MeshCoreTel-firmware/variants/heltec_v3/platformio.ini

[Heltec_lora32_v3]
extends = esp32_base
board = esp32-s3-devkitc-1
build_flags =
  ${esp32_base.build_flags}
  ${sensor_base.build_flags}
  -I variants/heltec_v3
  -D HELTEC_LORA_V3
  -D ESP32_CPU_FREQ=80
  -D P_LORA_DIO_1=14
  -D P_LORA_NSS=8
  -D P_LORA_RESET=RADIOLIB_NC
  -D P_LORA_BUSY=13
  -D P_LORA_SCLK=9
  -D P_LORA_MISO=11
  -D P_LORA_MOSI=10
  -D RADIO_CLASS=CustomSX1262
  -D WRAPPER_CLASS=CustomSX1262Wrapper
  -D LORA_TX_POWER=22
  -D P_LORA_TX_LED=35
  -D PIN_BOARD_SDA=17
  -D PIN_BOARD_SCL=18
  -D PIN_USER_BTN=0
  -D PIN_VEXT_EN=36
  -D SX126X_DIO2_AS_RF_SWITCH=true
  -D SX126X_DIO3_TCXO_VOLTAGE=1.8
  -D SX126X_CURRENT_LIMIT=140
  -D SX126X_RX_BOOSTED_GAIN=1
  -D PIN_GPS_RX=47
  -D PIN_GPS_TX=48
  -D PIN_GPS_EN=26
build_src_filter = ${esp32_base.build_src_filter}
  +<../variants/heltec_v3>
  +<helpers/sensors>
lib_deps =
  ${esp32_base.lib_deps}
  ${sensor_base.lib_deps}

[env:Heltec_v3_repeater]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D DISPLAY_CLASS=SSD1306Display
  -D ADVERT_NAME='"Heltec Repeater"'
  -D ADVERT_LAT=0.0
  -D ADVERT_LON=0.0
  -D ADMIN_PASSWORD='"password"'
  -D MAX_NEIGHBOURS=50
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<helpers/ui/SSD1306Display.cpp>
  +<../examples/simple_repeater>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  ${esp32_ota.lib_deps}
  bakercp/CRC32 @ ^2.0.0

[env:Heltec_v3_repeater_bridge_rs232]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D DISPLAY_CLASS=SSD1306Display
  -D ADVERT_NAME='"RS232 Bridge"'
  -D ADVERT_LAT=0.0
  -D ADVERT_LON=0.0
  -D ADMIN_PASSWORD='"password"'
  -D MAX_NEIGHBOURS=50
  -D WITH_RS232_BRIDGE=Serial2
  -D WITH_RS232_BRIDGE_RX=5
  -D WITH_RS232_BRIDGE_TX=6
;  -D BRIDGE_DEBUG=1
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<helpers/bridges/RS232Bridge.cpp>
  +<helpers/ui/SSD1306Display.cpp>
  +<../examples/simple_repeater>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  ${esp32_ota.lib_deps}

[env:Heltec_v3_repeater_bridge_espnow]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D DISPLAY_CLASS=SSD1306Display
  -D ADVERT_NAME='"ESPNow Bridge"'
  -D ADVERT_LAT=0.0
  -D ADVERT_LON=0.0
  -D ADMIN_PASSWORD='"password"'
  -D MAX_NEIGHBOURS=50
  -D WITH_ESPNOW_BRIDGE=1
;  -D BRIDGE_DEBUG=1
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<helpers/bridges/ESPNowBridge.cpp>
  +<helpers/ui/SSD1306Display.cpp>
  +<../examples/simple_repeater>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  ${esp32_ota.lib_deps}

[env:Heltec_v3_room_server]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D DISPLAY_CLASS=SSD1306Display
  -D ADVERT_NAME='"Heltec Room"'
  -D ADVERT_LAT=0.0
  -D ADVERT_LON=0.0
  -D ADMIN_PASSWORD='"password"'
  -D ROOM_PASSWORD='"hello"'
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<helpers/ui/SSD1306Display.cpp>
  +<../examples/simple_room_server>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  ${esp32_ota.lib_deps}

[env:Heltec_v3_terminal_chat]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D MAX_CONTACTS=300
  -D MAX_GROUP_CHANNELS=1
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<../examples/simple_secure_chat/main.cpp>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  densaugeo/base64 @ ~1.4.0

[env:Heltec_v3_companion_radio_usb]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -I examples/companion_radio/ui-new
  -D MAX_CONTACTS=300
  -D MAX_GROUP_CHANNELS=8
  -D DISPLAY_CLASS=SSD1306Display
; NOTE: DO NOT ENABLE -->  -D MESH_PACKET_LOGGING=1
; NOTE: DO NOT ENABLE -->  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<helpers/ui/SSD1306Display.cpp>
  +<helpers/ui/MomentaryButton.cpp>
  +<../examples/companion_radio/*.cpp>
  +<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  densaugeo/base64 @ ~1.4.0

[env:Heltec_v3_companion_radio_ble]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -I examples/companion_radio/ui-new
  -D MAX_CONTACTS=300
  -D MAX_GROUP_CHANNELS=8
  -D DISPLAY_CLASS=SSD1306Display
  -D BLE_PIN_CODE=123456   ; dynamic, random PIN
  -D AUTO_SHUTDOWN_MILLIVOLTS=3400
  -D BLE_DEBUG_LOGGING=1
  -D OFFLINE_QUEUE_SIZE=256
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<helpers/ui/SSD1306Display.cpp>
  +<helpers/ui/MomentaryButton.cpp>
  +<helpers/esp32/*.cpp>
  +<../examples/companion_radio/*.cpp>
  +<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  densaugeo/base64 @ ~1.4.0

[env:Heltec_v3_companion_radio_wifi]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -I examples/companion_radio/ui-new
  -D MAX_CONTACTS=300
  -D MAX_GROUP_CHANNELS=8
  -D DISPLAY_CLASS=SSD1306Display
  -D WIFI_DEBUG_LOGGING=1
  -D WIFI_SSID='"myssid"'
  -D WIFI_PWD='"mypwd"'
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<helpers/ui/SSD1306Display.cpp>
  +<helpers/ui/MomentaryButton.cpp>
  +<helpers/esp32/*.cpp>
  +<../examples/companion_radio/*.cpp>
  +<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  densaugeo/base64 @ ~1.4.0

[env:Heltec_v3_sensor]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D ADVERT_NAME='"Heltec v3 Sensor"'
  -D ADVERT_LAT=0.0
  -D ADVERT_LON=0.0
  -D ADMIN_PASSWORD='"password"'
  -D ENV_PIN_SDA=33
  -D ENV_PIN_SCL=34
  -D DISPLAY_CLASS=SSD1306Display
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<helpers/ui/SSD1306Display.cpp>
  +<../examples/simple_sensor>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  ${esp32_ota.lib_deps}

[env:Heltec_WSL3_repeater]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D ADVERT_NAME='"Heltec Repeater"'
  -D ADVERT_LAT=0.0
  -D ADVERT_LON=0.0
  -D ADMIN_PASSWORD='"password"'
  -D MAX_NEIGHBOURS=50
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<../examples/simple_repeater>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  ${esp32_ota.lib_deps}
  bakercp/CRC32 @ ^2.0.0

[env:Heltec_WSL3_repeater_bridge_rs232]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D ADVERT_NAME='"RS232 Bridge"'
  -D ADVERT_LAT=0.0
  -D ADVERT_LON=0.0
  -D ADMIN_PASSWORD='"password"'
  -D MAX_NEIGHBOURS=50
  -D WITH_RS232_BRIDGE=Serial2
  -D WITH_RS232_BRIDGE_RX=5
  -D WITH_RS232_BRIDGE_TX=6
;  -D BRIDGE_DEBUG=1
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<helpers/bridges/RS232Bridge.cpp>
  +<../examples/simple_repeater>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  ${esp32_ota.lib_deps}
  bakercp/CRC32 @ ^2.0.0

[env:Heltec_WSL3_repeater_bridge_espnow]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D ADVERT_NAME='"ESPNow Bridge"'
  -D ADVERT_LAT=0.0
  -D ADVERT_LON=0.0
  -D ADMIN_PASSWORD='"password"'
  -D MAX_NEIGHBOURS=50
  -D WITH_ESPNOW_BRIDGE=1
;  -D BRIDGE_DEBUG=1
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<helpers/bridges/ESPNowBridge.cpp>
  +<../examples/simple_repeater>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  ${esp32_ota.lib_deps}
  bakercp/CRC32 @ ^2.0.0

[env:Heltec_WSL3_room_server]
extends = Heltec_lora32_v3
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<../examples/simple_room_server>
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D ADVERT_NAME='"Heltec Room"'
  -D ADVERT_LAT=0.0
  -D ADVERT_LON=0.0
  -D ADMIN_PASSWORD='"password"'
  -D ROOM_PASSWORD='"hello"'
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  ${esp32_ota.lib_deps}

[env:Heltec_WSL3_companion_radio_ble]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D MAX_CONTACTS=300
  -D MAX_GROUP_CHANNELS=8
  -D BLE_PIN_CODE=123456
  -D BLE_DEBUG_LOGGING=1
  -D OFFLINE_QUEUE_SIZE=256
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<helpers/esp32/*.cpp>
  +<../examples/companion_radio/*.cpp>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  densaugeo/base64 @ ~1.4.0

[env:Heltec_WSL3_companion_radio_usb]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D MAX_CONTACTS=140
  -D MAX_GROUP_CHANNELS=8
; NOTE: DO NOT ENABLE -->  -D MESH_PACKET_LOGGING=1
; NOTE: DO NOT ENABLE -->  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<../examples/companion_radio/*.cpp>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  densaugeo/base64 @ ~1.4.0

[env:Heltec_WSL3_companion_radio_wifi]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D MAX_CONTACTS=300
  -D MAX_GROUP_CHANNELS=8
  -D WIFI_DEBUG_LOGGING=1
  -D WIFI_SSID='"myssid"'
  -D WIFI_PWD='"mypwd"'
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<helpers/esp32/*.cpp>
  +<../examples/companion_radio/*.cpp>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  densaugeo/base64 @ ~1.4.0

[env:Heltec_WSL3_sensor]
extends = Heltec_lora32_v3
build_flags =
  ${Heltec_lora32_v3.build_flags}
  -D ADVERT_NAME='"Heltec Sensor"'
  -D ADVERT_LAT=0.0
  -D ADVERT_LON=0.0
  -D ADMIN_PASSWORD='"password"'
;  -D MESH_PACKET_LOGGING=1
;  -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v3.build_src_filter}
  +<../examples/simple_sensor>
lib_deps =
  ${Heltec_lora32_v3.lib_deps}
  ${esp32_ota.lib_deps}