Pins move from core-v1.17.4 to core-v1.18.0, cut from the main meshcomod
companion-v1.18.0.1 was released from. The companion changes are ported from
meshcomod's rebase into wadamesh's own MyMesh:
- onCLICommandRecv: a contact's remote CLI command runs when the user granted
that contact remote CLI, and lands in the chat as a CLI message otherwise.
- CMD_RUN_CLI_COMMAND (66) / RESP_CODE_CLI_REPLY (29) and the local companion CLI
(name, pin, Wi-Fi, radio, af/dutycycle, rxgain, tx, rxdelay, path.hash.mode,
multi.acks, board, ver), also reachable from the serial CLI. Settings without a
prefs field answer "unsupported". NodePrefs layout unchanged.
- TXT_TYPE_CLI_COMMAND is accepted for sending; sendCommandData (and our queue-
preserving wrapper) carry the text type.
- Channel data is delivered to the app (onChannelDataRecv), unsolicited responses
(pushed telemetry) reach it as PUSH_CODE_BINARY_RESPONSE, and raw-data sends
decode multi-byte-hash paths.
Clock: 1.18 seeds an unsynced ESP32 clock at 1 Mar 2026, so ClockFloorRTC's
MIN_VALID_EPOCH follows it (a set equal to the seed must stay invalid).
Pager LR1121: the AGC reset re-applies the boosted-gain setting (new core arg).
IDF builds exclude the new CommonRadioPrefs.cpp (needs <target.h>/radio_driver).
The 2 MB Heltec V4 went to 100.0% with the CLI. Its built-in language table is now
one raw-deflated blob per language (895 KB -> 312 KB), inflated into PSRAM by the
S3 ROM on first use (~10 ms, ~75 KB for the active language): 91.7% flash. Checked
on a T-Deck forced onto the table (nl, hu, el) and by the post-link key check.
Builds: all 15 S3 touch envs, Tanmatsu (3,237,024 B), T-Display P4 SX1262 + LR2021.
T-Deck boots and runs on 1.18.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
