1.9 KiB
1.9 KiB
| 1 | # Heltec V4 TFT touch firmware - custom partition table. |
|---|---|
| 2 | # |
| 3 | # 16 MB layout with TWO EQUAL OTA app slots so the touch firmware can |
| 4 | # self-update (HTTP OTA via the meshcomod proxy). The app region (app0+app1) |
| 5 | # is split evenly at 3.875 MB each - the firmware is ~2.4-2.5 MB, leaving |
| 6 | # ~1.3 MB of growth headroom per slot. The tiles + spiffs offsets are UNCHANGED, |
| 7 | # so an OTA (or the one-time USB re-flash that installs this table) keeps the |
| 8 | # map tile cache and all user data (/new_prefs, /contacts3, /channels2, chat |
| 9 | # history) intact. |
| 10 | # - app0 3.875 MB (ota_0) + equal A/B slots; OTA ping-pongs between them |
| 11 | # - app1 3.875 MB (ota_1) + (was 1.5 MB - too small to hold the image) |
| 12 | # - spiffs 3.375 MB for user data |
| 13 | # |
| 14 | # Layout (16 MB total): |
| 15 | # 0x000000-0x009000 bootloader + partition table |
| 16 | # 0x009000-0x00E000 nvs (20 KB, unchanged) |
| 17 | # 0x00E000-0x010000 otadata (8 KB, unchanged) |
| 18 | # 0x010000-0x3F0000 app0 (3.875 MB, ota_0) |
| 19 | # 0x3F0000-0x7D0000 app1 (3.875 MB, ota_1 - grown from 1.5 MB) |
| 20 | # 0x7D0000-0xC90000 tiles (4.75 MB, LittleFS, type 0x83) [unchanged] |
| 21 | # 0xC90000-0xFF0000 spiffs (3.375 MB) [unchanged] |
| 22 | # 0xFF0000-0x1000000 coredump (64 KB, unchanged) |
| 23 | # |
| 24 | # Subtype 0x83 = ESP-IDF LittleFS subtype. The Arduino LittleFSFS instance |
| 25 | # partition), so the two filesystems don't collide. |
| 26 | # Name, Type, SubType, Offset, Size, Flags |
| 27 | nvs, data, nvs, 0x9000, 0x5000, |
| 28 | otadata, data, ota, 0xe000, 0x2000, |
| 29 | app0, app, ota_0, 0x10000, 0x3E0000, |
| 30 | app1, app, ota_1, 0x3F0000, 0x3E0000, |
| 31 | tiles, data, 0x83, 0x7D0000, 0x4C0000, |
| 32 | spiffs, data, spiffs, 0xC90000, 0x360000, |
| 33 | coredump, data, coredump, 0xFF0000, 0x10000, |