# MeshCore-EastMesh-MeshCoreTel

This is a fork of MeshCore-EastMesh firmware with MeshCoreTel broker support.

Original firmware (credits to Jared Dohrman, Scott Powell / Ripple Radios and the MeshCore contributors):

- <https://github.com/xJARiD/MeshCore-EastMesh>

MeshCoreTel:

- <https://meshcoretel.ru/>

EastMesh firmware builds for MeshCore, with MQTT repeaters, WiFi companions, and simple release downloads for supported boards.

This repository keeps the upstream MeshCore firmware intact and adds an EastMesh layer on top for packaging, release automation, WiFi-enabled companion builds, and MQTT-enabled repeater builds.

Additinally, the MeshCoreTel broker added in this fork.

## What This Repo Adds

- `*_repeater_mqtt` firmware targets with:
  - native WiFi
  - MQTT over WSS with JWT auth or over plain TCP (for MeshCoreTel support)
  - optional local HTTPS config panel on supported ESP32 targets
- `*_companion_radio_wifi` firmware targets for WiFi-connected companion devices
- EastMesh-specific release workflows and versioning on top of upstream MeshCore releases
- docs and release guidance for EastMesh users instead of the full upstream MeshCore docs set

## Status

I've tested it only with my Heltec V4.

## Key Files

- [`build.sh`](./build.sh)
  - main local build wrapper
  - injects `FIRMWARE_VERSION`, `CLIENT_VERSION`, and EastMesh release metadata
- [`pyproject.toml`](./pyproject.toml)
  - Python tooling and docs dependencies
- [`platformio.ini`](./platformio.ini)
  - root PlatformIO config and ESP32 helper scripts
- [`variants/eastmesh_mqtt/platformio.ini`](./variants/eastmesh_mqtt/platformio.ini)
  - shared EastMesh MQTT repeater env definitions
- [`examples/simple_repeater/MyMesh.cpp`](./examples/simple_repeater/MyMesh.cpp)
  - repeater CLI wiring, MQTT command surface, and web allowlist integration
- [`src/helpers/mqtt/MQTTUplink.cpp`](./src/helpers/mqtt/MQTTUplink.cpp)
  - MQTT uplink implementation, HTTPS web panel, WSS/JWT handling, and repeater WiFi control
- [`examples/companion_radio`](./examples/companion_radio)
  - companion firmware implementation
- [`RELEASE.md`](./RELEASE.md)
  - tag formats and release workflow behavior
- [`docs/`](./docs)
  - EastMesh-focused docs published to GitHub Pages

## Key EastMesh Features

### MQTT Repeater Additions

- hardcoded broker support for:
  - `meshcoretel`
  - `eastmesh-au`
  - `letsmesh-eu`
  - `letsmesh-us`
- WSS transport at `/mqtt`
- JWT auth using the device identity
- CLI controls for:
  - WiFi credentials
  - WiFi powersaving
  - board battery reporting on supported targets
  - MQTT endpoint enablement
  - MQTT packet and raw publishing
  - owner public key and email
  - local web panel enablement

### Local Web Panel

On supported `*_repeater_mqtt` ESP32 targets, the repeater can expose a local HTTPS config panel over WiFi.

Features include:

- password-gated access using the existing repeater admin password
- allowlisted CLI execution
- grouped quick actions
- light and dark themes
- optional disable via `set web off`

Recommended use is initial setup and occasional troubleshooting. On MQTT repeater deployments, disable the panel again when finished if you want maximum MQTT heap headroom.

### Companion WiFi Additions

`*_companion_radio_wifi` targets now support persisted WiFi rescue commands:

- open a serial monitor at `115200` baud
- reboot the device
- long-press the user button within the first 8 seconds after boot to enter `CLI Rescue`
- wait for `========= CLI Rescue =========`
- send the commands from the serial monitor

These rescue commands are only available after entering `CLI Rescue`:

- `get wifi.status`
- `get wifi.ssid`
- `get wifi.powersaving`
- `set wifi.ssid <ssid>`
- `set wifi.pwd <password>`
- `set wifi.powersaving none|min|max`

## Active GitHub Workflows

- `.github/workflows/build-companion-wifi-firmwares.yml`
- `.github/workflows/build-repeater-mqtt-firmwares.yml`
- `.github/workflows/pr-build-check.yml`
- `.github/workflows/push-build-check.yml`
- `.github/workflows/github-pages.yml`

The current release workflows intentionally focus only on:

- `companion-wifi`
- `repeater-mqtt`

## Release Tags

Current release tags are:

```bash
git tag companion-wifi-v1.14.1
git tag repeater-mqtt-eastmesh-v1.0.1
```

Companion WiFi uses the upstream MeshCore version in the tag.

Repeater MQTT uses:

- `OFFICIAL_MESHCORE_VERSION` from GitHub Actions variables as `FIRMWARE_VERSION`
- the EastMesh tag version as `EASTMESH_VERSION`

See [RELEASE.md](./RELEASE.md) for the full release flow.

## Documentation

Published docs site:

- <https://xjarid.github.io/MeshCore-EastMesh/>

Current docs pages:

- [Home](./docs/index.md)
- [Download and Flash Releases](./docs/releases.md)
- [Build Locally With uv](./docs/local-builds.md)
- [Custom CLI Commands](./docs/custom-cli.md)