Track CPU utilisation on core 0 using a FreeRTOS tick hook that
increments per-tick idle/busy counters, sampled every 5s by an
esp_timer callback. Exponential moving averages with Linux-style
time constants (1 / 5 / 15 min) are maintained in software:
DECAY1 = exp(-5/60) ≈ 0.9200 (1-minute window)
DECAY5 = exp(-5/300) ≈ 0.9835 (5-minute window)
DECAY15 = exp(-5/900) ≈ 0.9945 (15-minute window)
Core 1 is excluded intentionally: it runs the Arduino loopTask at
100% load for LoRa packet processing, so its figure is always 1.0
and carries no diagnostic value. All other tasks are pinned to
core 0 by task_pinning.c, so core-0 load reflects the true system
utilisation.
New files:
arch/esp32/CPUUsageTracker.h – class declaration
arch/esp32/CPUUsageTracker.cpp – tick hook + esp_timer sampling
Integration:
MyMesh::begin() calls _cpu_tracker.begin() on ESP32 builds.
formatStatsReply() emits "load_avg":[<1m>,<5m>,<15m>] in the
compact stats JSON payload.
formatWebStatsSummaryJson() adds the same field to the web-panel
stats endpoint under core.load_avg.
The web-panel HUD gains a "Load Avg" metric tile showing all
three values side-by-side; the core-metrics grid is widened from
4 to 5 columns. The tile is rendered conditionally so older
firmware (or non-ESP32 builds) that omit the field degrade
gracefully.
CPUUsageTracker.cpp is added to the esp32_base build_src_filter
in platformio.ini.
* room server: added RegionMap, and new CommonCLI wiring, default_scope handling
* sensor: only minimal RegionMap wiring. Still needs work to handle default-scope
Instead of overloading getOutboundCount() with a magic sentinel value,
add a dedicated getOutboundTotal() method to the PacketManager interface
that returns the total queue size without time filtering.
This eliminates the fragile convention that caused the regression and
makes the two operations — time-filtered count vs total count —
explicitly separate in the API.
This change addresses two issues. The first is that the
LilyGo_TLora_V2_1_1_6_terminal_chat build would try to compile
simple_repeater/MyMesh.cpp. All other examples of terminal chat
targets are instead building simple_secure_chat/main.cpp . This
change would align this build to the rest of the builds.
The second issue, found during the course of investigating the
first, stems from simple_repeater/MyMesh.cpp using the
MAX_NEIGHBOURS #define to control whether the neighbor list is kept.
Repeaters that keep this list must define this value, and if the
value is not defined, then all neighbor-related functionality is
compiled out. However, the code that replies to
REQ_TYPE_GET_NEIGHBOURS did not properly check for this #define,
and thus any target that compiles simple_repeater/MyMesh.cpp
without defining MAX_NEIGHBOURS would get an undefined variable
compilation error.
As a practical matter though, there are no targets that compile
simple_repeater/MyMesh.cpp AND do not define MAX_NEIGHBOURS,
except this build due to the first issue. As a result, the
second issue is addressed only as a matter of completeness. The
expected behavior with this change is that such a repeater would
send a valid reply indicating zero known neighbors.
Valentin V. Bartenev