New: stable/test update channels with an opt-in "Get test builds (beta)" toggle on
OTA devices (switches both the update check and what you install); experimental
opt-in MQTT bridge (consent-gated, payload encryption, direct messages off by
default); Portugal (Narrow) region preset (#74); saved-contacts counter in the
Contacts overflow menu (#72).
Fixed: the signal probe is now strictly zero-hop so a repeater can't re-flood it;
the contact list sorts before capping so the most relevant contacts show, with a
"+N more — search to narrow" footer (#73); the blocked-users list opened from
Contacts shows the two-line title bar with a back button; the Contacts overflow
popup fits the screen again.
Also lands the two-channel release tooling (scripts/release.sh stable/beta modes +
gen-flasher-meta channel arg), the docs site, and the MQTT reference decryptor.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Heltec V4 Expansion Kit local-sensor UI, board-gated behind HAS_EXPANSION_KIT
(V4 touch env only — T-Deck/Tanmatsu unaffected): a Sensors bottom tab
(atmosphere / GPS / battery + history charts), a Home env summary widget, an
Expansion Kit card in Device settings, and a Local Sensors detail page. Reads
on-board MeshCore sensors (BME280, SHT4x, battery, GPS, buzzer) via the standard
sensor/telemetry API — no new hardware drivers.
Mesh console: enable the existing Terminal on the V4 (HAS_TOUCH_UI), renamed
"Mesh console", with wifi/tcp/ble on-off + ota status quick commands. The
SD-backed file-manager pieces stay T-Deck-only (V4/Tanmatsu get a no-op path).
Tab indices are conditional so non-Expansion boards keep 5 tabs (Settings=4) and
the V4 gets 6 (Sensors=4, Settings=5). The PR's GPS-nav/waypoint and weather
pressure-alarm bundles were intentionally left out.
Ported from PR #29 by @samuelcoustet, re-applied against current main.
Co-Authored-By: samuelcoustet <257299705+samuelcoustet@users.noreply.github.com>
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- enableTcp() now calls startTcpServer(false) directly instead of relying
on the main loop — fixes TCP not restarting when wifi_started is false
(BLE-only mode, radio toggled off, or cold re-enable from USB).
- Add touchHasOtaUpdateSlot() guard to the OTA button creation block so
the update affordances stay hidden under Launcher (single app slot),
where ota url would fail silently.
- Fix toggleTcpCb alert race: snapshot isTcpEnabled() before the toggle
so the alert text reflects the transition, not a post-action re-read
that could mismatch during OTA suspension.
- Replace global -w with -Wno-deprecated-declarations -Wno-unused-parameter
in both touch environments to keep third-party lib noise down while
surfacing real regressions in OTA, network, and companion paths.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- BLE: user-settable 6-digit pairing code (Settings -> Bluetooth), MyMesh::setBLEPin.
- Lock wallpaper: pick via the file manager (fast, any folder) + 'Set as wallpaper'
in the image viewer; downscaling JPEG decoder accepts images > 1024 px and keeps
the held buffer small; clear message for progressive JPEGs.
- Map tiles: validate JPEG magic before caching + re-fetch bad cached tiles
(fixes black quadrants).
- Channel @reply: quick-reply now appends at the cursor instead of wiping the
mention.
- Audio: heap pre-flight before i2s_driver_install (fixes the esp_timer NO_MEM
abort when toggling sound under BLE+Wi-Fi memory pressure).
- App drawer: squircle tiles. Log hygiene: CORE_DEBUG_LEVEL 1->0 (mute benign
vfs/Preferences spam off the USB-CDC companion stream).
- Core bump to core-v1.16.4 (drops the 4-byte chat-payload trailer, issue #13).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Core bump: lib_deps -> meshcomod core-v1.16.3 (BLE advertises the node
name not "NimBLE"; GPS won't push a pre-fix ~1902 date).
Tim's quick-wins: Enter-key-sends toggle, 12-hour clock, lock-when-screen-off,
reverse scrollball.
Launcher / map: fix Wi-Fi tiles never downloading under Launcher (the SD-fallback
cache made tilesFsLowSpace() read the unmounted LittleFS as "full"); plot contact
markers before the tile decode so dots aren't ~2s late.
RTC / time: anchored-time guard re-applies UTC when the clock reads garbage
(GPS clobber); blank pre-2020 timestamps so empty channels don't show 1969/1970;
timezone picker (named zones with correct DST) replacing the CET-only base, with
a v2->v3 config migration mapping prior manual offsets onto a Custom zone.
BLE: persist the random pairing PIN (was re-rolled every boot).
Chat: don't auto-jump to latest on a new message when scrolled up; block-by-name
for non-contact room/channel senders (un-blockable room bots).
Power: drop CPU to 80 MHz when the screen is off; enable Wi-Fi modem-sleep only
once associated (enabling it on the unassociated STA broke the setup-wizard scan).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The T-Deck env had SX126X_DIO2_AS_RF_SWITCH=false, so std_init() called
setDio2AsRfSwitch(false). On the T-Deck the SX1262's antenna TX/RX switch is
driven ONLY by DIO2 (no external PA, no TXEN/RXEN pins), so disabling it strands
the +22 dBm PA off the antenna — ~16 dB loss, ~4 mW radiated. That matches the
reported measurement and likely why some sends weren't propagating. Flip to true.
Cross-checked: Meshtastic's T-Deck variant enables it, as does the Heltec V4 here
and every other SX1262 variant in the MeshCore lib — the T-Deck (copied from
upstream MeshCore's identically-buggy lilygo_tdeck variant) was the lone outlier.
LORA_TX_POWER=22, CURRENT_LIMIT=140 and the 1.8 V TCXO were already correct.
Needs an on-air re-measure (no RF meter here); the reporter offered to test.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Picks up the ESP32Board.h fix that seeds the time floor after any reset (not just
power-on), so the touch firmware no longer shows bogus 1970 timestamps after a
panic/OTA reboot until Wi-Fi/GPS sets the clock.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
wadamesh now builds its MeshCore core from the ALLFATHER-BV/meshcomod monorepo
(the same repo as the non-touch firmware) via a lean, source-only core-* tag,
instead of the separate meshcomod-core fork. The 8 touch-app files this repo
vendors are excluded from the lib with -DMC_VENDORED_TOUCH_APP. Build is
byte-identical (Heltec flash 2625757, unchanged). One core, one repo.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Adds the portable merge-bin.py post-script (app-bin -> out/ + a 'mergebin' custom
target) and enables it in both touch envs. Each board now produces firmware.bin
(app/OTA slot) and firmware-merged.bin (full install @ 0x0) — the two artifacts a
release ships. Verified: V4 merged 2.66 MB, T-Deck merged 2.88 MB.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Signed-off-by: Kaj Schittecat <kaj@schittecat.com>
The earlier rename/minimize edits matched only the V4 env's formatting and
silently skipped the T-Deck env, leaving it on MeshCore.git#v1.16.0-wada.0 (old
name, pre-minimize tag whose fork still carried the 26 relocated files — a
duplicate-symbol hazard). Both envs now pin meshcomod-core@v1.16.0-wada.1;
T-Deck clean-rebuilds green + size-identical against it.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Signed-off-by: Kaj Schittecat <kaj@schittecat.com>
The core fork was renamed to ALLFATHER-BV/meshcomod-core to make its lineage
explicit — it carries meshcomod's full core (protocol superset + Wi-Fi/BLE/UI
hooks), packaged as a library. Both envs now pin meshcomod-core @ v1.16.0-wada.1.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Signed-off-by: Kaj Schittecat <kaj@schittecat.com>
Take ownership of the 26 files moved out of the core during the fork-minimize:
touch HW drivers (helpers/input/*), touch prefs/SD helpers + companion transport
servers + HTTP-OTA helpers (helpers/esp32/*, helpers/*Ota*.h), LVGL PSRAM
allocator, and touch diag. Three transport headers switched to lib-style
<helpers/...> includes for the new layout. platformio.ini builds them
(helpers/** filters + -I src) and pins MeshCore @ v1.16.0-wada.1 (the slimmed
fork). Both boards build green + size-identical from the published tag.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Signed-off-by: Kaj Schittecat <kaj@schittecat.com>
Second board. Flattened env LilyGo_TDeck_companion_radio_touch (GT911 touch +
matrix keyboard + trackball, ST7789 via Adafruit, sensors off except GPS),
building green against MeshCore@v1.16.0-wada.0. Output byte-identical to the
in-tree meshcomod T-Deck build (delta = build-path strings).
Both touch boards now build from the published fork via lib_deps.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Signed-off-by: Kaj Schittecat <kaj@schittecat.com>
First board lands. wadamesh builds the LVGL touch firmware as its own project,
consuming the MeshCore core via lib_deps @ git tag (ALLFATHER-BV/MeshCore
#v1.16.0-wada.0) — no vendored core in this repo. Output is byte-identical to the
in-tree meshcomod build (delta = embedded build-path strings only).
Contents: companion_radio app (MyMesh/main/DataStore), ui-touch LVGL UI,
variants/heltec_v4 board glue, boards/heltec_v4.json, lv_conf, the bundled
ed25519 lib, AsyncElegantOTA, partition table, and a flattened platformio.ini
for env heltec_v4_tft_companion_radio_usb_tcp_touch.
MeshCore-derived files (app glue) remain MIT; ui-touch is GPL — see NOTICE.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Signed-off-by: Kaj Schittecat <kaj@schittecat.com>
