MeshCoreTel-firmware/variants/minewsemi_me25ls01/variant.cpp

#include "variant.h"
#include "wiring_constants.h"
#include "wiring_digital.h"

const uint32_t g_ADigitalPinMap[PINS_COUNT + 1] =
{
  0,  // P0.00
  1,  // P0.01
  2,  // P0.02
  3,  // P0.03
  4,  // P0.04
  5,  // P0.05
  6,  // P0.06
  7,  // P0.07
  8,  // P0.08
  9,  // P0.09
  10, // P0.10
  11, // P0.11
  12, // P0.12
  13, // P0.13, PIN_SERIAL1_TX
  14, // P0.14, PIN_SERIAL1_RX
  15, // P0.15, PIN_SERIAL2_RX
  16, // P0.16, PIN_WIRE_SCL
  17, // P0.17, PIN_SERIAL2_TX
  18, // P0.18
  19, // P0.19
  20, // P0.20
  21, // P0.21, PIN_WIRE_SDA
  22, // P0.22
  23, // P0.23
  24, // P0.24, 
  25, // P0.25, 
  26, // P0.26, 
  27, // P0.27, 
  28, // P0.28
  29, // P0.29, 
  30, // P0.30
  31, // P0.31, BATTERY_PIN
  32, // P1.00
  33, // P1.01, LORA_DIO_1
  34, // P1.02
  35, // P1.03, 
  36, // P1.04
  37, // P1.05, LR1110_EN
  38, // P1.06, 
  39, // P1.07, 
  40, // P1.08, PIN_SPI_MISO
  41, // P1.09, PIN_SPI_MOSI
  42, // P1.10, LORA_RESET
  43, // P1.11, GPS_EN
  44, // P1.12, GPS_SLEEP_INT
  45, // P1.13
  46, // P1.14, GPS_RESETB
  47, // P1.15, PIN_GPS_RESET
  255,  // NRFX_SPIM_PIN_NOT_USED
};

void initVariant()
{
  pinMode(BATTERY_PIN, INPUT);
  pinMode(PIN_BUTTON1, INPUT);

  // pinMode(PIN_3V3_EN, OUTPUT);
  // pinMode(PIN_3V3_ACC_EN, OUTPUT);
  pinMode(LED_PIN, OUTPUT);
  pinMode(P_LORA_TX_LED, OUTPUT);

  digitalWrite(LED_PIN, HIGH);
  digitalWrite(P_LORA_TX_LED, LOW);
}