Commit Graph
3598 Commits
Author SHA1 Message Date
prabathbr 20282ec1d2 Adding Xiao_S3_LoRa2021F33-2G4_companion_radio_wifi varient 2026-08-18 02:30:03 +10:00
prabathbr 1e9c14fc8b Adding Observer, ESP-NOW observer, MQTT-bridge observer builds for Xiao S3 + NiceRF LoRa2021F33-2G4 variant for (based on dkmr27's board layout from https://github.com/dkmr27/MeshCore/tree/dev/variants/xiao_s3_LoRa2021F33-2G4) 2026-08-18 02:21:58 +10:00
xJARiDandGitHub 47faf672b9 Merge pull request #82 from xJARiD/develop
Sync with upstream with fix for reply handling and improve FEM gain preferences
2026-08-15 08:55:39 +10:00
Jared DohrmanandClaude Fable 5 4445fb9f4d docs(release): add 1.17.1 and 2026.8.2 notes across release tracks
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-08-15 08:50:47 +10:00
Jared Dohrman d3dbc0a063 Merge remote-tracking branch 'upstream/dev' into integrate-upstream-dev-2026-08-15
# Conflicts:
#	src/helpers/ui/SH1106Display.cpp
2026-08-15 08:41:31 +10:00
Scott Powell d929643524 * version 1.17.1 2026-08-14 22:19:19 +10:00
Huw DuddyandGitHub 24bdc24b39 Merge pull request #3206 from meshcore-dev/nrf-combine-rng-entropy
combine radio's entropy with CC310 RNG
2026-08-14 22:09:26 +10:00
Scott Powell fcb9bdf209 * combine radio's entropy with CC310 RNG 2026-08-14 17:46:43 +10:00
Huw DuddyandGitHub 50a51a6479 Merge pull request #3203 from meshcore-dev/companion-fem-pref-fix
commenting out the load/save of the fem_ properties
2026-08-14 16:44:59 +10:00
Scott Powell e78bff0041 * unit test no longer valid 2026-08-14 16:42:54 +10:00
Scott Powell 890a2e2cff * commenting out the load/save of the fem_ properties, until they can be set 2026-08-14 16:30:12 +10:00
Jared DohrmanandClaude Fable 5 088d7f40f9 feat(observer-wifi): gateway watchdog and wifi reconnect command
Both Clyde North observers sat WL_CONNECTED on an AP that kept beaconing
after its bridge to the wired LAN died: association up, good RSSI, stale
DHCP lease, but ARP-invisible and both MQTT brokers stuck in backoff.
The firmware equated "associated" with "online", so neither node ever
re-scanned and the outage held until a manual reassociation.

Add a connectivity watchdog to NetworkService: while connected, ARP-probe
the gateway every 30s (posted to the lwIP tcpip thread, safe on both the
IDF4 and IDF5 cores). If the gateway stays silent for 3 minutes, clear
the channel hint and force a full disconnect/rescan so the node can roam
to a healthy AP, backing off exponentially (up to 48min) while the
outage persists. Nodes without a gateway skip the probe.

Add a `wifi reconnect` repeater command that triggers the same forced
reassociation on demand, and report `gw:ok|lost wd:<count>` in
`get wifi.status`. Teach the web panel parser the new fields (also fixes
the IP metric rendering as "x.x.x.x channel:n") and show Gateway and
Channel in the Wi-Fi card.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-08-13 19:23:12 +10:00
ripplebizandGitHub b09cb27a1f Merge pull request #3106 from ViezeVingertjes/fix/scoped-reply-routing
Fix replies dropped when flood.max.unscoped is low
2026-08-13 15:00:37 +10:00
ripplebizandGitHub abd3546d75 Merge pull request #3189 from oltaco/nrf52-unused-pin-sweep
Fix unused pin definitions on some NRF52 boards
2026-08-13 13:48:59 +10:00
taco 7cd1d207af Fix LilyGo T-Echo Lite SPI pins 2026-08-13 00:53:58 +10:00
taco c2a4ef082f Fix Heltec MeshPocket SPI pins 2026-08-13 00:15:34 +10:00
taco 3ea541f1f2 Fix Heltec T1 pin definitions
SPI pins that are set to -1 cause OOB reads on NRF52. The unused Serial2 pin definitions were removed to avoid potential issues with the Uart framework.
2026-08-13 00:12:37 +10:00
ripplebizandGitHub e9edfc8e1a Merge pull request #3188 from oltaco/heltec-t096-pin-fix
Fix Heltec T096 Tx issue
2026-08-12 23:00:31 +10:00
taco 49d9f9a839 Heltec T096: fix PIN_SPI1_MISO
Setting SPI pins to values that are OOB of the g_ADigitalPinMap[] array causes OOB reads. This variant.h has pin 0 as 0xFF which passes through as NRFX_SPIM_PIN_NOT_USED.
2026-08-12 22:31:57 +10:00
taco f43e1cde89 Revert "t096 compiler layout workaround"
This reverts commit 9c60f9696e.
2026-08-12 22:28:36 +10:00
taco 264d778168 Revert "T096 PA_CTX pin direction workaround"
This reverts commit 82de18fb0e.
2026-08-12 22:28:05 +10:00
ripplebizandGitHub 956094b271 Merge pull request #3185 from oltaco/fix-techo-card-txco-voltage
Set T-Echo Card TCXO voltage to 3.0
2026-08-12 18:13:44 +10:00
ripplebizandGitHub a4ab7f0e59 Merge pull request #3137 from agessaman/feat/station-g3-fem-prefs
Station G3: Expose, persist, and apply FEM gain preferences
2026-08-12 16:11:23 +10:00
taco 9d6dcc673e set T-Echo Card TCXO voltage to 3.0
as per https://github.com/meshcore-dev/MeshCore/pull/3140 and https://github.com/Xinyuan-LilyGO/T-Echo-Lite/issues/14
2026-08-12 16:08:05 +10:00
ripplebizandGitHub 1cb308b694 Merge pull request #3182 from oltaco/t096-tx-workaround
Workaround for Heltec T096 transmit issue
2026-08-12 14:49:32 +10:00
taco 82de18fb0e T096 PA_CTX pin direction workaround 2026-08-12 14:07:31 +10:00
taco 9c60f9696e t096 compiler layout workaround
see https://github.com/meshcore-dev/MeshCore/issues/3151
2026-08-12 14:04:50 +10:00
ripplebizandGitHub e027263d1e Merge pull request #3154 from fdlamotte/nrf52_hwcrypto_init
nrf52: call nRFCrypto.begin()/end() only once
2026-08-12 12:14:21 +10:00
Huw DuddyandGitHub 34ad059afb Merge pull request #3170 from recrof/promicro-pin-tidy-up
[promicro] make pinmap more tidy, move the LoRa pins to variant.h
2026-08-11 18:43:20 +10:00
Rastislav Vysoky 5cce5cfe97 removed misleading 'GPIO' from pin numbers 2026-08-11 10:37:20 +02:00
ripplebizandGitHub fbef2ff0dc Merge pull request #3164 from weebl2000/fix-tbeam-s3-display
Fix display issues on T-beam Supreme S3
2026-08-11 14:39:39 +10:00
agessaman e2aa7b98f9 feat(companion_radio): add external FEM gain preferences for RX and TX for companions
Introduced consistent preferences for external LoRa FEM RX and TX gain settings in NodePrefs. Updated companion MyMesh to apply these settings during initialization and transmission. Added unit tests to verify the round-trip serialization of these new preferences.
2026-08-10 11:59:26 -07:00
Rastislav Vysoky a82dc1b9da make promicro pinmap more tidy, move the LoRa pins to variant.h 2026-08-10 20:13:59 +02:00
Liam CottleandGitHub 9d8894e166 Merge pull request #3166 from recrof/debug-noise-floor-flag
move RadioLibWrapper noise_floor level message under special debug flag
2026-08-11 03:07:31 +12:00
Rastislav Vysoky 3138ad99ba move RadioLibWrapper noise_floor level message under special debug flag 2026-08-10 16:56:56 +02:00
Wessel Nieboer 32bd6d48d6 Fix T-beam Supreme S3 display 2026-08-10 13:39:16 +02:00
Huw DuddyandGitHub f6c25e6a25 Merge pull request #3158 from mepholic/bug/fix-rxgain-setting-post-agc-reset
Fix RX Boosted Gain setting after AGC reset is triggered
2026-08-10 17:31:38 +10:00
ripplebizandGitHub 9941669fd5 Merge pull request #3142 from oltaco/buildfix-userbtn
Build fix for R1 Neo and Minewsemi repeater
2026-08-10 13:30:24 +10:00
ripplebizandGitHub 0d60de6fa6 Merge pull request #3146 from oltaco/lr2021-preamble-and-irq-timeout
LR2021: add PREAMBLE_DETECTED bit and IRQ timeout logic
2026-08-10 13:29:12 +10:00
Dan Theisen 6f491f3033 RX Boosted Gain was set back to the compiled in value rather than the current/flash value set by the user when the ACG reset is triggered. This commit fixes this. 2026-08-09 18:11:35 -07:00
Florent ecb8c94560 nrf52: call nRFCrypto.begin()/end() only once 2026-08-09 14:46:23 -04:00
Huw DuddyandGitHub a1c50e15dd Merge pull request #3148 from recrof/add-missing-kiss-radio
add missing kiss radio roles, add kiss radio build to build.sh
2026-08-09 22:22:08 +10:00
Rastislav Vysoky c2d57f08c8 add missing kiss radio roles, add kiss radio build to build.sh 2026-08-09 14:17:18 +02:00
Huw DuddyandGitHub f310afb5e5 Merge pull request #3140 from entr0p1/fix/techo-lite-pins
Lilygo T-Echo Lite Pin Fixes
2026-08-09 22:06:21 +10:00
taco ce62c8b5d7 LR2021: add PREAMBLE_DETECTED bit and IRQ timeout logic 2026-08-09 21:41:22 +10:00
xJARiDandGitHub be2860c6ad Merge pull request #81 from xJARiD/develop
Fix STA scanning to improve recovery AP stability and documentation
2026-08-09 18:46:00 +10:00
Jared DohrmanandClaude Fable 5 f94229879f docs: document companion app roaming over the recovery AP
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-08-09 18:41:54 +10:00
Jared DohrmanandClaude Fable 5 cfb4cc9bc6 fix(companion-wifi): quiesce STA scanning so the recovery AP is joinable
With saved credentials present (seeded from the WIFI_SSID build flag on
first boot), the recovery AP came up in AP+STA mode while auto-reconnect
and the 10s manual retry kept the station scanning. STA scans drag the
shared radio across channels, so joining clients' WPA2 handshakes timed
out - reported by phones as a wrong password.

Disable auto-reconnect and pause the 10s retry loop while the recovery
AP is active; retry the configured network once a minute instead, so the
AP stays stable between attempts and the node still self-recovers (and
shuts the AP down) when its network returns.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-08-09 18:34:19 +10:00
taco 39934d6999 minewsemi: build fix and platformio.ini tidy up
fixes minewsemi repeater failing build due to user_btn missing.
2026-08-09 18:33:27 +10:00
xJARiDandGitHub 056491e09c Merge pull request #80 from xJARiD/develop
Fix SH1106 boot crash and update release notes for display fix
2026-08-09 18:17:05 +10:00