# Repeater Web Panel

This page is for end users running an EastMesh `*_repeater_mqtt` build with the local web panel enabled.

It covers how to reach the panel, what each section does, and what to expect when using it on desktop or mobile.

## What It Is

The repeater web panel is a local HTTPS configuration page served directly by the repeater over WiFi.

It gives you:

- a password-gated local admin page
- quick `get` commands for common repeater and MQTT checks
- a terminal-style CLI panel for allowlisted commands
- editable repeater settings
- editable MQTT settings
- a stats dashboard with Wi-Fi, core, radio, memory, and packet views

## Screenshot Overview

The layout below reflects the current panel structure for the repeater web UI.

![Repeater web panel overview](./_assets/repeater_web_panel_overview.png)

## Requirements

You need:

- a supported `*_repeater_mqtt` firmware build
- WiFi configured on the repeater
- the repeater connected to your local network
- the repeater admin password

Some constrained targets disable the web panel to stay within flash limits. If your board does not support it, `get web.status` will not show it as available.

## How To Open It

1. Connect the repeater to WiFi.
2. Find its IP address.
3. Open `https://<repeater-ip>/` in a browser.
4. Accept the browser warning for the self-signed certificate.
5. Enter the repeater admin password.

Useful CLI commands:

- `get wifi.status`
  - shows WiFi state and IP address when connected
- `get web.status`
  - shows whether the web panel is up and which URL to use

Example:

- `https://10.33.135.208/`

## Login And Security

- the panel uses the same admin password as the repeater CLI
- the connection is HTTPS, but the certificate is self-signed
- browsers will warn the first time you connect
- the panel only exposes an allowlisted subset of CLI commands

This is intended for local admin use on a trusted network, not for open internet exposure.

## Actions

The Actions panel gives you the most common operational controls:

- `Advert`
- `Start OTA`
- `Reboot`
- `Logout`
- theme toggle

Use `Start OTA` only when you intend to update firmware.

## Quick "get" Commands

This section runs common read-only commands for:

- Wi-Fi
- MQTT

These are useful for quick checks without typing into the CLI field.

## Run CLI Command

This is a small terminal for allowlisted commands.

- press `Enter` to run the command
- command history is shown in the terminal box below
- save buttons elsewhere in the page also show the generated command and the reply here
- `clock` is available here if you want to check the repeater's current board time

This makes it easy to see exactly what the panel sent to the repeater.

## Repeater Settings

This section includes:

- Device Name
- Latitude
- Longitude
- Guest Password
- Private Key
- Advert Interval
- Flood Interval
- Flood Max
- Owner Info

Notes:

- `Latitude` and `Longitude` default to `0.0` as placeholders
- changing the private key requires a reboot to apply
- the refresh buttons load the current value from the repeater
- the save buttons send the matching CLI command immediately

## MQTT Settings

This section includes:

- `mqtt.iata`
  - selected from a curated east-coast/south-east list
- `mqtt.owner`
  - owner public key
- `mqtt.email`
  - owner contact email
- MQTT server toggles
  - `eastmesh-au`
  - `letsmesh-eu`
  - `letsmesh-us`

`MEL` is used as the default dropdown option until the repeater's saved value is loaded.

Notes:

- the current MQTT server states are loaded when the page opens
- you can toggle each MQTT server on or off from this panel
- if all three servers are enabled at once, the panel shows a warning recommending two at most

## Stats

Press `Get Stats` to load the dashboard.

The stats page currently shows:

- Core
- Radio
- Memory
- Wi-Fi
- Packets

The dashboard is designed to work well on phones as well as desktop browsers.

## Mobile Use

The page is responsive and should work cleanly on a phone.

On mobile:

- quick command buttons collapse into a two-column layout
- action buttons stack more cleanly
- input rows stay usable for touch interaction
- stats cards reorganize into single-column sections where needed

## Common Tasks

### Check WiFi And MQTT

1. Open the panel.
2. Press `wifi.status` in Quick `get` Commands.
3. Press `mqtt.status` in Quick `get` Commands.
4. Press `Get Stats` for the dashboard view.

### Change Device Name

1. Edit `Device Name`.
2. Press `Save`.
3. Confirm the generated command and reply in the CLI terminal box.

### Update MQTT Owner Or Email

1. Go to `MQTT Settings`.
2. Enter the new value.
3. Press `Save`.
4. Use the refresh button if you want to re-read the stored value from the repeater.

### Start OTA

1. Press `Start OTA`.
2. Confirm the action.
3. Continue with your normal OTA workflow.

## Troubleshooting

### The browser warns about the certificate

That is expected. The panel uses a self-signed certificate generated for local use.

### I cannot reach the page

Check:

- the repeater is on WiFi
- the IP address from `get wifi.status`
- `get web.status` reports the panel as up
- your board/firmware target supports the web panel

### The panel opens but login fails

Use the repeater admin password, not the guest password.

### A command says it is not allowlisted

The panel intentionally limits what can be run from the browser. Use the serial CLI for commands outside the web allowlist. `clock` is included, but most maintenance and debug commands are still serial-only.

### Stats or settings do not refresh

Try:

- refreshing the browser tab
- logging out and back in
- checking WiFi stability with `get wifi.status`

## Related Docs

- [Custom CLI Commands](./custom-cli.md)
- [Download and Flash Releases](./releases.md)
- [Build Locally With uv](./local-builds.md)