Fichiers
MeshCoreTel-firmware/docs/kiss_modem_protocol.md
T

111 lignes
3.9 KiB
Markdown
Brut Annotations Historique

Ce fichier contient des caractères Unicode ambigus.
Ce fichier contient des caractères Unicode qui peuvent être confondus avec d'autres caractères. Si vous pensez que c'est intentionnel, vous pouvez ignorer cet avertissement. Utilisez le bouton Échappe pour les dévoiler.
# MeshCore KISS Modem Protocol
Serial protocol for the KISS modem firmware. Enables sending/receiving MeshCore packets over LoRa and cryptographic operations using the modem's identity.
## Serial Configuration
115200 baud, 8N1, no flow control.
## Frame Format
Standard KISS framing with byte stuffing.
| Byte | Name | Description |
|------|------|-------------|
| `0xC0` | FEND | Frame delimiter |
| `0xDB` | FESC | Escape character |
| `0xDC` | TFEND | Escaped FEND (FESC + TFEND = 0xC0) |
| `0xDD` | TFESC | Escaped FESC (FESC + TFESC = 0xDB) |
```
┌──────┬─────────┬──────────────┬──────┐
│ FEND │ Command │ Data (escaped)│ FEND │
│ 0xC0 │ 1 byte │ 0-510 bytes │ 0xC0 │
└──────┴─────────┴──────────────┴──────┘
```
Maximum unescaped frame size: 512 bytes.
## Commands
### Request Commands (Host → Modem)
| Command | Value | Data |
|---------|-------|------|
| `CMD_DATA` | `0x00` | Packet (2-255 bytes) |
| `CMD_GET_IDENTITY` | `0x01` | - |
| `CMD_GET_RANDOM` | `0x02` | Length (1 byte, 1-64) |
| `CMD_VERIFY_SIGNATURE` | `0x03` | PubKey (32) + Signature (64) + Data |
| `CMD_SIGN_DATA` | `0x04` | Data to sign |
| `CMD_ENCRYPT_DATA` | `0x05` | Key (32) + Plaintext |
| `CMD_DECRYPT_DATA` | `0x06` | Key (32) + MAC (2) + Ciphertext |
| `CMD_KEY_EXCHANGE` | `0x07` | Remote PubKey (32) |
| `CMD_HASH` | `0x08` | Data to hash |
| `CMD_SET_RADIO` | `0x09` | Freq (4) + BW (4) + SF (1) + CR (1) |
| `CMD_SET_TX_POWER` | `0x0A` | Power dBm (1) |
| `CMD_SET_SYNC_WORD` | `0x0B` | Sync word (1) |
| `CMD_GET_RADIO` | `0x0C` | - |
| `CMD_GET_TX_POWER` | `0x0D` | - |
| `CMD_GET_SYNC_WORD` | `0x0E` | - |
| `CMD_GET_VERSION` | `0x0F` | - |
### Response Commands (Modem → Host)
| Command | Value | Data |
|---------|-------|------|
| `CMD_DATA` | `0x00` | SNR (1) + RSSI (1) + Packet |
| `RESP_IDENTITY` | `0x11` | PubKey (32) |
| `RESP_RANDOM` | `0x12` | Random bytes (1-64) |
| `RESP_VERIFY` | `0x13` | Result (1): 0x00=invalid, 0x01=valid |
| `RESP_SIGNATURE` | `0x14` | Signature (64) |
| `RESP_ENCRYPTED` | `0x15` | MAC (2) + Ciphertext |
| `RESP_DECRYPTED` | `0x16` | Plaintext |
| `RESP_SHARED_SECRET` | `0x17` | Shared secret (32) |
| `RESP_HASH` | `0x18` | SHA-256 hash (32) |
| `RESP_OK` | `0x19` | - |
| `RESP_RADIO` | `0x1A` | Freq (4) + BW (4) + SF (1) + CR (1) |
| `RESP_TX_POWER` | `0x1B` | Power dBm (1) |
| `RESP_SYNC_WORD` | `0x1C` | Sync word (1) |
| `RESP_VERSION` | `0x1D` | Version (1) + Reserved (1) |
| `RESP_ERROR` | `0x1E` | Error code (1) |
| `RESP_TX_DONE` | `0x1F` | Result (1): 0x00=failed, 0x01=success |
## Error Codes
| Code | Value | Description |
|------|-------|-------------|
| `ERR_INVALID_LENGTH` | `0x01` | Request data too short |
| `ERR_INVALID_PARAM` | `0x02` | Invalid parameter value |
| `ERR_NO_CALLBACK` | `0x03` | Radio callback not set |
| `ERR_MAC_FAILED` | `0x04` | MAC verification failed |
| `ERR_UNKNOWN_CMD` | `0x05` | Unknown command |
| `ERR_ENCRYPT_FAILED` | `0x06` | Encryption failed |
## Data Formats
### Radio Parameters (CMD_SET_RADIO / RESP_RADIO)
All values little-endian.
| Field | Size | Description |
|-------|------|-------------|
| Frequency | 4 bytes | Hz (e.g., 869618000) |
| Bandwidth | 4 bytes | Hz (e.g., 62500) |
| SF | 1 byte | Spreading factor (5-12) |
| CR | 1 byte | Coding rate (5-8) |
### Received Packet (CMD_DATA response)
| Field | Size | Description |
|-------|------|-------------|
| SNR | 1 byte | Signal-to-noise × 4, signed |
| RSSI | 1 byte | Signal strength dBm, signed |
| Packet | variable | Raw MeshCore packet |
## Notes
- Modem generates identity on first boot (stored in flash)
- SNR values multiplied by 4 for 0.25 dB precision
- Wait for `RESP_TX_DONE` before sending next packet
- See [packet_structure.md](./packet_structure.md) for packet format