shade/wadamesh
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 9 Wiki Activity
Files
99423e5bf8def6aa7f60ccee4e35af39b20cebb8
wadamesh/platformio.ini
T
Attaky b67f559d15 Attaky mesh series (#158) 
* attaky_mesh_series: add board variant with FT6636 touch and landscape UI

* attaky_mesh_series: P3 battery (MAX17048) + GPS + shared-I2C mutex

- AttakySharedI2C: one Wire.begin() + a mutex serializing the shared board
  I2C bus (SDA=2/SCL=1) across the FT6636 touch poll (core 0), the MAX17048
  fuel gauge (core 1), and the future AW9523 keyboard. Arduino's TwoWire
  buffers are not concurrency-safe.
- board.begin() owns the authoritative bus init; the touch driver now takes
  the lock around every transaction instead of its own Wire.begin().
- getBattMilliVolts(): real MAX17048 VCELL read (78.125 uV/LSB -> mV = raw*5/64),
  2 s cache + lock, replacing the 4000 mV stub. Upstream maps mV -> % itself.
  Hardware-verified ~4058 mV.
- GPS: rename the dead GPS_BAUD flag to GPS_BAUD_RATE (the core reads that; 9600
  only worked via the #else default). Pins verified on hardware: ESP RX = IO17
  receives ATGM336H NMEA; MeshCore's module-centric PIN_GPS_TX=17 maps correctly.

* attaky_mesh_series: Control_Keyboard_(Bottom) dual-AW9523 keyboard

Add the Control_Keyboard_(Bottom)_1.0 module as an ADDITIVE hardware
keyboard on the touch board. Two AW9523 expanders (0x5A left / 0x5B
right) each scan a 5x5 matrix over the shared board I2C bus, serialized
through the AttakySharedI2C mutex alongside the FT6636 touch poll and the
MAX17048 fuel gauge.

The driver emits final bytes (printable ASCII, backspace, enter, space)
with momentary Shift resolved to uppercase in-driver. UITask injects them
into the focused textarea exactly like the web-mirror keystroke path, so
CAP_KEYBOARD stays 0 and the on-screen keyboard is not suppressed (touch
typing does not regress). Focus-gated: the matrices are only scanned
while an editable field is bound, so a key has zero side effect when
nothing is focused.

Hardware-verified, both halves: q/w/e/r/t (0x5A) + y (0x5B), Shift
uppercase, backspace, space, enter; on-screen keyboard intact.

* attaky_mesh_series: use reliable 115200 upload speed

* attaky_mesh_series: use core default GPS baud

* attaky_mesh_series: restore GPS_BAUD setting

* attaky_mesh_series: rename PlatformIO environment
2026-07-19 13:58:05 +02:00

1477 lines
51 KiB
INI
Raw Blame History

; wadamesh — Heltec V4 TFT touch firmware.
; Standalone PlatformIO project: the MeshCore core is consumed as a library
; (lib/MeshCore here; a git-tagged fork once published). This env is the flattened
; equivalent of meshcomod's heltec_v4_tft_companion_radio_usb_tcp_touch.
[platformio]
default_envs =
heltec_v4_tft_companion_radio_usb_tcp_touch
LilyGo_TDeck_companion_radio_touch
ThinkNode_M9_companion_radio_touch
[env:heltec_v4_tft_companion_radio_usb_tcp_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = heltec_v4
monitor_speed = 115200
board_build.partitions = partitions_tft_touch.csv
extra_scripts = pre:scripts/inject_wifi_env.py, merge-bin.py
build_flags =
-Wno-deprecated-declarations -Wno-unused-parameter -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
-D MC_VENDORED_TOUCH_APP
; NOTE: tried -D ARDUINO_USB_MODE=1 (HW-CDC, drops unused TinyUSB MSC/DFU ≈ 12 KB internal
; DRAM) — but on the real V4 the binary companion link regressed: small per-message frames
; arrived yet the larger device-profile frame (node name + keys) dropped bytes over HW-CDC's
; smaller TX FIFO. Reverted to the board JSON's TinyUSB CDC. Revisit only with an HW-CDC TX
; buffer/DTR-wait fix verified on hardware. (T-Deck ships MODE=1 and is fine — board-specific.)
-D LORA_FREQ=869.618
-D LORA_BW=62.5
-D LORA_SF=8
-D ENABLE_PRIVATE_KEY_IMPORT=1
-D ENABLE_PRIVATE_KEY_EXPORT=1
-D RADIOLIB_EXCLUDE_CC1101=1
-D RADIOLIB_EXCLUDE_RF69=1
-D RADIOLIB_EXCLUDE_SX1231=1
-D RADIOLIB_EXCLUDE_SI443X=1
-D RADIOLIB_EXCLUDE_RFM2X=1
-D RADIOLIB_EXCLUDE_SX128X=1
-D RADIOLIB_EXCLUDE_AFSK=1
-D RADIOLIB_EXCLUDE_AX25=1
-D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
-D RADIOLIB_EXCLUDE_MORSE=1
-D RADIOLIB_EXCLUDE_APRS=1
-D RADIOLIB_EXCLUDE_BELL=1
-D RADIOLIB_EXCLUDE_RTTY=1
-D RADIOLIB_EXCLUDE_SSTV=1
-D ESP32_PLATFORM
; --- sensors ---
-D ENV_INCLUDE_GPS=1
-D ENV_INCLUDE_AHTX0=1
-D ENV_INCLUDE_BME280=1
-D ENV_INCLUDE_BMP280=1
-D ENV_INCLUDE_SHTC3=1
-D ENV_INCLUDE_SHT4X=1
-D ENV_INCLUDE_LPS22HB=1
-D ENV_INCLUDE_INA3221=1
-D ENV_INCLUDE_INA219=1
-D ENV_INCLUDE_INA226=1
-D ENV_INCLUDE_INA260=1
-D ENV_INCLUDE_MLX90614=1
-D ENV_INCLUDE_VL53L0X=1
-D ENV_INCLUDE_BME680=1
-D ENV_INCLUDE_BMP085=1
; --- Heltec LoRa32 V4 board ---
-I variants/heltec_v4
-D HELTEC_LORA_V4
-D USE_SX1262
-D ESP32_CPU_FREQ=80
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D P_LORA_TX_LED=35
-D P_LORA_DIO_1=14
-D P_LORA_NSS=8
-D P_LORA_RESET=12
-D P_LORA_BUSY=13
-D P_LORA_SCLK=9
-D P_LORA_MISO=11
-D P_LORA_MOSI=10
-D P_LORA_PA_POWER=7
-D P_LORA_PA_EN=2
-D P_LORA_PA_TX_EN=46
-D P_LORA_GC1109_PA_EN=2
-D P_LORA_GC1109_PA_TX_EN=46
-D P_LORA_KCT8103L_PA_CSD=2
-D P_LORA_KCT8103L_PA_CTX=5
-D PIN_USER_BTN=0
-D PIN_VEXT_EN=36
-D PIN_VEXT_EN_ACTIVE=HIGH
-D LORA_TX_POWER=10
-D MAX_LORA_TX_POWER=22
-D SX126X_REGISTER_PATCH=1
-D SX126X_DIO2_AS_RF_SWITCH=true
-D SX126X_DIO3_TCXO_VOLTAGE=1.8
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D PIN_GPS_RX=38
-D PIN_GPS_TX=39
-D PIN_GPS_RESET=42
-D PIN_GPS_RESET_ACTIVE=LOW
-D PIN_GPS_EN=34
-D PIN_GPS_EN_ACTIVE=LOW
-D PIN_ADC_CTRL=37
-D PIN_VBAT_READ=1
; --- TFT ---
-D HELTEC_LORA_V4_TFT
-D PIN_BOARD_SDA=4
-D PIN_BOARD_SCL=3
-D DISPLAY_ROTATION=2
-D DISPLAY_SCALE_X=1.0
-D DISPLAY_SCALE_Y=1.0
-D PIN_TFT_RST=18
-D PIN_TFT_VDD_CTL=-1
-D PIN_TFT_LEDA_CTL=21
-D PIN_TFT_LEDA_CTL_ACTIVE=HIGH
-D PIN_TFT_CS=15
-D PIN_TFT_DC=16
-D PIN_TFT_SCL=17
-D PIN_TFT_SDA=33
; --- CHSC6x cap touch ---
-D HAS_HELTEC_V4_CAP_TOUCH=1
-D PIN_TOUCH_SDA=47
-D PIN_TOUCH_SCL=48
-D PIN_TOUCH_RST=44
-D HELTEC_V4_BUZZER_PIN=6
; --- touch UI / companion stack ---
-I include
-I src
-I src/ui-touch
-D UI_LVGL=1
-D HAS_TOUCH_UI=1
; Heltec V4 Expansion Kit: local environment sensors UI (Sensors tab, Home env
; widget, Local-Sensors page). Board-gated — only this env compiles it.
-D HAS_EXPANSION_KIT=1
-D FIRMWARE_OTA_ENV='"heltec_v4_tft_companion_radio_usb_tcp_touch"'
-D ENABLE_ADVERT_ON_BOOT=0
-D LV_CONF_PATH=lv_conf.h
-D LV_CONF_INCLUDE_SIMPLE=1
; Smoother scroll: lower deceleration than LVGL's default (10) so flicks glide
; longer instead of stopping abruptly. lv_conf leaves this unset, so this -D wins.
-D LV_INDEV_DEF_SCROLL_THROW=7
-D USER_SETUP_LOADED=1
-D ST7789_DRIVER=1
-D TFT_WIDTH=240
-D TFT_HEIGHT=320
-D TFT_MOSI=33
-D TFT_SCLK=17
-D TFT_CS=15
-D TFT_DC=16
-D TFT_RST=18
-D TFT_MISO=-1
-D SPI_FREQUENCY=80000000
-D TFT_RGB_ORDER=TFT_RGB
-D TFT_INVERSION_ON=1
-D TFT_BL=21
-D TFT_BACKLIGHT_ON=1
-D MAX_CONTACTS=2000
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=ST7789LCDDisplay
-D ADMIN_PASSWORD='"password"'
-D MULTI_TRANSPORT_COMPANION=1
-D WADAMESH_FORK_BUILD=1
-D TCP_PORT=5000
-D WS_PORT=8765
-D BLE_PIN_CODE=123456
-D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
-D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
-D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
build_src_filter =
+<*.cpp>
+<*.c>
+<helpers/*.cpp>
+<helpers/esp32/*.cpp>
+<helpers/input/*.cpp>
+<ui-touch/*.cpp>
+<ui-touch/*.c>
+<../variants/heltec_v4/*.cpp>
lib_deps =
; MeshCore core = the meshcomod monorepo built as a lib, pinned by tag.
; Touch-app files (TouchPrefsStore, WifiRuntimeStore, transports, ...) are
; vendored in this app's src/ and dropped from the lib via -DMC_VENDORED_TOUCH_APP.
https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.16.5
SPI
Wire
jgromes/RadioLib @ ^7.6.0
rweather/Crypto @ ^0.4.0
adafruit/RTClib @ ^2.1.3
melopero/Melopero RV3028 @ ^1.1.0
electroniccats/CayenneLPP @ 1.6.1
h2zero/NimBLE-Arduino @ 1.4.3
adafruit/Adafruit INA3221 Library @ ^1.0.1
adafruit/Adafruit INA219 @ ^1.2.3
robtillaart/INA226 @ ^0.6.4
adafruit/Adafruit INA260 Library @ ^1.5.3
adafruit/Adafruit AHTX0 @ ^2.0.5
adafruit/Adafruit BME280 Library @ ^2.3.0
adafruit/Adafruit BMP280 Library @ ^2.6.8
adafruit/Adafruit SHTC3 Library @ ^1.0.1
sensirion/Sensirion I2C SHT4x @ ^1.1.2
arduino-libraries/Arduino_LPS22HB @ ^1.0.2
adafruit/Adafruit MLX90614 Library @ ^2.1.5
adafruit/Adafruit_VL53L0X @ ^1.2.4
stevemarple/MicroNMEA @ ^2.0.6
adafruit/Adafruit BME680 Library @ ^2.0.4
adafruit/Adafruit BMP085 Library @ ^1.2.4
adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
https://github.com/Quency-D/chsc6x/archive/5cbead829d6b432a8d621ed1aafd4eb474fd4f27.zip
ESP32Async/ESPAsyncWebServer @ 3.10.3
file://arch/esp32/AsyncElegantOTA
lvgl/lvgl @ ^8.3.11
bodmer/TFT_eSPI @ ^2.5.43
densaugeo/base64 @ ~1.4.0
knolleary/PubSubClient @ ^2.8.0
; ======================================================================
; Heltec WiFi LoRa 32 V4-R8 (ESP32-S3R8, 8 MB OCTAL PSRAM) + Expansion Kit V2.
; Inherits the V4 TFT env and overrides ONLY the R8 deltas. The 8 MB octal PSRAM
; claims GPIO33-37, so Heltec moved every control signal off them and the V2
; expansion put the TFT on a hardware-SPI bus SHARED with a new micro-SD slot:
; Vext 36->40 (now active-LOW) · GPS_EN 34->42 · LED 35->46 · ADC_Ctrl removed
; TFT (LovyanGFX HW-SPI): MOSI=15 SCK=16 MISO=45 CS=47 DC=48 RST=21 BL=44
; touch (CHSC6x, shares board I2C on 17/18) · micro-SD (shared TFT SPI, CS=3)
; The build defines HELTEC_LORA_V4_TFT too, so it reuses ALL the V4 touch-UI code;
; HELTEC_LORA_V4_R8 gates only the deltas. USB stays TinyUSB-CDC (USB_MODE=0) like
; the V4 — HW-CDC regresses the companion link on this family (see the V4 note).
; UNTESTED (no hardware yet) — pin sources: Meshtastic heltec_v4_r8 variant +
; Heltec V4-R8 pinmap + Expansion_board_V2.03 schematic. On-device TODO: confirm
; the CHSC6x shares Wire on 17/18, the SD_CS=3 read, and the V2 PAM8904 buzzer.
; ======================================================================
[env:heltec_v4_r8_tft_companion_radio_usb_tcp_touch]
extends = env:heltec_v4_tft_companion_radio_usb_tcp_touch
board = heltec_v4_r8
build_flags =
${env:heltec_v4_tft_companion_radio_usb_tcp_touch.build_flags}
; --- V4-R8 deltas (later -D wins on the GCC command line) ---
-D HELTEC_LORA_V4_R8
-D P_LORA_TX_LED=46
-D PIN_VEXT_EN=40
-D PIN_VEXT_EN_ACTIVE=LOW
-D PIN_GPS_EN=42
-D PIN_GPS_RESET=-1
-D PIN_ADC_CTRL=-1
-D ADC_MULTIPLIER=5.07
; TFT on hardware SPI (LovyanGFX), shared with the micro-SD
-D DISPLAY_CLASS=LGFXDisplay
-D PIN_TFT_RST=21
-D PIN_TFT_LEDA_CTL=44
-D PIN_TFT_CS=47
-D PIN_TFT_DC=48
-D PIN_TFT_SCL=16
-D PIN_TFT_SDA=15
-D PIN_TFT_MISO=45
; TFT_eSPI mirror (kept in sync though LovyanGFX drives the panel)
-D TFT_MOSI=15
-D TFT_SCLK=16
-D TFT_MISO=45
-D TFT_CS=47
-D TFT_DC=48
-D TFT_RST=21
-D TFT_BL=44
; touch (CHSC6x) + board I2C unified on GPIO17/18; micro-SD chip-select
-D PIN_TOUCH_SDA=17
-D PIN_TOUCH_SCL=18
; RST=-1 ON PURPOSE (tester repro fix): the Expansion V2 wires the CHSC6x reset to GPIO21 — the
; SAME line as the ST7789 reset. The chsc6x driver hard-pulses its RST at init (+3 retry sites),
; which RESET the LCD mid-boot and wiped its init: logo OK -> screen black -> white/garbled rows
; on any redraw. The LGFX display init already resets both chips via pin 21; the touch driver must
; never drive it (-1 = every pulse in chsc6x_platform no-ops).
-D PIN_TOUCH_RST=-1
-D PIN_TOUCH_INT=43
-D PIN_BOARD_SDA=17
-D PIN_BOARD_SCL=18
-D PIN_SD_CS=3
-D HELTEC_V4_BUZZER_PIN=-1
-D FIRMWARE_OTA_ENV='"heltec_v4_r8_tft_companion_radio_usb_tcp_touch"'
lib_deps =
${env:heltec_v4_tft_companion_radio_usb_tcp_touch.lib_deps}
lovyan03/LovyanGFX@1.2.21
; ======================================================================
; Attaky Mesh Series: `pio run -e attaky_mesh_series_companion_radio_touch`.
; ======================================================================
[env:attaky_mesh_series_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = attaky_mesh_series
monitor_speed = 115200
board_build.partitions = partitions_tft_touch.csv
extra_scripts = pre:scripts/inject_wifi_env.py, merge-bin.py
build_flags =
-Wno-deprecated-declarations -Wno-unused-parameter -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
-D MC_VENDORED_TOUCH_APP
-D LORA_FREQ=910.525
-D LORA_BW=250
-D LORA_SF=7
-D ENABLE_PRIVATE_KEY_IMPORT=1
-D ENABLE_PRIVATE_KEY_EXPORT=1
-D RADIOLIB_EXCLUDE_CC1101=1
-D RADIOLIB_EXCLUDE_RF69=1
-D RADIOLIB_EXCLUDE_SX1231=1
-D RADIOLIB_EXCLUDE_SI443X=1
-D RADIOLIB_EXCLUDE_RFM2X=1
-D RADIOLIB_EXCLUDE_SX128X=1
-D RADIOLIB_EXCLUDE_AFSK=1
-D RADIOLIB_EXCLUDE_AX25=1
-D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
-D RADIOLIB_EXCLUDE_MORSE=1
-D RADIOLIB_EXCLUDE_APRS=1
-D RADIOLIB_EXCLUDE_BELL=1
-D RADIOLIB_EXCLUDE_RTTY=1
-D RADIOLIB_EXCLUDE_SSTV=1
-D ESP32_PLATFORM
-D ENV_INCLUDE_GPS=1
-D ENV_INCLUDE_AHTX0=1
-D ENV_INCLUDE_BME280=1
-D ENV_INCLUDE_BMP280=1
-D ENV_INCLUDE_SHTC3=1
-D ENV_INCLUDE_SHT4X=1
-D ENV_INCLUDE_LPS22HB=1
-D ENV_INCLUDE_INA3221=1
-D ENV_INCLUDE_INA219=1
-D ENV_INCLUDE_INA226=1
-D ENV_INCLUDE_INA260=1
-D ENV_INCLUDE_MLX90614=1
-D ENV_INCLUDE_VL53L0X=1
-D ENV_INCLUDE_BME680=1
-D ENV_INCLUDE_BMP085=1
-I variants/attaky_mesh_series
-D ATTAKY_MESH_SERIES
-D HAS_ATTAKY_MESH_KEYBOARD=1
-D USE_SX1262
-D ESP32_CPU_FREQ=80
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D P_LORA_DIO_1=21
-D P_LORA_NSS=8
-D P_LORA_RESET=9
-D P_LORA_BUSY=16
-D P_LORA_SCLK=5
-D P_LORA_MISO=7
-D P_LORA_MOSI=6
-D PIN_USER_BTN=0
-D LORA_TX_POWER=10
-D MAX_LORA_TX_POWER=22
-D SX126X_REGISTER_PATCH=1
-D SX126X_DIO2_AS_RF_SWITCH=true
-D SX126X_DIO3_TCXO_VOLTAGE=1.8
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D PIN_GPS_RX=18
-D PIN_GPS_TX=17
-D GPS_BAUD=9600
; Keep the base rotation portrait; UITask applies the landscape transform.
-D PIN_BOARD_SDA=2
-D PIN_BOARD_SCL=1
-D DISPLAY_ROTATION=2
-D DISPLAY_SCALE_X=1.0
-D DISPLAY_SCALE_Y=1.0
-D PIN_TFT_RST=10
-D PIN_TFT_VDD_CTL=-1
-D PIN_TFT_LEDA_CTL=14
-D PIN_TFT_LEDA_CTL_ACTIVE=HIGH
-D PIN_TFT_CS=45
-D PIN_TFT_DC=12
-D PIN_TFT_SCL=11
-D PIN_TFT_SDA=13
-I include
-I src
-I src/ui-touch
-D UI_LVGL=1
-D HAS_TOUCH_UI=1
-D FIRMWARE_OTA_ENV='"attaky_mesh_series_companion_radio_touch"'
-D ENABLE_ADVERT_ON_BOOT=0
-D LV_CONF_PATH=lv_conf.h
-D LV_CONF_INCLUDE_SIMPLE=1
-D LV_INDEV_DEF_SCROLL_THROW=7
-D USER_SETUP_LOADED=1
-D ST7789_DRIVER=1
-D TFT_WIDTH=240
-D TFT_HEIGHT=320
-D TFT_MOSI=13
-D TFT_SCLK=11
-D TFT_CS=45
-D TFT_DC=12
-D TFT_RST=10
-D TFT_MISO=-1
-D SPI_FREQUENCY=80000000
-D TFT_RGB_ORDER=TFT_RGB
-D TFT_INVERSION_ON=1
-D TFT_BL=14
-D TFT_BACKLIGHT_ON=1
-D MAX_CONTACTS=2000
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=ST7789LCDDisplay
-D ADMIN_PASSWORD='"password"'
-D MULTI_TRANSPORT_COMPANION=1
-D WADAMESH_FORK_BUILD=1
-D TCP_PORT=5000
-D WS_PORT=8765
-D BLE_PIN_CODE=123456
-D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
-D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
-D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
build_src_filter =
+<*.cpp>
+<*.c>
+<helpers/*.cpp>
+<helpers/esp32/*.cpp>
+<helpers/input/*.cpp>
; The Attaky driver provides the shared touch API.
-<helpers/input/TDeckTouch.cpp>
+<ui-touch/*.cpp>
+<ui-touch/*.c>
+<../variants/attaky_mesh_series/*.cpp>
lib_deps =
https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.16.5
SPI
Wire
jgromes/RadioLib @ ^7.6.0
rweather/Crypto @ ^0.4.0
adafruit/RTClib @ ^2.1.3
melopero/Melopero RV3028 @ ^1.1.0
electroniccats/CayenneLPP @ 1.6.1
h2zero/NimBLE-Arduino @ 1.4.3
adafruit/Adafruit INA3221 Library @ ^1.0.1
adafruit/Adafruit INA219 @ ^1.2.3
robtillaart/INA226 @ ^0.6.4
adafruit/Adafruit INA260 Library @ ^1.5.3
adafruit/Adafruit AHTX0 @ ^2.0.5
adafruit/Adafruit BME280 Library @ ^2.3.0
adafruit/Adafruit BMP280 Library @ ^2.6.8
adafruit/Adafruit SHTC3 Library @ ^1.0.1
sensirion/Sensirion I2C SHT4x @ ^1.1.2
arduino-libraries/Arduino_LPS22HB @ ^1.0.2
adafruit/Adafruit MLX90614 Library @ ^2.1.5
adafruit/Adafruit_VL53L0X @ ^1.2.4
stevemarple/MicroNMEA @ ^2.0.6
adafruit/Adafruit BME680 Library @ ^2.0.4
adafruit/Adafruit BMP085 Library @ ^1.2.4
adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
https://github.com/Quency-D/chsc6x/archive/5cbead829d6b432a8d621ed1aafd4eb474fd4f27.zip
ESP32Async/ESPAsyncWebServer @ 3.10.3
file://arch/esp32/AsyncElegantOTA
lvgl/lvgl @ ^8.3.11
bodmer/TFT_eSPI @ ^2.5.43
densaugeo/base64 @ ~1.4.0
knolleary/PubSubClient @ ^2.8.0
; ======================================================================
; LilyGo T-Deck / T-Deck Plus — flattened equivalent of meshcomod's
; LilyGo_TDeck_companion_radio_touch. ST7789 via Adafruit (not TFT_eSPI);
; GT911 touch + matrix keyboard + trackball; sensors off except GPS.
; ======================================================================
[env:LilyGo_TDeck_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = t-deck
monitor_speed = 115200
board_build.partitions = variants/lilygo_tdeck/partitions_tdeck_touch.csv
extra_scripts = pre:scripts/inject_wifi_env.py, merge-bin.py
build_flags =
-Wno-deprecated-declarations -Wno-unused-parameter -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
-D MC_VENDORED_TOUCH_APP
-D LORA_FREQ=869.618
-D LORA_BW=62.5
-D LORA_SF=8
-D ENABLE_PRIVATE_KEY_IMPORT=1
-D ENABLE_PRIVATE_KEY_EXPORT=1
-D RADIOLIB_EXCLUDE_CC1101=1
-D RADIOLIB_EXCLUDE_RF69=1
-D RADIOLIB_EXCLUDE_SX1231=1
-D RADIOLIB_EXCLUDE_SI443X=1
-D RADIOLIB_EXCLUDE_RFM2X=1
-D RADIOLIB_EXCLUDE_SX128X=1
-D RADIOLIB_EXCLUDE_AFSK=1
-D RADIOLIB_EXCLUDE_AX25=1
-D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
-D RADIOLIB_EXCLUDE_MORSE=1
-D RADIOLIB_EXCLUDE_APRS=1
-D RADIOLIB_EXCLUDE_BELL=1
-D RADIOLIB_EXCLUDE_RTTY=1
-D RADIOLIB_EXCLUDE_SSTV=1
-D ESP32_PLATFORM
; --- T-Deck board ---
-I variants/lilygo_tdeck
-D LILYGO_TDECK
-D BOARD_HAS_PSRAM=1
; 0 = silence ARDUHAL [E] spam (benign vfs_api cache-miss "no permits for
; creation" + Preferences nvs_open NOT_FOUND on first-namespace-access) that
; also pollutes the USB-CDC companion stream. Our own Serial.printf logs stay.
-D CORE_DEBUG_LEVEL=0
-D ARDUINO_USB_CDC_ON_BOOT=1
-D PIN_USER_BTN=0
-D PIN_PERF_POWERON=10
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22
; The T-Deck's SX1262 antenna (TX/RX) switch is driven by DIO2 — this MUST be
; true. With it false, setDio2AsRfSwitch(false) leaves the switch uncontrolled,
; so on TX the +22 dBm PA is never routed to the antenna (~16 dB loss -> ~4 mW).
; That was issue #6. (Meshtastic's T-Deck + the Heltec V4 here + every other
; MeshCore SX1262 variant use true; the T-Deck was the lone outlier.)
-D SX126X_DIO2_AS_RF_SWITCH=true
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D SX126X_DIO3_TCXO_VOLTAGE=1.8f
-D P_LORA_DIO_1=45
-D P_LORA_NSS=9
-D P_LORA_RESET=17
-D P_LORA_BUSY=13
-D P_LORA_SCLK=40
-D P_LORA_MISO=38
-D P_LORA_MOSI=41
-D ENV_INCLUDE_GPS=1
-D ENV_SKIP_GPS_DETECT=1
-D ENV_INCLUDE_AHTX0=0
-D ENV_INCLUDE_BME280=0
-D ENV_INCLUDE_BMP280=0
-D ENV_INCLUDE_SHTC3=0
-D ENV_INCLUDE_SHT4X=0
-D ENV_INCLUDE_LPS22HB=0
-D ENV_INCLUDE_INA3221=0
-D ENV_INCLUDE_INA219=0
-D ENV_INCLUDE_INA226=0
-D ENV_INCLUDE_INA260=0
-D ENV_INCLUDE_MLX90614=0
-D ENV_INCLUDE_VL53L0X=0
-D ENV_INCLUDE_BME680=0
-D ENV_INCLUDE_BMP085=0
-D DISPLAY_SCALE_X=1.0
-D DISPLAY_SCALE_Y=1.0
-D PIN_TFT_RST=-1
-D PIN_TFT_VDD_CTL=-1
-D PIN_TFT_LEDA_CTL=42
-D PIN_TFT_CS=12
-D PIN_TFT_DC=11
-D PIN_TFT_SCL=40
-D PIN_TFT_SDA=41
-D PIN_GPS_RX=43
-D PIN_GPS_TX=44
-D GPS_BAUD_RATE=38400
; --- touch UI / companion stack ---
-I include
-I src
-I src/ui-touch
-D UI_LVGL=1
-D HAS_TOUCH_UI=1
-D FIRMWARE_OTA_ENV='"LilyGo_TDeck_companion_radio_touch"'
-D HAS_TDECK_GT911=1
-D HAS_TDECK_TRACKBALL=1
-D HAS_TDECK_KEYBOARD=1
-D ENABLE_ADVERT_ON_BOOT=0
-D PIN_TB_UP=15
-D PIN_TB_DOWN=3
-D PIN_TB_LEFT=2
-D PIN_TB_RIGHT=1
-D LV_CONF_PATH=lv_conf.h
-D LV_CONF_INCLUDE_SIMPLE=1
; Smoother scroll: lower deceleration than LVGL's default (10) so flicks glide
; longer instead of stopping abruptly. lv_conf leaves this unset, so this -D wins.
-D LV_INDEV_DEF_SCROLL_THROW=7
-D MAX_CONTACTS=2000
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=ST7789LCDDisplay
-D ADMIN_PASSWORD='"password"'
-D MULTI_TRANSPORT_COMPANION=1
-D WADAMESH_FORK_BUILD=1
-D TCP_PORT=5000
-D WS_PORT=8765
-D BLE_PIN_CODE=123456
-D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
-D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
-D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
build_src_filter =
+<*.cpp>
+<*.c>
+<helpers/*.cpp>
+<helpers/esp32/*.cpp>
+<helpers/input/*.cpp>
+<ui-touch/*.cpp>
+<ui-touch/*.c>
+<../variants/lilygo_tdeck/*.cpp>
lib_deps =
https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.16.5
SPI
Wire
jgromes/RadioLib @ ^7.6.0
rweather/Crypto @ ^0.4.0
adafruit/RTClib @ ^2.1.3
melopero/Melopero RV3028 @ ^1.1.0
electroniccats/CayenneLPP @ 1.6.1
h2zero/NimBLE-Arduino @ 1.4.3
adafruit/Adafruit INA3221 Library @ ^1.0.1
adafruit/Adafruit INA219 @ ^1.2.3
robtillaart/INA226 @ ^0.6.4
adafruit/Adafruit INA260 Library @ ^1.5.3
adafruit/Adafruit AHTX0 @ ^2.0.5
adafruit/Adafruit BME280 Library @ ^2.3.0
adafruit/Adafruit BMP280 Library @ ^2.6.8
adafruit/Adafruit SHTC3 Library @ ^1.0.1
sensirion/Sensirion I2C SHT4x @ ^1.1.2
arduino-libraries/Arduino_LPS22HB @ ^1.0.2
adafruit/Adafruit MLX90614 Library @ ^2.1.5
adafruit/Adafruit_VL53L0X @ ^1.2.4
stevemarple/MicroNMEA @ ^2.0.6
adafruit/Adafruit BME680 Library @ ^2.0.4
adafruit/Adafruit BMP085 Library @ ^1.2.4
adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
ESP32Async/ESPAsyncWebServer @ 3.10.3
file://arch/esp32/AsyncElegantOTA
lvgl/lvgl @ ^8.3.11
densaugeo/base64 @ ~1.4.0
knolleary/PubSubClient @ ^2.8.0
[env:tlora_pager_lr1121_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = lilygo-t-lora-pager
monitor_speed = 115200
board_build.partitions = variants/lilygo_tlora_pager/partitions_tlora_pager_touch.csv
extra_scripts = pre:scripts/inject_wifi_env.py, merge-bin.py
build_flags =
-Wno-deprecated-declarations -Wno-unused-parameter -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
-D MC_VENDORED_TOUCH_APP
-D LORA_FREQ=869.618
-D LORA_BW=62.5
-D LORA_SF=8
-D ENABLE_PRIVATE_KEY_IMPORT=1
-D ENABLE_PRIVATE_KEY_EXPORT=1
-D RADIOLIB_EXCLUDE_CC1101=1
-D RADIOLIB_EXCLUDE_RF69=1
-D RADIOLIB_EXCLUDE_SX1231=1
-D RADIOLIB_EXCLUDE_SI443X=1
-D RADIOLIB_EXCLUDE_RFM2X=1
-D RADIOLIB_EXCLUDE_SX128X=1
-D RADIOLIB_EXCLUDE_AFSK=1
-D RADIOLIB_EXCLUDE_AX25=1
-D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
-D RADIOLIB_EXCLUDE_MORSE=1
-D RADIOLIB_EXCLUDE_APRS=1
-D RADIOLIB_EXCLUDE_BELL=1
-D RADIOLIB_EXCLUDE_RTTY=1
-D RADIOLIB_EXCLUDE_SSTV=1
; LR11X0 stays IN (that's our radio family); SX126X isn't used by this env at all.
-D RADIOLIB_EXCLUDE_SX126X=1
-D ESP32_PLATFORM
; --- T-LoRa Pager board ---
-I variants/lilygo_tlora_pager
-D TLORA_PAGER=1
-D BOARD_HAS_PSRAM=1
; 0 = silence ARDUHAL [E] spam, same rationale as the other two envs.
-D CORE_DEBUG_LEVEL=0
-D ARDUINO_USB_CDC_ON_BOOT=1
-D PIN_USER_BTN=0
-D USE_LR1121=1
-D RADIO_CLASS=CustomLR1121
-D WRAPPER_CLASS=CustomLR1121Wrapper
; Full sub-GHz HP-PA power on boot, matching the T-Deck's own LORA_TX_POWER=22
; (not Heltec V4's conservative-10-then-raise-in-Settings pattern). +22dBm is
; this chip's real ceiling for freq < 1GHz -- confirmed against RadioLib's
; pinned LR1120::checkOutputPower() (LR1121 inherits it: HP PA auto-selects
; above 14dBm, valid range -9..22) and trail-mate's own
; TRAIL_MATE_LORA_TX_POWER_MAX_DBM=22 for this exact board -- not a guess
; carried over from the sibling boards. A weak default here (10dBm, ~16x less
; power) was silently degrading outbound range on real hardware: adverts/DMs
; sent FROM the pager were unreliable while inbound reception was fine, since
; the far node's own TX was unaffected.
-D LORA_TX_POWER=22
-D P_LORA_DIO_1=14
-D P_LORA_NSS=36
-D P_LORA_RESET=47
-D P_LORA_BUSY=48
-D P_LORA_SCLK=35
-D P_LORA_MISO=33
-D P_LORA_MOSI=34
-D ENV_INCLUDE_GPS=1
-D ENV_SKIP_GPS_DETECT=1
-D ENV_INCLUDE_AHTX0=0
-D ENV_INCLUDE_BME280=0
-D ENV_INCLUDE_BMP280=0
-D ENV_INCLUDE_SHTC3=0
-D ENV_INCLUDE_SHT4X=0
-D ENV_INCLUDE_LPS22HB=0
-D ENV_INCLUDE_INA3221=0
-D ENV_INCLUDE_INA219=0
-D ENV_INCLUDE_INA226=0
-D ENV_INCLUDE_INA260=0
-D ENV_INCLUDE_MLX90614=0
-D ENV_INCLUDE_VL53L0X=0
-D ENV_INCLUDE_BME680=0
-D ENV_INCLUDE_BMP085=0
-D DISPLAY_SCALE_X=1.0
-D DISPLAY_SCALE_Y=1.0
; AW9364 backlight enable/pulse pin (ST7796LCDDisplay owns brightness -- see
; the CGRAM_OFFSET comment below for why this isn't a plain PWM pin).
-D PIN_TFT_LEDA_CTL=42
; Swapped vs. trail-mate's raw GPS_RX=4/GPS_TX=12: wadamesh's core calls
; Serial1.setPins(PIN_GPS_TX, PIN_GPS_RX), and HardwareSerial::setPins()
; takes (rxPin, txPin) -- so PIN_GPS_TX must be the ESP's own RX pin (4) and
; PIN_GPS_RX the ESP's own TX pin (12). See TLORA_PAGER_PORT.md Risk 1c.
-D PIN_GPS_RX=12
-D PIN_GPS_TX=4
-D GPS_BAUD_RATE=38400
; --- touch UI / companion stack ---
-I include
-I src
-I src/ui-touch
-D UI_LVGL=1
-D HAS_TOUCH_UI=1
-D FIRMWARE_OTA_ENV='"tlora_pager_lr1121_companion_radio_touch"'
-D HAS_PAGER_KEYBOARD=1
-D HAS_PAGER_ENCODER=1
-D KB_INT=6
-D KB_BACKLIGHT=46
-D ROTARY_A=40
-D ROTARY_B=41
-D ROTARY_C=7
; ES8311 codec I2S pins (NS4150B amp downstream, enabled via XL9555
; AMP_EN -- see TLoraPagerBoard::setAmpEnabled()). Confirmed against the
; canonical arduino-esp32 pins_arduino.h for this board -- see
; TLORA_PAGER_PORT.md's Audio row.
-D PIN_I2S_MCLK=10
-D PIN_I2S_BCK=11
-D PIN_I2S_WS=18
-D PIN_I2S_DOUT=45
-D PIN_I2S_SDIN=17
-D ENABLE_ADVERT_ON_BOOT=0
-D LV_CONF_PATH=lv_conf.h
-D LV_CONF_INCLUDE_SIMPLE=1
; Smoother scroll: lower deceleration than LVGL's default (10) so flicks glide
; longer instead of stopping abruptly. lv_conf leaves this unset, so this -D wins.
-D LV_INDEV_DEF_SCROLL_THROW=7
-D MAX_CONTACTS=2000
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=ST7796LCDDisplay
-D ADMIN_PASSWORD='"password"'
-D MULTI_TRANSPORT_COMPANION=1
-D WADAMESH_FORK_BUILD=1
-D TCP_PORT=5000
-D WS_PORT=8765
-D BLE_PIN_CODE=123456
-D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
-D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
-D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
; --- ST7796 display (TFT_eSPI) ---
-D USER_SETUP_LOADED=1
-D ST7796_DRIVER=1
; REQUIRED: this panel's 222px glass is narrower than the ST7796 controller's
; 320px GRAM. TFT_eSPI's ST7796_Rotation.h only applies the needed 49px
; column/row offset when this is defined (unlike ST7789, it isn't automatic
; for ST7796) -- ST7796LCDDisplay.cpp #errors at compile time without it.
-D CGRAM_OFFSET=1
; REQUIRED on ESP32-S3: TFT_eSPI_ESP32_S3.h's raw register macros (_spi_user,
; _spi_cmd, _spi_mosi_dlen -- used by begin_tft_write()/TFT_WRITE_BITS) take
; SPI_PORT and feed it straight into IDF's SPI_USER_REG(i)/REG_SPI_BASE(i),
; which only resolves to a real peripheral for i>=2 (SPI2/SPI3); i<2 returns
; base address 0. Leaving both USE_HSPI_PORT/USE_FSPI_PORT undefined makes
; that file fall back to SPI_PORT=FSPI, but FSPI is the *Arduino* enum value
; (0 on S3) rather than the raw IDF host index TFT_eSPI's own macros need --
; so _spi_user resolves to address 0x10, and the very first writecommand()
; in ST7796LCDDisplay::begin()/TFT_eSPI::init() hard-crashes with a
; StoreProhibited panic (confirmed on hardware: black screen, boot-looping
; "Guru Meditation Error" at TFT_eSPI::begin_tft_write()). USE_FSPI_PORT
; forces SPI_PORT=2 (real SPI2/"GPSPI2") consistently across both the raw
; macros and the SPIClass(FSPI) object TFT_eSPI constructs internally.
; USE_HSPI_PORT (real SPI3) is deliberately NOT used here instead: the
; radio's own `SPIClass spi` (variants/lilygo_tlora_pager/target.cpp) takes
; its default ctor arg (HSPI), which the Arduino core also maps to real
; SPI3 -- so picking HSPI for the display would put both peripherals on the
; same physical SPI host and conflict.
-D USE_FSPI_PORT=1
-D TFT_WIDTH=222
-D TFT_HEIGHT=480
-D TFT_MOSI=34
-D TFT_SCLK=35
-D TFT_CS=38
-D TFT_DC=37
-D TFT_RST=-1
-D TFT_MISO=33
-D TFT_BL=-1
; trail-mate's kPagerDisplaySpiClockMhz = 80.
-D SPI_FREQUENCY=80000000
build_src_filter =
+<*.cpp>
+<*.c>
+<helpers/*.cpp>
+<helpers/esp32/*.cpp>
+<helpers/input/*.cpp>
+<helpers/ui/*.cpp>
+<ui-touch/*.cpp>
+<ui-touch/*.c>
+<../variants/lilygo_tlora_pager/*.cpp>
lib_deps =
https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.16.5
SPI
Wire
jgromes/RadioLib @ ^7.6.0
rweather/Crypto @ ^0.4.0
adafruit/RTClib @ ^2.1.3
melopero/Melopero RV3028 @ ^1.1.0
electroniccats/CayenneLPP @ 1.6.1
h2zero/NimBLE-Arduino @ 1.4.3
adafruit/Adafruit INA3221 Library @ ^1.0.1
adafruit/Adafruit INA219 @ ^1.2.3
robtillaart/INA226 @ ^0.6.4
adafruit/Adafruit INA260 Library @ ^1.5.3
adafruit/Adafruit AHTX0 @ ^2.0.5
adafruit/Adafruit BME280 Library @ ^2.3.0
adafruit/Adafruit BMP280 Library @ ^2.6.8
adafruit/Adafruit SHTC3 Library @ ^1.0.1
sensirion/Sensirion I2C SHT4x @ ^1.1.2
arduino-libraries/Arduino_LPS22HB @ ^1.0.2
adafruit/Adafruit MLX90614 Library @ ^2.1.5
adafruit/Adafruit_VL53L0X @ ^1.2.4
stevemarple/MicroNMEA @ ^2.0.6
adafruit/Adafruit BME680 Library @ ^2.0.4
adafruit/Adafruit BMP085 Library @ ^1.2.4
ESP32Async/ESPAsyncWebServer @ 3.10.3
file://arch/esp32/AsyncElegantOTA
lvgl/lvgl @ ^8.3.11
densaugeo/base64 @ ~1.4.0
knolleary/PubSubClient @ ^2.8.0
bodmer/TFT_eSPI @ ^2.5.43
adafruit/Adafruit TCA8418 @ ^1.0.2
lewisxhe/SensorLib @ 0.3.3
; Milestone 10: SX1262-variant env for pager units sold with that radio instead
; of LR1121 -- same board JSON, same variant dir, same physical NSS/RESET/BUSY/
; DIO1/SCLK/MISO/MOSI pins (same PCB slot, just a different chip populated —
; see TLORA_PAGER_PORT.md's hardware-facts table). RADIO_CLASS/WRAPPER_CLASS
; swap to the core fork's CustomSX1262/CustomSX1262Wrapper, the exact same
; generic classes the T-Deck already uses -- see target.cpp's radio_init()
; for why no new radio C++ code was needed, just these build flags.
[env:tlora_pager_sx1262_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = lilygo-t-lora-pager
monitor_speed = 115200
board_build.partitions = variants/lilygo_tlora_pager/partitions_tlora_pager_touch.csv
extra_scripts = pre:scripts/inject_wifi_env.py, merge-bin.py
build_flags =
-Wno-deprecated-declarations -Wno-unused-parameter -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
-D MC_VENDORED_TOUCH_APP
-D LORA_FREQ=869.618
-D LORA_BW=62.5
-D LORA_SF=8
-D ENABLE_PRIVATE_KEY_IMPORT=1
-D ENABLE_PRIVATE_KEY_EXPORT=1
-D RADIOLIB_EXCLUDE_CC1101=1
-D RADIOLIB_EXCLUDE_RF69=1
-D RADIOLIB_EXCLUDE_SX1231=1
-D RADIOLIB_EXCLUDE_SI443X=1
-D RADIOLIB_EXCLUDE_RFM2X=1
-D RADIOLIB_EXCLUDE_SX128X=1
-D RADIOLIB_EXCLUDE_AFSK=1
-D RADIOLIB_EXCLUDE_AX25=1
-D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
-D RADIOLIB_EXCLUDE_MORSE=1
-D RADIOLIB_EXCLUDE_APRS=1
-D RADIOLIB_EXCLUDE_BELL=1
-D RADIOLIB_EXCLUDE_RTTY=1
-D RADIOLIB_EXCLUDE_SSTV=1
; SX126X stays IN (that's this env's radio family); LR11X0 isn't used at all.
-D RADIOLIB_EXCLUDE_LR11X0=1
-D ESP32_PLATFORM
; --- T-LoRa Pager board (SX1262 variant) ---
-I variants/lilygo_tlora_pager
-D TLORA_PAGER=1
-D BOARD_HAS_PSRAM=1
; 0 = silence ARDUHAL [E] spam, same rationale as the other envs.
-D CORE_DEBUG_LEVEL=0
-D ARDUINO_USB_CDC_ON_BOOT=1
-D PIN_USER_BTN=0
-D USE_SX1262=1
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
; Same 22dBm ceiling as the LR1121 env -- trail-mate's own reference for this
; exact board (~/dev/trail-mate/boards/tlora_pager) uses the identical
; TRAIL_MATE_LORA_TX_POWER_MAX_DBM=22 for BOTH its LR1121 and SX1262 envs, and
; it's this chip's well-known real ceiling too.
-D LORA_TX_POWER=22
; SX126X_DIO2_AS_RF_SWITCH=true and SX126X_CURRENT_LIMIT=140 are carried over
; from the T-Deck's own SX1262 config -- NOT because this is the T-Deck, but
; because both are tied to the 22dBm target above, not to board-specific analog
; circuitry: RadioLib's own SX126x.cpp already defaults DIO2-as-switch to true
; internally (same value, just made explicit here), and its default current
; limit (60mA) is what silently capped the T-Deck's real TX power below its
; target before that env raised it to 140mA -- the same physics apply to any
; SX1262 module asked to reach 22dBm, not something unique to the T-Deck's PCB.
-D SX126X_DIO2_AS_RF_SWITCH=true
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
; Deliberately NOT setting SX126X_DIO3_TCXO_VOLTAGE (unlike the T-Deck's
; 1.8f) -- that IS a board-specific analog value (this board's actual TCXO
; circuit), and trail-mate's own working reference for this exact PCB never
; overrides it either, relying on CustomSX1262::std_init()'s built-in 1.6V
; fallback (RadioLib's own SX1262::begin() default) -- which also already
; auto-retries at 0.0f on an SPI-cmd failure if 1.6V doesn't suit this board's
; real hardware. Revisit with a measured value if bring-up shows otherwise.
-D P_LORA_DIO_1=14
-D P_LORA_NSS=36
-D P_LORA_RESET=47
-D P_LORA_BUSY=48
-D P_LORA_SCLK=35
-D P_LORA_MISO=33
-D P_LORA_MOSI=34
-D ENV_INCLUDE_GPS=1
-D ENV_SKIP_GPS_DETECT=1
-D ENV_INCLUDE_AHTX0=0
-D ENV_INCLUDE_BME280=0
-D ENV_INCLUDE_BMP280=0
-D ENV_INCLUDE_SHTC3=0
-D ENV_INCLUDE_SHT4X=0
-D ENV_INCLUDE_LPS22HB=0
-D ENV_INCLUDE_INA3221=0
-D ENV_INCLUDE_INA219=0
-D ENV_INCLUDE_INA226=0
-D ENV_INCLUDE_INA260=0
-D ENV_INCLUDE_MLX90614=0
-D ENV_INCLUDE_VL53L0X=0
-D ENV_INCLUDE_BME680=0
-D ENV_INCLUDE_BMP085=0
-D DISPLAY_SCALE_X=1.0
-D DISPLAY_SCALE_Y=1.0
; AW9364 backlight enable/pulse pin (ST7796LCDDisplay owns brightness -- see
; the CGRAM_OFFSET comment below for why this isn't a plain PWM pin).
-D PIN_TFT_LEDA_CTL=42
; Swapped vs. trail-mate's raw GPS_RX=4/GPS_TX=12: wadamesh's core calls
; Serial1.setPins(PIN_GPS_TX, PIN_GPS_RX), and HardwareSerial::setPins()
; takes (rxPin, txPin) -- so PIN_GPS_TX must be the ESP's own RX pin (4) and
; PIN_GPS_RX the ESP's own TX pin (12). See TLORA_PAGER_PORT.md Risk 1c.
-D PIN_GPS_RX=12
-D PIN_GPS_TX=4
-D GPS_BAUD_RATE=38400
; --- touch UI / companion stack ---
-I include
-I src
-I src/ui-touch
-D UI_LVGL=1
-D HAS_TOUCH_UI=1
-D FIRMWARE_OTA_ENV='"tlora_pager_sx1262_companion_radio_touch"'
-D HAS_PAGER_KEYBOARD=1
-D HAS_PAGER_ENCODER=1
-D KB_INT=6
-D KB_BACKLIGHT=46
-D ROTARY_A=40
-D ROTARY_B=41
-D ROTARY_C=7
; ES8311 codec I2S pins (NS4150B amp downstream, enabled via XL9555
; AMP_EN -- see TLoraPagerBoard::setAmpEnabled()). Confirmed against the
; canonical arduino-esp32 pins_arduino.h for this board -- see
; TLORA_PAGER_PORT.md's Audio row.
-D PIN_I2S_MCLK=10
-D PIN_I2S_BCK=11
-D PIN_I2S_WS=18
-D PIN_I2S_DOUT=45
-D PIN_I2S_SDIN=17
-D ENABLE_ADVERT_ON_BOOT=0
-D LV_CONF_PATH=lv_conf.h
-D LV_CONF_INCLUDE_SIMPLE=1
; Smoother scroll: lower deceleration than LVGL's default (10) so flicks glide
; longer instead of stopping abruptly. lv_conf leaves this unset, so this -D wins.
-D LV_INDEV_DEF_SCROLL_THROW=7
-D MAX_CONTACTS=2000
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=ST7796LCDDisplay
-D ADMIN_PASSWORD='"password"'
-D MULTI_TRANSPORT_COMPANION=1
-D WADAMESH_FORK_BUILD=1
-D TCP_PORT=5000
-D WS_PORT=8765
-D BLE_PIN_CODE=123456
-D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
-D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
-D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
; --- ST7796 display (TFT_eSPI) ---
-D USER_SETUP_LOADED=1
-D ST7796_DRIVER=1
; REQUIRED: this panel's 222px glass is narrower than the ST7796 controller's
; 320px GRAM. TFT_eSPI's ST7796_Rotation.h only applies the needed 49px
; column/row offset when this is defined (unlike ST7789, it isn't automatic
; for ST7796) -- ST7796LCDDisplay.cpp #errors at compile time without it.
-D CGRAM_OFFSET=1
; REQUIRED on ESP32-S3: see the LR1121 env's identical comment above --
; same display, same panel, same constraint, unrelated to the radio chip.
-D USE_FSPI_PORT=1
-D TFT_WIDTH=222
-D TFT_HEIGHT=480
-D TFT_MOSI=34
-D TFT_SCLK=35
-D TFT_CS=38
-D TFT_DC=37
-D TFT_RST=-1
-D TFT_MISO=33
-D TFT_BL=-1
; trail-mate's kPagerDisplaySpiClockMhz = 80.
-D SPI_FREQUENCY=80000000
build_src_filter =
+<*.cpp>
+<*.c>
+<helpers/*.cpp>
+<helpers/esp32/*.cpp>
+<helpers/input/*.cpp>
+<helpers/ui/*.cpp>
+<ui-touch/*.cpp>
+<ui-touch/*.c>
+<../variants/lilygo_tlora_pager/*.cpp>
lib_deps =
https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.16.5
SPI
Wire
jgromes/RadioLib @ ^7.6.0
rweather/Crypto @ ^0.4.0
adafruit/RTClib @ ^2.1.3
melopero/Melopero RV3028 @ ^1.1.0
electroniccats/CayenneLPP @ 1.6.1
h2zero/NimBLE-Arduino @ 1.4.3
adafruit/Adafruit INA3221 Library @ ^1.0.1
adafruit/Adafruit INA219 @ ^1.2.3
robtillaart/INA226 @ ^0.6.4
adafruit/Adafruit INA260 Library @ ^1.5.3
adafruit/Adafruit AHTX0 @ ^2.0.5
adafruit/Adafruit BME280 Library @ ^2.3.0
adafruit/Adafruit BMP280 Library @ ^2.6.8
adafruit/Adafruit SHTC3 Library @ ^1.0.1
sensirion/Sensirion I2C SHT4x @ ^1.1.2
arduino-libraries/Arduino_LPS22HB @ ^1.0.2
adafruit/Adafruit MLX90614 Library @ ^2.1.5
adafruit/Adafruit_VL53L0X @ ^1.2.4
stevemarple/MicroNMEA @ ^2.0.6
adafruit/Adafruit BME680 Library @ ^2.0.4
adafruit/Adafruit BMP085 Library @ ^1.2.4
ESP32Async/ESPAsyncWebServer @ 3.10.3
file://arch/esp32/AsyncElegantOTA
lvgl/lvgl @ ^8.3.11
densaugeo/base64 @ ~1.4.0
knolleary/PubSubClient @ ^2.8.0
bodmer/TFT_eSPI @ ^2.5.43
adafruit/Adafruit TCA8418 @ ^1.0.2
lewisxhe/SensorLib @ 0.3.3
[env:ThinkNode_M9_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = thinknode_m9
monitor_speed = 115200
board_build.partitions = variants/thinknode_m9/partitions_m9_touch.csv
; patch_radiolib_lr11x0: preprod M9 LR1110s run old transceiver FW that rejects
; DriveDiosInSleepMode (0x012A, FW 0x0308+) with CMD_PERR -> begin() = -706.
; The pre-script makes RadioLib's config() skip it on old FW (idempotent,
; per-env libdeps copy). See scripts/build/patch_radiolib_lr11x0.py.
extra_scripts = pre:scripts/inject_wifi_env.py, pre:scripts/build/patch_radiolib_lr11x0.py, merge-bin.py
build_flags =
-Wno-deprecated-declarations -Wno-unused-parameter -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
-D MC_VENDORED_TOUCH_APP
-D LORA_FREQ=869.618
-D LORA_BW=62.5
-D LORA_SF=8
-D ENABLE_PRIVATE_KEY_IMPORT=1
-D ENABLE_PRIVATE_KEY_EXPORT=1
-D RADIOLIB_EXCLUDE_CC1101=1
-D RADIOLIB_EXCLUDE_RF69=1
-D RADIOLIB_EXCLUDE_SX1231=1
-D RADIOLIB_EXCLUDE_SI443X=1
-D RADIOLIB_EXCLUDE_RFM2X=1
-D RADIOLIB_EXCLUDE_SX128X=1
-D RADIOLIB_EXCLUDE_AFSK=1
-D RADIOLIB_EXCLUDE_AX25=1
-D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
-D RADIOLIB_EXCLUDE_MORSE=1
-D RADIOLIB_EXCLUDE_APRS=1
-D RADIOLIB_EXCLUDE_BELL=1
-D RADIOLIB_EXCLUDE_RTTY=1
-D RADIOLIB_EXCLUDE_SSTV=1
-D ESP32_PLATFORM
; --- ThinkNode M9 board ---
-I variants/thinknode_m9
-D HAS_THINKNODE_M9
-D BOARD_HAS_PSRAM=1
; M9 uses the UART bridge (ttyUSB0), not native USB-CDC — confirmed during
; Specter bring-up. With ARDUINO_USB_CDC_ON_BOOT=1 (the T-Deck's setting)
; app Serial logs go to a ttyACM* port this board doesn't expose and
; appear completely silent.
-D ARDUINO_USB_CDC_ON_BOOT=0
-D PIN_USER_BTN=0
-D RADIO_CLASS=CustomLR1110
-D WRAPPER_CLASS=CustomLR1110Wrapper
-D LORA_TX_POWER=22
; LR1110 clock: TCXO mode at 3.3 V — EMPIRICALLY CONFIRMED on the tester's
; preproduction unit: Meshtastic's thinknode_m9 variant logs "using DIO3 as
; TCXO reference voltage at 3.300000 V" followed by "LR1110 init result 0".
; The earlier theory here (Y1 = self-powered active oscillator -> tcxo must
; be 0) was disproven on hardware: with 0 the chip boots on its internal RC
; (SPI alive, no -2) but the first command needing the real 32 MHz clock is
; rejected -> radio init failed -707 (bring-up build #1, 2026-07-06). The
; schematic's "VTCXO rail" feeding Y1 is evidently the LR1110's own
; TCXO-supply output, so the chip must drive it.
-D LR11X0_DIO3_TCXO_VOLTAGE=3.3
; Bring-up only: RadioLib's own boot prints (found-chip line with the
; transceiver/WiFi/GNSS FW versions, calibration errors). Goes to Serial =
; UART0 on this board. Low volume; drop once the radio is proven.
-D RADIOLIB_DEBUG_BASIC=1
-D RX_BOOSTED_GAIN=true
; DIO5/DIO6 -> RFSW0_V1/RFSW1_V2 confirmed against the V1.0 schematic (LR1110
; block, U7 pins 19/20 -> R19/R20 -> U8 V1/V2) — see target.cpp for the table
; and M9_PORT.md for the crop. The per-mode polarity is the conventional
; 2-pin table every other MeshCore LR1110 board uses, not independently
; re-derived from U8's datasheet (part number isn't printed on the schematic).
-D RF_SWITCH_TABLE
; --- LR1110 SPI / control pins (verified: V1.0 schematic + boot log) ---
-D P_LORA_NSS=39
-D P_LORA_DIO_1=42
-D P_LORA_RESET=45
-D P_LORA_BUSY=41
-D P_LORA_SCLK=40
-D P_LORA_MISO=38
-D P_LORA_MOSI=47
; --- Peripheral I2C bus 0 (Wire): RTC PCF8563 0x51 / IMU QMI8658 0x6b /
; compass QMC6309 0x7c. Brought up by ESP32Board::begin(). ---
-D PIN_BOARD_SDA=7
-D PIN_BOARD_SCL=6
-D PIN_VBAT_READ=13
; --- GPS (CC1167Q, UART1) ---
-D ENV_INCLUDE_GPS=1
-D PIN_GPS_RX=3
-D PIN_GPS_TX=2
-D PIN_GPS_EN=11
-D PIN_GPS_RESET=5
-D PIN_GPS_RESET_ACTIVE=HIGH
; GPS_RST1 -> R46 -> NPN Q16 base: GPIO HIGH turns Q16 on, pulling the module's
; reset pin to GND — so HIGH asserts reset, LOW releases it (inverted vs. library default)
-D PIN_GPS_EN_ACTIVE=LOW
; GPIO10 (GPS ON_OFF) and GPIO4 (1PPS) exist on the schematic but have no
; consumer in this driver yet — reserved, not wired.
-D GPS_BAUD_RATE=115200
-D THINKNODE_M9_BUZZER_PIN=9
-D ENV_INCLUDE_AHTX0=0
-D ENV_INCLUDE_BME280=0
-D ENV_INCLUDE_BMP280=0
-D ENV_INCLUDE_SHTC3=0
-D ENV_INCLUDE_SHT4X=0
-D ENV_INCLUDE_LPS22HB=0
-D ENV_INCLUDE_INA3221=0
-D ENV_INCLUDE_INA219=0
-D ENV_INCLUDE_INA226=0
-D ENV_INCLUDE_INA260=0
-D ENV_INCLUDE_MLX90614=0
-D ENV_INCLUDE_VL53L0X=0
-D ENV_INCLUDE_BME680=0
-D ENV_INCLUDE_BMP085=0
; --- ST7789 panel (manufacturer-confirmed; NOT ILI9341) ---
; No LILYGO_TDECK / HELTEC_LORA_V4_TFT macro is defined, so ST7789LCDDisplay
; uses its default branch (Adafruit_ST7789 over the global `SPI`, the same
; instance the radio uses) — matches the LR1110 reference variants, which
; also share one SPI peripheral across radio + display + (on the M9) SD.
-D DISPLAY_SCALE_X=1.0
-D DISPLAY_SCALE_Y=1.0
; HARDWARE-VERIFIED (bring-up #6, 2026-07-06): rotation 3 rendered the UI
; 180 degrees off on the tester's unit; 1 is the correct landscape
; orientation (keyboard below screen). Adafruit rotations 1/3 are the two
; landscape options, 180 degrees apart.
-D DISPLAY_ROTATION=1
; PIN_TFT_LEDA_CTL is set to -1, NOT left undefined: the installed ST7789LCDDisplay
; references it unconditionally (`if (PIN_TFT_LEDA_CTL != -1)`, no #ifdef guard around
; the macro itself — leaving it undefined is a compile error, not a no-op). -1 makes
; that check skip the pin entirely, since the vendored class always drives it
; active-HIGH, but the M9's backlight is a PNP transistor (active-LOW) — so
; ThinkNodeM9Board owns BL_EN (GPIO17) directly instead (see M9Board.h/.cpp).
; PIN_PERIPH_POWER is the OTHER (also active-low) rail, gating the LCD/GPS/sensors,
; and IS passed through ST7789LCDDisplay's RefCountedDigitalPin constructor arg in
; target.cpp.
-D PIN_TFT_LEDA_CTL=-1
-D PIN_PERIPH_POWER=18
-D PIN_TFT_BL_EN=17
-D PIN_TFT_RST=14
-D PIN_TFT_DC=15
-D PIN_TFT_CS=16
; PIN_TFT_SCL / PIN_TFT_SDA intentionally NOT defined: only the
; USE_PIN_TFT / LILYGO_TDECK / HELTEC_LORA_V4_TFT branches of
; ST7789LCDDisplay's constructor consume them, and M9 uses none of those —
; it takes the default `display(&SPI, PIN_TFT_CS, PIN_TFT_DC, PIN_TFT_RST)`
; branch (global SPI, same instance the radio uses).
;
; NOTE: a software-SPI (USE_PIN_TFT) diagnostic build was tried here to test
; whether the class's hardcoded 80MHz hardware SPI clock was corrupting the
; boot-splash write. It wasn't — software SPI reproduced the EXACT same
; freeze-then-TG1WDT_SYS_RST at the exact same point, just slower, which
; rules out the SPI clock/signal-integrity theory entirely. See
; M9_PORT.md / git history if revisiting that path.
; microSD: on the shared LoRa SPI bus, same as T-Deck. CS is GPIO48 — the
; schematic net SPICLK_N, which is NOT one of the GPIO33-37 octal-PSRAM
; lines: SPICLK_N/GPIO48 (and SPICLK_P/GPIO47) are only reserved on the
; R8V/R16V 1.8V-differential-clock variants. This board is a plain R8 (see
; the env comment above), which uses the ordinary single-ended SPICLK
; instead, so GPIO48 is genuinely free. Confirmed via schematic: GPS_RST1
; and this net were the ones directly identified, not inferred.
-D PIN_SD_CS=48
-D HAS_M9_KEYBOARD=1
; Keyboard bus SCHEMATIC-VERIFIED (V1.0 sheet, bring-up #9): S3 GPIO20 =
; net ESP32-2_SDA, GPIO21 = ESP32-2_SCL, to the keyboard ESP32-S2 (its
; GPIO7/6) through R2/R1 series resistors, pullups R73/R72, S2 powered from
; always-on 3V3 via R3. GPIO19/20 are also the S3's native USB D-/D+ pads —
; M9Board::begin() must release the USB-Serial-JTAG pad claim first.
-D PIN_KB_SDA=20
-D PIN_KB_SCL=21
-D PIN_KB_ADDR=0x6c
; --- touch UI / companion stack (M9 has no touch — keyboard + d-pad text
; entry only; keypad-nav focus traversal is NOT wired yet, see
; M9_PORT.md) ---
-I include
-I src
-I src/ui-touch
-D UI_LVGL=1
-D HAS_TOUCH_UI=1
-D FIRMWARE_OTA_ENV='"ThinkNode_M9_companion_radio_touch"'
-D ENABLE_ADVERT_ON_BOOT=0
-D LV_CONF_PATH=lv_conf.h
-D LV_CONF_INCLUDE_SIMPLE=1
-D LV_INDEV_DEF_SCROLL_THROW=7
-D MAX_CONTACTS=2000
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=ST7789LCDDisplay
-D ADMIN_PASSWORD='"password"'
-D MULTI_TRANSPORT_COMPANION=1
-D WADAMESH_FORK_BUILD=1
-D TCP_PORT=5000
-D WS_PORT=8765
-D BLE_PIN_CODE=123456
-D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
-D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
-D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
build_src_filter =
+<*.cpp>
+<*.c>
+<helpers/*.cpp>
+<helpers/esp32/*.cpp>
+<helpers/input/*.cpp>
+<ui-touch/*.cpp>
+<ui-touch/*.c>
+<../variants/thinknode_m9/*.cpp>
lib_deps =
https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.16.5
SPI
Wire
jgromes/RadioLib @ ^7.6.0
rweather/Crypto @ ^0.4.0
adafruit/RTClib @ ^2.1.3
melopero/Melopero RV3028 @ ^1.1.0
electroniccats/CayenneLPP @ 1.6.1
h2zero/NimBLE-Arduino @ 1.4.3
adafruit/Adafruit INA3221 Library @ ^1.0.1
adafruit/Adafruit INA219 @ ^1.2.3
robtillaart/INA226 @ ^0.6.4
adafruit/Adafruit INA260 Library @ ^1.5.3
adafruit/Adafruit AHTX0 @ ^2.0.5
adafruit/Adafruit BME280 Library @ ^2.3.0
adafruit/Adafruit BMP280 Library @ ^2.6.8
adafruit/Adafruit SHTC3 Library @ ^1.0.1
sensirion/Sensirion I2C SHT4x @ ^1.1.2
arduino-libraries/Arduino_LPS22HB @ ^1.0.2
adafruit/Adafruit MLX90614 Library @ ^2.1.5
adafruit/Adafruit_VL53L0X @ ^1.2.4
stevemarple/MicroNMEA @ ^2.0.6
adafruit/Adafruit BME680 Library @ ^2.0.4
adafruit/Adafruit BMP085 Library @ ^1.2.4
adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
ESP32Async/ESPAsyncWebServer @ 3.10.3
file://arch/esp32/AsyncElegantOTA
lvgl/lvgl @ ^8.3.11
densaugeo/base64 @ ~1.4.0
knolleary/PubSubClient @ ^2.8.0
; ======================================================================
; RAK WisMesh Tap V2 — ST7789 TFT + FT5x06 capacitive touch + SX1262.
; RAK3312 module (ESP32-S3, 16 MB Flash DIO, 8 MB Octal PSRAM).
; ======================================================================
[env:rak_tap_v2_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = rak_tap_v2
monitor_speed = 115200
board_build.flash_mode = dio ; RAK3312 requires DIO (board JSON defaults to qio)
board_build.partitions = variants/rak_tap_v2/partitions_rak_tap_v2_touch.csv
extra_scripts = pre:scripts/inject_wifi_env.py, merge-bin.py
; Round-1b USB: MODE=1 HW CDC (single COM7). No 1200bps touch — use DTR/RTS reset.
build_unflags =
-D ARDUINO_USB_MODE=0
upload_speed = 460800
upload_flags =
--before=default_reset
--after=hard_reset
build_flags =
-Wno-deprecated-declarations -Wno-unused-parameter -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
-D MC_VENDORED_TOUCH_APP
-D LORA_FREQ=869.618
-D LORA_BW=62.5
-D LORA_SF=8
-D ENABLE_PRIVATE_KEY_IMPORT=1
-D ENABLE_PRIVATE_KEY_EXPORT=1
-D RADIOLIB_EXCLUDE_CC1101=1
-D RADIOLIB_EXCLUDE_RF69=1
-D RADIOLIB_EXCLUDE_SX1231=1
-D RADIOLIB_EXCLUDE_SI443X=1
-D RADIOLIB_EXCLUDE_RFM2X=1
-D RADIOLIB_EXCLUDE_SX128X=1
-D RADIOLIB_EXCLUDE_AFSK=1
-D RADIOLIB_EXCLUDE_AX25=1
-D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
-D RADIOLIB_EXCLUDE_MORSE=1
-D RADIOLIB_EXCLUDE_APRS=1
-D RADIOLIB_EXCLUDE_BELL=1
-D RADIOLIB_EXCLUDE_RTTY=1
-D RADIOLIB_EXCLUDE_SSTV=1
-D ESP32_PLATFORM
; --- sensors (GPS + AHTx0 + BME680 enabled) ---
-D ENV_INCLUDE_GPS=1
-D ENV_INCLUDE_AHTX0=1
-D ENV_INCLUDE_BME280=0
-D ENV_INCLUDE_BMP280=0
-D ENV_INCLUDE_SHTC3=0
-D ENV_INCLUDE_SHT4X=0
-D ENV_INCLUDE_LPS22HB=0
-D ENV_INCLUDE_INA3221=0
-D ENV_INCLUDE_INA219=0
-D ENV_INCLUDE_INA226=0
-D ENV_INCLUDE_INA260=0
-D ENV_INCLUDE_MLX90614=0
-D ENV_INCLUDE_VL53L0X=0
-D ENV_INCLUDE_BME680=1
-D ENV_INCLUDE_BMP085=0
; --- LoRa SX1262 (RAK3312 module, same pins as RAK3112) ---
-I variants/rak_tap_v2
-D RAK_WISMESH_TAP_V2=1
-D USE_SX1262
-D ESP32_CPU_FREQ=240
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22
-D P_LORA_TX_LED=46
-D P_LORA_DIO_1=47
-D P_LORA_NSS=7
-D P_LORA_RESET=8
-D P_LORA_BUSY=48
-D P_LORA_SCLK=5
-D P_LORA_MISO=3
-D P_LORA_MOSI=6
-D SX126X_DIO2_AS_RF_SWITCH=true
-D SX126X_DIO3_TCXO_VOLTAGE=1.8
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D PIN_GPS_RX=43
-D PIN_GPS_TX=44
-D PIN_USER_BTN=0
-D PIN_VEXT_EN=14
-D PIN_BOARD_SDA=9
-D PIN_BOARD_SCL=40
; --- TFT (ST7789 240x320, LovyanGFX hardware SPI on FSPI/SPI2_HOST SCL=13/SDA=11) ---
; USB: ARDUINO_USB_* from boards/rak_tap_v2.json (MODE=1 HW CDC, Meshtastic-aligned)
-D DISPLAY_CLASS=LGFXDisplay
-D LGFX_INVERT_COLOR=true ; false=white bg, true=black bg (ST7789 INVON)
-D DISPLAY_ROTATION=3
-D DISPLAY_SCALE_X=1.0
-D DISPLAY_SCALE_Y=1.0
-D PIN_TFT_RST=-1
-D PIN_TFT_LEDA_CTL=41
-D PIN_TFT_LEDA_CTL_ACTIVE=HIGH
-D PIN_TFT_CS=12
-D PIN_TFT_DC=42
-D PIN_TFT_SCL=13
-D PIN_TFT_SDA=11
; --- FT5x06 capacitive touch (I2C0 addr 0x38, SDA=9/SCL=40) ---
-D HAS_RAK_TAP_V2=1
-D RAK_TS_FLIP_X=1
-D RAK_TS_FLIP_Y=1
-D PIN_TOUCH_SDA=9
-D PIN_TOUCH_SCL=40
-D PIN_TOUCH_INT=39
; --- touch UI / companion stack ---
-I include
-I src
-I src/ui-touch
-D UI_LVGL=1
-D HAS_TOUCH_UI=1
-D FIRMWARE_OTA_ENV='"rak_tap_v2_companion_radio_touch"'
-D ENABLE_ADVERT_ON_BOOT=0
-D LV_CONF_PATH=lv_conf.h
-D LV_CONF_INCLUDE_SIMPLE=1
-D LV_INDEV_DEF_SCROLL_THROW=7
-D USER_SETUP_LOADED=1
-D ST7789_DRIVER=1
-D TFT_WIDTH=320
-D TFT_HEIGHT=240
-D TFT_MOSI=11
-D TFT_SCLK=13
-D TFT_CS=12
-D TFT_DC=42
-D TFT_RST=-1
-D TFT_MISO=-1
-D SPI_FREQUENCY=40000000
-D TFT_RGB_ORDER=TFT_RGB
-D TFT_INVERSION_ON=1
-D TFT_BL=41
-D TFT_BACKLIGHT_ON=1
-D MAX_CONTACTS=2000
-D MAX_GROUP_CHANNELS=40
-D ADMIN_PASSWORD='"password"'
-D MULTI_TRANSPORT_COMPANION=1
-D WADAMESH_FORK_BUILD=1
-D TCP_PORT=5000
-D WS_PORT=8765
-D BLE_PIN_CODE=123456
-D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
-D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
-D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
build_src_filter =
+<*.cpp>
+<helpers/*.cpp>
+<helpers/esp32/*.cpp>
+<helpers/input/*.cpp>
+<ui-touch/*.cpp>
+<ui-touch/*.c>
+<../variants/rak_tap_v2/*.cpp>
lib_deps =
https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.16.5
SPI
Wire
jgromes/RadioLib @ ^7.6.0
rweather/Crypto @ ^0.4.0
adafruit/RTClib @ ^2.1.3
melopero/Melopero RV3028 @ ^1.1.0
electroniccats/CayenneLPP @ 1.6.1
h2zero/NimBLE-Arduino @ 1.4.3
adafruit/Adafruit INA3221 Library @ ^1.0.1
adafruit/Adafruit INA219 @ ^1.2.3
robtillaart/INA226 @ ^0.6.4
adafruit/Adafruit INA260 Library @ ^1.5.3
adafruit/Adafruit AHTX0 @ ^2.0.5
adafruit/Adafruit BME280 Library @ ^2.3.0
adafruit/Adafruit BMP280 Library @ ^2.6.8
adafruit/Adafruit SHTC3 Library @ ^1.0.1
sensirion/Sensirion I2C SHT4x @ ^1.1.2
arduino-libraries/Arduino_LPS22HB @ ^1.0.2
adafruit/Adafruit MLX90614 Library @ ^2.1.5
adafruit/Adafruit_VL53L0X @ ^1.2.4
stevemarple/MicroNMEA @ ^2.0.6
adafruit/Adafruit BME680 Library @ ^2.0.4
adafruit/Adafruit BMP085 Library @ ^1.2.4
adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
ESP32Async/ESPAsyncWebServer @ 3.10.3
file://arch/esp32/AsyncElegantOTA
lvgl/lvgl @ ^8.3.11
lovyan03/LovyanGFX@1.2.21
bodmer/TFT_eSPI @ ^2.5.43
densaugeo/base64 @ ~1.4.0
knolleary/PubSubClient @ ^2.8.0
Reference in new issue View Git Blame Copy Permalink