From d3a0417e3ff4322eac4143b834ccf309fe436466 Mon Sep 17 00:00:00 2001 From: unknown Date: Thu, 20 Aug 2026 08:59:52 +0300 Subject: [PATCH] =?UTF-8?q?=D0=9F=D0=BE=D1=87=D0=B8=D1=81=D1=82=D0=B8?= =?UTF-8?q?=D0=BB=20=D1=81=D0=BB=D1=83=D1=87=D0=B0=D0=B9=D0=BD=D1=8B=D0=B5?= =?UTF-8?q?=20=D0=B1=D1=8D=D0=BA=D0=B0=D0=BF=D1=8B?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- variants/esp32/diy/hydra/variant.h.bak | 54 -------------------------- 1 file changed, 54 deletions(-) delete mode 100644 variants/esp32/diy/hydra/variant.h.bak diff --git a/variants/esp32/diy/hydra/variant.h.bak b/variants/esp32/diy/hydra/variant.h.bak deleted file mode 100644 index 6bd296097..000000000 --- a/variants/esp32/diy/hydra/variant.h.bak +++ /dev/null @@ -1,54 +0,0 @@ -// For OLED LCD -#define I2C_SDA 21 -#define I2C_SCL 22 - -// For GPS, 'undef's not needed -#define GPS_TX_PIN 15 -#define GPS_RX_PIN 12 -#define PIN_GPS_EN 4 - -#define BUTTON_PIN 39 // The middle button GPIO on the T-Beam -// Note: On the ESP32 base version, gpio34-39 are input-only, and do not have internal pull-ups. -// If 39 is not being used for a button, it is suggested to remove the #define. -#define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage -#define ADC_CHANNEL ADC1_GPIO35_CHANNEL -#define ADC_MULTIPLIER 1.85 // (R1 = 470k, R2 = 680k) -#define EXT_PWR_DETECT 4 // Pin to detect connected external power source for LILYGO® TTGO T-Energy T18 and other DIY boards -#define EXT_NOTIFY_OUT 12 // Overridden default pin to use for Ext Notify Module (#975). -#define LED_POWER 2 // add status LED (compatible with core-pcb and DIY targets) - -// Radio -#define USE_SX1262 // E22-900M30S uses SX1262 -#define USE_SX1268 // E22-400M30S uses SX1268 -#define SX126X_MAX_POWER \ - 22 // Outputting 22dBm from SX1262 results in ~30dBm E22-900M30S output (module only uses last stage of the YP2233W PA) -#define SX126X_DIO3_TCXO_VOLTAGE 1.8 // E22 series TCXO reference voltage is 1.8V - -#define SX126X_CS 18 // EBYTE module's NSS pin -#define SX126X_SCK 5 // EBYTE module's SCK pin -#define SX126X_MOSI 27 // EBYTE module's MOSI pin -#define SX126X_MISO 19 // EBYTE module's MISO pin -#define SX126X_RESET 23 // EBYTE module's NRST pin -#define SX126X_BUSY 32 // EBYTE module's BUSY pin -#define SX126X_DIO1 33 // EBYTE module's DIO1 pin - -#define SX126X_TXEN 13 // Schematic connects EBYTE module's TXEN pin to MCU -#define SX126X_RXEN 14 // Schematic connects EBYTE module's RXEN pin to MCU - -#define LORA_CS SX126X_CS // Compatibility with variant file configuration structure -#define LORA_SCK SX126X_SCK // Compatibility with variant file configuration structure -#define LORA_MOSI SX126X_MOSI // Compatibility with variant file configuration structure -#define LORA_MISO SX126X_MISO // Compatibility with variant file configuration structure -#define LORA_DIO1 SX126X_DIO1 // Compatibility with variant file configuration structure -#define LORA_TXEN SX126X_TXEN // Compatibility with variant file configuration structure -#define LORA_RXEN SX126X_RXEN // Compatibility with variant file configuration structure -#define LORA_RESET SX126X_RESET // Compatibility with variant file configuration structure -#define LORA_DIO2 SX126X_BUSY // Compatibility with variant file configuration structure - - -#ifdef EBYTE_E22 -// Internally the TTGO module hooks the SX126x-DIO2 in to control the TX/RX switch -// (which is the default for the sx1262interface code) -#define SX126X_DIO3_TCXO_VOLTAGE 1.8 -#define TCXO_OPTIONAL // make it so that the firmware can try both TCXO and XTAL -#endif \ No newline at end of file