Wessel
cb28c38828
P0.04 is a digital power-enable pin for the NTC/LUX sensors, not an ADC input. The old code was calling analogRead() on a floating GPIO that happened to read ~mid-rail, coincidentally producing reasonable temperature values. - Rename T1000X_VCC_PIN to T1000X_SENSOR_EN_PIN and drive it HIGH in initVariant() for both T1000-E and T1000-S variants - Read BATTERY_PIN (with ADC_MULTIPLIER) instead, clamped to the 3.0V LDO output (NTC_REF_VCC) for the NTC resistance calculation
Meshtastic Firmware
Overview
This repository contains the official device firmware for Meshtastic, an open-source LoRa mesh networking project designed for long-range, low-power communication without relying on internet or cellular infrastructure. The firmware supports various hardware platforms, including ESP32, nRF52, RP2040/RP2350, and Linux-based devices.
Meshtastic enables text messaging, location sharing, and telemetry over a decentralized mesh network, making it ideal for outdoor adventures, emergency preparedness, and remote operations.
Get Started
- 🔧 Building Instructions – Learn how to compile the firmware from source.
- ⚡ Flashing Instructions – Install or update the firmware on your device.
Join our community and help improve Meshtastic! 🚀
Stats
