feat: Added EByte EoRa Pi

boards/ebyte_eora-s3.json

@@ -0,0 +1,45 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default.csv",
+      "memory_type": "qio_qspi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DARDUINO_LILYGO_T3_S3_V1_X",
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1",
+      "-DARDUINO_USB_MODE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "mcu": "esp32s3",
+    "variant": "esp32s3"
+  },
+  "connectivity": [
+    "wifi"
+  ],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": [
+    "arduino",
+    "espidf"
+  ],
+  "name": "Ebyte EoRa-S3-XXXTB Radio",
+  "upload": {
+    "flash_size": "4MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 4194304,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 460800
+  },
+  "url": "https://www.cdebyte.com/products/EoRa-S3-900TB",
+  "vendor": "Chengdu Ebyte Electronic Technology Co., Ltd"
+}

variants/ebyte_eora_s3/platformio.ini

@@ -0,0 +1,135 @@
+[Ebyte_EoRa-S3]
+extends = esp32_base
+board = ebyte_eora-s3
+build_flags =
+  ${esp32_base.build_flags}
+  -I variants/ebyte_eora_s3
+  -D EBYTE_EORA_S3
+  -D P_LORA_DIO_1=33
+  -D P_LORA_NSS=7
+  -D P_LORA_RESET=8   ; RADIOLIB_NC
+  -D P_LORA_BUSY=34
+  -D P_LORA_SCLK=5
+  -D P_LORA_MISO=3
+  -D P_LORA_MOSI=6
+  -D P_LORA_TX_LED=37
+  -D PIN_VBAT_READ=1
+  -D PIN_USER_BTN=0
+  -D PIN_BOARD_SDA=18
+  -D PIN_BOARD_SCL=17
+  -D PIN_OLED_RESET=21
+
+; SD_DAT0/MISO - GPIO2
+; SD_DAT1 - GPIO4
+; SD_CMD/MOSI - GPIO11
+; SD_DAT2 - GPIO112
+; SD_DAT3/CS - GPIO113
+; SD_CLK - GPIO114
+
+  -D SX126X_DIO2_AS_RF_SWITCH=true
+  -D SX126X_DIO3_TCXO_VOLTAGE=1.8
+  -D SX126X_CURRENT_LIMIT=140
+  -D RADIO_CLASS=CustomSX1262
+  -D WRAPPER_CLASS=CustomSX1262Wrapper
+  -D LORA_TX_POWER=22
+  -D SX126X_RX_BOOSTED_GAIN=1
+build_src_filter = ${esp32_base.build_src_filter}
+  +<../variants/ebyte_eora_s3>
+lib_deps =
+  ${esp32_base.lib_deps}
+  adafruit/Adafruit SSD1306 @ ^2.5.13
+
+; === EByte EORA_S3 with SX1262 environments ===
+[env:Ebyte_EoRa-S3_Repeater]
+extends = Ebyte_EoRa-S3
+build_flags =
+  ${Ebyte_EoRa-S3.build_flags}
+  -D DISPLAY_CLASS=SSD1306Display
+  -D ADVERT_NAME='"EORA_S3-1262 Repeater"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=8
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${Ebyte_EoRa-S3.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
+  +<../examples/simple_repeater>
+lib_deps =
+  ${Ebyte_EoRa-S3.lib_deps}
+  ${esp32_ota.lib_deps}
+
+[env:Ebyte_EoRa-S3_terminal_chat]
+extends = Ebyte_EoRa-S3
+build_flags =
+  ${Ebyte_EoRa-S3.build_flags}
+  -D MAX_CONTACTS=300
+  -D MAX_GROUP_CHANNELS=1
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${Ebyte_EoRa-S3.build_src_filter}
+  +<../examples/simple_secure_chat/main.cpp>
+lib_deps =
+  ${Ebyte_EoRa-S3.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:Ebyte_EoRa-S3_room_server]
+extends = Ebyte_EoRa-S3
+build_flags =
+  ${Ebyte_EoRa-S3.build_flags}
+  -D DISPLAY_CLASS=SSD1306Display
+  -D ADVERT_NAME='"EORA_S3-1262 Room"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D ROOM_PASSWORD='"hello"'
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${Ebyte_EoRa-S3.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
+  +<../examples/simple_room_server>
+lib_deps =
+  ${Ebyte_EoRa-S3.lib_deps}
+  ${esp32_ota.lib_deps}
+
+[env:Ebyte_EoRa-S3_companion_radio_usb]
+extends = Ebyte_EoRa-S3
+build_flags =
+  ${Ebyte_EoRa-S3.build_flags}
+  -I examples/companion_radio/ui-new
+  -D DISPLAY_CLASS=SSD1306Display
+  -D MAX_CONTACTS=300
+  -D MAX_GROUP_CHANNELS=8
+; NOTE: DO NOT ENABLE -->  -D MESH_PACKET_LOGGING=1
+; NOTE: DO NOT ENABLE -->  -D MESH_DEBUG=1
+build_src_filter = ${Ebyte_EoRa-S3.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
+  +<helpers/ui/MomentaryButton.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${Ebyte_EoRa-S3.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:Ebyte_EoRa-S3_companion_radio_ble]
+extends = Ebyte_EoRa-S3
+build_flags =
+  ${Ebyte_EoRa-S3.build_flags}
+  -I examples/companion_radio/ui-new
+  -D DISPLAY_CLASS=SSD1306Display
+  -D MAX_CONTACTS=300
+  -D MAX_GROUP_CHANNELS=8
+  -D BLE_PIN_CODE=123456
+  -D BLE_DEBUG_LOGGING=1
+  -D OFFLINE_QUEUE_SIZE=256
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${Ebyte_EoRa-S3.build_src_filter}
+  +<helpers/esp32/*.cpp>
+  +<helpers/ui/SSD1306Display.cpp>
+  +<helpers/ui/MomentaryButton.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${Ebyte_EoRa-S3.lib_deps}
+  densaugeo/base64 @ ~1.4.0

variants/ebyte_eora_s3/target.cpp

@@ -0,0 +1,48 @@
+#include <Arduino.h>
+#include "target.h"
+
+ESP32Board board;
+
+static SPIClass spi;
+RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
+WRAPPER_CLASS radio_driver(radio, board);
+
+ESP32RTCClock fallback_clock;
+AutoDiscoverRTCClock rtc_clock(fallback_clock);
+SensorManager sensors;
+
+#ifdef DISPLAY_CLASS
+  DISPLAY_CLASS display;
+  MomentaryButton user_btn(PIN_USER_BTN, 1000, true);
+#endif
+
+#ifndef LORA_CR
+  #define LORA_CR      5
+#endif
+
+bool radio_init() {
+  fallback_clock.begin();
+  rtc_clock.begin(Wire);
+  
+  return radio.std_init(&spi);
+}
+
+uint32_t radio_get_rng_seed() {
+  return radio.random(0x7FFFFFFF);
+}
+
+void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
+  radio.setFrequency(freq);
+  radio.setSpreadingFactor(sf);
+  radio.setBandwidth(bw);
+  radio.setCodingRate(cr);
+}
+
+void radio_set_tx_power(uint8_t dbm) {
+  radio.setOutputPower(dbm);
+}
+
+mesh::LocalIdentity radio_new_identity() {
+  RadioNoiseListener rng(radio);
+  return mesh::LocalIdentity(&rng);  // create new random identity
+}

variants/ebyte_eora_s3/target.h

@@ -0,0 +1,29 @@
+#pragma once
+
+#define RADIOLIB_STATIC_ONLY 1
+#include <RadioLib.h>
+#include <helpers/radiolib/RadioLibWrappers.h>
+#include <helpers/ESP32Board.h>
+#include <helpers/radiolib/CustomSX1262Wrapper.h>
+#include <helpers/AutoDiscoverRTCClock.h>
+#include <helpers/SensorManager.h>
+#ifdef DISPLAY_CLASS
+  #include <helpers/ui/SSD1306Display.h>
+  #include <helpers/ui/MomentaryButton.h>
+#endif
+
+extern ESP32Board board;
+extern WRAPPER_CLASS radio_driver;
+extern AutoDiscoverRTCClock rtc_clock;
+extern SensorManager sensors;
+
+#ifdef DISPLAY_CLASS
+  extern DISPLAY_CLASS display;
+  extern MomentaryButton user_btn;
+#endif
+
+bool radio_init();
+uint32_t radio_get_rng_seed();
+void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
+void radio_set_tx_power(uint8_t dbm);
+mesh::LocalIdentity radio_new_identity();