shade/wadamesh
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 1 Wiki Activity
Files
main
wadamesh/platformio.ini
T
Confituurke c2d50b5430 feat(sensecap-indicator): ST7701S RGB panel on LovyanGFX 
IndicatorDisplay drives the 480x480 ST7701S through LovyanGFX's Bus_RGB
and Panel_ST7701 on the stock core; the CrowPanel 5.0 drives its RGB
panel through the same Bus_RGB. The panel's CS and RESET sit on the TCA9535, so LovyanGFX
gets pin_cs/pin_rst = -1 and begin() drives them through IndicatorIo:
reset pulse, CS low, lcd.init(), CS high. The bus lock is held from CS
low to CS high because the panel's 3-wire init shares GPIO41/48 with
the radio SPI, and no other task may move the radio's NSS meanwhile.

The second init list is Meshtastic device-ui's Indicator list (GPL-3.0,
credited in NOTICE): MADCTL 0x10 and SDIR 0x04 in BK0 flip both axes,
and the closing 0xFF,0xFF terminator keeps the colours from coming up
inverted.

The pixel clock is INDICATOR_PCLK_HZ, 12 MHz by default. The RGB bus
reads its frame buffer out of PSRAM continuously and this core has no
bounce buffers, so PSRAM bandwidth under Wi-Fi and flash traffic sets
the limit, not the panel; 12 MHz leaves margin for that, and the value
is a build flag.

The backlight is Light_PWM on GPIO45, LEDC channel 7; brightness 0
writes duty 0, so it goes dark. begin() returns false with the
backlight off when lcd.init() or any expander write in the sequence
fails, since the panel may then have missed its reset or init. UITask
keeps driving the backlight through the global display even when
begin() failed, so setBrightness() and turnOn() do nothing until the
panel has come up; otherwise the first brightness or wake request
would light a blank panel.

UITask: a 480 px draw band in internal DMA RAM (with LVGL told its full
size), because the RGB panel scans its frame buffer out of PSRAM all
the time and an internal band makes the flush a single PSRAM write. The
resolution is 480x480 with no UI rotation, and the board shares the
Wio L2's brightness, screen-sleep and no-keyboard-rotate branches.

Signed-off-by: Confituurke <9595028+Confituurke@users.noreply.github.com>
2026-10-17 22:39:25 +02:00

2717 lines
99 KiB
INI
Raw Permalink Blame History

; wadamesh — Heltec V4 TFT touch firmware.
; Standalone PlatformIO project: the MeshCore core is consumed as a library
; (lib/MeshCore here; a git-tagged fork once published). This env is the flattened
; equivalent of meshcomod's heltec_v4_tft_companion_radio_usb_tcp_touch.
[platformio]
default_envs =
heltec_v4_tft_companion_radio_usb_tcp_touch
LilyGo_TDeck_companion_radio_touch
LilyGo_TDeck_Pro_v1_0_companion_radio_touch
LilyGo_TDeck_Pro_v1_1_companion_radio_touch
ThinkNode_M9_companion_radio_touch
[env:heltec_v4_tft_companion_radio_usb_tcp_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = heltec_v4
monitor_speed = 115200
board_build.partitions = partitions_tft_touch.csv
extra_scripts = pre:scripts/build/pre_gen_baked.py, pre:scripts/inject_wifi_env.py, pre:scripts/build/patch_lvgl_anim_uaf.py, pre:scripts/build/patch_lvgl_arabic.py, pre:scripts/build/patch_meshcore_txt_timestamp.py, pre:scripts/build/perf_lvgl.py, merge-bin.py
; perf_lvgl.py is here for the V4-R8, which extends this env; the V4 itself sets no options
; (no flash left for -O2, no internal RAM for IRAM), so its LVGL builds exactly as before.
build_flags =
; 1.17 core: ESP32Board.cpp includes <target.h> -> MicroNMEALocationProvider.h (header-only
; provider), so MicroNMEA never chains into the core lib's LDF scope -- hand it the path.
-I"${platformio.libdeps_dir}/${this.__env__}/MicroNMEA/src"
-Wno-deprecated-declarations -Wno-unused-parameter -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
-D MC_VENDORED_TOUCH_APP
; NOTE: tried -D ARDUINO_USB_MODE=1 (HW-CDC, drops unused TinyUSB MSC/DFU ≈ 12 KB internal
; DRAM) — but on the real V4 the binary companion link regressed: small per-message frames
; arrived yet the larger device-profile frame (node name + keys) dropped bytes over HW-CDC's
; smaller TX FIFO. Reverted to the board JSON's TinyUSB CDC. Revisit only with an HW-CDC TX
; buffer/DTR-wait fix verified on hardware. (T-Deck ships MODE=1 and is fine — board-specific.)
-D LORA_FREQ=869.618
-D LORA_BW=62.5
-D LORA_SF=8
-D ENABLE_PRIVATE_KEY_IMPORT=1
-D ENABLE_PRIVATE_KEY_EXPORT=1
-D RADIOLIB_EXCLUDE_CC1101=1
-D RADIOLIB_EXCLUDE_RF69=1
-D RADIOLIB_EXCLUDE_SX1231=1
-D RADIOLIB_EXCLUDE_SI443X=1
-D RADIOLIB_EXCLUDE_RFM2X=1
-D RADIOLIB_EXCLUDE_SX128X=1
-D RADIOLIB_EXCLUDE_AFSK=1
-D RADIOLIB_EXCLUDE_AX25=1
-D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
-D RADIOLIB_EXCLUDE_MORSE=1
-D RADIOLIB_EXCLUDE_APRS=1
-D RADIOLIB_EXCLUDE_BELL=1
-D RADIOLIB_EXCLUDE_RTTY=1
-D RADIOLIB_EXCLUDE_SSTV=1
-D ESP32_PLATFORM
; --- sensors ---
-D ENV_INCLUDE_GPS=1
-D ENV_INCLUDE_AHTX0=1
-D ENV_INCLUDE_BME280=1
-D ENV_INCLUDE_BMP280=1
-D ENV_INCLUDE_SHTC3=1
-D ENV_INCLUDE_SHT4X=1
-D ENV_INCLUDE_LPS22HB=1
-D ENV_INCLUDE_INA3221=1
-D ENV_INCLUDE_INA219=1
-D ENV_INCLUDE_INA226=1
-D ENV_INCLUDE_INA260=1
-D ENV_INCLUDE_MLX90614=1
-D ENV_INCLUDE_VL53L0X=1
-D ENV_INCLUDE_BME680=1
-D ENV_INCLUDE_BMP085=1
; --- Heltec LoRa32 V4 board ---
-I variants/heltec_v4
-D HELTEC_LORA_V4
-D USE_SX1262
-D ESP32_CPU_FREQ=80
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
; Original Expansion Kit SW3 "IO": active-low KEY net on GPIO35. This pin was
; previously treated as a TX LED, which drove the button line as an output.
; Navigation is more valuable on the cramped 240 px touch UI: short=Back,
; hold=Home. The PWR switch drives the EC190708 power controller directly and
; cannot provide a firmware short-press. The V4-R8 uses GPIO46 for its TX LED.
-D HELTEC_V4_EXPANSION_IO_PIN=35
-D P_LORA_DIO_1=14
-D P_LORA_NSS=8
-D P_LORA_RESET=12
-D P_LORA_BUSY=13
-D P_LORA_SCLK=9
-D P_LORA_MISO=11
-D P_LORA_MOSI=10
-D P_LORA_PA_POWER=7
-D P_LORA_PA_EN=2
-D P_LORA_PA_TX_EN=46
-D P_LORA_GC1109_PA_EN=2
-D P_LORA_GC1109_PA_TX_EN=46
-D P_LORA_KCT8103L_PA_CSD=2
-D P_LORA_KCT8103L_PA_CTX=5
-D PIN_USER_BTN=0
-D PIN_VEXT_EN=36
-D PIN_VEXT_EN_ACTIVE=HIGH
-D LORA_TX_POWER=10
-D MAX_LORA_TX_POWER=22
-D SX126X_REGISTER_PATCH=1
-D SX126X_DIO2_AS_RF_SWITCH=true
-D SX126X_DIO3_TCXO_VOLTAGE=1.8
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D PIN_GPS_RX=38
-D PIN_GPS_TX=39
-D PIN_GPS_RESET=42
-D PIN_GPS_RESET_ACTIVE=LOW
-D PIN_GPS_EN=34
-D PIN_GPS_EN_ACTIVE=LOW
-D PIN_ADC_CTRL=37
-D PIN_VBAT_READ=1
; --- TFT ---
-D HELTEC_LORA_V4_TFT
-D PIN_BOARD_SDA=4
-D PIN_BOARD_SCL=3
-D DISPLAY_ROTATION=2
-D DISPLAY_SCALE_X=1.0
-D DISPLAY_SCALE_Y=1.0
-D PIN_TFT_RST=18
-D PIN_TFT_VDD_CTL=-1
-D PIN_TFT_LEDA_CTL=21
-D PIN_TFT_LEDA_CTL_ACTIVE=HIGH
-D PIN_TFT_CS=15
-D PIN_TFT_DC=16
-D PIN_TFT_SCL=17
-D PIN_TFT_SDA=33
; --- CHSC6x cap touch ---
-D HAS_HELTEC_V4_CAP_TOUCH=1
-D PIN_TOUCH_SDA=47
-D PIN_TOUCH_SCL=48
-D PIN_TOUCH_RST=44
-D HELTEC_V4_BUZZER_PIN=6
; --- touch UI / companion stack ---
-I include
-I src
-I src/ui-touch
-D UI_LVGL=1
-D HAS_TOUCH_UI=1
; Heltec V4 Expansion Kit: local environment sensors UI (Sensors tab, Home env
; widget, Local-Sensors page). Board-gated — only this env compiles it.
-D HAS_EXPANSION_KIT=1
; Optional M5Stack CardKB on the board I2C bus (address 0x5F). Runtime-probed,
; so the normal on-screen keyboard remains unchanged when none is attached.
; Inherited by the V4-R8 target, whose touch/RTC/sensors share the same Wire.
-D HAS_CARDKB=1
-D FIRMWARE_OTA_ENV='"heltec_v4_tft_companion_radio_usb_tcp_touch"'
-D ENABLE_ADVERT_ON_BOOT=0
-D LV_CONF_PATH=lv_conf.h
-D LV_CONF_INCLUDE_SIMPLE=1
-D LV_MEMCPY_MEMSET_STD=1 ; newlib memcpy/memset in LVGL (see include/lv_conf.h)
; Smoother scroll: lower deceleration than LVGL's default (10) so flicks glide
; longer instead of stopping abruptly. lv_conf leaves this unset, so this -D wins.
-D LV_INDEV_DEF_SCROLL_THROW=7
-D USER_SETUP_LOADED=1
-D ST7789_DRIVER=1
-D TFT_WIDTH=240
-D TFT_HEIGHT=320
-D TFT_MOSI=33
-D TFT_SCLK=17
-D TFT_CS=15
-D TFT_DC=16
-D TFT_RST=18
-D TFT_MISO=-1
-D SPI_FREQUENCY=80000000
-D TFT_RGB_ORDER=TFT_RGB
-D TFT_INVERSION_ON=1
-D TFT_BL=21
-D TFT_BACKLIGHT_ON=1
-D MAX_CONTACTS=2000
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=ST7789LCDDisplay
-D ADMIN_PASSWORD='"password"'
-D MULTI_TRANSPORT_COMPANION=1
-D WADAMESH_FORK_BUILD=1
-D TCP_PORT=5000
-D WS_PORT=8765
-D BLE_PIN_CODE=123456
-D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
-D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
-D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
build_src_filter =
+<*.cpp>
+<*.c>
+<helpers/*.cpp>
+<helpers/esp32/*.cpp>
+<helpers/input/*.cpp>
+<ui-touch/*.cpp>
+<ui-touch/*.c>
+<../variants/heltec_v4/*.cpp>
lib_deps =
; MeshCore core = the meshcomod monorepo built as a lib, pinned by tag.
; Touch-app files (TouchPrefsStore, WifiRuntimeStore, transports, ...) are
; vendored in this app's src/ and dropped from the lib via -DMC_VENDORED_TOUCH_APP.
https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.18.0
SPI
Wire
jgromes/RadioLib @ ^7.6.0
rweather/Crypto @ ^0.4.0
adafruit/RTClib @ ^2.1.3
melopero/Melopero RV3028 @ ^1.1.0
electroniccats/CayenneLPP @ 1.6.1
h2zero/NimBLE-Arduino @ 1.4.3
adafruit/Adafruit INA3221 Library @ ^1.0.1
adafruit/Adafruit INA219 @ ^1.2.3
robtillaart/INA226 @ ^0.6.4
adafruit/Adafruit INA260 Library @ ^1.5.3
adafruit/Adafruit AHTX0 @ ^2.0.5
adafruit/Adafruit BME280 Library @ ^2.3.0
adafruit/Adafruit BMP280 Library @ ^2.6.8
adafruit/Adafruit SHTC3 Library @ ^1.0.1
sensirion/Sensirion I2C SHT4x @ ^1.1.2
arduino-libraries/Arduino_LPS22HB @ ^1.0.2
adafruit/Adafruit MLX90614 Library @ ^2.1.5
adafruit/Adafruit_VL53L0X @ ^1.2.4
stevemarple/MicroNMEA @ ^2.0.6
adafruit/Adafruit BME680 Library @ ^2.0.4
adafruit/Adafruit BMP085 Library @ ^1.2.4
adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
https://github.com/Quency-D/chsc6x/archive/5cbead829d6b432a8d621ed1aafd4eb474fd4f27.zip
ESP32Async/ESPAsyncWebServer @ 3.10.3
file://arch/esp32/AsyncElegantOTA
lvgl/lvgl @ ^8.3.11
bodmer/TFT_eSPI @ ^2.5.43
densaugeo/base64 @ ~1.4.0
knolleary/PubSubClient @ ^2.8.0
; ======================================================================
; Heltec WiFi LoRa 32 V4-R8 (ESP32-S3R8, 8 MB OCTAL PSRAM) + Expansion Kit V2.
; Inherits the V4 TFT env and overrides ONLY the R8 deltas. The 8 MB octal PSRAM
; claims GPIO33-37, so Heltec moved every control signal off them and the V2
; expansion put the TFT on a hardware-SPI bus SHARED with a new micro-SD slot:
; Vext 36->40 (now active-LOW) · GPS_EN 34->42 · LED 35->46 · ADC_Ctrl removed
; TFT (LovyanGFX HW-SPI): MOSI=15 SCK=16 MISO=45 CS=47 DC=48 RST=21 BL=44
; touch (CHSC6x, shares board I2C on 17/18) · micro-SD (shared TFT SPI, CS=3)
; The build defines HELTEC_LORA_V4_TFT too, so it reuses ALL the V4 touch-UI code;
; HELTEC_LORA_V4_R8 gates only the deltas. USB stays TinyUSB-CDC (USB_MODE=0) like
; the V4 — HW-CDC regresses the companion link on this family (see the V4 note).
; UNTESTED (no hardware yet) — pin sources: Meshtastic heltec_v4_r8 variant +
; Heltec V4-R8 pinmap + Expansion_board_V2.03 schematic. On-device TODO: confirm
; the CHSC6x shares Wire on 17/18, the SD_CS=3 read, and the V2 PAM8904 buzzer.
; ======================================================================
[env:heltec_v4_r8_tft_companion_radio_usb_tcp_touch]
extends = env:heltec_v4_tft_companion_radio_usb_tcp_touch
board = heltec_v4_r8
custom_lvgl_o2 = yes ; LVGL at -O2 (scripts/build/perf_lvgl.py), like the T-Deck
custom_lvgl_iram = lv_draw_sw_blend.c, lv_draw_label.c ; their hot loops in IRAM, paid by the band in PSRAM
; Own filter (not inherited): the R8's DISPLAY_CLASS is OUR LGFXDisplay, so the UIColor
; palette must be a project object (UIColorPalette.cpp) -- otherwise the linker pulls the
; core's same-named LGFXDisplay.o from the archive for UIColor and every method collides.
; (The base V4 env must NOT compile the palette: its core ST7789LCDDisplay.o carries one.)
build_src_filter =
+<*.cpp>
+<*.c>
+<helpers/*.cpp>
+<helpers/esp32/*.cpp>
+<helpers/input/*.cpp>
+<helpers/ui/UIColorPalette.cpp>
+<ui-touch/*.cpp>
+<ui-touch/*.c>
+<../variants/heltec_v4/*.cpp>
build_flags =
${env:heltec_v4_tft_companion_radio_usb_tcp_touch.build_flags}
; --- V4-R8 deltas (later -D wins on the GCC command line) ---
-D HELTEC_LORA_V4_R8
; The text-size presets use Montserrat 18/20/24. Those are generated fonts now
; (src/ui-touch/ui_font_NN.c, gated on this board's macro in the generator), not
; LVGL's: never force LV_FONT_MONTSERRAT_NN=1 here, it would link LVGL's copy too.
; Boot at the S3's full clock. The base env's ESP32_CPU_FREQ=80 is applied in
; ESP32Board::begin(), so ALL of setup() — radio init, the SD mount ladder, the
; store load, mesh begin, Wi-Fi bring-up — ran at a third speed until UITask::begin
; bumped it to 240. The screen-off DFS drop to 80 MHz (setCpuForScreen) is unaffected.
-D ESP32_CPU_FREQ=240
; micro-SD operating clock (perf pass 2026-08-20): after the conservative 4 MHz mount
; succeeds, re-begin at this clock with a directory + file READ verify and fall back
; to 4 MHz if it fails (include/SdFastClock.h). The same traces already carry the
; display at 80 MHz, and the card is the primary store on this board (contacts, chat
; history, sync log) — 4 MHz was the M9 ladder's value, never re-tuned here.
-D SD_SPI_FAST_HZ=20000000
-D P_LORA_TX_LED=46
-D PIN_VEXT_EN=40
-D PIN_VEXT_EN_ACTIVE=LOW
-D PIN_GPS_EN=42
-D PIN_GPS_RESET=-1
; GPS pins probed on real hardware 2026-08-19: with EN active-LOW asserted
; the module streams NMEA on GPIO39 (~6.9k edges/3 s); GPIO38 is silent.
; NAMING TRAP: EnvironmentSensorManager does Serial1.setPins(PIN_GPS_TX,
; PIN_GPS_RX) and Arduino's first setPins arg is OUR RX — i.e. the
; PIN_GPS_TX macro is the pin we RECEIVE on (module's TX). So the module's
; TX=GPIO39 belongs in PIN_GPS_TX, matching the inherited plain-V4 values.
; Restated explicitly here (with this note) so nobody "fixes" the apparent
; swap again. EN polarity active-LOW also hardware-confirmed.
-D PIN_GPS_RX=38
-D PIN_GPS_TX=39
-D PIN_ADC_CTRL=-1
-D ADC_MULTIPLIER=5.07
; TFT on hardware SPI (LovyanGFX), shared with the micro-SD
-D DISPLAY_CLASS=LGFXDisplay
-D PIN_TFT_RST=21
-D PIN_TFT_LEDA_CTL=44
-D PIN_TFT_CS=47
-D PIN_TFT_DC=48
-D PIN_TFT_SCL=16
-D PIN_TFT_SDA=15
-D PIN_TFT_MISO=45
; TFT_eSPI mirror (kept in sync though LovyanGFX drives the panel)
-D TFT_MOSI=15
-D TFT_SCLK=16
-D TFT_MISO=45
-D TFT_CS=47
-D TFT_DC=48
-D TFT_RST=21
-D TFT_BL=44
; touch (CHSC6x) + board I2C unified on GPIO17/18; micro-SD chip-select
-D PIN_TOUCH_SDA=17
-D PIN_TOUCH_SCL=18
; RST=-1 ON PURPOSE (tester repro fix): the Expansion V2 wires the CHSC6x reset to GPIO21 — the
; SAME line as the ST7789 reset. The chsc6x driver hard-pulses its RST at init (+3 retry sites),
; which RESET the LCD mid-boot and wiped its init: logo OK -> screen black -> white/garbled rows
; on any redraw. The LGFX display init already resets both chips via pin 21; the touch driver must
; never drive it (-1 = every pulse in chsc6x_platform no-ops).
-D PIN_TOUCH_RST=-1
-D PIN_TOUCH_INT=43
-D PIN_BOARD_SDA=17
-D PIN_BOARD_SCL=18
-D PIN_SD_CS=3
; Buzzer: the Expansion Kit V2 integrates a piezo behind a PAM8904 driver (U9). Per Heltec's
; Expansion_board_V2.03.pdf schematic: DIN = net "4" = GPIO4 (P2 header pin 15); EN1/EN2 are
; NOT GPIOs -- strapped high via 10K pull-ups (3x boost, always enabled) with DIP switch SW1
; on the expansion board as a HARDWARE MUTE (closed = EN grounded = silent). So the stock V4
; tone() chime works as-is on DIN. If a tester still hears nothing: check SW1 on their kit.
-D HELTEC_V4_BUZZER_PIN=4
-D FIRMWARE_OTA_ENV='"heltec_v4_r8_tft_companion_radio_usb_tcp_touch"'
lib_deps =
${env:heltec_v4_tft_companion_radio_usb_tcp_touch.lib_deps}
lovyan03/LovyanGFX@1.2.21
; ======================================================================
; Attaky Mesh Series: `pio run -e attaky_mesh_series_companion_radio_touch`.
; ======================================================================
[env:attaky_mesh_series_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = attaky_mesh_series
monitor_speed = 115200
board_build.partitions = partitions_tft_touch.csv
extra_scripts = pre:scripts/build/pre_gen_baked.py, pre:scripts/inject_wifi_env.py, pre:scripts/build/patch_lvgl_anim_uaf.py, pre:scripts/build/patch_lvgl_arabic.py, pre:scripts/build/patch_meshcore_txt_timestamp.py, pre:scripts/build/perf_lvgl.py, merge-bin.py
custom_lvgl_o2 = yes ; LVGL at -O2 (scripts/build/perf_lvgl.py), like the T-Deck
custom_lvgl_iram = lv_draw_sw_blend.c, lv_draw_label.c ; their hot loops in IRAM, paid by the band in PSRAM
build_flags =
; 1.17 core: ESP32Board.cpp includes <target.h> -> MicroNMEALocationProvider.h (header-only
; provider), so MicroNMEA never chains into the core lib's LDF scope -- hand it the path.
-I"${platformio.libdeps_dir}/${this.__env__}/MicroNMEA/src"
-Wno-deprecated-declarations -Wno-unused-parameter -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
-D MC_VENDORED_TOUCH_APP
-D LORA_FREQ=910.525
-D LORA_BW=250
-D LORA_SF=7
-D ENABLE_PRIVATE_KEY_IMPORT=1
-D ENABLE_PRIVATE_KEY_EXPORT=1
-D RADIOLIB_EXCLUDE_CC1101=1
-D RADIOLIB_EXCLUDE_RF69=1
-D RADIOLIB_EXCLUDE_SX1231=1
-D RADIOLIB_EXCLUDE_SI443X=1
-D RADIOLIB_EXCLUDE_RFM2X=1
-D RADIOLIB_EXCLUDE_SX128X=1
-D RADIOLIB_EXCLUDE_AFSK=1
-D RADIOLIB_EXCLUDE_AX25=1
-D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
-D RADIOLIB_EXCLUDE_MORSE=1
-D RADIOLIB_EXCLUDE_APRS=1
-D RADIOLIB_EXCLUDE_BELL=1
-D RADIOLIB_EXCLUDE_RTTY=1
-D RADIOLIB_EXCLUDE_SSTV=1
-D ESP32_PLATFORM
-D ENV_INCLUDE_GPS=1
; 0x38 is the FT6636 touch controller, not an AHT10/20. The Adafruit probe
; mis-detects it as a sensor and can hang boot on its register 0xBA, so keep off.
-D ENV_INCLUDE_AHTX0=0
-D ENV_INCLUDE_BME280=1
-D ENV_INCLUDE_BMP280=1
-D ENV_INCLUDE_SHTC3=1
-D ENV_INCLUDE_SHT4X=1
-D ENV_INCLUDE_LPS22HB=1
-D ENV_INCLUDE_INA3221=1
-D ENV_INCLUDE_INA219=1
-D ENV_INCLUDE_INA226=1
-D ENV_INCLUDE_INA260=1
; 0x5A is the keyboard module's AW9523 (left half), not an MLX90614.
-D ENV_INCLUDE_MLX90614=0
-D ENV_INCLUDE_VL53L0X=1
-D ENV_INCLUDE_BME680=1
-D ENV_INCLUDE_BMP085=1
-I variants/attaky_mesh_series
-D ATTAKY_MESH_SERIES
-D HAS_ATTAKY_MESH_KEYBOARD=1
-D USE_SX1262
-D ESP32_CPU_FREQ=80
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D P_LORA_DIO_1=21
-D P_LORA_NSS=8
-D P_LORA_RESET=9
-D P_LORA_BUSY=16
-D P_LORA_SCLK=5
-D P_LORA_MISO=7
-D P_LORA_MOSI=6
-D PIN_USER_BTN=0
-D LORA_TX_POWER=10
-D MAX_LORA_TX_POWER=22
-D SX126X_REGISTER_PATCH=1
-D SX126X_DIO2_AS_RF_SWITCH=true
; Ra-01SH clocks the SX1262 from a 32 MHz crystal, not a TCXO, so DIO3 is not a
; TCXO supply. Must be 0 explicitly: std_init() defaults to 1.6 V otherwise.
-D SX126X_DIO3_TCXO_VOLTAGE=0
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D PIN_GPS_RX=18
-D PIN_GPS_TX=17
; EnvironmentSensorManager reads GPS_BAUD_RATE, not GPS_BAUD.
-D GPS_BAUD_RATE=9600
; ATGM336H cold-start can exceed the 1 s probe window. Without this the probe
; gives up and start_gps() never runs, so GPS reads on but nothing is parsed.
-D ENV_SKIP_GPS_DETECT=1
; Keep the base rotation portrait; UITask applies the landscape transform.
-D PIN_BOARD_SDA=2
-D PIN_BOARD_SCL=1
-D DISPLAY_ROTATION=2
-D DISPLAY_SCALE_X=1.0
-D DISPLAY_SCALE_Y=1.0
-D PIN_TFT_RST=10
-D PIN_TFT_VDD_CTL=-1
-D PIN_TFT_LEDA_CTL=14
-D PIN_TFT_LEDA_CTL_ACTIVE=HIGH
-D PIN_TFT_CS=45
-D PIN_TFT_DC=12
-D PIN_TFT_SCL=11
-D PIN_TFT_SDA=13
-I include
-I src
-I src/ui-touch
-D UI_LVGL=1
-D HAS_TOUCH_UI=1
-D FIRMWARE_OTA_ENV='"attaky_mesh_series_companion_radio_touch"'
-D ENABLE_ADVERT_ON_BOOT=0
-D LV_CONF_PATH=lv_conf.h
-D LV_CONF_INCLUDE_SIMPLE=1
-D LV_MEMCPY_MEMSET_STD=1 ; newlib memcpy/memset in LVGL (see include/lv_conf.h)
-D LV_INDEV_DEF_SCROLL_THROW=7
-D USER_SETUP_LOADED=1
-D ST7789_DRIVER=1
-D TFT_WIDTH=240
-D TFT_HEIGHT=320
-D TFT_MOSI=13
-D TFT_SCLK=11
-D TFT_CS=45
-D TFT_DC=12
-D TFT_RST=10
-D TFT_MISO=-1
-D SPI_FREQUENCY=80000000
-D TFT_RGB_ORDER=TFT_RGB
-D TFT_INVERSION_ON=1
-D TFT_BL=14
-D TFT_BACKLIGHT_ON=1
-D MAX_CONTACTS=2000
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=ST7789LCDDisplay
-D ADMIN_PASSWORD='"password"'
-D MULTI_TRANSPORT_COMPANION=1
-D WADAMESH_FORK_BUILD=1
-D TCP_PORT=5000
-D WS_PORT=8765
-D BLE_PIN_CODE=123456
-D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
-D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
-D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
build_src_filter =
+<*.cpp>
+<*.c>
+<helpers/*.cpp>
+<helpers/esp32/*.cpp>
+<helpers/input/*.cpp>
; The Attaky driver provides the shared touch API.
-<helpers/input/TDeckTouch.cpp>
+<ui-touch/*.cpp>
+<ui-touch/*.c>
+<../variants/attaky_mesh_series/*.cpp>
lib_deps =
https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.18.0
SPI
Wire
jgromes/RadioLib @ ^7.6.0
rweather/Crypto @ ^0.4.0
adafruit/RTClib @ ^2.1.3
melopero/Melopero RV3028 @ ^1.1.0
electroniccats/CayenneLPP @ 1.6.1
h2zero/NimBLE-Arduino @ 1.4.3
adafruit/Adafruit INA3221 Library @ ^1.0.1
adafruit/Adafruit INA219 @ ^1.2.3
robtillaart/INA226 @ ^0.6.4
adafruit/Adafruit INA260 Library @ ^1.5.3
adafruit/Adafruit AHTX0 @ ^2.0.5
adafruit/Adafruit BME280 Library @ ^2.3.0
adafruit/Adafruit BMP280 Library @ ^2.6.8
adafruit/Adafruit SHTC3 Library @ ^1.0.1
sensirion/Sensirion I2C SHT4x @ ^1.1.2
arduino-libraries/Arduino_LPS22HB @ ^1.0.2
adafruit/Adafruit MLX90614 Library @ ^2.1.5
adafruit/Adafruit_VL53L0X @ ^1.2.4
stevemarple/MicroNMEA @ ^2.0.6
adafruit/Adafruit BME680 Library @ ^2.0.4
adafruit/Adafruit BMP085 Library @ ^1.2.4
adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
https://github.com/Quency-D/chsc6x/archive/5cbead829d6b432a8d621ed1aafd4eb474fd4f27.zip
ESP32Async/ESPAsyncWebServer @ 3.10.3
file://arch/esp32/AsyncElegantOTA
lvgl/lvgl @ ^8.3.11
bodmer/TFT_eSPI @ ^2.5.43
densaugeo/base64 @ ~1.4.0
knolleary/PubSubClient @ ^2.8.0
; ======================================================================
; LilyGo T-Deck / T-Deck Plus — flattened equivalent of meshcomod's
; LilyGo_TDeck_companion_radio_touch. ST7789 via Adafruit (not TFT_eSPI);
; GT911 touch + matrix keyboard + trackball; sensors off except GPS.
; ======================================================================
[env:LilyGo_TDeck_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = t-deck
monitor_speed = 115200
board_build.partitions = variants/lilygo_tdeck/partitions_tdeck_touch.csv
extra_scripts = pre:scripts/build/pre_gen_baked.py, pre:scripts/inject_wifi_env.py, pre:scripts/build/patch_lvgl_anim_uaf.py, pre:scripts/build/patch_lvgl_arabic.py, pre:scripts/build/patch_meshcore_txt_timestamp.py, pre:scripts/build/perf_lvgl.py, merge-bin.py
custom_lvgl_o2 = yes ; LVGL at -O2 (scripts/build/perf_lvgl.py): ~5% less time a frame, ~39 KB flash
custom_lvgl_iram = lv_draw_sw_blend.c, lv_draw_label.c ; their hot loops in IRAM: ~8% less a frame, ~6 KB internal RAM
build_flags =
; 1.17 core: ESP32Board.cpp includes <target.h> -> MicroNMEALocationProvider.h (header-only
; provider), so MicroNMEA never chains into the core lib's LDF scope -- hand it the path.
-I"${platformio.libdeps_dir}/${this.__env__}/MicroNMEA/src"
-Wno-deprecated-declarations -Wno-unused-parameter -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
-D MC_VENDORED_TOUCH_APP
-D LORA_FREQ=869.618
-D LORA_BW=62.5
-D LORA_SF=8
-D ENABLE_PRIVATE_KEY_IMPORT=1
-D ENABLE_PRIVATE_KEY_EXPORT=1
-D RADIOLIB_EXCLUDE_CC1101=1
-D RADIOLIB_EXCLUDE_RF69=1
-D RADIOLIB_EXCLUDE_SX1231=1
-D RADIOLIB_EXCLUDE_SI443X=1
-D RADIOLIB_EXCLUDE_RFM2X=1
-D RADIOLIB_EXCLUDE_SX128X=1
-D RADIOLIB_EXCLUDE_AFSK=1
-D RADIOLIB_EXCLUDE_AX25=1
-D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
-D RADIOLIB_EXCLUDE_MORSE=1
-D RADIOLIB_EXCLUDE_APRS=1
-D RADIOLIB_EXCLUDE_BELL=1
-D RADIOLIB_EXCLUDE_RTTY=1
-D RADIOLIB_EXCLUDE_SSTV=1
-D ESP32_PLATFORM
; --- T-Deck board ---
-I variants/lilygo_tdeck
-D LILYGO_TDECK
-D BOARD_HAS_PSRAM=1
; 0 = silence ARDUHAL [E] spam (benign vfs_api cache-miss "no permits for
; creation" + Preferences nvs_open NOT_FOUND on first-namespace-access) that
; also pollutes the USB-CDC companion stream. Our own Serial.printf logs stay.
-D CORE_DEBUG_LEVEL=0
-D ARDUINO_USB_CDC_ON_BOOT=1
-D PIN_USER_BTN=0
-D PIN_PERF_POWERON=10
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22
; The T-Deck's SX1262 antenna (TX/RX) switch is driven by DIO2 — this MUST be
; true. With it false, setDio2AsRfSwitch(false) leaves the switch uncontrolled,
; so on TX the +22 dBm PA is never routed to the antenna (~16 dB loss -> ~4 mW).
; That was issue #6. (Meshtastic's T-Deck + the Heltec V4 here + every other
; MeshCore SX1262 variant use true; the T-Deck was the lone outlier.)
-D SX126X_DIO2_AS_RF_SWITCH=true
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D SX126X_DIO3_TCXO_VOLTAGE=1.8f
-D P_LORA_DIO_1=45
-D P_LORA_NSS=9
-D P_LORA_RESET=17
-D P_LORA_BUSY=13
-D P_LORA_SCLK=40
-D P_LORA_MISO=38
-D P_LORA_MOSI=41
-D ENV_INCLUDE_GPS=1
-D ENV_SKIP_GPS_DETECT=1
-D ENV_INCLUDE_AHTX0=0
-D ENV_INCLUDE_BME280=0
-D ENV_INCLUDE_BMP280=0
-D ENV_INCLUDE_SHTC3=0
-D ENV_INCLUDE_SHT4X=0
-D ENV_INCLUDE_LPS22HB=0
-D ENV_INCLUDE_INA3221=0
-D ENV_INCLUDE_INA219=0
-D ENV_INCLUDE_INA226=0
-D ENV_INCLUDE_INA260=0
-D ENV_INCLUDE_MLX90614=0
-D ENV_INCLUDE_VL53L0X=0
-D ENV_INCLUDE_BME680=0
-D ENV_INCLUDE_BMP085=0
-D DISPLAY_SCALE_X=1.0
-D DISPLAY_SCALE_Y=1.0
-D PIN_TFT_RST=-1
-D PIN_TFT_VDD_CTL=-1
-D PIN_TFT_LEDA_CTL=42
-D PIN_TFT_CS=12
-D PIN_TFT_DC=11
-D PIN_TFT_SCL=40
-D PIN_TFT_SDA=41
-D PIN_GPS_RX=43
-D PIN_GPS_TX=44
-D GPS_BAUD_RATE=38400
; --- touch UI / companion stack ---
-I include
-I src
-I src/ui-touch
-D UI_LVGL=1
-D HAS_TOUCH_UI=1
-D FIRMWARE_OTA_ENV='"LilyGo_TDeck_companion_radio_touch"'
-D HAS_TDECK_GT911=1
-D HAS_TDECK_TRACKBALL=1
-D HAS_TDECK_KEYBOARD=1
; Montserrat 20 for the "at a glance" body (atGlanceEnsureFont() in UITask.cpp) is a
; generated font, gated on HAS_TDECK_GT911 in scripts/build/gen-touch-fonts.sh. It is
; not switched in lv_conf.h because .pio/libdeps/<env>/MeshCore/include/lv_conf.h -- a
; stale snapshot vendored by the pinned core tag -- sits earlier in the -I search order
; than this repo's own include/lv_conf.h, so LV_CONF_INCLUDE_SIMPLE's quoted #include
; "lv_conf.h" resolves to that stale copy for src/ compiles (though library .c files,
; e.g. lvgl's own, still see the right one -- inconsistent per TU). Never force
; LV_FONT_MONTSERRAT_NN=1: it would link LVGL's own copy beside the generated one.
-D ENABLE_ADVERT_ON_BOOT=0
-D PIN_TB_UP=15
-D PIN_TB_DOWN=3
-D PIN_TB_LEFT=2
-D PIN_TB_RIGHT=1
-D LV_CONF_PATH=lv_conf.h
-D LV_CONF_INCLUDE_SIMPLE=1
-D LV_MEMCPY_MEMSET_STD=1 ; newlib memcpy/memset in LVGL (see include/lv_conf.h)
; Smoother scroll: lower deceleration than LVGL's default (10) so flicks glide
; longer instead of stopping abruptly. lv_conf leaves this unset, so this -D wins.
-D LV_INDEV_DEF_SCROLL_THROW=7
-D MAX_CONTACTS=2000
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=ST7789LCDDisplay
-D ADMIN_PASSWORD='"password"'
-D MULTI_TRANSPORT_COMPANION=1
-D WADAMESH_FORK_BUILD=1
-D TCP_PORT=5000
-D WS_PORT=8765
-D BLE_PIN_CODE=123456
-D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
-D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
-D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
build_src_filter =
+<*.cpp>
+<*.c>
+<helpers/*.cpp>
+<helpers/esp32/*.cpp>
+<helpers/input/*.cpp>
+<ui-touch/*.cpp>
+<ui-touch/*.c>
+<../variants/lilygo_tdeck/*.cpp>
lib_deps =
https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.18.0
SPI
Wire
jgromes/RadioLib @ ^7.6.0
rweather/Crypto @ ^0.4.0
adafruit/RTClib @ ^2.1.3
melopero/Melopero RV3028 @ ^1.1.0
electroniccats/CayenneLPP @ 1.6.1
h2zero/NimBLE-Arduino @ 1.4.3
adafruit/Adafruit INA3221 Library @ ^1.0.1
adafruit/Adafruit INA219 @ ^1.2.3
robtillaart/INA226 @ ^0.6.4
adafruit/Adafruit INA260 Library @ ^1.5.3
adafruit/Adafruit AHTX0 @ ^2.0.5
adafruit/Adafruit BME280 Library @ ^2.3.0
adafruit/Adafruit BMP280 Library @ ^2.6.8
adafruit/Adafruit SHTC3 Library @ ^1.0.1
sensirion/Sensirion I2C SHT4x @ ^1.1.2
arduino-libraries/Arduino_LPS22HB @ ^1.0.2
adafruit/Adafruit MLX90614 Library @ ^2.1.5
adafruit/Adafruit_VL53L0X @ ^1.2.4
stevemarple/MicroNMEA @ ^2.0.6
adafruit/Adafruit BME680 Library @ ^2.0.4
adafruit/Adafruit BMP085 Library @ ^1.2.4
adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
ESP32Async/ESPAsyncWebServer @ 3.10.3
file://arch/esp32/AsyncElegantOTA
lvgl/lvgl @ ^8.3.11
densaugeo/base64 @ ~1.4.0
knolleary/PubSubClient @ ^2.8.0
; ======================================================================
; LilyGo T-Deck Pro shared configuration. V1.0 and V1.1 have incompatible
; touch-reset/e-paper/frontlight wiring, so only the explicit revision envs
; below are build targets. See variants/lilygo_tdeck_pro/PORT.md.
; ======================================================================
[tdeck_pro_base]
platform = platformio/espressif32@6.11.0
framework = arduino
board = t-deck-pro
monitor_speed = 115200
upload_speed = 921600
board_build.arduino.memory_type = qio_qspi
board_build.flash_size = 16MB
board_upload.flash_size = 16MB
board_upload.maximum_size = 16777216
board_build.partitions = variants/lilygo_tdeck/partitions_tdeck_touch.csv
extra_scripts = pre:scripts/build/pre_gen_baked.py, pre:scripts/inject_wifi_env.py, pre:scripts/build/patch_lvgl_anim_uaf.py, pre:scripts/build/patch_lvgl_arabic.py, pre:scripts/build/patch_meshcore_txt_timestamp.py, merge-bin.py
build_unflags =
-std=gnu++11
build_flags =
-I variants/lilygo_tdeck_pro
-I include
-I src
-I src/ui-touch
-Wno-deprecated-declarations
-Wno-unused-parameter
-std=gnu++17
-DNDEBUG
-DRADIOLIB_STATIC_ONLY=1
-DRADIOLIB_GODMODE=1
-D MC_VENDORED_TOUCH_APP
-D ESP32_PLATFORM
-D HAS_TDECK_PRO=1
-D HAS_TOUCH_UI=1
-D HAS_PAGER_KEYBOARD=1
-D BOARD_HAS_PSRAM=1
-D CORE_DEBUG_LEVEL=0
-D ARDUINO_USB_CDC_ON_BOOT=1
-D ARDUINO_USB_MODE=1
-D ESP32_CPU_FREQ=240
-D LORA_FREQ=869.618
-D LORA_BW=62.5
-D LORA_SF=8
-D USE_SX1262=1
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22
-D P_LORA_NSS=3
-D P_LORA_RESET=4
-D P_LORA_DIO_1=5
-D P_LORA_BUSY=6
-D P_LORA_SCLK=36
-D P_LORA_MISO=47
-D P_LORA_MOSI=33
-D PIN_PERF_POWERON=46
-D SX126X_DIO2_AS_RF_SWITCH=true
-D SX126X_DIO3_TCXO_VOLTAGE=2.4f
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D RADIOLIB_EXCLUDE_CC1101=1
-D RADIOLIB_EXCLUDE_RF69=1
-D RADIOLIB_EXCLUDE_SX1231=1
-D RADIOLIB_EXCLUDE_SI443X=1
-D RADIOLIB_EXCLUDE_RFM2X=1
-D RADIOLIB_EXCLUDE_SX128X=1
-D RADIOLIB_EXCLUDE_AFSK=1
-D RADIOLIB_EXCLUDE_AX25=1
-D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
-D RADIOLIB_EXCLUDE_MORSE=1
-D RADIOLIB_EXCLUDE_APRS=1
-D RADIOLIB_EXCLUDE_BELL=1
-D RADIOLIB_EXCLUDE_RTTY=1
-D RADIOLIB_EXCLUDE_SSTV=1
-D PIN_TFT_SCLK=36
-D PIN_TFT_MISO=47
-D PIN_TFT_MOSI=33
-D PIN_TFT_CS=34
-D PIN_TFT_DC=35
-D PIN_TFT_BUSY=37
-D PIN_TOUCH_INT=12
-D PIN_TOUCH_ADDR=0x1A
-D PIN_BOARD_SDA=13
-D PIN_BOARD_SCL=14
-D PIN_KB_ADDR=0x34
-D KB_INT=15
-D KB_BACKLIGHT=42
-D PIN_USER_BTN=0
-D PIN_SD_CS=48
-D ENV_INCLUDE_GPS=1
-D ENV_SKIP_GPS_DETECT=1
-D PIN_GPS_TX=44
-D PIN_GPS_RX=43
-D PIN_GPS_EN=39
-D PIN_GPS_EN_ACTIVE=HIGH
-D GPS_BAUD_RATE=38400
-D ENV_INCLUDE_AHTX0=0
-D ENV_INCLUDE_BME280=0
-D ENV_INCLUDE_BMP280=0
-D ENV_INCLUDE_SHTC3=0
-D ENV_INCLUDE_SHT4X=0
-D ENV_INCLUDE_LPS22HB=0
-D ENV_INCLUDE_INA3221=0
-D ENV_INCLUDE_INA219=0
-D ENV_INCLUDE_INA226=0
-D ENV_INCLUDE_INA260=0
-D ENV_INCLUDE_MLX90614=0
-D ENV_INCLUDE_VL53L0X=0
-D ENV_INCLUDE_BME680=0
-D ENV_INCLUDE_BMP085=0
-D DISPLAY_CLASS=TDeckProDisplay
-D DISPLAY_ROTATION=0
-D DISPLAY_SCALE_X=1.0
-D DISPLAY_SCALE_Y=1.0
-D UI_LVGL=1
-D ENABLE_ADVERT_ON_BOOT=0
-D LV_CONF_PATH=lv_conf_tdeck_pro.h
-D LV_CONF_INCLUDE_SIMPLE=1
-D LV_MEMCPY_MEMSET_STD=1 ; newlib memcpy/memset in LVGL (see include/lv_conf.h)
-D MAX_CONTACTS=2000
-D MAX_GROUP_CHANNELS=40
-D ADMIN_PASSWORD='"password"'
-D MULTI_TRANSPORT_COMPANION=1
-D WADAMESH_FORK_BUILD=1
-D TCP_PORT=5000
-D WS_PORT=8765
-D BLE_PIN_CODE=123456
-D ENABLE_PRIVATE_KEY_IMPORT=1
-D ENABLE_PRIVATE_KEY_EXPORT=1
-D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
-D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
-D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
build_src_filter =
+<*.cpp>
+<*.c>
+<helpers/*.cpp>
+<helpers/esp32/*.cpp>
+<helpers/input/*.cpp>
-<helpers/input/TDeckTouch.cpp>
+<helpers/ui/UIColorPalette.cpp>
+<ui-touch/*.cpp>
+<ui-touch/*.c>
+<../variants/lilygo_tdeck_pro/*.cpp>
lib_deps =
https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.18.0
SPI
Wire
SD
jgromes/RadioLib @ ^7.6.0
rweather/Crypto @ ^0.4.0
adafruit/RTClib @ ^2.1.3
melopero/Melopero RV3028 @ ^1.1.0
electroniccats/CayenneLPP @ 1.6.1
h2zero/NimBLE-Arduino @ 1.4.3
stevemarple/MicroNMEA @ ^2.0.6
adafruit/Adafruit TCA8418 @ ^1.0.2
lovyan03/LovyanGFX @ 1.2.21
zinggjm/GxEPD2 @ 1.6.9
https://github.com/CIRCUITSTATE/CSE_Touch/archive/b44f23b6f870b848f1fbe453c190879bc6cfaafa.zip
https://github.com/CIRCUITSTATE/CSE_CST328/archive/refs/tags/v0.0.4.zip
ESP32Async/ESPAsyncWebServer @ 3.10.3
file://arch/esp32/AsyncElegantOTA
lvgl/lvgl @ ^8.3.11
densaugeo/base64 @ ~1.4.0
knolleary/PubSubClient @ ^2.8.0
; ======================================================================
; LilyGo T-Deck Pro V1.1 — touch reset GPIO38, e-paper reset GPIO16,
; frontlight GPIO45. DRV2605 at I2C 0x5A distinguishes it from V1.0.
; ======================================================================
[env:LilyGo_TDeck_Pro_v1_1_companion_radio_touch]
extends = tdeck_pro_base
build_flags =
; target.h is included while MeshCore itself is compiled. PlatformIO's LDF
; does not expose sibling lib_deps from that scope, so make transitive paths explicit.
-I"${platformio.libdeps_dir}/${this.__env__}/MicroNMEA/src"
-I"${platformio.libdeps_dir}/${this.__env__}/GxEPD2/src"
-I"${platformio.libdeps_dir}/${this.__env__}/Adafruit GFX Library"
-I"${platformio.libdeps_dir}/${this.__env__}/Adafruit BusIO"
-I"${platformio.libdeps_dir}/${this.__env__}/CSE_Touch/src"
-I"${platformio.libdeps_dir}/${this.__env__}/CSE_CST328/src"
-I"${platformio.libdeps_dir}/${this.__env__}/LovyanGFX/src"
${tdeck_pro_base.build_flags}
-D HAS_TDECK_PRO_V1_1=1
-D PIN_TFT_RST=16
-D PIN_TFT_LEDA_CTL=45
-D TDECK_PRO_FRONTLIGHT_CHANNEL=0
-D PIN_TOUCH_RST=38
-D FIRMWARE_OTA_ENV='"LilyGo_TDeck_Pro_v1_1_companion_radio_touch"'
; Compatibility alias for existing local commands. It is intentionally absent
; from default_envs and release tooling; all published builds use the V1.1 id.
[env:LilyGo_TDeck_Pro_companion_radio_touch]
extends = tdeck_pro_base
build_flags =
-I"${platformio.libdeps_dir}/${this.__env__}/MicroNMEA/src"
-I"${platformio.libdeps_dir}/${this.__env__}/GxEPD2/src"
-I"${platformio.libdeps_dir}/${this.__env__}/Adafruit GFX Library"
-I"${platformio.libdeps_dir}/${this.__env__}/Adafruit BusIO"
-I"${platformio.libdeps_dir}/${this.__env__}/CSE_Touch/src"
-I"${platformio.libdeps_dir}/${this.__env__}/CSE_CST328/src"
-I"${platformio.libdeps_dir}/${this.__env__}/LovyanGFX/src"
${tdeck_pro_base.build_flags}
-D HAS_TDECK_PRO_V1_1=1
-D PIN_TFT_RST=16
-D PIN_TFT_LEDA_CTL=45
-D TDECK_PRO_FRONTLIGHT_CHANNEL=0
-D PIN_TOUCH_RST=38
-D FIRMWARE_OTA_ENV='"LilyGo_TDeck_Pro_v1_1_companion_radio_touch"'
; ======================================================================
; LilyGo T-Deck Pro V1.0 — touch reset GPIO45, no e-paper reset or
; frontlight, and the 1.8 V peripheral rail enable on GPIO38.
; ======================================================================
[env:LilyGo_TDeck_Pro_v1_0_companion_radio_touch]
extends = tdeck_pro_base
build_flags =
-I"${platformio.libdeps_dir}/${this.__env__}/MicroNMEA/src"
-I"${platformio.libdeps_dir}/${this.__env__}/GxEPD2/src"
-I"${platformio.libdeps_dir}/${this.__env__}/Adafruit GFX Library"
-I"${platformio.libdeps_dir}/${this.__env__}/Adafruit BusIO"
-I"${platformio.libdeps_dir}/${this.__env__}/CSE_Touch/src"
-I"${platformio.libdeps_dir}/${this.__env__}/CSE_CST328/src"
-I"${platformio.libdeps_dir}/${this.__env__}/LovyanGFX/src"
${tdeck_pro_base.build_flags}
-D HAS_TDECK_PRO_V1_0=1
-D PIN_TFT_RST=-1
-D PIN_TFT_LEDA_CTL=-1
-D PIN_TOUCH_RST=45
-D PIN_1V8_EN=38
-D FIRMWARE_OTA_ENV='"LilyGo_TDeck_Pro_v1_0_companion_radio_touch"'
; ======================================================================
; LilyGo T-Deck Max -- the T-Deck Pro's ESP32-S3, SX1262, 240x320
; GDEQ031T10 e-paper, CST328/CST3530 touch, TCA8418 keyboard, microSD and
; GPS, with the peripheral power enables and resets moved onto an XL9555
; I/O expander and a BQ27220 fuel gauge for battery reporting. Reuses the
; Pro's display and touch drivers unchanged; see variants/lilygo_tdeck_max/PORT.md.
; ======================================================================
[env:LilyGo_TDeck_Max_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = t-deck-max
monitor_speed = 115200
upload_speed = 921600
board_build.arduino.memory_type = qio_qspi
board_build.flash_size = 16MB
board_upload.flash_size = 16MB
board_upload.maximum_size = 16777216
board_build.partitions = variants/lilygo_tdeck/partitions_tdeck_touch.csv
extra_scripts = pre:scripts/build/pre_gen_baked.py, pre:scripts/inject_wifi_env.py, pre:scripts/build/patch_lvgl_anim_uaf.py, pre:scripts/build/patch_lvgl_arabic.py, pre:scripts/build/patch_meshcore_txt_timestamp.py, merge-bin.py
build_unflags =
-std=gnu++11
build_flags =
-I"${platformio.libdeps_dir}/${this.__env__}/MicroNMEA/src"
; target.h is included while MeshCore itself is compiled. PlatformIO's LDF
; does not expose sibling lib_deps from that scope, so make the Pro display's
; transitive headers explicit (same issue as MicroNMEA and Wio LovyanGFX).
-I"${platformio.libdeps_dir}/${this.__env__}/GxEPD2/src"
-I"${platformio.libdeps_dir}/${this.__env__}/Adafruit GFX Library"
-I"${platformio.libdeps_dir}/${this.__env__}/Adafruit BusIO"
-I"${platformio.libdeps_dir}/${this.__env__}/CSE_Touch/src"
-I"${platformio.libdeps_dir}/${this.__env__}/CSE_CST328/src"
-I"${platformio.libdeps_dir}/${this.__env__}/LovyanGFX/src"
-I"${platformio.libdeps_dir}/${this.__env__}/SensorLib/src" ; TDeckMaxBoard.h needs XL9555/BQ27220 (same as the Pager)
; Max variant first (target.h, TDeckMaxBoard.h, TDeckMaxGps.h), then the
; Pro variant for the display and touch drivers it reuses unchanged, then the
; pager variant for the shared ES8311 codec driver (Es8311Codec.h).
-I variants/lilygo_tdeck_max
-I variants/lilygo_tdeck_pro
-I variants/lilygo_tlora_pager
-I include
-I src
-I src/ui-touch
-Wno-deprecated-declarations
-Wno-unused-parameter
-std=gnu++17
-DNDEBUG
-DRADIOLIB_STATIC_ONLY=1
-DRADIOLIB_GODMODE=1
-D MC_VENDORED_TOUCH_APP
-D ESP32_PLATFORM
-D HAS_TDECK_PRO=1
-D HAS_TDECK_MAX=1
-D HAS_TOUCH_UI=1
-D HAS_PAGER_KEYBOARD=1
-D BOARD_HAS_PSRAM=1
-D CORE_DEBUG_LEVEL=0
-D ARDUINO_USB_CDC_ON_BOOT=1
-D ARDUINO_USB_MODE=1
-D ESP32_CPU_FREQ=240
-D LORA_FREQ=869.618
-D LORA_BW=62.5
-D LORA_SF=8
-D USE_SX1262=1
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22
-D P_LORA_NSS=3
-D P_LORA_RESET=4
-D P_LORA_DIO_1=5
-D P_LORA_BUSY=6
-D P_LORA_SCLK=36
-D P_LORA_MISO=47
-D P_LORA_MOSI=33
; No PIN_PERF_POWERON: on the Max the LoRa supply is XL9555 line 1, switched in
; TDeckMaxBoard::begin(); GPIO 46 is not a power gate on this board.
-D SX126X_DIO2_AS_RF_SWITCH=true
-D SX126X_DIO3_TCXO_VOLTAGE=2.4f
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D RADIOLIB_EXCLUDE_CC1101=1
-D RADIOLIB_EXCLUDE_RF69=1
-D RADIOLIB_EXCLUDE_SX1231=1
-D RADIOLIB_EXCLUDE_SI443X=1
-D RADIOLIB_EXCLUDE_RFM2X=1
-D RADIOLIB_EXCLUDE_SX128X=1
-D RADIOLIB_EXCLUDE_AFSK=1
-D RADIOLIB_EXCLUDE_AX25=1
-D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
-D RADIOLIB_EXCLUDE_MORSE=1
-D RADIOLIB_EXCLUDE_APRS=1
-D RADIOLIB_EXCLUDE_BELL=1
-D RADIOLIB_EXCLUDE_RTTY=1
-D RADIOLIB_EXCLUDE_SSTV=1
-D PIN_TFT_SCLK=36
-D PIN_TFT_MISO=47
-D PIN_TFT_MOSI=33
-D PIN_TFT_CS=34
-D PIN_TFT_DC=35
-D PIN_TFT_RST=9
-D PIN_TFT_BUSY=37
-D PIN_TFT_LEDA_CTL=41
-D TDECK_PRO_FRONTLIGHT_CHANNEL=0
; Touch reset is XL9555 line 7, pulsed in TDeckMaxBoard::begin(). -1 makes
; CSE_CST328 skip its own GPIO pulse and turns the display's resetTouch() into
; a no-op (GPIO 38 is the ES8311 MCLK on this board).
-D PIN_TOUCH_RST=-1
-D PIN_TOUCH_INT=12
-D PIN_TOUCH_ADDR=0x1A
-D PIN_BOARD_SDA=13
-D PIN_BOARD_SCL=14
-D PIN_KB_ADDR=0x34
-D KB_INT=15
-D KB_BACKLIGHT=42
-D PIN_USER_BTN=0
-D PIN_SD_CS=48
-D ENV_INCLUDE_GPS=1
-D ENV_SKIP_GPS_DETECT=1
; Module-perspective names as on the Pro: PIN_GPS_TX is the ESP32's receive pin.
-D PIN_GPS_TX=2
-D PIN_GPS_RX=16
; No PIN_GPS_EN: the GPS supply is XL9555 line 2, switched by TDeckMaxGps.
-D GPS_BAUD_RATE=38400
; ES8311 speaker path (LilyGo T-Deck-MAX pinmap/docs, with the measured data-pin
; correction from GlomarGadaffi/tdeck-max-phone#34): MCLK 38, BCLK 39,
; LRCK/WS 18. The header names BOARD_ES8311_ASDOUT=40 / DSDIN=17 follow the
; codec's datasheet, but on hardware the ESP32 must drive GPIO40 for playback
; (LilyGo's own playWAV passes setPins(MCLK, SCLK, LRCK, ASDOUT, DSDIN) with
; the 4th/5th args as ESP32-side dout/din). So DOUT=40, SDIN=17. Amp and
; modem/codec mux are XL9555 lines 6/10, driven by TDeckMaxBoard.
-D PIN_I2S_MCLK=38
-D PIN_I2S_BCK=39
-D PIN_I2S_WS=18
-D PIN_I2S_DOUT=40
-D PIN_I2S_SDIN=17
-D ENV_INCLUDE_AHTX0=0
-D ENV_INCLUDE_BME280=0
-D ENV_INCLUDE_BMP280=0
-D ENV_INCLUDE_SHTC3=0
-D ENV_INCLUDE_SHT4X=0
-D ENV_INCLUDE_LPS22HB=0
-D ENV_INCLUDE_INA3221=0
-D ENV_INCLUDE_INA219=0
-D ENV_INCLUDE_INA226=0
-D ENV_INCLUDE_INA260=0
-D ENV_INCLUDE_MLX90614=0
-D ENV_INCLUDE_VL53L0X=0
-D ENV_INCLUDE_BME680=0
-D ENV_INCLUDE_BMP085=0
-D DISPLAY_CLASS=TDeckProDisplay
-D DISPLAY_ROTATION=0
-D DISPLAY_SCALE_X=1.0
-D DISPLAY_SCALE_Y=1.0
-D UI_LVGL=1
-D FIRMWARE_OTA_ENV='"LilyGo_TDeck_Max_companion_radio_touch"'
-D ENABLE_ADVERT_ON_BOOT=0
-D LV_CONF_PATH=lv_conf_tdeck_pro.h
-D LV_CONF_INCLUDE_SIMPLE=1
-D LV_MEMCPY_MEMSET_STD=1 ; newlib memcpy/memset in LVGL (see include/lv_conf.h)
-D MAX_CONTACTS=2000
-D MAX_GROUP_CHANNELS=40
-D ADMIN_PASSWORD='"password"'
-D MULTI_TRANSPORT_COMPANION=1
-D WADAMESH_FORK_BUILD=1
-D TCP_PORT=5000
-D WS_PORT=8765
-D BLE_PIN_CODE=123456
-D ENABLE_PRIVATE_KEY_IMPORT=1
-D ENABLE_PRIVATE_KEY_EXPORT=1
-D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
-D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
-D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
build_src_filter =
+<*.cpp>
+<*.c>
+<helpers/*.cpp>
+<helpers/esp32/*.cpp>
+<helpers/input/*.cpp>
-<helpers/input/TDeckTouch.cpp>
+<helpers/ui/UIColorPalette.cpp>
+<ui-touch/*.cpp>
+<ui-touch/*.c>
+<../variants/lilygo_tdeck_max/*.cpp>
+<../variants/lilygo_tdeck_pro/TDeckProDisplay.cpp>
+<../variants/lilygo_tdeck_pro/TDeckProTouch.cpp>
+<../variants/lilygo_tlora_pager/Es8311Codec.cpp> ; shared ES8311 DAC driver (Max speaker path)
lib_deps =
https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.18.0
SPI
Wire
SD
jgromes/RadioLib @ ^7.6.0
rweather/Crypto @ ^0.4.0
adafruit/RTClib @ ^2.1.3
melopero/Melopero RV3028 @ ^1.1.0
electroniccats/CayenneLPP @ 1.6.1
h2zero/NimBLE-Arduino @ 1.4.3
stevemarple/MicroNMEA @ ^2.0.6
adafruit/Adafruit TCA8418 @ ^1.0.2
lovyan03/LovyanGFX @ 1.2.21
lewisxhe/SensorLib @ 0.3.3
zinggjm/GxEPD2 @ 1.6.9
https://github.com/CIRCUITSTATE/CSE_Touch/archive/b44f23b6f870b848f1fbe453c190879bc6cfaafa.zip
https://github.com/CIRCUITSTATE/CSE_CST328/archive/refs/tags/v0.0.4.zip
ESP32Async/ESPAsyncWebServer @ 3.10.3
file://arch/esp32/AsyncElegantOTA
lvgl/lvgl @ ^8.3.11
densaugeo/base64 @ ~1.4.0
knolleary/PubSubClient @ ^2.8.0
; ======================================================================
; Seeed Wio Tracker L2 — touch-first ESP32-S3 target with quad-SPI display and SX1262.
; ======================================================================
[env:wio_tracker_l2_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = wio_tracker_l2
monitor_speed = 115200
upload_speed = 921600
board_build.arduino.memory_type = qio_opi
board_build.flash_size = 16MB
board_upload.flash_size = 16MB
board_upload.maximum_size = 16777216
board_build.partitions = partitions_tft_touch.csv
extra_scripts = pre:scripts/build/pre_gen_baked.py, pre:scripts/inject_wifi_env.py, pre:scripts/build/patch_lvgl_anim_uaf.py, pre:scripts/build/patch_lvgl_arabic.py, pre:scripts/build/patch_lgfx_dmadesc.py, pre:scripts/build/perf_lvgl.py, merge-bin.py
custom_lvgl_o2 = yes ; LVGL at -O2 (scripts/build/perf_lvgl.py), like the T-Deck
custom_lvgl_iram = lv_draw_sw_blend.c, lv_draw_label.c ; their hot loops in IRAM, paid by the band in PSRAM
build_unflags =
-std=gnu++11
build_flags =
-I"${platformio.libdeps_dir}/${this.__env__}/MicroNMEA/src"
-I"${platformio.libdeps_dir}/${this.__env__}/Adafruit ADS1X15"
-I"${platformio.libdeps_dir}/${this.__env__}/LovyanGFX/src"
-I variants/wio_tracker_l2
-I include
-I src
-I src/ui-touch
-Wno-deprecated-declarations
-Wno-unused-parameter
-std=gnu++17
-DNDEBUG
-DRADIOLIB_STATIC_ONLY=1
-DRADIOLIB_GODMODE=1
-D MC_VENDORED_TOUCH_APP
-D ESP32_PLATFORM
-D HAS_WIO_TRACKER_L2=1
-D BOARD_HAS_PSRAM=1
-D ESP32_CPU_FREQ=240
-D CORE_DEBUG_LEVEL=0
-D LORA_FREQ=869.618
-D LORA_BW=62.5
-D LORA_SF=8
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22
-D P_LORA_NSS=21
-D P_LORA_RESET=7
-D P_LORA_DIO_1=9
-D P_LORA_BUSY=8
-D P_LORA_SCLK=4
-D P_LORA_MISO=5
-D P_LORA_MOSI=6
-D SX126X_DIO2_AS_RF_SWITCH=true
-D SX126X_DIO3_TCXO_VOLTAGE=1.8
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D RADIOLIB_EXCLUDE_CC1101=1
-D RADIOLIB_EXCLUDE_RF69=1
-D RADIOLIB_EXCLUDE_SX1231=1
-D RADIOLIB_EXCLUDE_SI443X=1
-D RADIOLIB_EXCLUDE_RFM2X=1
-D RADIOLIB_EXCLUDE_SX128X=1
-D RADIOLIB_EXCLUDE_AFSK=1
-D RADIOLIB_EXCLUDE_AX25=1
-D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
-D RADIOLIB_EXCLUDE_MORSE=1
-D RADIOLIB_EXCLUDE_APRS=1
-D RADIOLIB_EXCLUDE_BELL=1
-D RADIOLIB_EXCLUDE_RTTY=1
-D RADIOLIB_EXCLUDE_SSTV=1
-D ENV_INCLUDE_GPS=1
-D ENV_SKIP_GPS_DETECT=1
-D ENV_INCLUDE_AHTX0=0
-D ENV_INCLUDE_BME280=0
-D ENV_INCLUDE_BMP280=0
-D ENV_INCLUDE_SHTC3=0
-D ENV_INCLUDE_SHT4X=0
-D ENV_INCLUDE_LPS22HB=0
-D ENV_INCLUDE_INA3221=0
-D ENV_INCLUDE_INA219=0
-D ENV_INCLUDE_INA226=0
-D ENV_INCLUDE_INA260=0
-D ENV_INCLUDE_MLX90614=0
-D ENV_INCLUDE_VL53L0X=0
-D ENV_INCLUDE_BME680=0
-D ENV_INCLUDE_BMP085=0
; NAMING TRAP (same one as the V4-R8 and Pager envs above): the core calls
; Serial1.setPins(PIN_GPS_TX, PIN_GPS_RX) and Arduino's setPins() takes
; (rxPin, txPin) -- so PIN_GPS_TX is the pin WE RECEIVE ON, and PIN_GPS_RX is
; the pin we transmit on. These were 18/17 (copied from the Attaky env during
; bring-up, never checked against this board), which left the UART listening on
; GPIO17 while the module talks on GPIO18 -- GPS never produced a fix.
; Confirmed by WIO_TRACKER_L2_GPS_PROBE: NMEA on GPIO18 at 9600 (9 sats in view),
; GPIO17 silent at 9600/38400/115200.
-D PIN_GPS_TX=18
-D PIN_GPS_RX=17
-D GPS_BAUD_RATE=9600
; TEMP DIAGNOSTIC, disarmed now that the wiring is confirmed. Uncomment to
; re-run the pin/baud sweep; the block it gates lives in src/main.cpp.
; -D WIO_TRACKER_L2_GPS_PROBE=1
-D PIN_BOARD_SDA=47
-D PIN_BOARD_SCL=48
-D PIN_USER_BTN=0
-D PIN_TFT_LEDA_CTL=-1
-D PIN_TFT_RST=-1
-D PIN_TFT_DC=-1
-D DISPLAY_CLASS=WioTrackerL2Display
-D DISPLAY_ROTATION=0
-D DISPLAY_SCALE_X=1.0
-D DISPLAY_SCALE_Y=1.0
-D UI_LVGL=1
-D HAS_TOUCH_UI=1
-D FIRMWARE_OTA_ENV='"wio_tracker_l2_companion_radio_touch"'
-D ENABLE_ADVERT_ON_BOOT=0
-D LV_CONF_PATH=lv_conf.h
-D LV_CONF_INCLUDE_SIMPLE=1
-D LV_MEMCPY_MEMSET_STD=1 ; newlib memcpy/memset in LVGL (see include/lv_conf.h)
-D MAX_CONTACTS=2000
-D MAX_GROUP_CHANNELS=40
-D ADMIN_PASSWORD='"password"'
-D MULTI_TRANSPORT_COMPANION=1
-D WADAMESH_FORK_BUILD=1
-D TCP_PORT=5000
-D WS_PORT=8765
-D BLE_PIN_CODE=123456
-D ENABLE_PRIVATE_KEY_IMPORT=1
-D ENABLE_PRIVATE_KEY_EXPORT=1
-D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
-D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
-D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
build_src_filter =
+<*.cpp>
+<*.c>
+<helpers/*.cpp>
+<helpers/esp32/*.cpp>
+<helpers/input/*.cpp>
-<helpers/input/TDeckTouch.cpp>
+<helpers/ui/UIColorPalette.cpp>
+<ui-touch/*.cpp>
+<ui-touch/*.c>
+<../variants/wio_tracker_l2/*.cpp>
lib_deps =
https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.18.0
SPI
Wire
SD_MMC
jgromes/RadioLib @ ^7.6.0
rweather/Crypto @ ^0.4.0
adafruit/RTClib @ ^2.1.3
melopero/Melopero RV3028 @ ^1.1.0
electroniccats/CayenneLPP @ 1.6.1
h2zero/NimBLE-Arduino @ 1.4.3
adafruit/Adafruit ADS1X15 @ 2.6.2
stevemarple/MicroNMEA @ ^2.0.6
ESP32Async/ESPAsyncWebServer @ 3.10.3
file://arch/esp32/AsyncElegantOTA
lvgl/lvgl @ ^8.3.11
lovyan03/LovyanGFX @ 1.2.27
densaugeo/base64 @ ~1.4.0
knolleary/PubSubClient @ ^2.8.0
; Elecrow CrowPanel Advance 3.5 — ESP32-S3, ILI9488/GT911 and SX1262 expansion.
; ======================================================================
[env:crowpanel_35_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = crowpanel_35
monitor_speed = 115200
upload_speed = 921600
board_build.arduino.memory_type = qio_opi
board_build.flash_size = 16MB
board_upload.flash_size = 16MB
board_upload.maximum_size = 16777216
board_build.partitions = partitions_tft_touch.csv
extra_scripts = pre:scripts/build/pre_gen_baked.py, pre:scripts/inject_wifi_env.py, pre:scripts/build/patch_lvgl_anim_uaf.py, pre:scripts/build/patch_lvgl_arabic.py, pre:scripts/build/patch_lgfx_dmadesc.py, pre:scripts/build/perf_lvgl.py, merge-bin.py
custom_lvgl_o2 = yes ; LVGL at -O2 (scripts/build/perf_lvgl.py), like the T-Deck
custom_lvgl_iram = lv_draw_sw_blend.c, lv_draw_label.c ; their hot loops in IRAM, paid by the band in PSRAM
build_unflags =
-std=gnu++11
build_flags =
-I"${platformio.libdeps_dir}/${this.__env__}/MicroNMEA/src"
-I"${platformio.libdeps_dir}/${this.__env__}/LovyanGFX/src"
-I variants/crowpanel_35
-I include
-I src
-I src/ui-touch
-Wno-deprecated-declarations
-Wno-unused-parameter
-std=gnu++17
-DNDEBUG
-DRADIOLIB_STATIC_ONLY=1
-DRADIOLIB_GODMODE=1
-D MC_VENDORED_TOUCH_APP
-D ESP32_PLATFORM
-D HAS_CROWPANEL_35=1
-D BOARD_HAS_PSRAM=1
-D ESP32_CPU_FREQ=240
-D CORE_DEBUG_LEVEL=0
-D LORA_FREQ=869.618
-D LORA_BW=62.5
-D LORA_SF=8
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22
; GPIO0 is shared by BOOT and LoRa chip select; leave the wake input disabled.
-D P_LORA_NSS=0
-D P_LORA_RESET=2
-D P_LORA_DIO_1=1
-D P_LORA_BUSY=46
-D P_LORA_SCLK=10
-D P_LORA_MISO=9
-D P_LORA_MOSI=3
-D SX126X_DIO2_AS_RF_SWITCH=true
-D SX126X_DIO3_TCXO_VOLTAGE=3.3
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D RADIOLIB_EXCLUDE_CC1101=1
-D RADIOLIB_EXCLUDE_RF69=1
-D RADIOLIB_EXCLUDE_SX1231=1
-D RADIOLIB_EXCLUDE_SI443X=1
-D RADIOLIB_EXCLUDE_RFM2X=1
-D RADIOLIB_EXCLUDE_SX128X=1
-D RADIOLIB_EXCLUDE_AFSK=1
-D RADIOLIB_EXCLUDE_AX25=1
-D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
-D RADIOLIB_EXCLUDE_MORSE=1
-D RADIOLIB_EXCLUDE_APRS=1
-D RADIOLIB_EXCLUDE_BELL=1
-D RADIOLIB_EXCLUDE_RTTY=1
-D RADIOLIB_EXCLUDE_SSTV=1
-D ENV_INCLUDE_GPS=1
-D ENV_INCLUDE_AHTX0=0
-D ENV_INCLUDE_BME280=0
-D ENV_INCLUDE_BMP280=0
-D ENV_INCLUDE_SHTC3=0
-D ENV_INCLUDE_SHT4X=0
-D ENV_INCLUDE_LPS22HB=0
-D ENV_INCLUDE_INA3221=0
-D ENV_INCLUDE_INA219=0
-D ENV_INCLUDE_INA226=0
-D ENV_INCLUDE_INA260=0
-D ENV_INCLUDE_MLX90614=0
-D ENV_INCLUDE_VL53L0X=0
-D ENV_INCLUDE_BME680=0
-D ENV_INCLUDE_BMP085=0
; Core calls Serial1.setPins(PIN_GPS_TX, PIN_GPS_RX), i.e. (ESP RX, ESP TX).
-D PIN_GPS_TX=18
-D PIN_GPS_RX=17
-D GPS_BAUD_RATE=9600
-D PIN_BOARD_SDA=15
-D PIN_BOARD_SCL=16
; Software-SPI SD: the radio and display already occupy both SPI hosts.
-D PIN_SD_CS=7
-D PIN_SD_SCLK=5
-D PIN_SD_MISO=4
-D PIN_SD_MOSI=6
-D DISPLAY_CLASS=CrowPanel35Display
-D DISPLAY_ROTATION=3
-D DISPLAY_SCALE_X=1.0
-D DISPLAY_SCALE_Y=1.0
-D UI_LVGL=1
-D HAS_TOUCH_UI=1
-D FIRMWARE_OTA_ENV='"crowpanel_35_companion_radio_touch"'
-D ENABLE_ADVERT_ON_BOOT=0
-D LV_CONF_PATH=lv_conf.h
-D LV_CONF_INCLUDE_SIMPLE=1
-D LV_MEMCPY_MEMSET_STD=1 ; newlib memcpy/memset in LVGL (see include/lv_conf.h)
-D MAX_CONTACTS=2000
-D MAX_GROUP_CHANNELS=40
-D ADMIN_PASSWORD='"password"'
-D MULTI_TRANSPORT_COMPANION=1
-D WADAMESH_FORK_BUILD=1
-D TCP_PORT=5000
-D WS_PORT=8765
-D BLE_PIN_CODE=123456
-D ENABLE_PRIVATE_KEY_IMPORT=1
-D ENABLE_PRIVATE_KEY_EXPORT=1
-D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
-D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
-D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
build_src_filter =
+<*.cpp>
+<*.c>
+<helpers/*.cpp>
+<helpers/esp32/*.cpp>
+<helpers/input/*.cpp>
-<helpers/input/TDeckTouch.cpp>
+<helpers/ui/UIColorPalette.cpp>
+<ui-touch/*.cpp>
+<ui-touch/*.c>
+<../variants/crowpanel_35/*.cpp>
lib_deps =
https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.18.0
SPI
Wire
SD
jgromes/RadioLib @ ^7.6.0
rweather/Crypto @ ^0.4.0
adafruit/RTClib @ ^2.1.3
melopero/Melopero RV3028 @ ^1.1.0
electroniccats/CayenneLPP @ 1.6.1
h2zero/NimBLE-Arduino @ 1.4.3
stevemarple/MicroNMEA @ ^2.0.6
ESP32Async/ESPAsyncWebServer @ 3.10.3
file://arch/esp32/AsyncElegantOTA
lvgl/lvgl @ ^8.3.11
lovyan03/LovyanGFX @ 1.2.27
densaugeo/base64 @ ~1.4.0
knolleary/PubSubClient @ ^2.8.0
; Elecrow CrowPanel Advance 5.0 — ESP32-S3, 800x480 ST7262 RGB panel, GT911 and
; SX1262 in the wireless slot. Board quirks follow Camillia-MT; see DEVICES.md.
; ======================================================================
[env:crowpanel_50_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = crowpanel_50
monitor_speed = 115200
upload_speed = 921600
board_build.arduino.memory_type = qio_opi
board_build.flash_size = 16MB
board_upload.flash_size = 16MB
board_upload.maximum_size = 16777216
board_build.partitions = partitions_tft_touch.csv
extra_scripts = pre:scripts/build/pre_gen_baked.py, pre:scripts/inject_wifi_env.py, pre:scripts/build/patch_lvgl_anim_uaf.py, pre:scripts/build/patch_lvgl_arabic.py, pre:scripts/build/patch_lgfx_dmadesc.py, pre:scripts/build/perf_lvgl.py, merge-bin.py
custom_lvgl_o2 = yes ; LVGL at -O2 (scripts/build/perf_lvgl.py), like the T-Deck
custom_lvgl_iram = lv_draw_sw_blend.c, lv_draw_label.c ; their hot loops in IRAM
build_unflags =
-std=gnu++11
build_flags =
-I"${platformio.libdeps_dir}/${this.__env__}/MicroNMEA/src"
-I"${platformio.libdeps_dir}/${this.__env__}/LovyanGFX/src"
-I variants/crowpanel_50
-I include
-I src
-I src/ui-touch
-Wno-deprecated-declarations
-Wno-unused-parameter
-std=gnu++17
-DNDEBUG
-DRADIOLIB_STATIC_ONLY=1
-DRADIOLIB_GODMODE=1
-D MC_VENDORED_TOUCH_APP
-D ESP32_PLATFORM
-D HAS_CROWPANEL_50=1
-D BOARD_HAS_PSRAM=1
-D ESP32_CPU_FREQ=240
-D CORE_DEBUG_LEVEL=0
-D LORA_FREQ=869.618
-D LORA_BW=62.5
-D LORA_SF=8
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22
; SX1262 in the J8/J9 wireless slot. The function DIP switch on the back must
; select the wireless module (S1=0, S0=1); its other positions hand these pins
; to the SD card or the speaker/microphone. CS is GPIO8 on V1.2/V1.3 boards
; (current production); V1.0 boards wire it to GPIO0 and need P_LORA_NSS=0.
-D P_LORA_NSS=8
-D P_LORA_RESET=19
-D P_LORA_DIO_1=20
-D P_LORA_BUSY=2
-D P_LORA_SCLK=5
-D P_LORA_MISO=4
-D P_LORA_MOSI=6
-D SX126X_DIO2_AS_RF_SWITCH=true
-D SX126X_DIO3_TCXO_VOLTAGE=3.3
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D RADIOLIB_EXCLUDE_CC1101=1
-D RADIOLIB_EXCLUDE_RF69=1
-D RADIOLIB_EXCLUDE_SX1231=1
-D RADIOLIB_EXCLUDE_SI443X=1
-D RADIOLIB_EXCLUDE_RFM2X=1
-D RADIOLIB_EXCLUDE_SX128X=1
-D RADIOLIB_EXCLUDE_AFSK=1
-D RADIOLIB_EXCLUDE_AX25=1
-D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
-D RADIOLIB_EXCLUDE_MORSE=1
-D RADIOLIB_EXCLUDE_APRS=1
-D RADIOLIB_EXCLUDE_BELL=1
-D RADIOLIB_EXCLUDE_RTTY=1
-D RADIOLIB_EXCLUDE_SSTV=1
-D ENV_INCLUDE_GPS=0
-D ENV_INCLUDE_AHTX0=0
-D ENV_INCLUDE_BME280=0
-D ENV_INCLUDE_BMP280=0
-D ENV_INCLUDE_SHTC3=0
-D ENV_INCLUDE_SHT4X=0
-D ENV_INCLUDE_LPS22HB=0
-D ENV_INCLUDE_INA3221=0
-D ENV_INCLUDE_INA219=0
-D ENV_INCLUDE_INA226=0
-D ENV_INCLUDE_INA260=0
-D ENV_INCLUDE_MLX90614=0
-D ENV_INCLUDE_VL53L0X=0
-D ENV_INCLUDE_BME680=0
-D ENV_INCLUDE_BMP085=0
-D PIN_BOARD_SDA=15
-D PIN_BOARD_SCL=16
; No GPS, SD card, battery gauge or spare button: the 16-bit RGB panel takes
; most GPIOs and the DIP switch gives the rest to the radio.
-D DISPLAY_CLASS=CrowPanel50Display
; Stop the LCD clock during flash writes so the picture doesn't jump sideways
; (variants/crowpanel_50/FlashPanelPause.cpp).
-D CROWPANEL50_FLASH_PAUSE
-Wl,--wrap=esp_flash_write
-Wl,--wrap=esp_flash_erase_region
-D DISPLAY_ROTATION=3
-D DISPLAY_SCALE_X=1.0
-D DISPLAY_SCALE_Y=1.0
-D UI_LVGL=1
-D HAS_TOUCH_UI=1
-D FIRMWARE_OTA_ENV='"crowpanel_50_companion_radio_touch"'
-D ENABLE_ADVERT_ON_BOOT=0
-D LV_CONF_PATH=lv_conf.h
-D LV_CONF_INCLUDE_SIMPLE=1
-D LV_MEMCPY_MEMSET_STD=1 ; newlib memcpy/memset in LVGL (see include/lv_conf.h)
-D MAX_CONTACTS=2000
-D MAX_GROUP_CHANNELS=40
-D ADMIN_PASSWORD='"password"'
-D MULTI_TRANSPORT_COMPANION=1
-D WADAMESH_FORK_BUILD=1
-D TCP_PORT=5000
-D WS_PORT=8765
-D BLE_PIN_CODE=123456
-D ENABLE_PRIVATE_KEY_IMPORT=1
-D ENABLE_PRIVATE_KEY_EXPORT=1
-D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
-D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
-D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
build_src_filter =
+<*.cpp>
+<*.c>
+<helpers/*.cpp>
+<helpers/esp32/*.cpp>
+<helpers/input/*.cpp>
-<helpers/input/TDeckTouch.cpp>
+<helpers/ui/UIColorPalette.cpp>
+<ui-touch/*.cpp>
+<ui-touch/*.c>
+<../variants/crowpanel_50/*.cpp>
lib_deps =
https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.18.0
SPI
Wire
SD
jgromes/RadioLib @ ^7.6.0
rweather/Crypto @ ^0.4.0
adafruit/RTClib @ ^2.1.3
melopero/Melopero RV3028 @ ^1.1.0
electroniccats/CayenneLPP @ 1.6.1
h2zero/NimBLE-Arduino @ 1.4.3
stevemarple/MicroNMEA @ ^2.0.6
ESP32Async/ESPAsyncWebServer @ 3.10.3
file://arch/esp32/AsyncElegantOTA
lvgl/lvgl @ ^8.3.11
lovyan03/LovyanGFX @ 1.2.27
densaugeo/base64 @ ~1.4.0
knolleary/PubSubClient @ ^2.8.0
; ======================================================================
; Seeed SenseCAP Indicator D1L — 480x480 RGB touch panel, SX1262 behind a TCA9535.
; The radio's NSS/RESET/BUSY/DIO1 are expander pins; P_LORA_* 0x40..0x43 are
; virtual pin numbers the radio HAL maps onto them. 8 MB flash, two OTA slots.
; ======================================================================
[env:sensecap_indicator_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = sensecap_indicator
monitor_speed = 115200
upload_speed = 921600
board_build.arduino.memory_type = qio_opi
board_build.flash_size = 8MB
board_upload.flash_size = 8MB
board_upload.maximum_size = 8388608
board_build.partitions = variants/sensecap_indicator/partitions_sensecap_indicator.csv
extra_scripts = pre:scripts/build/pre_gen_baked.py, pre:scripts/inject_wifi_env.py, pre:scripts/build/patch_lvgl_anim_uaf.py, pre:scripts/build/patch_lvgl_arabic.py, pre:scripts/build/patch_meshcore_txt_timestamp.py, pre:scripts/build/perf_lvgl.py, merge-bin.py
custom_lvgl_o2 = yes ; LVGL at -O2 (scripts/build/perf_lvgl.py), like the T-Deck
; No custom_lvgl_iram: it costs +5.9 KB IRAM, and with this board's 23 KB internal draw
; band (see UITask::begin) that would leave less internal heap than the T-Deck's.
build_unflags =
-std=gnu++11
build_flags =
-I"${platformio.libdeps_dir}/${this.__env__}/MicroNMEA/src"
-I"${platformio.libdeps_dir}/${this.__env__}/LovyanGFX/src"
-I variants/sensecap_indicator
-I include
-I src
-I src/ui-touch
-Wno-deprecated-declarations
-Wno-unused-parameter
-std=gnu++17
-DNDEBUG
-DRADIOLIB_STATIC_ONLY=1
-DRADIOLIB_GODMODE=1
-D MC_VENDORED_TOUCH_APP
-D ESP32_PLATFORM
-D HAS_SENSECAP_INDICATOR=1
-D BOARD_HAS_PSRAM=1
-D ESP32_CPU_FREQ=240
-D CORE_DEBUG_LEVEL=0
-D LORA_FREQ=869.618
-D LORA_BW=62.5
-D LORA_SF=8
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22
-D P_LORA_NSS=0x40
-D P_LORA_RESET=0x41
-D P_LORA_BUSY=0x42
-D P_LORA_DIO_1=0x43
-D P_LORA_SCLK=41
-D P_LORA_MISO=47
-D P_LORA_MOSI=48
-D SX126X_DIO2_AS_RF_SWITCH=true
; The radio strap picks TCXO (2.4 V) or crystal at run time. The inner quotes
; keep the parentheses away from the shell that runs the compiler.
-D SX126X_DIO3_TCXO_VOLTAGE="'indicatorTcxoVoltage()'"
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D INDICATOR_PCLK_HZ=12000000
-D RADIOLIB_EXCLUDE_CC1101=1
-D RADIOLIB_EXCLUDE_RF69=1
-D RADIOLIB_EXCLUDE_SX1231=1
-D RADIOLIB_EXCLUDE_SI443X=1
-D RADIOLIB_EXCLUDE_RFM2X=1
-D RADIOLIB_EXCLUDE_SX128X=1
-D RADIOLIB_EXCLUDE_AFSK=1
-D RADIOLIB_EXCLUDE_AX25=1
-D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
-D RADIOLIB_EXCLUDE_MORSE=1
-D RADIOLIB_EXCLUDE_APRS=1
-D RADIOLIB_EXCLUDE_BELL=1
-D RADIOLIB_EXCLUDE_RTTY=1
-D RADIOLIB_EXCLUDE_SSTV=1
-D ENV_INCLUDE_GPS=0
-D ENV_INCLUDE_AHTX0=0
-D ENV_INCLUDE_BME280=0
-D ENV_INCLUDE_BMP280=0
-D ENV_INCLUDE_SHTC3=0
-D ENV_INCLUDE_SHT4X=0
-D ENV_INCLUDE_LPS22HB=0
-D ENV_INCLUDE_INA3221=0
-D ENV_INCLUDE_INA219=0
-D ENV_INCLUDE_INA226=0
-D ENV_INCLUDE_INA260=0
-D ENV_INCLUDE_MLX90614=0
-D ENV_INCLUDE_VL53L0X=0
-D ENV_INCLUDE_BME680=0
-D ENV_INCLUDE_BMP085=0
-D PIN_BOARD_SDA=39
-D PIN_BOARD_SCL=40
-D PIN_USER_BTN=38
-D PIN_TFT_LEDA_CTL=-1
-D PIN_TFT_RST=-1
-D PIN_TFT_DC=-1
-D DISPLAY_CLASS=IndicatorDisplay
-D DISPLAY_ROTATION=0
-D DISPLAY_SCALE_X=1.0
-D DISPLAY_SCALE_Y=1.0
-D UI_LVGL=1
-D HAS_TOUCH_UI=1
-D FIRMWARE_OTA_ENV='"sensecap_indicator_companion_radio_touch"'
-D ENABLE_ADVERT_ON_BOOT=0
-D LV_CONF_PATH=lv_conf.h
-D LV_CONF_INCLUDE_SIMPLE=1
-D LV_MEMCPY_MEMSET_STD=1 ; newlib memcpy/memset in LVGL (see include/lv_conf.h)
; The UI-size presets use Montserrat 18/20/24. Those are generated fonts
; (src/ui-touch/ui_font_NN.c, gated on this board's macro in the generator), not
; LVGL's: never force LV_FONT_MONTSERRAT_NN=1 here, it would link LVGL's copy too.
-D MAX_CONTACTS=2000
-D MAX_GROUP_CHANNELS=40
-D ADMIN_PASSWORD='"password"'
-D MULTI_TRANSPORT_COMPANION=1
-D WADAMESH_FORK_BUILD=1
-D TCP_PORT=5000
-D WS_PORT=8765
-D BLE_PIN_CODE=123456
-D ENABLE_PRIVATE_KEY_IMPORT=1
-D ENABLE_PRIVATE_KEY_EXPORT=1
-D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
-D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
-D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
build_src_filter =
+<*.cpp>
+<*.c>
+<helpers/*.cpp>
+<helpers/esp32/*.cpp>
+<helpers/input/*.cpp>
-<helpers/input/TDeckTouch.cpp>
+<helpers/ui/UIColorPalette.cpp>
+<ui-touch/*.cpp>
+<ui-touch/*.c>
+<../variants/sensecap_indicator/*.cpp>
lib_deps =
https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.18.0
SPI
Wire
SD_MMC
jgromes/RadioLib @ ^7.6.0
rweather/Crypto @ ^0.4.0
adafruit/RTClib @ ^2.1.3
melopero/Melopero RV3028 @ ^1.1.0
electroniccats/CayenneLPP @ 1.6.1
h2zero/NimBLE-Arduino @ 1.4.3
stevemarple/MicroNMEA @ ^2.0.6
ESP32Async/ESPAsyncWebServer @ 3.10.3
file://arch/esp32/AsyncElegantOTA
lvgl/lvgl @ ^8.3.11
lovyan03/LovyanGFX @ 1.2.27
densaugeo/base64 @ ~1.4.0
knolleary/PubSubClient @ ^2.8.0
[env:tlora_pager_lr1121_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = lilygo-t-lora-pager
monitor_speed = 115200
board_build.partitions = variants/lilygo_tlora_pager/partitions_tlora_pager_touch.csv
extra_scripts = pre:scripts/build/pre_gen_baked.py, pre:scripts/inject_wifi_env.py, pre:scripts/build/patch_lvgl_anim_uaf.py, pre:scripts/build/patch_lvgl_arabic.py, pre:scripts/build/patch_meshcore_txt_timestamp.py, pre:scripts/build/patch_nimble_freertos_timer.py, pre:scripts/build/perf_lvgl.py, merge-bin.py
custom_lvgl_o2 = yes ; LVGL at -O2 (scripts/build/perf_lvgl.py): measured 5-12% less a frame on the Pager
custom_lvgl_iram = lv_draw_sw_blend.c, lv_draw_label.c ; their hot loops in IRAM (~7 KB internal RAM with -O2), paid by the band in PSRAM
build_flags =
; 1.17 core: ESP32Board.cpp includes <target.h> -> MicroNMEALocationProvider.h (header-only
; provider), so MicroNMEA never chains into the core lib's LDF scope -- hand it the path.
-I"${platformio.libdeps_dir}/${this.__env__}/MicroNMEA/src"
-I"${platformio.libdeps_dir}/${this.__env__}/SensorLib/src" ; same: TLoraPagerBoard.h needs XL9555/BQ27220
-I"${platformio.libdeps_dir}/${this.__env__}/TFT_eSPI" ; same: pager target.h -> ST7796LCDDisplay.h -> TFT_eSPI.h
-Wno-deprecated-declarations -Wno-unused-parameter -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
-D MC_VENDORED_TOUCH_APP
-D LORA_FREQ=869.618
-D LORA_BW=62.5
-D LORA_SF=8
-D ENABLE_PRIVATE_KEY_IMPORT=1
-D ENABLE_PRIVATE_KEY_EXPORT=1
-D RADIOLIB_EXCLUDE_CC1101=1
-D RADIOLIB_EXCLUDE_RF69=1
-D RADIOLIB_EXCLUDE_SX1231=1
-D RADIOLIB_EXCLUDE_SI443X=1
-D RADIOLIB_EXCLUDE_RFM2X=1
-D RADIOLIB_EXCLUDE_SX128X=1
-D RADIOLIB_EXCLUDE_AFSK=1
-D RADIOLIB_EXCLUDE_AX25=1
-D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
-D RADIOLIB_EXCLUDE_MORSE=1
-D RADIOLIB_EXCLUDE_APRS=1
-D RADIOLIB_EXCLUDE_BELL=1
-D RADIOLIB_EXCLUDE_RTTY=1
-D RADIOLIB_EXCLUDE_SSTV=1
; LR11X0 stays IN (that's our radio family); SX126X isn't used by this env at all.
-D RADIOLIB_EXCLUDE_SX126X=1
-D ESP32_PLATFORM
; --- T-LoRa Pager board ---
-I variants/lilygo_tlora_pager
-D TLORA_PAGER=1
-D BOARD_HAS_PSRAM=1
; 0 = silence ARDUHAL [E] spam, same rationale as the other two envs.
-D CORE_DEBUG_LEVEL=0
-D ARDUINO_USB_CDC_ON_BOOT=1
-D PIN_USER_BTN=0
-D USE_LR1121=1
-D RADIO_CLASS=CustomLR1121
-D WRAPPER_CLASS=CustomLR1121Wrapper
; Full sub-GHz HP-PA power on boot, matching the T-Deck's own LORA_TX_POWER=22
; (not Heltec V4's conservative-10-then-raise-in-Settings pattern). +22dBm is
; this chip's real ceiling for freq < 1GHz -- confirmed against RadioLib's
; pinned LR1120::checkOutputPower() (LR1121 inherits it: HP PA auto-selects
; above 14dBm, valid range -9..22) and trail-mate's own
; TRAIL_MATE_LORA_TX_POWER_MAX_DBM=22 for this exact board -- not a guess
; carried over from the sibling boards. A weak default here (10dBm, ~16x less
; power) was silently degrading outbound range on real hardware: adverts/DMs
; sent FROM the pager were unreliable while inbound reception was fine, since
; the far node's own TX was unaffected.
-D LORA_TX_POWER=22
-D P_LORA_DIO_1=14
-D P_LORA_NSS=36
-D P_LORA_RESET=47
-D P_LORA_BUSY=48
-D P_LORA_SCLK=35
-D P_LORA_MISO=33
-D P_LORA_MOSI=34
-D ENV_INCLUDE_GPS=1
-D ENV_SKIP_GPS_DETECT=1
-D ENV_INCLUDE_AHTX0=0
-D ENV_INCLUDE_BME280=0
-D ENV_INCLUDE_BMP280=0
-D ENV_INCLUDE_SHTC3=0
-D ENV_INCLUDE_SHT4X=0
-D ENV_INCLUDE_LPS22HB=0
-D ENV_INCLUDE_INA3221=0
-D ENV_INCLUDE_INA219=0
-D ENV_INCLUDE_INA226=0
-D ENV_INCLUDE_INA260=0
-D ENV_INCLUDE_MLX90614=0
-D ENV_INCLUDE_VL53L0X=0
-D ENV_INCLUDE_BME680=0
-D ENV_INCLUDE_BMP085=0
-D DISPLAY_SCALE_X=1.0
-D DISPLAY_SCALE_Y=1.0
; AW9364 backlight enable/pulse pin (ST7796LCDDisplay owns brightness -- see
; the CGRAM_OFFSET comment below for why this isn't a plain PWM pin).
-D PIN_TFT_LEDA_CTL=42
; Swapped vs. trail-mate's raw GPS_RX=4/GPS_TX=12: wadamesh's core calls
; Serial1.setPins(PIN_GPS_TX, PIN_GPS_RX), and HardwareSerial::setPins()
; takes (rxPin, txPin) -- so PIN_GPS_TX must be the ESP's own RX pin (4) and
; PIN_GPS_RX the ESP's own TX pin (12). See TLORA_PAGER_PORT.md Risk 1c.
-D PIN_GPS_RX=12
-D PIN_GPS_TX=4
-D GPS_BAUD_RATE=38400
; --- touch UI / companion stack ---
-I include
-I src
-I src/ui-touch
-D UI_LVGL=1
-D HAS_TOUCH_UI=1
-D FIRMWARE_OTA_ENV='"tlora_pager_lr1121_companion_radio_touch"'
-D HAS_PAGER_KEYBOARD=1
-D HAS_PAGER_ENCODER=1
-D KB_INT=6
-D KB_BACKLIGHT=46
-D ROTARY_A=40
-D ROTARY_B=41
-D ROTARY_C=7
; ES8311 codec I2S pins (NS4150B amp downstream, enabled via XL9555
; AMP_EN -- see TLoraPagerBoard::setAmpEnabled()). Confirmed against the
; canonical arduino-esp32 pins_arduino.h for this board -- see
; TLORA_PAGER_PORT.md's Audio row.
-D PIN_I2S_MCLK=10
-D PIN_I2S_BCK=11
-D PIN_I2S_WS=18
-D PIN_I2S_DOUT=45
-D PIN_I2S_SDIN=17
-D ENABLE_ADVERT_ON_BOOT=0
-D LV_CONF_PATH=lv_conf.h
-D LV_CONF_INCLUDE_SIMPLE=1
-D LV_MEMCPY_MEMSET_STD=1 ; newlib memcpy/memset in LVGL (see include/lv_conf.h)
; Smoother scroll: lower deceleration than LVGL's default (10) so flicks glide
; longer instead of stopping abruptly. lv_conf leaves this unset, so this -D wins.
-D LV_INDEV_DEF_SCROLL_THROW=7
-D MAX_CONTACTS=2000
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=ST7796LCDDisplay
-D ADMIN_PASSWORD='"password"'
-D MULTI_TRANSPORT_COMPANION=1
-D WADAMESH_FORK_BUILD=1
-D TCP_PORT=5000
-D WS_PORT=8765
-D BLE_PIN_CODE=123456
-D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
-D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
-D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
; --- ST7796 display (TFT_eSPI) ---
-D USER_SETUP_LOADED=1
; USER_SETUP_LOADED bypasses TFT_eSPI's User_Setup.h, so opt the built-in
; 6x8 font back in explicitly. ST7796LCDDisplay's pre-LVGL text API uses
; font 1 for Remote UI URLs/buttons and fatal notices; without this define
; textWidth() returns 0 and print() draws nothing (bitmap/rects still work).
-D LOAD_GLCD=1
-D ST7796_DRIVER=1
; REQUIRED: this panel's 222px glass is narrower than the ST7796 controller's
; 320px GRAM. TFT_eSPI's ST7796_Rotation.h only applies the needed 49px
; column/row offset when this is defined (unlike ST7789, it isn't automatic
; for ST7796) -- ST7796LCDDisplay.cpp #errors at compile time without it.
-D CGRAM_OFFSET=1
; REQUIRED on ESP32-S3: TFT_eSPI_ESP32_S3.h's raw register macros (_spi_user,
; _spi_cmd, _spi_mosi_dlen -- used by begin_tft_write()/TFT_WRITE_BITS) take
; SPI_PORT and feed it straight into IDF's SPI_USER_REG(i)/REG_SPI_BASE(i),
; which only resolves to a real peripheral for i>=2 (SPI2/SPI3); i<2 returns
; base address 0. Leaving both USE_HSPI_PORT/USE_FSPI_PORT undefined makes
; that file fall back to SPI_PORT=FSPI, but FSPI is the *Arduino* enum value
; (0 on S3) rather than the raw IDF host index TFT_eSPI's own macros need --
; so _spi_user resolves to address 0x10, and the very first writecommand()
; in ST7796LCDDisplay::begin()/TFT_eSPI::init() hard-crashes with a
; StoreProhibited panic (confirmed on hardware: black screen, boot-looping
; "Guru Meditation Error" at TFT_eSPI::begin_tft_write()). USE_FSPI_PORT
; forces SPI_PORT=2 (real SPI2/"GPSPI2") consistently across both the raw
; macros and the SPIClass(FSPI) object TFT_eSPI constructs internally.
; USE_HSPI_PORT (real SPI3) is deliberately NOT used here instead: the
; radio's own `SPIClass spi` (variants/lilygo_tlora_pager/target.cpp) takes
; its default ctor arg (HSPI), which the Arduino core also maps to real
; SPI3 -- so picking HSPI for the display would put both peripherals on the
; same physical SPI host and conflict.
-D USE_FSPI_PORT=1
-D TFT_WIDTH=222
-D TFT_HEIGHT=480
-D TFT_MOSI=34
-D TFT_SCLK=35
-D TFT_CS=38
-D TFT_DC=37
-D TFT_RST=-1
-D TFT_MISO=33
-D TFT_BL=-1
; trail-mate's kPagerDisplaySpiClockMhz = 80.
-D SPI_FREQUENCY=80000000
build_src_filter =
+<*.cpp>
+<*.c>
+<helpers/*.cpp>
+<helpers/esp32/*.cpp>
+<helpers/input/*.cpp>
+<helpers/ui/*.cpp>
+<ui-touch/*.cpp>
+<ui-touch/*.c>
+<../variants/lilygo_tlora_pager/*.cpp>
lib_deps =
https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.18.0
SPI
Wire
jgromes/RadioLib @ ^7.6.0
rweather/Crypto @ ^0.4.0
adafruit/RTClib @ ^2.1.3
melopero/Melopero RV3028 @ ^1.1.0
electroniccats/CayenneLPP @ 1.6.1
h2zero/NimBLE-Arduino @ 1.4.3
adafruit/Adafruit INA3221 Library @ ^1.0.1
adafruit/Adafruit INA219 @ ^1.2.3
robtillaart/INA226 @ ^0.6.4
adafruit/Adafruit INA260 Library @ ^1.5.3
adafruit/Adafruit AHTX0 @ ^2.0.5
adafruit/Adafruit BME280 Library @ ^2.3.0
adafruit/Adafruit BMP280 Library @ ^2.6.8
adafruit/Adafruit SHTC3 Library @ ^1.0.1
sensirion/Sensirion I2C SHT4x @ ^1.1.2
arduino-libraries/Arduino_LPS22HB @ ^1.0.2
adafruit/Adafruit MLX90614 Library @ ^2.1.5
adafruit/Adafruit_VL53L0X @ ^1.2.4
stevemarple/MicroNMEA @ ^2.0.6
adafruit/Adafruit BME680 Library @ ^2.0.4
adafruit/Adafruit BMP085 Library @ ^1.2.4
ESP32Async/ESPAsyncWebServer @ 3.10.3
file://arch/esp32/AsyncElegantOTA
lvgl/lvgl @ ^8.3.11
densaugeo/base64 @ ~1.4.0
knolleary/PubSubClient @ ^2.8.0
bodmer/TFT_eSPI @ ^2.5.43
adafruit/Adafruit TCA8418 @ ^1.0.2
lewisxhe/SensorLib @ 0.3.3
; Milestone 10: SX1262-variant env for pager units sold with that radio instead
; of LR1121 -- same board JSON, same variant dir, same physical NSS/RESET/BUSY/
; DIO1/SCLK/MISO/MOSI pins (same PCB slot, just a different chip populated —
; see TLORA_PAGER_PORT.md's hardware-facts table). RADIO_CLASS/WRAPPER_CLASS
; swap to the core fork's CustomSX1262/CustomSX1262Wrapper, the exact same
; generic classes the T-Deck already uses -- see target.cpp's radio_init()
; for why no new radio C++ code was needed, just these build flags.
[env:tlora_pager_sx1262_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = lilygo-t-lora-pager
monitor_speed = 115200
board_build.partitions = variants/lilygo_tlora_pager/partitions_tlora_pager_touch.csv
extra_scripts = pre:scripts/build/pre_gen_baked.py, pre:scripts/inject_wifi_env.py, pre:scripts/build/patch_lvgl_anim_uaf.py, pre:scripts/build/patch_lvgl_arabic.py, pre:scripts/build/patch_meshcore_txt_timestamp.py, pre:scripts/build/patch_nimble_freertos_timer.py, pre:scripts/build/perf_lvgl.py, merge-bin.py
custom_lvgl_o2 = yes ; LVGL at -O2 (scripts/build/perf_lvgl.py): measured 5-12% less a frame on the Pager
custom_lvgl_iram = lv_draw_sw_blend.c, lv_draw_label.c ; their hot loops in IRAM (~7 KB internal RAM with -O2), paid by the band in PSRAM
build_flags =
; 1.17 core: ESP32Board.cpp includes <target.h> -> MicroNMEALocationProvider.h (header-only
; provider), so MicroNMEA never chains into the core lib's LDF scope -- hand it the path.
-I"${platformio.libdeps_dir}/${this.__env__}/MicroNMEA/src"
-I"${platformio.libdeps_dir}/${this.__env__}/SensorLib/src" ; same: TLoraPagerBoard.h needs XL9555/BQ27220
-I"${platformio.libdeps_dir}/${this.__env__}/TFT_eSPI" ; same: pager target.h -> ST7796LCDDisplay.h -> TFT_eSPI.h
-Wno-deprecated-declarations -Wno-unused-parameter -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
-D MC_VENDORED_TOUCH_APP
-D LORA_FREQ=869.618
-D LORA_BW=62.5
-D LORA_SF=8
-D ENABLE_PRIVATE_KEY_IMPORT=1
-D ENABLE_PRIVATE_KEY_EXPORT=1
-D RADIOLIB_EXCLUDE_CC1101=1
-D RADIOLIB_EXCLUDE_RF69=1
-D RADIOLIB_EXCLUDE_SX1231=1
-D RADIOLIB_EXCLUDE_SI443X=1
-D RADIOLIB_EXCLUDE_RFM2X=1
-D RADIOLIB_EXCLUDE_SX128X=1
-D RADIOLIB_EXCLUDE_AFSK=1
-D RADIOLIB_EXCLUDE_AX25=1
-D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
-D RADIOLIB_EXCLUDE_MORSE=1
-D RADIOLIB_EXCLUDE_APRS=1
-D RADIOLIB_EXCLUDE_BELL=1
-D RADIOLIB_EXCLUDE_RTTY=1
-D RADIOLIB_EXCLUDE_SSTV=1
; SX126X stays IN (that's this env's radio family); LR11X0 isn't used at all.
-D RADIOLIB_EXCLUDE_LR11X0=1
-D ESP32_PLATFORM
; --- T-LoRa Pager board (SX1262 variant) ---
-I variants/lilygo_tlora_pager
-D TLORA_PAGER=1
-D BOARD_HAS_PSRAM=1
; 0 = silence ARDUHAL [E] spam, same rationale as the other envs.
-D CORE_DEBUG_LEVEL=0
-D ARDUINO_USB_CDC_ON_BOOT=1
-D PIN_USER_BTN=0
-D USE_SX1262=1
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
; Same 22dBm ceiling as the LR1121 env -- trail-mate's own reference for this
; exact board (~/dev/trail-mate/boards/tlora_pager) uses the identical
; TRAIL_MATE_LORA_TX_POWER_MAX_DBM=22 for BOTH its LR1121 and SX1262 envs, and
; it's this chip's well-known real ceiling too.
-D LORA_TX_POWER=22
; SX126X_DIO2_AS_RF_SWITCH=true and SX126X_CURRENT_LIMIT=140 are carried over
; from the T-Deck's own SX1262 config -- NOT because this is the T-Deck, but
; because both are tied to the 22dBm target above, not to board-specific analog
; circuitry: RadioLib's own SX126x.cpp already defaults DIO2-as-switch to true
; internally (same value, just made explicit here), and its default current
; limit (60mA) is what silently capped the T-Deck's real TX power below its
; target before that env raised it to 140mA -- the same physics apply to any
; SX1262 module asked to reach 22dBm, not something unique to the T-Deck's PCB.
-D SX126X_DIO2_AS_RF_SWITCH=true
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
; LilyGoLib's SX1262 transmit/receive examples for this exact Pager explicitly
; drive the module's DIO3 TCXO supply at 3.0 V. The generic CustomSX1262
; fallback is only 1.6 V; that can leave this board's oscillator outside its
; specified supply range while still working at very short range. Pass the
; board value into begin() so calibration and all later RX/TX use the correct
; reference from the start.
-D SX126X_DIO3_TCXO_VOLTAGE=3.0f
-D P_LORA_DIO_1=14
-D P_LORA_NSS=36
-D P_LORA_RESET=47
-D P_LORA_BUSY=48
-D P_LORA_SCLK=35
-D P_LORA_MISO=33
-D P_LORA_MOSI=34
-D ENV_INCLUDE_GPS=1
-D ENV_SKIP_GPS_DETECT=1
-D ENV_INCLUDE_AHTX0=0
-D ENV_INCLUDE_BME280=0
-D ENV_INCLUDE_BMP280=0
-D ENV_INCLUDE_SHTC3=0
-D ENV_INCLUDE_SHT4X=0
-D ENV_INCLUDE_LPS22HB=0
-D ENV_INCLUDE_INA3221=0
-D ENV_INCLUDE_INA219=0
-D ENV_INCLUDE_INA226=0
-D ENV_INCLUDE_INA260=0
-D ENV_INCLUDE_MLX90614=0
-D ENV_INCLUDE_VL53L0X=0
-D ENV_INCLUDE_BME680=0
-D ENV_INCLUDE_BMP085=0
-D DISPLAY_SCALE_X=1.0
-D DISPLAY_SCALE_Y=1.0
; AW9364 backlight enable/pulse pin (ST7796LCDDisplay owns brightness -- see
; the CGRAM_OFFSET comment below for why this isn't a plain PWM pin).
-D PIN_TFT_LEDA_CTL=42
; Swapped vs. trail-mate's raw GPS_RX=4/GPS_TX=12: wadamesh's core calls
; Serial1.setPins(PIN_GPS_TX, PIN_GPS_RX), and HardwareSerial::setPins()
; takes (rxPin, txPin) -- so PIN_GPS_TX must be the ESP's own RX pin (4) and
; PIN_GPS_RX the ESP's own TX pin (12). See TLORA_PAGER_PORT.md Risk 1c.
-D PIN_GPS_RX=12
-D PIN_GPS_TX=4
-D GPS_BAUD_RATE=38400
; --- touch UI / companion stack ---
-I include
-I src
-I src/ui-touch
-D UI_LVGL=1
-D HAS_TOUCH_UI=1
-D FIRMWARE_OTA_ENV='"tlora_pager_sx1262_companion_radio_touch"'
-D HAS_PAGER_KEYBOARD=1
-D HAS_PAGER_ENCODER=1
-D KB_INT=6
-D KB_BACKLIGHT=46
-D ROTARY_A=40
-D ROTARY_B=41
-D ROTARY_C=7
; ES8311 codec I2S pins (NS4150B amp downstream, enabled via XL9555
; AMP_EN -- see TLoraPagerBoard::setAmpEnabled()). Confirmed against the
; canonical arduino-esp32 pins_arduino.h for this board -- see
; TLORA_PAGER_PORT.md's Audio row.
-D PIN_I2S_MCLK=10
-D PIN_I2S_BCK=11
-D PIN_I2S_WS=18
-D PIN_I2S_DOUT=45
-D PIN_I2S_SDIN=17
-D ENABLE_ADVERT_ON_BOOT=0
-D LV_CONF_PATH=lv_conf.h
-D LV_CONF_INCLUDE_SIMPLE=1
-D LV_MEMCPY_MEMSET_STD=1 ; newlib memcpy/memset in LVGL (see include/lv_conf.h)
; Smoother scroll: lower deceleration than LVGL's default (10) so flicks glide
; longer instead of stopping abruptly. lv_conf leaves this unset, so this -D wins.
-D LV_INDEV_DEF_SCROLL_THROW=7
-D MAX_CONTACTS=2000
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=ST7796LCDDisplay
-D ADMIN_PASSWORD='"password"'
-D MULTI_TRANSPORT_COMPANION=1
-D WADAMESH_FORK_BUILD=1
-D TCP_PORT=5000
-D WS_PORT=8765
-D BLE_PIN_CODE=123456
-D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
-D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
-D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
; --- ST7796 display (TFT_eSPI) ---
-D USER_SETUP_LOADED=1
; Same physical display/text path as the LR1121 Pager environment above.
-D LOAD_GLCD=1
-D ST7796_DRIVER=1
; REQUIRED: this panel's 222px glass is narrower than the ST7796 controller's
; 320px GRAM. TFT_eSPI's ST7796_Rotation.h only applies the needed 49px
; column/row offset when this is defined (unlike ST7789, it isn't automatic
; for ST7796) -- ST7796LCDDisplay.cpp #errors at compile time without it.
-D CGRAM_OFFSET=1
; REQUIRED on ESP32-S3: see the LR1121 env's identical comment above --
; same display, same panel, same constraint, unrelated to the radio chip.
-D USE_FSPI_PORT=1
-D TFT_WIDTH=222
-D TFT_HEIGHT=480
-D TFT_MOSI=34
-D TFT_SCLK=35
-D TFT_CS=38
-D TFT_DC=37
-D TFT_RST=-1
-D TFT_MISO=33
-D TFT_BL=-1
; trail-mate's kPagerDisplaySpiClockMhz = 80.
-D SPI_FREQUENCY=80000000
build_src_filter =
+<*.cpp>
+<*.c>
+<helpers/*.cpp>
+<helpers/esp32/*.cpp>
+<helpers/input/*.cpp>
+<helpers/ui/*.cpp>
+<ui-touch/*.cpp>
+<ui-touch/*.c>
+<../variants/lilygo_tlora_pager/*.cpp>
lib_deps =
https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.18.0
SPI
Wire
jgromes/RadioLib @ ^7.6.0
rweather/Crypto @ ^0.4.0
adafruit/RTClib @ ^2.1.3
melopero/Melopero RV3028 @ ^1.1.0
electroniccats/CayenneLPP @ 1.6.1
h2zero/NimBLE-Arduino @ 1.4.3
adafruit/Adafruit INA3221 Library @ ^1.0.1
adafruit/Adafruit INA219 @ ^1.2.3
robtillaart/INA226 @ ^0.6.4
adafruit/Adafruit INA260 Library @ ^1.5.3
adafruit/Adafruit AHTX0 @ ^2.0.5
adafruit/Adafruit BME280 Library @ ^2.3.0
adafruit/Adafruit BMP280 Library @ ^2.6.8
adafruit/Adafruit SHTC3 Library @ ^1.0.1
sensirion/Sensirion I2C SHT4x @ ^1.1.2
arduino-libraries/Arduino_LPS22HB @ ^1.0.2
adafruit/Adafruit MLX90614 Library @ ^2.1.5
adafruit/Adafruit_VL53L0X @ ^1.2.4
stevemarple/MicroNMEA @ ^2.0.6
adafruit/Adafruit BME680 Library @ ^2.0.4
adafruit/Adafruit BMP085 Library @ ^1.2.4
ESP32Async/ESPAsyncWebServer @ 3.10.3
file://arch/esp32/AsyncElegantOTA
lvgl/lvgl @ ^8.3.11
densaugeo/base64 @ ~1.4.0
knolleary/PubSubClient @ ^2.8.0
bodmer/TFT_eSPI @ ^2.5.43
adafruit/Adafruit TCA8418 @ ^1.0.2
lewisxhe/SensorLib @ 0.3.3
[env:ThinkNode_M9_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = thinknode_m9
monitor_speed = 115200
board_build.partitions = variants/thinknode_m9/partitions_m9_touch.csv
; patch_radiolib_lr11x0: preprod M9 LR1110s run old transceiver FW that rejects
; DriveDiosInSleepMode (0x012A, FW 0x0308+) with CMD_PERR -> begin() = -706.
; The pre-script makes RadioLib's config() skip it on old FW (idempotent,
; per-env libdeps copy). See scripts/build/patch_radiolib_lr11x0.py.
extra_scripts = pre:scripts/build/pre_gen_baked.py, pre:scripts/inject_wifi_env.py, pre:scripts/build/patch_lvgl_anim_uaf.py, pre:scripts/build/patch_lvgl_arabic.py, pre:scripts/build/patch_meshcore_txt_timestamp.py, pre:scripts/build/patch_radiolib_lr11x0.py, pre:scripts/build/patch_meshcore_rv3028_define.py, pre:scripts/build/perf_lvgl.py, merge-bin.py
custom_lvgl_o2 = yes ; LVGL at -O2 (scripts/build/perf_lvgl.py), like the T-Deck
custom_lvgl_iram = lv_draw_sw_blend.c, lv_draw_label.c ; their hot loops in IRAM, paid by the band in PSRAM
build_unflags =
-std=gnu++11
-std=gnu++14
build_flags =
; 1.17 core: ESP32Board.cpp includes <target.h> -> MicroNMEALocationProvider.h (header-only
; provider), so MicroNMEA never chains into the core lib's LDF scope -- hand it the path.
-I"${platformio.libdeps_dir}/${this.__env__}/MicroNMEA/src"
-Wno-deprecated-declarations -Wno-unused-parameter -Wno-cpp -Wno-overflow -Wno-return-type -std=gnu++17 -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
-D MC_VENDORED_TOUCH_APP
; The text-size presets use Montserrat 18/20/24. Those are generated fonts now
; (src/ui-touch/ui_font_NN.c, gated on this board's macro in the generator), not
; LVGL's: never force LV_FONT_MONTSERRAT_NN=1 here, it would link LVGL's copy too.
-D LORA_FREQ=869.618
-D LORA_BW=62.5
-D LORA_SF=8
-D ENABLE_PRIVATE_KEY_IMPORT=1
-D ENABLE_PRIVATE_KEY_EXPORT=1
-D RADIOLIB_EXCLUDE_CC1101=1
-D RADIOLIB_EXCLUDE_RF69=1
-D RADIOLIB_EXCLUDE_SX1231=1
-D RADIOLIB_EXCLUDE_SI443X=1
-D RADIOLIB_EXCLUDE_RFM2X=1
-D RADIOLIB_EXCLUDE_SX128X=1
-D RADIOLIB_EXCLUDE_AFSK=1
-D RADIOLIB_EXCLUDE_AX25=1
-D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
-D RADIOLIB_EXCLUDE_MORSE=1
-D RADIOLIB_EXCLUDE_APRS=1
-D RADIOLIB_EXCLUDE_BELL=1
-D RADIOLIB_EXCLUDE_RTTY=1
-D RADIOLIB_EXCLUDE_SSTV=1
-D ESP32_PLATFORM
; --- ThinkNode M9 board ---
-I variants/thinknode_m9
-D HAS_THINKNODE_M9
-D BOARD_HAS_PSRAM=1
; 0 = silence ARDUHAL [E] spam, same rationale as the other envs — worse here:
; with the UART bridge (below), Serial is UART0, which doubles as the
; MULTI_TRANSPORT_COMPANION frame stream, so the spam lands mid-frame.
-D CORE_DEBUG_LEVEL=0
; M9 uses the UART bridge (ttyUSB0), not native USB-CDC — confirmed during
; Specter bring-up. With ARDUINO_USB_CDC_ON_BOOT=1 (the T-Deck's setting)
; app Serial logs go to a ttyACM* port this board doesn't expose and
; appear completely silent.
-D ARDUINO_USB_CDC_ON_BOOT=0
; PIN_USER_BTN deliberately NOT defined: the M9 has no user/BOOT button at
; all (schematic-confirmed — only a power-cut slider and a reset button,
; neither a GPIO). Defining it as 0 put UITask's screen-lock poll on a
; floating strapping pin (phantom-lock risk) and armed the Power-off menu's
; deep-sleep wake on a button that can never be pressed.
-D RADIO_CLASS=CustomLR1110
-D WRAPPER_CLASS=CustomLR1110Wrapper
-D LORA_TX_POWER=22
; LR1110 clock: TCXO mode at 3.3 V — EMPIRICALLY CONFIRMED on the tester's
; preproduction unit: Meshtastic's thinknode_m9 variant logs "using DIO3 as
; TCXO reference voltage at 3.300000 V" followed by "LR1110 init result 0".
; The earlier theory here (Y1 = self-powered active oscillator -> tcxo must
; be 0) was disproven on hardware: with 0 the chip boots on its internal RC
; (SPI alive, no -2) but the first command needing the real 32 MHz clock is
; rejected -> radio init failed -707 (bring-up build #1, 2026-07-06). The
; schematic's "VTCXO rail" feeding Y1 is evidently the LR1110's own
; TCXO-supply output, so the chip must drive it.
-D LR11X0_DIO3_TCXO_VOLTAGE=3.3
; (RADIOLIB_DEBUG_BASIC was a bring-up flag, dropped now that the radio is
; proven on hardware — target.cpp's own LR1110 version print stays.)
-D RX_BOOSTED_GAIN=true
; DIO5/DIO6 -> RFSW0_V1/RFSW1_V2 confirmed against the V1.0 schematic (LR1110
; block, U7 pins 19/20 -> R19/R20 -> U8 V1/V2) — see target.cpp for the table
; and M9_PORT.md for the crop. The per-mode polarity is the conventional
; 2-pin table every other MeshCore LR1110 board uses, not independently
; re-derived from U8's datasheet (part number isn't printed on the schematic).
-D RF_SWITCH_TABLE
; --- LR1110 SPI / control pins (verified: V1.0 schematic + boot log) ---
-D P_LORA_NSS=39
-D P_LORA_DIO_1=42
-D P_LORA_RESET=45
-D P_LORA_BUSY=41
-D P_LORA_SCLK=40
-D P_LORA_MISO=38
-D P_LORA_MOSI=47
; --- Peripheral I2C bus 0 (Wire): RTC PCF8563 0x51 / IMU QMI8658 0x6b /
; compass QMC6309 0x7c. Brought up by ESP32Board::begin(). ---
-D PIN_BOARD_SDA=7
-D PIN_BOARD_SCL=6
-D PIN_VBAT_READ=13
; --- GPS (CC1167Q, UART1) ---
-D ENV_INCLUDE_GPS=1
; The GPS is soldered on, so skip the boot-time detect probe: a cold-booting
; CC1167Q can miss the 1 s NMEA window, leaving gps_detected false — which
; kills the GPS setting (and the GPS_LONG key) until reboot.
-D ENV_SKIP_GPS_DETECT=1
-D PIN_GPS_RX=3
-D PIN_GPS_TX=2
-D PIN_GPS_EN=11
-D PIN_GPS_RESET=5
-D PIN_GPS_RESET_ACTIVE=HIGH
; GPS_RST1 -> R46 -> NPN Q16 base: GPIO HIGH turns Q16 on, pulling the module's
; reset pin to GND — so HIGH asserts reset, LOW releases it (inverted vs. library default)
-D PIN_GPS_EN_ACTIVE=LOW
; GPIO10 (GPS ON_OFF) and GPIO4 (1PPS) exist on the schematic but have no
; consumer in this driver yet — reserved, not wired.
-D GPS_BAUD_RATE=115200
-D THINKNODE_M9_BUZZER_PIN=9
-D ENV_INCLUDE_AHTX0=0
-D ENV_INCLUDE_BME280=0
-D ENV_INCLUDE_BMP280=0
-D ENV_INCLUDE_SHTC3=0
-D ENV_INCLUDE_SHT4X=0
-D ENV_INCLUDE_LPS22HB=0
-D ENV_INCLUDE_INA3221=0
-D ENV_INCLUDE_INA219=0
-D ENV_INCLUDE_INA226=0
-D ENV_INCLUDE_INA260=0
-D ENV_INCLUDE_MLX90614=0
-D ENV_INCLUDE_VL53L0X=0
-D ENV_INCLUDE_BME680=0
-D ENV_INCLUDE_BMP085=0
; --- ST7789 panel (manufacturer-confirmed; NOT ILI9341) ---
; No LILYGO_TDECK / HELTEC_LORA_V4_TFT macro is defined, so ST7789LCDDisplay
; uses its default branch (Adafruit_ST7789 over the global `SPI`, the same
; instance the radio uses) — matches the LR1110 reference variants, which
; also share one SPI peripheral across radio + display + (on the M9) SD.
-D DISPLAY_SCALE_X=1.0
-D DISPLAY_SCALE_Y=1.0
; HARDWARE-VERIFIED (bring-up #6, 2026-07-06): rotation 3 rendered the UI
; 180 degrees off on the tester's unit; 1 is the correct landscape
; orientation (keyboard below screen). Adafruit rotations 1/3 are the two
; landscape options, 180 degrees apart.
-D DISPLAY_ROTATION=1
; PIN_TFT_LEDA_CTL is set to -1, NOT left undefined: the installed ST7789LCDDisplay
; references it unconditionally (`if (PIN_TFT_LEDA_CTL != -1)`, no #ifdef guard around
; the macro itself — leaving it undefined is a compile error, not a no-op). -1 makes
; that check skip the pin entirely, since the vendored class always drives it
; active-HIGH, but the M9's backlight is a PNP transistor (active-LOW) — so
; ThinkNodeM9Board owns BL_EN (GPIO17) directly instead (see M9Board.h/.cpp).
; PIN_PERIPH_POWER is the OTHER (also active-low) rail, gating the LCD/GPS/sensors,
; and IS passed through ST7789LCDDisplay's RefCountedDigitalPin constructor arg in
; target.cpp.
-D PIN_TFT_LEDA_CTL=-1
-D PIN_PERIPH_POWER=18
-D PIN_TFT_BL_EN=17
-D PIN_TFT_RST=14
-D PIN_TFT_DC=15
-D PIN_TFT_CS=16
; PIN_TFT_SCL / PIN_TFT_SDA intentionally NOT defined: only the
; USE_PIN_TFT / LILYGO_TDECK / HELTEC_LORA_V4_TFT branches of
; ST7789LCDDisplay's constructor consume them, and M9 uses none of those —
; it takes the default `display(&SPI, PIN_TFT_CS, PIN_TFT_DC, PIN_TFT_RST)`
; branch (global SPI, same instance the radio uses).
;
; NOTE: a software-SPI (USE_PIN_TFT) diagnostic build was tried here to test
; whether the class's hardcoded 80MHz hardware SPI clock was corrupting the
; boot-splash write. It wasn't — software SPI reproduced the EXACT same
; freeze-then-TG1WDT_SYS_RST at the exact same point, just slower, which
; rules out the SPI clock/signal-integrity theory entirely. See
; M9_PORT.md / git history if revisiting that path.
; microSD: on the shared LoRa SPI bus, same as T-Deck. CS is GPIO48 — the
; schematic net SPICLK_N, which is NOT one of the GPIO33-37 octal-PSRAM
; lines: SPICLK_N/GPIO48 (and SPICLK_P/GPIO47) are only reserved on the
; R8V/R16V 1.8V-differential-clock variants. This board is a plain R8 (see
; the env comment above), which uses the ordinary single-ended SPICLK
; instead, so GPIO48 is genuinely free. Confirmed via schematic: GPS_RST1
; and this net were the ones directly identified, not inferred.
-D PIN_SD_CS=48
-D HAS_M9_KEYBOARD=1
; QMC6309 magnetometer on the peripheral bus (Wire, 7/6) at 0x7C — exposed to
; Lua apps as wada.sys.compass() (CAP_COMPASS); driver in M9Compass.cpp.
-D HAS_M9_COMPASS=1
; QMI8658 IMU on the same bus at 0x6B. Accelerometer only, so the compass can
; correct for tilt — wada.sys.accel() (CAP_IMU); driver in M9Imu.cpp.
-D HAS_M9_IMU=1
; target.cpp builds the GPS on WadaNmeaLocationProvider and provides
; wadaGpsMotion(), so wada.sys.gps() carries speed_kmh/course on this board.
-D HAS_GPS_MOTION=1
; Keyboard bus SCHEMATIC-VERIFIED (V1.0 sheet, bring-up #9): S3 GPIO20 =
; net ESP32-2_SDA, GPIO21 = ESP32-2_SCL, to the keyboard ESP32-S2 (its
; GPIO7/6) through R2/R1 series resistors, pullups R73/R72, S2 powered from
; always-on 3V3 via R3. GPIO19/20 are also the S3's native USB D-/D+ pads —
; M9Board::begin() must release the USB-Serial-JTAG pad claim first.
-D PIN_KB_SDA=20
-D PIN_KB_SCL=21
-D PIN_KB_ADDR=0x6c
; --- touch UI / companion stack (M9 has no touch — keyboard + d-pad only;
; both text entry and keypad-nav focus traversal are wired, see
; M9_PORT.md) ---
-I include
-I src
-I src/ui-touch
-D UI_LVGL=1
-D HAS_TOUCH_UI=1
-D FIRMWARE_OTA_ENV='"ThinkNode_M9_companion_radio_touch"'
; 20px Montserrat for the at-a-glance body (atGlanceEnsureFont). 28px filled
; this 240x320 panel and crowded out the message (#446); the T-Deck already
; dropped to 20 for the same reason. The font is generated and gated on this
; board in scripts/build/gen-touch-fonts.sh, so nothing is forced here.
-D ENABLE_ADVERT_ON_BOOT=0
-D LV_CONF_PATH=lv_conf_m9.h
-D LV_CONF_INCLUDE_SIMPLE=1
-D LV_MEMCPY_MEMSET_STD=1 ; newlib memcpy/memset in LVGL (see include/lv_conf.h)
-D MAX_CONTACTS=2000
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=ST7789LCDDisplay
-D ADMIN_PASSWORD='"password"'
-D MULTI_TRANSPORT_COMPANION=1
-D WADAMESH_FORK_BUILD=1
-D TCP_PORT=5000
-D WS_PORT=8765
-D BLE_PIN_CODE=123456
-D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
-D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
-D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
build_src_filter =
+<*.cpp>
+<*.c>
+<helpers/*.cpp>
+<helpers/esp32/*.cpp>
+<helpers/input/*.cpp>
+<ui-touch/*.cpp>
+<ui-touch/*.c>
+<../variants/thinknode_m9/*.cpp>
lib_deps =
https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.18.0
SPI
Wire
jgromes/RadioLib @ ^7.6.0
rweather/Crypto @ ^0.4.0
adafruit/RTClib @ ^2.1.3
melopero/Melopero RV3028 @ ^1.1.0
electroniccats/CayenneLPP @ 1.6.1
h2zero/NimBLE-Arduino @ 1.4.3
adafruit/Adafruit INA3221 Library @ ^1.0.1
adafruit/Adafruit INA219 @ ^1.2.3
robtillaart/INA226 @ ^0.6.4
adafruit/Adafruit INA260 Library @ ^1.5.3
adafruit/Adafruit AHTX0 @ ^2.0.5
adafruit/Adafruit BME280 Library @ ^2.3.0
adafruit/Adafruit BMP280 Library @ ^2.6.8
adafruit/Adafruit SHTC3 Library @ ^1.0.1
sensirion/Sensirion I2C SHT4x @ ^1.1.2
arduino-libraries/Arduino_LPS22HB @ ^1.0.2
adafruit/Adafruit MLX90614 Library @ ^2.1.5
adafruit/Adafruit_VL53L0X @ ^1.2.4
stevemarple/MicroNMEA @ ^2.0.6
adafruit/Adafruit BME680 Library @ ^2.0.4
adafruit/Adafruit BMP085 Library @ ^1.2.4
adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
ESP32Async/ESPAsyncWebServer @ 3.10.3
file://arch/esp32/AsyncElegantOTA
lvgl/lvgl @ ^8.3.11
densaugeo/base64 @ ~1.4.0
knolleary/PubSubClient @ ^2.8.0
; ======================================================================
; RAK WisMesh Tap V2 — ST7789 TFT + FT5x06 capacitive touch + SX1262.
; RAK3312 module (ESP32-S3, 16 MB Flash DIO, 8 MB Octal PSRAM).
; ======================================================================
[env:rak_tap_v2_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = rak_tap_v2
monitor_speed = 115200
board_build.flash_mode = dio ; RAK3312 requires DIO (board JSON defaults to qio)
board_build.partitions = variants/rak_tap_v2/partitions_rak_tap_v2_touch.csv
extra_scripts = pre:scripts/build/pre_gen_baked.py, pre:scripts/inject_wifi_env.py, pre:scripts/build/patch_lvgl_anim_uaf.py, pre:scripts/build/patch_lvgl_arabic.py, pre:scripts/build/patch_meshcore_txt_timestamp.py, pre:scripts/build/perf_lvgl.py, merge-bin.py
custom_lvgl_o2 = yes ; LVGL at -O2 (scripts/build/perf_lvgl.py), like the T-Deck
custom_lvgl_iram = lv_draw_sw_blend.c, lv_draw_label.c ; their hot loops in IRAM, paid by the band in PSRAM
; Round-1b USB: MODE=1 HW CDC (single COM7). No 1200bps touch — use DTR/RTS reset.
build_unflags =
-D ARDUINO_USB_MODE=0
upload_speed = 460800
upload_flags =
--before=default_reset
--after=hard_reset
build_flags =
; 1.17 core: ESP32Board.cpp includes <target.h> -> MicroNMEALocationProvider.h (header-only
; provider), so MicroNMEA never chains into the core lib's LDF scope -- hand it the path.
-I"${platformio.libdeps_dir}/${this.__env__}/MicroNMEA/src"
-Wno-deprecated-declarations -Wno-unused-parameter -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
-D MC_VENDORED_TOUCH_APP
-D LORA_FREQ=869.618
-D LORA_BW=62.5
-D LORA_SF=8
-D ENABLE_PRIVATE_KEY_IMPORT=1
-D ENABLE_PRIVATE_KEY_EXPORT=1
-D RADIOLIB_EXCLUDE_CC1101=1
-D RADIOLIB_EXCLUDE_RF69=1
-D RADIOLIB_EXCLUDE_SX1231=1
-D RADIOLIB_EXCLUDE_SI443X=1
-D RADIOLIB_EXCLUDE_RFM2X=1
-D RADIOLIB_EXCLUDE_SX128X=1
-D RADIOLIB_EXCLUDE_AFSK=1
-D RADIOLIB_EXCLUDE_AX25=1
-D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
-D RADIOLIB_EXCLUDE_MORSE=1
-D RADIOLIB_EXCLUDE_APRS=1
-D RADIOLIB_EXCLUDE_BELL=1
-D RADIOLIB_EXCLUDE_RTTY=1
-D RADIOLIB_EXCLUDE_SSTV=1
-D ESP32_PLATFORM
; --- sensors (GPS + AHTx0 + BME680 enabled) ---
-D ENV_INCLUDE_GPS=1
-D ENV_INCLUDE_AHTX0=1
-D ENV_INCLUDE_BME280=0
-D ENV_INCLUDE_BMP280=0
-D ENV_INCLUDE_SHTC3=0
-D ENV_INCLUDE_SHT4X=0
-D ENV_INCLUDE_LPS22HB=0
-D ENV_INCLUDE_INA3221=0
-D ENV_INCLUDE_INA219=0
-D ENV_INCLUDE_INA226=0
-D ENV_INCLUDE_INA260=0
-D ENV_INCLUDE_MLX90614=0
-D ENV_INCLUDE_VL53L0X=0
-D ENV_INCLUDE_BME680=1
-D ENV_INCLUDE_BMP085=0
; --- LoRa SX1262 (RAK3312 module, same pins as RAK3112) ---
-I variants/rak_tap_v2
-D RAK_WISMESH_TAP_V2=1
-D USE_SX1262
-D ESP32_CPU_FREQ=240
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22
-D P_LORA_TX_LED=46
-D P_LORA_DIO_1=47
-D P_LORA_NSS=7
-D P_LORA_RESET=8
-D P_LORA_BUSY=48
-D P_LORA_SCLK=5
-D P_LORA_MISO=3
-D P_LORA_MOSI=6
-D SX126X_DIO2_AS_RF_SWITCH=true
-D SX126X_DIO3_TCXO_VOLTAGE=1.8
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D PIN_GPS_RX=43
-D PIN_GPS_TX=44
-D PIN_USER_BTN=0
-D PIN_VEXT_EN=14
-D PIN_BOARD_SDA=9
-D PIN_BOARD_SCL=40
; --- TFT (ST7789 240x320, LovyanGFX hardware SPI on FSPI/SPI2_HOST SCL=13/SDA=11) ---
; USB: ARDUINO_USB_* from boards/rak_tap_v2.json (MODE=1 HW CDC, Meshtastic-aligned)
-D DISPLAY_CLASS=LGFXDisplay
-D LGFX_INVERT_COLOR=true ; false=white bg, true=black bg (ST7789 INVON)
-D DISPLAY_ROTATION=3
-D DISPLAY_SCALE_X=1.0
-D DISPLAY_SCALE_Y=1.0
-D PIN_TFT_RST=-1
-D PIN_TFT_LEDA_CTL=41
-D PIN_TFT_LEDA_CTL_ACTIVE=HIGH
-D PIN_TFT_CS=12
-D PIN_TFT_DC=42
-D PIN_TFT_SCL=13
-D PIN_TFT_SDA=11
; --- FT5x06 capacitive touch (I2C0 addr 0x38, SDA=9/SCL=40) ---
-D HAS_RAK_TAP_V2=1
-D RAK_TS_FLIP_X=1
-D RAK_TS_FLIP_Y=1
-D PIN_TOUCH_SDA=9
-D PIN_TOUCH_SCL=40
-D PIN_TOUCH_INT=39
; --- touch UI / companion stack ---
-I include
-I src
-I src/ui-touch
-D UI_LVGL=1
-D HAS_TOUCH_UI=1
-D FIRMWARE_OTA_ENV='"rak_tap_v2_companion_radio_touch"'
-D ENABLE_ADVERT_ON_BOOT=0
-D LV_CONF_PATH=lv_conf.h
-D LV_CONF_INCLUDE_SIMPLE=1
-D LV_MEMCPY_MEMSET_STD=1 ; newlib memcpy/memset in LVGL (see include/lv_conf.h)
-D LV_INDEV_DEF_SCROLL_THROW=7
-D USER_SETUP_LOADED=1
-D ST7789_DRIVER=1
-D TFT_WIDTH=320
-D TFT_HEIGHT=240
-D TFT_MOSI=11
-D TFT_SCLK=13
-D TFT_CS=12
-D TFT_DC=42
-D TFT_RST=-1
-D TFT_MISO=-1
-D SPI_FREQUENCY=40000000
-D TFT_RGB_ORDER=TFT_RGB
-D TFT_INVERSION_ON=1
-D TFT_BL=41
-D TFT_BACKLIGHT_ON=1
-D MAX_CONTACTS=2000
-D MAX_GROUP_CHANNELS=40
-D ADMIN_PASSWORD='"password"'
-D MULTI_TRANSPORT_COMPANION=1
-D WADAMESH_FORK_BUILD=1
-D TCP_PORT=5000
-D WS_PORT=8765
-D BLE_PIN_CODE=123456
-D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
-D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
-D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
build_src_filter =
+<*.cpp>
+<helpers/*.cpp>
+<helpers/esp32/*.cpp>
+<helpers/input/*.cpp>
; RAK's DISPLAY_CLASS is OUR LGFXDisplay (variants/rak_tap_v2) -- the UIColor palette
; must come from a project object, or the linker pulls the core's same-named
; LGFXDisplay.o from the archive for it and every method collides.
+<helpers/ui/UIColorPalette.cpp>
+<ui-touch/*.cpp>
+<ui-touch/*.c>
+<../variants/rak_tap_v2/*.cpp>
lib_deps =
https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.18.0
SPI
Wire
jgromes/RadioLib @ ^7.6.0
rweather/Crypto @ ^0.4.0
adafruit/RTClib @ ^2.1.3
melopero/Melopero RV3028 @ ^1.1.0
electroniccats/CayenneLPP @ 1.6.1
h2zero/NimBLE-Arduino @ 1.4.3
adafruit/Adafruit INA3221 Library @ ^1.0.1
adafruit/Adafruit INA219 @ ^1.2.3
robtillaart/INA226 @ ^0.6.4
adafruit/Adafruit INA260 Library @ ^1.5.3
adafruit/Adafruit AHTX0 @ ^2.0.5
adafruit/Adafruit BME280 Library @ ^2.3.0
adafruit/Adafruit BMP280 Library @ ^2.6.8
adafruit/Adafruit SHTC3 Library @ ^1.0.1
sensirion/Sensirion I2C SHT4x @ ^1.1.2
arduino-libraries/Arduino_LPS22HB @ ^1.0.2
adafruit/Adafruit MLX90614 Library @ ^2.1.5
adafruit/Adafruit_VL53L0X @ ^1.2.4
stevemarple/MicroNMEA @ ^2.0.6
adafruit/Adafruit BME680 Library @ ^2.0.4
adafruit/Adafruit BMP085 Library @ ^1.2.4
adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
ESP32Async/ESPAsyncWebServer @ 3.10.3
file://arch/esp32/AsyncElegantOTA
lvgl/lvgl @ ^8.3.11
lovyan03/LovyanGFX@1.2.21
bodmer/TFT_eSPI @ ^2.5.43
densaugeo/base64 @ ~1.4.0
knolleary/PubSubClient @ ^2.8.0
Reference in new issue View Git Blame Copy Permalink