Kaj SchittecatandClaude Opus 5.5
d3a9cf1453
Spectrum: stat tiles (peak, floor, our channel, busy), plot and waterfall drawn at screen size (the lv_chart and zoomed waterfall were the page's render cost), dark-to-yellow waterfall, peak hold, our-channel marker, Band/Channel and Live/1 min/10 min chips. RF Monitor 1.4 (tiles, filled chart, typed feed, packet detail card; the old type table did not match MeshCore payload types) and Airtime 1.6 (big figure, tiles, duty line, rx/tx split). Lua SDK: ui.panel, bold labels and a size-24 figure font, colors.warn/border, app.on_audio (fires with the screen off), read-only wada.sd.list and sd: audio on the SD_MMC boards (P4, Tanmatsu, Wio L2), caps panel/audio_events/epaper, a "music" icon and an "audio" Store requirement. button:set() no longer writes label fields into the button object (heap corruption, every earlier firmware). The SDK page's input table described events the firmware never sent. Music 1.0 (Store app): plays MP3/WAV from the card's Music folder, shuffle, repeat, keeps going through the list with the screen off. Verified on the T-Display P4 end to end. Store: the update check also fetches the app catalog and badges the Store tile with the number of installed apps that have a newer version. Baked Lua apps are raw-deflated and inflated by the S3 ROM (14.6 KB back on the V4); the V4 language table keeps only texts of apps it can run. Fixes: the SD-card notice no longer fires when the card mounts fine (#667); the Control Center clock keeps time while open (#666); M9 keyboard brightness (#664); the battery widget's number no longer sits on a ring too small for it (Discord); M9 shortcuts doc follows #669's composer order. New texts in all 14 languages. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
wadamesh.com infrastructure
Distribution stack for wadamesh: a VPS nginx origin behind Cloudflare.
tiles.wadamesh.com →CF (HTTP, edge-cached) → nginx → OpenStreetMap / OpenTopoMap
firmware.wadamesh.com →CF (cache bins) → nginx → /srv/wadamesh/firmware
flasher.wadamesh.com →CF (HTTPS) → 301 → wadamesh.com
wadamesh.com →CF (HTTPS) → nginx → /srv/wadamesh/site
Map tile styles. The default /{z}/{x}/{y}.jpg route serves OpenStreetMap
(the firmware default). An opt-in OpenTopoMap topographic style is served from
/opentopo/{z}/{x}/{y}.jpg (explicit OSM alias at /osm/...); the device requests
it only when the user enables Map → Options → Topographic map. Legal: OpenTopoMap
map tiles are © OpenTopoMap (CC-BY-SA) over © OpenStreetMap contributors
(ODbL) + SRTM — the touch UI shows that attribution when topo is active, and the
14-day disk cache keeps each tile hitting OpenTopoMap at most once per fortnight
(their tile-usage policy asks for a contactable UA + caching, both of which the
transcode service provides). Deploying the topo routes = update
tiles.wadamesh.com.conf + tile-transcode.py, then
systemctl restart wadamesh-tile-transcode && nginx -t && systemctl reload nginx
and purge the Cloudflare cache for tiles.wadamesh.com/opentopo/*.
The firmware fetches tiles + the update-check over plain HTTP (on-device HTTPS isn't viable — mbedTLS needs ~30 KB heap, only ~5 KB is free post-Wi-Fi), so the tile + firmware hosts must stay reachable over HTTP. Cloudflare provides the edge cache, HTTPS for the flasher, and hides the origin IP (so no IP lives in this repo or the firmware).
1. VPS (origin)
sudo apt install nginx
sudo mkdir -p /srv/wadamesh/firmware/releases/TOUCH /var/cache/nginx/wadamesh-tiles
sudo cp deploy/nginx/tiles.wadamesh.com.conf /etc/nginx/sites-available/
sudo cp deploy/nginx/firmware.wadamesh.com.conf /etc/nginx/sites-available/
sudo ln -s /etc/nginx/sites-available/tiles.wadamesh.com.conf /etc/nginx/sites-enabled/
sudo ln -s /etc/nginx/sites-available/firmware.wadamesh.com.conf /etc/nginx/sites-enabled/
sudo nginx -t && sudo systemctl reload nginx
2. Cloudflare
- DNS:
A/AAAArecords fortiles,firmware,flasher,@→ the VPS IP, all Proxied (orange cloud). - SSL/TLS: mode Flexible (CF↔origin HTTP) is enough since the origin is
HTTP-only. Do NOT enable "Always Use HTTPS" on
tiles.orfirmware.— the firmware needs plain HTTP there. - Cache Rules:
tiles.wadamesh.com/*→ Eligible for cache, Edge TTL ~14d.firmware.wadamesh.com/releases/*/*.bin→ cache, Edge TTL ~1d.firmware.wadamesh.com/releases/TOUCH(the listing) → short TTL (~60s) or Bypass, so new releases appear promptly.
3. Publishing a release
From a wadamesh checkout (builds both boards, refreshes the listing, rsyncs up):
WADAMESH_VPS=user@your-vps scripts/release.sh beta_2
The on-device check GETs http://firmware.wadamesh.com/releases/TOUCH, finds the
highest beta_<N>, and (once OTA-over-Wi-Fi is re-enabled) pulls
…/releases/TOUCH/beta_<N>/<board>.bin.
Done
- Web flasher ✅ — the guided install page at
wadamesh.com, served fromdeploy/site/and published byscripts/deploy-site.sh(esp-web-tools / Web Serial, per-board install buttons + .bin downloads, manifests generated per release byscripts/build/gen-flasher-meta.pyinto the/latest/and/latest-beta/feeds thatrelease.shrefreshes each publish). flasher.wadamesh.com301-redirects to the apex (seedeploy/nginx/flasher.wadamesh.com.conf) — it is an alias, not its own page.deploy/flasher/is the original standalone flasher page. No deploy script publishes it —deploy-site.shshipsdeploy/site/only — so it is effectively an offline/local copy kept in parity by hand. Retire it or wire it into a deploy target; until then, treatdeploy/site/index.htmlas the only install page users can reach.
TODO before public launch
- Re-enable OTA-over-Wi-Fi in the firmware (currently it version-checks then defers to manual flashing).
- Flip
wadameshrepo public = launch. - Decide tile-proxy sharing: dedicated
tiles.wadamesh.com(this config) vs reusing the meshcomod proxy.
Never commit the VPS IP, SSH keys, or
WADAMESH_VPS. Cloudflare fronts the origin; the deploy target is supplied via the environment at publish time.