DataStore.cpp 21 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614
  1. #include <Arduino.h>
  2. #include "DataStore.h"
  3. #if defined(EXTRAFS) || defined(QSPIFLASH)
  4. #define MAX_BLOBRECS 100
  5. #else
  6. #define MAX_BLOBRECS 20
  7. #endif
  8. DataStore::DataStore(FILESYSTEM& fs, mesh::RTCClock& clock) : _fs(&fs), _fsExtra(nullptr), _clock(&clock),
  9. #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
  10. identity_store(fs, "")
  11. #elif defined(RP2040_PLATFORM)
  12. identity_store(fs, "/identity")
  13. #else
  14. identity_store(fs, "/identity")
  15. #endif
  16. {
  17. }
  18. #if defined(EXTRAFS) || defined(QSPIFLASH)
  19. DataStore::DataStore(FILESYSTEM& fs, FILESYSTEM& fsExtra, mesh::RTCClock& clock) : _fs(&fs), _fsExtra(&fsExtra), _clock(&clock),
  20. #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
  21. identity_store(fs, "")
  22. #elif defined(RP2040_PLATFORM)
  23. identity_store(fs, "/identity")
  24. #else
  25. identity_store(fs, "/identity")
  26. #endif
  27. {
  28. }
  29. #endif
  30. static File openWrite(FILESYSTEM* fs, const char* filename) {
  31. #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
  32. fs->remove(filename);
  33. return fs->open(filename, FILE_O_WRITE);
  34. #elif defined(RP2040_PLATFORM)
  35. return fs->open(filename, "w");
  36. #else
  37. return fs->open(filename, "w", true);
  38. #endif
  39. }
  40. #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
  41. static uint32_t _ContactsChannelsTotalBlocks = 0;
  42. #endif
  43. void DataStore::begin() {
  44. #if defined(RP2040_PLATFORM)
  45. identity_store.begin();
  46. #endif
  47. #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
  48. _ContactsChannelsTotalBlocks = _getContactsChannelsFS()->_getFS()->cfg->block_count;
  49. checkAdvBlobFile();
  50. #if defined(EXTRAFS) || defined(QSPIFLASH)
  51. migrateToSecondaryFS();
  52. #endif
  53. #else
  54. // init 'blob store' support
  55. _fs->mkdir("/bl");
  56. #endif
  57. }
  58. #if defined(ESP32)
  59. #include <SPIFFS.h>
  60. #include <nvs_flash.h>
  61. #elif defined(RP2040_PLATFORM)
  62. #include <LittleFS.h>
  63. #elif defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
  64. #if defined(QSPIFLASH)
  65. #include <CustomLFS_QSPIFlash.h>
  66. #elif defined(EXTRAFS)
  67. #include <CustomLFS.h>
  68. #else
  69. #include <InternalFileSystem.h>
  70. #endif
  71. #endif
  72. #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
  73. int _countLfsBlock(void *p, lfs_block_t block){
  74. if (block > _ContactsChannelsTotalBlocks) {
  75. MESH_DEBUG_PRINTLN("ERROR: Block %d exceeds filesystem bounds - CORRUPTION DETECTED!", block);
  76. return LFS_ERR_CORRUPT; // return error to abort lfs_traverse() gracefully
  77. }
  78. lfs_size_t *size = (lfs_size_t*) p;
  79. *size += 1;
  80. return 0;
  81. }
  82. lfs_ssize_t _getLfsUsedBlockCount(FILESYSTEM* fs) {
  83. lfs_size_t size = 0;
  84. int err = lfs_traverse(fs->_getFS(), _countLfsBlock, &size);
  85. if (err) {
  86. MESH_DEBUG_PRINTLN("ERROR: lfs_traverse() error: %d", err);
  87. return 0;
  88. }
  89. return size;
  90. }
  91. #endif
  92. uint32_t DataStore::getStorageUsedKb() const {
  93. #if defined(ESP32)
  94. return SPIFFS.usedBytes() / 1024;
  95. #elif defined(RP2040_PLATFORM)
  96. FSInfo info;
  97. info.usedBytes = 0;
  98. _fs->info(info);
  99. return info.usedBytes / 1024;
  100. #elif defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
  101. const lfs_config* config = _getContactsChannelsFS()->_getFS()->cfg;
  102. int usedBlockCount = _getLfsUsedBlockCount(_getContactsChannelsFS());
  103. int usedBytes = config->block_size * usedBlockCount;
  104. return usedBytes / 1024;
  105. #else
  106. return 0;
  107. #endif
  108. }
  109. uint32_t DataStore::getStorageTotalKb() const {
  110. #if defined(ESP32)
  111. return SPIFFS.totalBytes() / 1024;
  112. #elif defined(RP2040_PLATFORM)
  113. FSInfo info;
  114. info.totalBytes = 0;
  115. _fs->info(info);
  116. return info.totalBytes / 1024;
  117. #elif defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
  118. const lfs_config* config = _getContactsChannelsFS()->_getFS()->cfg;
  119. int totalBytes = config->block_size * config->block_count;
  120. return totalBytes / 1024;
  121. #else
  122. return 0;
  123. #endif
  124. }
  125. File DataStore::openRead(const char* filename) {
  126. #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
  127. return _fs->open(filename, FILE_O_READ);
  128. #elif defined(RP2040_PLATFORM)
  129. return _fs->open(filename, "r");
  130. #else
  131. return _fs->open(filename, "r", false);
  132. #endif
  133. }
  134. File DataStore::openRead(FILESYSTEM* fs, const char* filename) {
  135. #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
  136. return fs->open(filename, FILE_O_READ);
  137. #elif defined(RP2040_PLATFORM)
  138. return fs->open(filename, "r");
  139. #else
  140. return fs->open(filename, "r", false);
  141. #endif
  142. }
  143. bool DataStore::removeFile(const char* filename) {
  144. return _fs->remove(filename);
  145. }
  146. bool DataStore::removeFile(FILESYSTEM* fs, const char* filename) {
  147. return fs->remove(filename);
  148. }
  149. bool DataStore::formatFileSystem() {
  150. #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
  151. if (_fsExtra == nullptr) {
  152. return _fs->format();
  153. } else {
  154. return _fs->format() && _fsExtra->format();
  155. }
  156. #elif defined(RP2040_PLATFORM)
  157. return LittleFS.format();
  158. #elif defined(ESP32)
  159. bool fs_success = ((fs::SPIFFSFS *)_fs)->format();
  160. esp_err_t nvs_err = nvs_flash_erase(); // no need to reinit, will be done by reboot
  161. return fs_success && (nvs_err == ESP_OK);
  162. #else
  163. #error "need to implement format()"
  164. #endif
  165. }
  166. bool DataStore::loadMainIdentity(mesh::LocalIdentity &identity) {
  167. return identity_store.load("_main", identity);
  168. }
  169. bool DataStore::saveMainIdentity(const mesh::LocalIdentity &identity) {
  170. return identity_store.save("_main", identity);
  171. }
  172. void DataStore::loadPrefs(NodePrefs& prefs, double& node_lat, double& node_lon) {
  173. if (_fs->exists("/new_prefs")) {
  174. loadPrefsInt("/new_prefs", prefs, node_lat, node_lon); // new filename
  175. } else if (_fs->exists("/node_prefs")) {
  176. loadPrefsInt("/node_prefs", prefs, node_lat, node_lon);
  177. savePrefs(prefs, node_lat, node_lon); // save to new filename
  178. _fs->remove("/node_prefs"); // remove old
  179. }
  180. }
  181. void DataStore::loadPrefsInt(const char *filename, NodePrefs& _prefs, double& node_lat, double& node_lon) {
  182. File file = openRead(_fs, filename);
  183. if (file) {
  184. uint8_t pad[8];
  185. file.read((uint8_t *)&_prefs.airtime_factor, sizeof(float)); // 0
  186. file.read((uint8_t *)_prefs.node_name, sizeof(_prefs.node_name)); // 4
  187. file.read(pad, 4); // 36
  188. file.read((uint8_t *)&node_lat, sizeof(node_lat)); // 40
  189. file.read((uint8_t *)&node_lon, sizeof(node_lon)); // 48
  190. file.read((uint8_t *)&_prefs.freq, sizeof(_prefs.freq)); // 56
  191. file.read((uint8_t *)&_prefs.sf, sizeof(_prefs.sf)); // 60
  192. file.read((uint8_t *)&_prefs.cr, sizeof(_prefs.cr)); // 61
  193. file.read(pad, 1); // 62
  194. file.read((uint8_t *)&_prefs.manual_add_contacts, sizeof(_prefs.manual_add_contacts)); // 63
  195. file.read((uint8_t *)&_prefs.bw, sizeof(_prefs.bw)); // 64
  196. file.read((uint8_t *)&_prefs.tx_power_dbm, sizeof(_prefs.tx_power_dbm)); // 68
  197. file.read((uint8_t *)&_prefs.telemetry_mode_base, sizeof(_prefs.telemetry_mode_base)); // 69
  198. file.read((uint8_t *)&_prefs.telemetry_mode_loc, sizeof(_prefs.telemetry_mode_loc)); // 70
  199. file.read((uint8_t *)&_prefs.telemetry_mode_env, sizeof(_prefs.telemetry_mode_env)); // 71
  200. file.read((uint8_t *)&_prefs.rx_delay_base, sizeof(_prefs.rx_delay_base)); // 72
  201. file.read((uint8_t *)&_prefs.advert_loc_policy, sizeof(_prefs.advert_loc_policy)); // 76
  202. file.read((uint8_t *)&_prefs.multi_acks, sizeof(_prefs.multi_acks)); // 77
  203. file.read(pad, 2); // 78
  204. file.read((uint8_t *)&_prefs.ble_pin, sizeof(_prefs.ble_pin)); // 80
  205. file.read((uint8_t *)&_prefs.buzzer_quiet, sizeof(_prefs.buzzer_quiet)); // 84
  206. file.read((uint8_t *)&_prefs.gps_enabled, sizeof(_prefs.gps_enabled)); // 85
  207. file.read((uint8_t *)&_prefs.gps_interval, sizeof(_prefs.gps_interval)); // 86
  208. file.read((uint8_t *)&_prefs.autoadd_config, sizeof(_prefs.autoadd_config)); // 87
  209. file.read((uint8_t *)&_prefs.sx126x_rx_boosted_gain, sizeof(_prefs.sx126x_rx_boosted_gain)); // 88
  210. file.close();
  211. }
  212. }
  213. void DataStore::savePrefs(const NodePrefs& _prefs, double node_lat, double node_lon) {
  214. File file = openWrite(_fs, "/new_prefs");
  215. if (file) {
  216. uint8_t pad[8];
  217. memset(pad, 0, sizeof(pad));
  218. file.write((uint8_t *)&_prefs.airtime_factor, sizeof(float)); // 0
  219. file.write((uint8_t *)_prefs.node_name, sizeof(_prefs.node_name)); // 4
  220. file.write(pad, 4); // 36
  221. file.write((uint8_t *)&node_lat, sizeof(node_lat)); // 40
  222. file.write((uint8_t *)&node_lon, sizeof(node_lon)); // 48
  223. file.write((uint8_t *)&_prefs.freq, sizeof(_prefs.freq)); // 56
  224. file.write((uint8_t *)&_prefs.sf, sizeof(_prefs.sf)); // 60
  225. file.write((uint8_t *)&_prefs.cr, sizeof(_prefs.cr)); // 61
  226. file.write(pad, 1); // 62
  227. file.write((uint8_t *)&_prefs.manual_add_contacts, sizeof(_prefs.manual_add_contacts)); // 63
  228. file.write((uint8_t *)&_prefs.bw, sizeof(_prefs.bw)); // 64
  229. file.write((uint8_t *)&_prefs.tx_power_dbm, sizeof(_prefs.tx_power_dbm)); // 68
  230. file.write((uint8_t *)&_prefs.telemetry_mode_base, sizeof(_prefs.telemetry_mode_base)); // 69
  231. file.write((uint8_t *)&_prefs.telemetry_mode_loc, sizeof(_prefs.telemetry_mode_loc)); // 70
  232. file.write((uint8_t *)&_prefs.telemetry_mode_env, sizeof(_prefs.telemetry_mode_env)); // 71
  233. file.write((uint8_t *)&_prefs.rx_delay_base, sizeof(_prefs.rx_delay_base)); // 72
  234. file.write((uint8_t *)&_prefs.advert_loc_policy, sizeof(_prefs.advert_loc_policy)); // 76
  235. file.write((uint8_t *)&_prefs.multi_acks, sizeof(_prefs.multi_acks)); // 77
  236. file.write(pad, 2); // 78
  237. file.write((uint8_t *)&_prefs.ble_pin, sizeof(_prefs.ble_pin)); // 80
  238. file.write((uint8_t *)&_prefs.buzzer_quiet, sizeof(_prefs.buzzer_quiet)); // 84
  239. file.write((uint8_t *)&_prefs.gps_enabled, sizeof(_prefs.gps_enabled)); // 85
  240. file.write((uint8_t *)&_prefs.gps_interval, sizeof(_prefs.gps_interval)); // 86
  241. file.write((uint8_t *)&_prefs.autoadd_config, sizeof(_prefs.autoadd_config)); // 87
  242. file.write((uint8_t *)&_prefs.sx126x_rx_boosted_gain, sizeof(_prefs.sx126x_rx_boosted_gain)); // 88
  243. file.close();
  244. }
  245. }
  246. void DataStore::loadContacts(DataStoreHost* host) {
  247. File file = openRead(_getContactsChannelsFS(), "/contacts3");
  248. if (file) {
  249. bool full = false;
  250. while (!full) {
  251. ContactInfo c;
  252. uint8_t pub_key[32];
  253. uint8_t unused;
  254. bool success = (file.read(pub_key, 32) == 32);
  255. success = success && (file.read((uint8_t *)&c.name, 32) == 32);
  256. success = success && (file.read(&c.type, 1) == 1);
  257. success = success && (file.read(&c.flags, 1) == 1);
  258. success = success && (file.read(&unused, 1) == 1);
  259. success = success && (file.read((uint8_t *)&c.sync_since, 4) == 4); // was 'reserved'
  260. success = success && (file.read((uint8_t *)&c.out_path_len, 1) == 1);
  261. success = success && (file.read((uint8_t *)&c.last_advert_timestamp, 4) == 4);
  262. success = success && (file.read(c.out_path, 64) == 64);
  263. success = success && (file.read((uint8_t *)&c.lastmod, 4) == 4);
  264. success = success && (file.read((uint8_t *)&c.gps_lat, 4) == 4);
  265. success = success && (file.read((uint8_t *)&c.gps_lon, 4) == 4);
  266. if (!success) break; // EOF
  267. c.id = mesh::Identity(pub_key);
  268. if (!host->onContactLoaded(c)) full = true;
  269. }
  270. file.close();
  271. }
  272. }
  273. void DataStore::saveContacts(DataStoreHost* host) {
  274. File file = openWrite(_getContactsChannelsFS(), "/contacts3");
  275. if (file) {
  276. uint32_t idx = 0;
  277. ContactInfo c;
  278. uint8_t unused = 0;
  279. while (host->getContactForSave(idx, c)) {
  280. bool success = (file.write(c.id.pub_key, 32) == 32);
  281. success = success && (file.write((uint8_t *)&c.name, 32) == 32);
  282. success = success && (file.write(&c.type, 1) == 1);
  283. success = success && (file.write(&c.flags, 1) == 1);
  284. success = success && (file.write(&unused, 1) == 1);
  285. success = success && (file.write((uint8_t *)&c.sync_since, 4) == 4);
  286. success = success && (file.write((uint8_t *)&c.out_path_len, 1) == 1);
  287. success = success && (file.write((uint8_t *)&c.last_advert_timestamp, 4) == 4);
  288. success = success && (file.write(c.out_path, 64) == 64);
  289. success = success && (file.write((uint8_t *)&c.lastmod, 4) == 4);
  290. success = success && (file.write((uint8_t *)&c.gps_lat, 4) == 4);
  291. success = success && (file.write((uint8_t *)&c.gps_lon, 4) == 4);
  292. if (!success) break; // write failed
  293. idx++; // advance to next contact
  294. }
  295. file.close();
  296. }
  297. }
  298. void DataStore::loadChannels(DataStoreHost* host) {
  299. File file = openRead(_getContactsChannelsFS(), "/channels2");
  300. if (file) {
  301. bool full = false;
  302. uint8_t channel_idx = 0;
  303. while (!full) {
  304. ChannelDetails ch;
  305. uint8_t unused[4];
  306. bool success = (file.read(unused, 4) == 4);
  307. success = success && (file.read((uint8_t *)ch.name, 32) == 32);
  308. success = success && (file.read((uint8_t *)ch.channel.secret, 32) == 32);
  309. if (!success) break; // EOF
  310. if (host->onChannelLoaded(channel_idx, ch)) {
  311. channel_idx++;
  312. } else {
  313. full = true;
  314. }
  315. }
  316. file.close();
  317. }
  318. }
  319. void DataStore::saveChannels(DataStoreHost* host) {
  320. File file = openWrite(_getContactsChannelsFS(), "/channels2");
  321. if (file) {
  322. uint8_t channel_idx = 0;
  323. ChannelDetails ch;
  324. uint8_t unused[4];
  325. memset(unused, 0, 4);
  326. while (host->getChannelForSave(channel_idx, ch)) {
  327. bool success = (file.write(unused, 4) == 4);
  328. success = success && (file.write((uint8_t *)ch.name, 32) == 32);
  329. success = success && (file.write((uint8_t *)ch.channel.secret, 32) == 32);
  330. if (!success) break; // write failed
  331. channel_idx++;
  332. }
  333. file.close();
  334. }
  335. }
  336. #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
  337. #define MAX_ADVERT_PKT_LEN (2 + 32 + PUB_KEY_SIZE + 4 + SIGNATURE_SIZE + MAX_ADVERT_DATA_SIZE)
  338. struct BlobRec {
  339. uint32_t timestamp;
  340. uint8_t key[7];
  341. uint8_t len;
  342. uint8_t data[MAX_ADVERT_PKT_LEN];
  343. };
  344. void DataStore::checkAdvBlobFile() {
  345. if (!_getContactsChannelsFS()->exists("/adv_blobs")) {
  346. File file = openWrite(_getContactsChannelsFS(), "/adv_blobs");
  347. if (file) {
  348. BlobRec zeroes;
  349. memset(&zeroes, 0, sizeof(zeroes));
  350. for (int i = 0; i < MAX_BLOBRECS; i++) { // pre-allocate to fixed size
  351. file.write((uint8_t *) &zeroes, sizeof(zeroes));
  352. }
  353. file.close();
  354. }
  355. }
  356. }
  357. void DataStore::migrateToSecondaryFS() {
  358. // migrate old adv_blobs, contacts3 and channels2 files to secondary FS if they don't already exist
  359. if (!_fsExtra->exists("/adv_blobs")) {
  360. if (_fs->exists("/adv_blobs")) {
  361. File oldAdvBlobs = openRead(_fs, "/adv_blobs");
  362. File newAdvBlobs = openWrite(_fsExtra, "/adv_blobs");
  363. if (oldAdvBlobs && newAdvBlobs) {
  364. BlobRec rec;
  365. size_t count = 0;
  366. // Copy 20 BlobRecs from old to new
  367. while (count < 20 && oldAdvBlobs.read((uint8_t *)&rec, sizeof(rec)) == sizeof(rec)) {
  368. newAdvBlobs.seek(count * sizeof(BlobRec));
  369. newAdvBlobs.write((uint8_t *)&rec, sizeof(rec));
  370. count++;
  371. }
  372. }
  373. if (oldAdvBlobs) oldAdvBlobs.close();
  374. if (newAdvBlobs) newAdvBlobs.close();
  375. _fs->remove("/adv_blobs");
  376. }
  377. }
  378. if (!_fsExtra->exists("/contacts3")) {
  379. if (_fs->exists("/contacts3")) {
  380. File oldFile = openRead(_fs, "/contacts3");
  381. File newFile = openWrite(_fsExtra, "/contacts3");
  382. if (oldFile && newFile) {
  383. uint8_t buf[64];
  384. int n;
  385. while ((n = oldFile.read(buf, sizeof(buf))) > 0) {
  386. newFile.write(buf, n);
  387. }
  388. }
  389. if (oldFile) oldFile.close();
  390. if (newFile) newFile.close();
  391. _fs->remove("/contacts3");
  392. }
  393. }
  394. if (!_fsExtra->exists("/channels2")) {
  395. if (_fs->exists("/channels2")) {
  396. File oldFile = openRead(_fs, "/channels2");
  397. File newFile = openWrite(_fsExtra, "/channels2");
  398. if (oldFile && newFile) {
  399. uint8_t buf[64];
  400. int n;
  401. while ((n = oldFile.read(buf, sizeof(buf))) > 0) {
  402. newFile.write(buf, n);
  403. }
  404. }
  405. if (oldFile) oldFile.close();
  406. if (newFile) newFile.close();
  407. _fs->remove("/channels2");
  408. }
  409. }
  410. // cleanup nodes which have been testing the extra fs, copy _main.id and new_prefs back to primary
  411. if (_fsExtra->exists("/_main.id")) {
  412. if (_fs->exists("/_main.id")) {_fs->remove("/_main.id");}
  413. File oldFile = openRead(_fsExtra, "/_main.id");
  414. File newFile = openWrite(_fs, "/_main.id");
  415. if (oldFile && newFile) {
  416. uint8_t buf[64];
  417. int n;
  418. while ((n = oldFile.read(buf, sizeof(buf))) > 0) {
  419. newFile.write(buf, n);
  420. }
  421. }
  422. if (oldFile) oldFile.close();
  423. if (newFile) newFile.close();
  424. _fsExtra->remove("/_main.id");
  425. }
  426. if (_fsExtra->exists("/new_prefs")) {
  427. if (_fs->exists("/new_prefs")) {_fs->remove("/new_prefs");}
  428. File oldFile = openRead(_fsExtra, "/new_prefs");
  429. File newFile = openWrite(_fs, "/new_prefs");
  430. if (oldFile && newFile) {
  431. uint8_t buf[64];
  432. int n;
  433. while ((n = oldFile.read(buf, sizeof(buf))) > 0) {
  434. newFile.write(buf, n);
  435. }
  436. }
  437. if (oldFile) oldFile.close();
  438. if (newFile) newFile.close();
  439. _fsExtra->remove("/new_prefs");
  440. }
  441. // remove files from where they should not be anymore
  442. if (_fs->exists("/adv_blobs")) {
  443. _fs->remove("/adv_blobs");
  444. }
  445. if (_fs->exists("/contacts3")) {
  446. _fs->remove("/contacts3");
  447. }
  448. if (_fs->exists("/channels2")) {
  449. _fs->remove("/channels2");
  450. }
  451. if (_fsExtra->exists("/_main.id")) {
  452. _fsExtra->remove("/_main.id");
  453. }
  454. if (_fsExtra->exists("/new_prefs")) {
  455. _fsExtra->remove("/new_prefs");
  456. }
  457. }
  458. uint8_t DataStore::getBlobByKey(const uint8_t key[], int key_len, uint8_t dest_buf[]) {
  459. File file = openRead(_getContactsChannelsFS(), "/adv_blobs");
  460. uint8_t len = 0; // 0 = not found
  461. if (file) {
  462. BlobRec tmp;
  463. while (file.read((uint8_t *) &tmp, sizeof(tmp)) == sizeof(tmp)) {
  464. if (memcmp(key, tmp.key, sizeof(tmp.key)) == 0) { // only match by 7 byte prefix
  465. len = tmp.len;
  466. memcpy(dest_buf, tmp.data, len);
  467. break;
  468. }
  469. }
  470. file.close();
  471. }
  472. return len;
  473. }
  474. bool DataStore::putBlobByKey(const uint8_t key[], int key_len, const uint8_t src_buf[], uint8_t len) {
  475. if (len < PUB_KEY_SIZE+4+SIGNATURE_SIZE || len > MAX_ADVERT_PKT_LEN) return false;
  476. checkAdvBlobFile();
  477. File file = _getContactsChannelsFS()->open("/adv_blobs", FILE_O_WRITE);
  478. if (file) {
  479. uint32_t pos = 0, found_pos = 0;
  480. uint32_t min_timestamp = 0xFFFFFFFF;
  481. // search for matching key OR evict by oldest timestmap
  482. BlobRec tmp;
  483. file.seek(0);
  484. while (file.read((uint8_t *) &tmp, sizeof(tmp)) == sizeof(tmp)) {
  485. if (memcmp(key, tmp.key, sizeof(tmp.key)) == 0) { // only match by 7 byte prefix
  486. found_pos = pos;
  487. break;
  488. }
  489. if (tmp.timestamp < min_timestamp) {
  490. min_timestamp = tmp.timestamp;
  491. found_pos = pos;
  492. }
  493. pos += sizeof(tmp);
  494. }
  495. memcpy(tmp.key, key, sizeof(tmp.key)); // just record 7 byte prefix of key
  496. memcpy(tmp.data, src_buf, len);
  497. tmp.len = len;
  498. tmp.timestamp = _clock->getCurrentTime();
  499. file.seek(found_pos);
  500. file.write((uint8_t *) &tmp, sizeof(tmp));
  501. file.close();
  502. return true;
  503. }
  504. return false; // error
  505. }
  506. bool DataStore::deleteBlobByKey(const uint8_t key[], int key_len) {
  507. return true; // this is just a stub on NRF52/STM32 platforms
  508. }
  509. #else
  510. inline void makeBlobPath(const uint8_t key[], int key_len, char* path, size_t path_size) {
  511. char fname[18];
  512. if (key_len > 8) key_len = 8; // just use first 8 bytes (prefix)
  513. mesh::Utils::toHex(fname, key, key_len);
  514. sprintf(path, "/bl/%s", fname);
  515. }
  516. uint8_t DataStore::getBlobByKey(const uint8_t key[], int key_len, uint8_t dest_buf[]) {
  517. char path[64];
  518. makeBlobPath(key, key_len, path, sizeof(path));
  519. if (_fs->exists(path)) {
  520. File f = openRead(_fs, path);
  521. if (f) {
  522. int len = f.read(dest_buf, 255); // currently MAX 255 byte blob len supported!!
  523. f.close();
  524. return len;
  525. }
  526. }
  527. return 0; // not found
  528. }
  529. bool DataStore::putBlobByKey(const uint8_t key[], int key_len, const uint8_t src_buf[], uint8_t len) {
  530. char path[64];
  531. makeBlobPath(key, key_len, path, sizeof(path));
  532. File f = openWrite(_fs, path);
  533. if (f) {
  534. int n = f.write(src_buf, len);
  535. f.close();
  536. if (n == len) return true; // success!
  537. _fs->remove(path); // blob was only partially written!
  538. }
  539. return false; // error
  540. }
  541. bool DataStore::deleteBlobByKey(const uint8_t key[], int key_len) {
  542. char path[64];
  543. makeBlobPath(key, key_len, path, sizeof(path));
  544. _fs->remove(path);
  545. return true; // return true even if file did not exist
  546. }
  547. #endif