MeshCoreTel-firmware/docs/kiss_modem_protocol.md

MeshCore KISS Modem Protocol

Standard KISS TNC firmware for MeshCore LoRa radios. Compatible with any KISS client (Direwolf, APRSdroid, YAAC, etc.) for sending and receiving raw packets. MeshCore-specific extensions (cryptography, radio configuration, telemetry) are available through the standard SetHardware (0x06) command.

Serial Configuration

115200 baud, 8N1, no flow control.

Frame Format

Standard KISS framing per the KA9Q/K3MC specification.

Byte	Name	Description
0xC0	FEND	Frame delimiter
0xDB	FESC	Escape character
0xDC	TFEND	Escaped FEND (FESC + TFEND = 0xC0)
0xDD	TFESC	Escaped FESC (FESC + TFESC = 0xDB)

┌──────┬───────────┬──────────────┬──────┐
│ FEND │ Type Byte │ Data (escaped)│ FEND │
│ 0xC0 │  1 byte   │ 0-510 bytes  │ 0xC0 │
└──────┴───────────┴──────────────┴──────┘

Type Byte

The type byte is split into two nibbles:

Bits	Field	Description
7-4	Port	Port number (0 for single-port TNC)
3-0	Command	Command number

Maximum unescaped frame size: 512 bytes.

Standard KISS Commands

Host to TNC

Command	Value	Data	Description
Data	0x00	Raw packet	Queue packet for transmission
TXDELAY	0x01	Delay (1 byte)	Transmitter keyup delay in 10ms units (default: 50 = 500ms)
Persistence	0x02	P (1 byte)	CSMA persistence parameter 0-255 (default: 63)
SlotTime	0x03	Interval (1 byte)	CSMA slot interval in 10ms units (default: 10 = 100ms)
TXtail	0x04	Delay (1 byte)	Post-TX hold time in 10ms units (default: 0)
FullDuplex	0x05	Mode (1 byte)	0 = half duplex, nonzero = full duplex (default: 0)
SetHardware	0x06	Sub-command + data	MeshCore extensions (see below)
Return	0xFF	-	Exit KISS mode (no-op)

TNC to Host

Type	Value	Data	Description
Data	0x00	Raw packet	Received packet from radio

Data frames carry raw packet data only, with no metadata prepended.

CSMA Behavior

The TNC implements p-persistent CSMA for half-duplex operation:

1. When a packet is queued, monitor carrier detect
2. When the channel clears, generate a random value 0-255
3. If the value is less than or equal to P (Persistence), wait TXDELAY then transmit
4. Otherwise, wait SlotTime and repeat from step 1

In full-duplex mode, CSMA is bypassed and packets transmit after TXDELAY.

SetHardware Extensions (0x06)

MeshCore-specific functionality uses the standard KISS SetHardware command. The first byte of SetHardware data is a sub-command. Standard KISS clients ignore these frames.

Frame Format

┌──────┬──────┬─────────────┬──────────────┬──────┐
│ FEND │ 0x06 │ Sub-command  │ Data (escaped)│ FEND │
│ 0xC0 │      │   1 byte    │   variable   │ 0xC0 │
└──────┴──────┴─────────────┴──────────────┴──────┘

Request Sub-commands (Host to TNC)

Sub-command	Value	Data
GetIdentity	0x01	-
GetRandom	0x02	Length (1 byte, 1-64)
VerifySignature	0x03	PubKey (32) + Signature (64) + Data
SignData	0x04	Data to sign
EncryptData	0x05	Key (32) + Plaintext
DecryptData	0x06	Key (32) + MAC (2) + Ciphertext
KeyExchange	0x07	Remote PubKey (32)
Hash	0x08	Data to hash
SetRadio	0x09	Freq (4) + BW (4) + SF (1) + CR (1)
SetTxPower	0x0A	Power dBm (1)
GetRadio	0x0C	-
GetTxPower	0x0D	-
GetVersion	0x0F	-
GetCurrentRssi	0x10	-
IsChannelBusy	0x11	-
GetAirtime	0x12	Packet length (1)
GetNoiseFloor	0x13	-
GetStats	0x14	-
GetBattery	0x15	-
Ping	0x16	-
GetSensors	0x17	Permissions (1)

Response Sub-commands (TNC to Host)

Sub-command	Value	Data
Identity	0x21	PubKey (32)
Random	0x22	Random bytes (1-64)
Verify	0x23	Result (1): 0x00=invalid, 0x01=valid
Signature	0x24	Signature (64)
Encrypted	0x25	MAC (2) + Ciphertext
Decrypted	0x26	Plaintext
SharedSecret	0x27	Shared secret (32)
Hash	0x28	SHA-256 hash (32)
OK	0x29	-
Radio	0x2A	Freq (4) + BW (4) + SF (1) + CR (1)
TxPower	0x2B	Power dBm (1)
Version	0x2D	Version (1) + Reserved (1)
Error	0x2E	Error code (1)
TxDone	0x2F	Result (1): 0x00=failed, 0x01=success
CurrentRssi	0x30	RSSI dBm (1, signed)
ChannelBusy	0x31	Result (1): 0x00=clear, 0x01=busy
Airtime	0x32	Milliseconds (4)
NoiseFloor	0x33	dBm (2, signed)
Stats	0x34	RX (4) + TX (4) + Errors (4)
Battery	0x35	Millivolts (2)
Pong	0x36	-
Sensors	0x37	CayenneLPP payload
RxMeta	0x38	SNR (1) + RSSI (1)

Error Codes

Code	Value	Description
InvalidLength	0x01	Request data too short
InvalidParam	0x02	Invalid parameter value
NoCallback	0x03	Feature not available
MacFailed	0x04	MAC verification failed
UnknownCmd	0x05	Unknown sub-command
EncryptFailed	0x06	Encryption failed

Unsolicited Events

The TNC sends these SetHardware frames without a preceding request:

TxDone (0x2F): Sent after a packet has been transmitted. Contains a single byte: 0x01 for success, 0x00 for failure.

RxMeta (0x38): Sent immediately after each standard data frame (type 0x00) with metadata for the received packet. Contains SNR (1 byte, signed, value x4 for 0.25 dB precision) followed by RSSI (1 byte, signed, dBm). Standard KISS clients ignore this frame.

Data Formats

Radio Parameters (SetRadio / Radio response)

All values little-endian.

Field	Size	Description
Frequency	4 bytes	Hz (e.g., 869618000)
Bandwidth	4 bytes	Hz (e.g., 62500)
SF	1 byte	Spreading factor (5-12)
CR	1 byte	Coding rate (5-8)

Stats (Stats response)

All values little-endian.

Field	Size	Description
RX	4 bytes	Packets received
TX	4 bytes	Packets transmitted
Errors	4 bytes	Receive errors

Sensor Permissions (GetSensors)

Bit	Value	Description
0	0x01	Base (battery)
1	0x02	Location (GPS)
2	0x04	Environment (temp, humidity, pressure)

Use 0x07 for all permissions.

Sensor Data (Sensors response)

Data returned in CayenneLPP format. See CayenneLPP documentation for parsing.

Notes

• Modem generates identity on first boot (stored in flash)
• SNR values in RxMeta are multiplied by 4 for 0.25 dB precision
• TxDone is sent as a SetHardware event after each transmission
• Standard KISS clients receive only type 0x00 data frames and can safely ignore all SetHardware (0x06) frames
• See packet_structure.md for packet format