Jared Dohrman
b1a32fa56b
fix: make repeater stats battery display board-aware
2026-04-22 10:57:04 +10:00
Jared Dohrman
bbab7c95d4
refactor: remove legacy battery reporting toggle path
2026-04-22 09:57:51 +10:00
Jared Dohrman
63e9368c84
fix: improve stats archive rotation and satellites trend handling
2026-04-21 19:14:17 +10:00
Jared Dohrman
0ad50e5bd0
repeater-mqtt-eastmesh-v1.3.8
2026-04-21 18:07:04 +10:00
Jared Dohrman
746396aee9
fix: sd card shares the radio SPI object
2026-04-21 16:01:19 +10:00
Jared Dohrman
bf57f342b3
fix: require configured mqtt iata before broker connect
2026-04-20 22:30:06 +10:00
Jared Dohrman
6aeb8782d9
fix: update repeater MQTT partition layouts for 4 MB boards
2026-04-19 15:33:04 +10:00
Jared Dohrman
2646d7177e
Merge upstream/dev into develop
2026-04-19 12:21:01 +10:00
ripplebiz и GitHub
35b5548c0c
Merge pull request #2328 from recrof/xiao_c3-companion-fix
...
fix: remove sensors from xiao c3 companion because of bootloops
2026-04-18 20:44:15 +10:00
Liam Cottle и GitHub
54a48da6b5
Merge pull request #2306 from petrkr/otaupdate2
...
SDK3.x: Fix OTA includes, bump Async version
2026-04-18 19:56:56 +12:00
Rastislav Vysoky
0899f66034
fix: remove sensors from xiao c3 companion because of bootloops
2026-04-18 09:42:27 +02:00
Jared Dohrman
b635bd1327
fix: add missing TBeam 1W flash partition size
2026-04-17 19:16:03 +10:00
Jared Dohrman
e05c9bc09c
Merge upstream/dev into develop
2026-04-17 17:54:47 +10:00
jirogit
230c9af87b
feat: add USB Companion Radio env for Heltec Wireless Paper
2026-04-15 19:43:51 -07:00
Jared Dohrman
a0c8f80504
chore: remove ESP32-C3 target support and CI coverage
2026-04-15 18:24:36 +10:00
Jared Dohrman
3919a6e36f
fix: clean up web panel build filters and tune /stats signal meters
2026-04-15 17:59:23 +10:00
Petr Kracik
e6c6282d40
Variants: Enable ElegantOTA on ESP32-C6 devices
2026-04-14 15:40:31 +02:00
Rastislav Vysoky и GitHub
bd05eca9f5
Add OFFLINE_QUEUE_SIZE=256 for xiao nrf52 companion usb
2026-04-13 21:09:56 +02:00
Huw Duddy и GitHub
49221fc159
Merge pull request #2298 from TheMalkavien/fix/waveshare-rp2040-rx-sensitivity
...
Fixes #2294 : RX path not enabled on Waveshare RP2040
2026-04-14 01:36:26 +10:00
Jared Dohrman
631fcc67fb
docs: improve board guidance and normalise eastmesh mqtt targets
2026-04-13 16:01:22 +10:00
Liam Cottle и GitHub
748f9cfdda
Merge pull request #2072 from robekl/fix-t1000e-pin-comments
...
Fix T1000-E pin comments
2026-04-13 02:27:19 +12:00
Liam Cottle и GitHub
3ff8b17660
Merge pull request #1833 from olanwe/set-wifi-offline-queue-sizes
...
Set OFFLINE_QUEUE_SIZE=256 for missing WiFi companion environments
2026-04-13 01:41:07 +12:00
liamcottle
7d8d66c3e6
fix compilation error in wifi variants due to not enough ram
2026-04-13 01:03:32 +12:00
Malkavien
8056344b86
fix(waveshare-rp2040): add SX126X_RXEN=17 to restore RX sensitivity
...
The Waveshare RP2040-LoRa board has an RF switch with two complementary
control lines:
- DIO2 (CTRL) -- driven automatically by the SX1262 chip: HIGH on TX,
LOW on RX
- GPIO17 (!CTRL) -- was not configured in MeshCore, so it floated and
the switch never properly selected the LNA/RX path
Without this pin driven, the RF switch never switches to RX mode,
resulting in completely degraded reception. TX was unaffected because
DIO2 alone is sufficient to activate the TX path.
Adding SX126X_RXEN=17 lets RadioLib drive GPIO17 as the complement of
DIO2, so the switch correctly routes the signal to the LNA on receive.
Reference: https://files.waveshare.com/wiki/RP2040-LoRa/Rp2040-lora-sch.pdf
2026-04-12 14:49:42 +02:00
Liam Cottle и GitHub
a9de5bfc0c
Merge pull request #1612 from weebl2000/default-button-low
...
Default button polarity to active-LOW across all firmware types
2026-04-12 23:30:28 +12:00
Liam Cottle и GitHub
f2b61f1ce5
Merge pull request #1425 from thomasabbott/tcxo_voltage_fix_rp2040
...
RP2040 Update SX126X_DIO3_TCXO_VOLTAGE to 1.8 V
2026-04-12 22:45:00 +12:00
Jared Dohrman
9e0cff9e70
chore: enable local MQTT debug builds and disable MQTT_DEBUG in GitHub workflows
2026-04-12 11:00:16 +10:00
Jared Dohrman
ca7c437c10
chore: disable MQTT_DEBUG
2026-04-12 10:55:41 +10:00
Jared Dohrman
4f4964e454
fix: add battery reporting toggle for Heltec V3 and clean up VS Code metadata
2026-04-11 18:14:30 +10:00
Jared Dohrman
6680e53ef5
fix: improve MQTT/web memory usage and streamline broker controls
2026-04-11 16:40:45 +10:00
Snayler и GitHub
d360931aa7
Merge branch 'meshcore-dev:dev' into dev
2026-04-10 18:31:52 +01:00
Jared Dohrman
328a0ecf6f
fix(mqtt): clear legacy prefs, restore status publishing, and expand web controls
2026-04-10 22:24:58 +10:00
Jared Dohrman
c5a0e63239
chore: remove MQQT_DEBUG from S3
2026-04-10 15:20:46 +10:00
Jared Dohrman
b5374a705a
feat(web,mqtt): add repeater dashboard, MQTT settings, and stabilise HTTPS/TLS startup
2026-04-10 15:18:19 +10:00
Jared Dohrman
238e19d9b7
fix: trim C3 mqtt firmware size and make web panel optional
2026-04-09 15:14:06 +10:00
Jared Dohrman
98fe78a379
feat: add MQTT repeater support, web config panel, and EastMesh-specific firmware workflows
2026-04-09 15:00:53 +10:00
me
d9cfd075a5
fix: remove real WiFi credentials from ThinkNode M5 variant
...
variants/thinknode_m5/platformio.ini contained actual WiFi SSID and
password credentials (Livebox-633C) committed by mistake. Replaced
with placeholder values consistent with other variants (myssid/mypwd).
2026-04-05 22:50:59 -07:00
Wessel Nieboer и Wessel Nieboer
057542625b
Fix T1000E press=high
2026-04-04 13:19:13 +02:00
Wessel Nieboer и Wessel Nieboer
0a13ac7fc7
Default button polarity to active-LOW across all firmware types
...
Nearly all LoRa boards use a boot button that pulls to ground when
pressed.
2026-04-04 13:19:13 +02:00
Liam Cottle и GitHub
0afd5a9336
Merge pull request #2244 from jirogit/fix/generic-espnow-advert-name
...
fix: correct ADVERT_NAME for Generic ESPNow room server (was 'Heltec Room')
2026-04-04 17:24:50 +13:00
jirogit
6769b74df6
fix: correct ADVERT_NAME for Generic ESPNow room server (was 'Heltec Room')
...
env:Generic_ESPNOW_room_svr was using 'Heltec Room' as ADVERT_NAME,
causing Generic ESPNow room server nodes to advertise with the wrong
device name on the mesh.
2026-04-03 19:08:15 -07:00
jirogit
ce32d91ecb
fix: correct ADVERT_NAME for ThinkNode M5 (was M2)
...
Repeater and Room Server environments in variants/thinknode_m5/platformio.ini
were using 'Thinknode M2' as the ADVERT_NAME, causing M5 nodes to advertise
with the wrong device name on the mesh.
- env:ThinkNode_M5_Repeater: 'Thinknode M2 Repeater' -> 'Thinknode M5 Repeater'
- env:ThinkNode_M5_room_server: 'Thinknode M2 Room Server' -> 'Thinknode M5 Room Server'
2026-04-03 18:55:39 -07:00
KPrivitt и GitHub
27f732653b
Added RAK12035 Soil Moisture and Temperature Sensor ( #2223 )
2026-04-03 22:54:24 +13:00
Liam Cottle и GitHub
d0450bca99
Merge pull request #2228 from liamcottle/refactor/gat562-mesh-watch
...
Refactor GAT562 Mesh Watch
2026-04-02 17:19:12 +13:00
Liam Cottle и GitHub
b934daa990
Merge pull request #2007 from khudson/r1neo
...
Muzi Works R1 Neo support
2026-04-02 00:36:44 +13:00
fcad0dc7ed
Apply suggestion from @weebl2000
...
Co-authored-by: Wessel <wessel@weebl.me >
2026-04-02 00:27:58 +13:00
8fc9e1736c
Apply suggestion from @weebl2000
...
Co-authored-by: Wessel <wessel@weebl.me >
2026-04-02 00:23:52 +13:00
liamcottle
b37201db89
double press top button to go back on gat562 mesh watch
2026-04-01 21:51:32 +13:00
liamcottle
1a897a3b5f
use top button to wake hibernated gat562 mesh watch
2026-04-01 21:50:33 +13:00
Liam Cottle и GitHub
856df241ee
Merge pull request #2138 from MGJ520/dev_GAT562_Mesh_Watch13
...
Support for GAT562 Mesh Watch13 device
2026-03-31 21:54:38 +13:00
Jared Dohrman