(Serial1, &rtc_clock);
 EnvironmentSensorManager sensors(gps);

@@ -6,6 +6,7 @@
 #include <helpers/radiolib/CustomSX1262Wrapper.h>
 #include <TDeckBoard.h>
 #include <helpers/AutoDiscoverRTCClock.h>
+#include "../../src/helpers/ClockFloorRTC.h"   // monotonic send-timestamp floor (issue #89)
 #include <helpers/SensorManager.h>
 #ifdef DISPLAY_CLASS
  #include <helpers/ui/ST7789LCDDisplay.h>
@@ -17,7 +18,7 @@
 extern TDeckBoard board;
 extern WRAPPER_CLASS radio_driver;
 extern RADIO_CLASS radio;   // raw SX1262 — driven directly by the Spectrum analyzer sweep
-extern AutoDiscoverRTCClock rtc_clock;
+extern ClockFloorRTC rtc_clock;
 extern EnvironmentSensorManager sensors;

 #ifdef DISPLAY_CLASS
@@ -36,6 +36,17 @@ public:
  void idle();                                             // → standby (RadioLibWrapper::idle)
  uint32_t getPacketsRecvErrors() const { return _n_recv_errors; }

+  // Buffered-receive API parity with RadioLibWrapper — no-op stubs. This bridge
+  // drains the remote radio its own way; the S3 drain-task feature does not map
+  // onto it, but shared UI/mesh code calls these unguarded.
+  void     rxQueueEnable(bool) {}
+  bool     rxQueueEnabled() const { return false; }
+  void     rxQueueSuspend(bool) {}
+  void     radioAcquire() {}
+  void     radioRelease() {}
+  uint32_t getRxEvents() const { return _n_recv + _n_recv_errors; }
+  uint32_t getRxQueueDrops() const { return 0; }
+
  // --- mesh::Radio contract (Dispatcher.h) ---
  void     begin() override {}                             // lifecycle hook; remote radio is RX-ready after init()
  int      recvRaw(uint8_t* bytes, int sz) override;       // drain one RX packet, 0 if none
@@ -10,7 +10,7 @@ DISPLAY_CLASS     display;          // global LVGL flush target + boot/shutdown
 SensorManager     sensors;          // base (no telemetry yet); EnvironmentSensorManager later

 ESP32RTCClock        fallback_clock;
-AutoDiscoverRTCClock rtc_clock(fallback_clock);
+ClockFloorRTC        rtc_clock(fallback_clock);

 bool radio_init() {
  fallback_clock.begin();
@@ -8,10 +8,11 @@
 #include <TanmatsuBoard.h>
 #include "TanmatsuLoraRadio.h"
 #include <helpers/AutoDiscoverRTCClock.h>
+#include "../../src/helpers/ClockFloorRTC.h"   // monotonic send-timestamp floor (issue #89)

 extern TanmatsuBoard        board;
 extern TanmatsuLoraRadio    radio_driver;
-extern AutoDiscoverRTCClock rtc_clock;
+extern ClockFloorRTC rtc_clock;

 #include <TanmatsuDisplay.h>
 #include <helpers/SensorManager.h>
Author	SHA1	Message	Date
Kaj SchittecatandClaude Fable 5	4e1ac2ca6b	touch: beta_34 — buffered LoRa receive ON by default (test channel) + core pin core-v1.16.5 Consumes the new core (buffered receive drain task + RX counters, #13 stock payload layout, GPS-date guard). Fork side: - TouchPrefs v33 rx_queue, DEFAULT ON for the test channel (fresh installs + a one-time migrate for upgraders); opt-out toggle 'Buffered receive (experimental)' in Radio & Mesh, applies live. - About live tier shows LoRa RX heard/read/err/late-lost/qdrop, the field evidence for the missed-messages fix. - Spectrum parks/resumes the drain task around raw radio use; MyMesh setParams sequences hold the radio mutex. - TanmatsuLoraRadio: no-op API stubs (P4 keeps its own RX path). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-06 11:15:52 +02:00
Kaj Schittecat	5d9a184314	chore: refresh Mesh America catalog for beta_33	2026-07-05 23:50:32 +02:00
Kaj SchittecatandClaude Fable 5	8e17b1b071	touch: beta_33 — async MQTT connect (freeze fix) + About sketch-size cache + favorites-full toast - MqttBridge: reconnect() (blocking DNS + TCP + CONNACK, 2-10 s vs an unreachable broker, every 15 s) now runs on a one-shot core-0 task; _connecting hands the client between threads. Broker socket writes get the same zero-timeout writability probe as the TCP/WS companion servers, so a wedged broker fails a publish instead of stalling loop(). - About: ESP.getSketchSize()/getFreeSketchSpace() esp_image_verify-walk the whole ~3 MB image (~190 ms each); the 1 Hz refresh cost ~390 ms/s and flooded the stall ring (the ui:sbar entries field testers photographed). Computed once and cached. - Favorites: adding past the 16-cap now toasts 'Favorites full (max 16)' instead of the wrong 'Removed from favorites'. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-05 23:34:22 +02:00
Kaj SchittecatandClaude Fable 5	b58cecab5c	touch: beta_32 — non-blocking TCP/WS companion writes (Wi-Fi freeze fix) + chunked history flush + stall diagnostics Root cause of the beta_31 periodic 1-2s freezes with Wi-Fi on: every received mesh packet pushes an RX-log frame to all connected TCP/WS companion clients from the loop thread, and writeAllBytes called WiFiClient::write() unguarded — against a stale peer (phone asleep, half-open socket) that blocks in the framework's 1s select() retries. The 120ms app timeout only bounded attempts, not the first call. - TCP+WS servers: probe writability (zero-timeout select on the client fd) before every write; lwIP reports writable only with ~2.8KB free, a whole frame is ~180B, so probed writes complete instantly. - Reap clients whose writes fail continuously for 10s (half-open sockets previously stayed "connected" forever, eating the write budget on every pushed frame). - Chat-history ring: chunked writer + wider flush spacing (same treatment saveContacts got in beta_30). - Stall tracer: 16-entry ring of >=0.2s loop stalls, shown in About. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-05 22:55:42 +02:00
Kaj Schittecat	816045bb6b	chore: refresh Mesh America catalog for beta_31	2026-07-05 21:13:27 +02:00
Kaj SchittecatandClaude Fable 5	11939a744e	touch: beta_31 — WhatsApp-style chats tab (avatars + previews) with per-channel custom icons - Default chat list: 56px rows with a round initials avatar in the thread's FNV-hue signature colour, last-message preview (getThreadLastMessage ring accessor), time top-right, unread pill + @ below; compact chat mode keeps the dense 34px contact-style rows (layout mode mixed into the rebuild sig) - Per-channel avatar emoji: 'Chat icon' in the thread-settings sheet (tap = emoji sheet in new pick mode, long-press = reset to letters); persisted in a chmute-style keyed blob (touchPrefsGet/SetChannelEmoji, 24 x 48B) - Fix: name/preview overlap (LONG_DOT labels need fixed one-line heights) - Thread-sheet grid gap 6->4 so the 7th channel cell keeps one screen on T-Deck Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-05 21:07:42 +02:00
Kaj SchittecatandClaude Fable 5	f47d71a05b	touch: beta_30 — big-mesh contacts perf (buffered save, in-place age labels, coalesced rebuilds) + live Spectrum - DataStore::saveContacts packs byte-identical 152B records into ~5KB chunk writes (was ~12 tiny FS writes per contact: 2.6-3.0s at ~570 contacts on the loop thread — the #82 sluggishness); falls back to per-field writes on alloc failure - Contacts 60s age tick updates the Heard labels in place (was a ~1.3s full teardown+rebuild); advert-driven rebuilds coalesced to one per 2.5s - Spectrum: rolling waterfall row + live trace every quarter sweep (~250ms), 8-bin/8ms sweep chunks (~20% faster full sweep); trace Y range now tracks the live min/max — instant expand, 3dB/sweep contract, 30dB minimum span Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-05 13:08:40 +02:00
Kaj SchittecatandClaude Fable 5	8eb63a7edd	touch: beta_29 — clock floor for room-server replay guards, BLE repeats-heard, deep SD history, one-screen popups - ClockFloorRTC on all boards: persisted monotonic send-timestamp floor (touchPrefs v32), garbage-set rejection, trusted-backstep cap; Join no-reply watchdog + server clock skew warning from the LOGIN_OK timestamp prefix (issue #89 follow-up) - BLE repeats-heard: own-echo RX-log frames pass to BLE one-shot; the #46/#54 congestion skip stays for everything else (issue #94) - Mirror app-sent channel messages on-device (was Tanmatsu-only from birth) - Chat delete: persist the ring purge; mesh-channel drop prefers the pinned slot - Deep SD history (5000-msg ring) + date separators; chat-list rows restyled compact - Popup unification: popupClose() + k_popup_registry drive dismiss/count/swipe-block - Thread/channel sheet as one-screen 2-col grid (contact-sheet layout) - Keypad nav: strip LVGL SCROLL_ON_FOCUS from collected widgets (About-page jump); update dot no longer focusable; verchk waits for an IP + retries with backoff - Tanmatsu: FIRMWARE_RELEASE_TAG from git describe (drop the hand-bumped hardcode) Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-05 10:07:16 +02:00
Kaj SchittecatandClaude Opus 4.8	5623237951	site: dismissible donate banner -> support the MeshCore founders Sticky top banner asking would-be donors to help the MeshCore founders instead — links to the blog post (Learn more) and the givealittle donation page (Donate). Dismissible (x + localStorage), and it shifts the corner FAB rails down while shown so they don't collide with the close button. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-04 15:22:37 +02:00
Kaj SchittecatandClaude Fable 5	b90b8bac14	touch: beta_28 — room-server session fix (#89 ), ST7789 panel sleep, wyvern feedback batch - Rooms: re-enable the keep-alive pinger (checkConnections), arm a 128s keep-alive on LOGIN_OK (servers send 0), blank-relogin self-heal while a room chat is open, 'Log in again' in the room sheet, read-only warning. Root-caused against simple_room_server: 3 unACKed pushes freeze a client until the server hears from it — and we never pinged (issue #89). - Burn-in: ST7789 SLPIN/SLPOUT on screen-off (backlight-off alone kept the panel driving the static image), lit-lock dim guard on all boards, 10s notify-wake re-dim, lock clock pixel drift. - wyvern.red batch: scroll-keys map zoom, backspace exits empty composer, Reset path in the chat sheet, compact chat toggle (TouchPrefs v31), clearer delivery glyphs + tap-to-resend on failed sends. - OTA: hide Install-update when the running image's physical address falls outside the esp_ota running slot (mixed/legacy tables; beta_21 coredump). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-04 13:40:02 +02:00
Kaj Schittecat	3585b3a1e0	chore: refresh Mesh America catalog for beta_27	2026-07-04 08:45:41 +02:00
Kaj SchittecatandClaude Fable 5	a4d3715529	release-notes: beta_27 stable rollup (beta_26 + beta_27 since stable beta_25) Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-04 08:45:29 +02:00