updated variant rak3401

boards/rak3401.json

@@ -0,0 +1,72 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      [
+        "0x239A",
+        "0x8029"
+      ],
+      [
+        "0x239A",
+        "0x0029"
+      ],
+      [
+        "0x239A",
+        "0x002A"
+      ],
+      [
+        "0x239A",
+        "0x802A"
+      ]
+    ],
+    "usb_product": "WisCore RAK3401 Board",
+    "mcu": "nrf52840",
+    "variant": "WisCore_RAK3401_Board",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": [
+    "bluetooth"
+  ],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "WisCore RAK3401 Board",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.rakwireless.com",
+  "vendor": "RAKwireless"
+}

variants/rak3401/RAK3401Board.cpp

@@ -20,18 +20,13 @@ void RAK3401Board::begin() {
 
   Wire.begin();
 
-  // Enable 3.3V periphery power rail (GPS, IO Module, etc.)
   pinMode(PIN_3V3_EN, OUTPUT);
   digitalWrite(PIN_3V3_EN, HIGH);
 
-  pinMode(SX126X_POWER_EN, OUTPUT);
-  digitalWrite(SX126X_POWER_EN, HIGH);
-  delay(10);   // give sx1262 some time to power up
-
 #ifdef P_LORA_PA_EN
   // Initialize RAK13302 1W LoRa transceiver module PA control pin
   pinMode(P_LORA_PA_EN, OUTPUT);
   digitalWrite(P_LORA_PA_EN, LOW);  // Start with PA disabled
   delay(10);  // Allow PA module to initialize
 #endif
-}
+}

variants/rak3401/RAK3401Board.h

@@ -4,45 +4,34 @@
 #include <Arduino.h>
 #include <helpers/NRF52Board.h>
 
-// LoRa radio module pins for RAK3401 with RAK13302 (uses SPI1)
-#define  P_LORA_DIO_1   10
+// LoRa radio module pins for RAK13302
+#define  P_LORA_SCLK    3
+#define  P_LORA_MISO    29
+#define  P_LORA_MOSI    30
 #define  P_LORA_NSS     26
-#define  P_LORA_RESET   4
+#define  P_LORA_DIO_1   10
 #define  P_LORA_BUSY    9
-#define  P_LORA_SCLK    3   // SPI1_SCK
-#define  P_LORA_MISO    29  // SPI1_MISO
-#define  P_LORA_MOSI    30  // SPI1_MOSI
-#define  SX126X_POWER_EN  21
+#define  P_LORA_RESET   4
+#ifndef  P_LORA_PA_EN
+  #define  P_LORA_PA_EN  31
+#endif
 
 //#define PIN_GPS_SDA       13  //GPS SDA pin (output option)
 //#define PIN_GPS_SCL       14  //GPS SCL pin (output option)
-//#define PIN_GPS_TX        16  //GPS TX pin
-//#define PIN_GPS_RX        15  //GPS RX pin
+// #define PIN_GPS_TX        16  //GPS TX pin
+// #define PIN_GPS_RX        15  //GPS RX pin
 #define PIN_GPS_1PPS      17  //GPS PPS pin
 #define GPS_BAUD_RATE   9600
 #define GPS_ADDRESS   0x42  //i2c address for GPS
 
-// RAK13302 1W LoRa transceiver module PA control (WisBlock IO slot)
-// The RAK13302 mounts to the IO slot and has an ANT_SW (antenna switch) pin that controls the PA
-// This pin must be controlled during transmission to enable the 1W power amplifier
-//
-// According to RAK13302 datasheet: ANT_SW connects to IO3 on the IO slot
-// RAK19007 base board pin mapping: IO3 = pin 31 (also available as AIN1/A1 for analog input)
-//
-// Default: Pin 31 (IO3) - ANT_SW pin from RAK13302 datasheet
-// Override by defining P_LORA_PA_EN in platformio.ini if needed
-#ifndef P_LORA_PA_EN
-  #define P_LORA_PA_EN  31  // ANT_SW pin from RAK13302 datasheet (IO3, pin 31 on RAK19007)
-#endif
-
-#define SX126X_DIO2_AS_RF_SWITCH  true
+#define SX126X_DIO2_AS_RF_SWITCH
 #define SX126X_DIO3_TCXO_VOLTAGE   1.8
 
+
 // built-ins
 #define  PIN_VBAT_READ    5
 #define  ADC_MULTIPLIER   (3 * 1.73 * 1.187 * 1000)
 
-// 3.3V periphery enable (GPS, IO Module, etc.)
 #define PIN_3V3_EN (34)
 #define WB_IO2 PIN_3V3_EN
 

variants/rak3401/platformio.ini

@@ -1,20 +1,12 @@
 [rak3401]
 extends = nrf52_base
-board = rak4631
+board = rak3401
 board_check = true
 build_flags = ${nrf52_base.build_flags}
   ${sensor_base.build_flags}
   -I variants/rak3401
-  -D RAK_4631
   -D RAK_3401
   -D RAK13302
-  -D RAK_BOARD
-  -D PIN_BOARD_SCL=14
-  -D PIN_BOARD_SDA=13
-  -D PIN_GPS_TX=PIN_SERIAL1_RX
-  -D PIN_GPS_RX=PIN_SERIAL1_TX
-  -D PIN_GPS_EN=-1
-  -D PIN_OLED_RESET=-1
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22

variants/rak3401/target.cpp

@@ -17,8 +17,6 @@ RAK3401Board board;
   #endif
 #endif
 
-// RAK3401 uses SPI1 for the RAK13302 LoRa module
-// Note: nRF52 doesn't have a separate SPI1 object, so we use SPI but configure it with SPI1 pins
 RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
 
 WRAPPER_CLASS radio_driver(radio, board);
@@ -36,12 +34,6 @@ AutoDiscoverRTCClock rtc_clock(fallback_clock);
 
 bool radio_init() {
   rtc_clock.begin(Wire);
-
-  // Configure SPI with SPI1 pins for RAK13302
-  // nRF52 uses the same SPI peripheral but with different pin assignments
-  SPI.setPins(P_LORA_MISO, P_LORA_SCLK, P_LORA_MOSI);
-  SPI.begin();
-
   return radio.std_init(&SPI);
 }
 

variants/rak3401/variant.cpp

@@ -7,37 +7,46 @@
   modify it under the terms of the GNU Lesser General Public
   License as published by the Free Software Foundation; either
   version 2.1 of the License, or (at your option) any later version.
+
   This library is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
   See the GNU Lesser General Public License for more details.
+
   You should have received a copy of the GNU Lesser General Public
   License along with this library; if not, write to the Free Software
   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 */
 
 #include "variant.h"
-#include "nrf.h"
 #include "wiring_constants.h"
 #include "wiring_digital.h"
+#include "nrf.h"
+
+const uint32_t g_ADigitalPinMap[] =
+{
+  // P0
+  0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 ,
+  8 , 9 , 10, 11, 12, 13, 14, 15,
+  16, 17, 18, 19, 20, 21, 22, 23,
+  24, 25, 26, 27, 28, 29, 30, 31,
 
-const uint32_t g_ADigitalPinMap[] = {
-    // P0
-    0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+  // P1
+  32, 33, 34, 35, 36, 37, 38, 39,
+  40, 41, 42, 43, 44, 45, 46, 47
+};
 
-    // P1
-    32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
 
 void initVariant()
 {
-    // LED1 & LED2
-    pinMode(PIN_LED1, OUTPUT);
-    ledOff(PIN_LED1);
+  // LED1 & LED2
+  pinMode(PIN_LED1, OUTPUT);
+  ledOff(PIN_LED1);
 
-    pinMode(PIN_LED2, OUTPUT);
-    ledOff(PIN_LED2);
+  pinMode(PIN_LED2, OUTPUT);
+  ledOff(PIN_LED2);
 
-    // 3V3 Power Rail
-    pinMode(PIN_3V3_EN, OUTPUT);
-    digitalWrite(PIN_3V3_EN, HIGH);
+  // 3V3 Power Rail
+  pinMode(PIN_3V3_EN, OUTPUT);
+  digitalWrite(PIN_3V3_EN, HIGH);
 }

variants/rak3401/variant.h

@@ -34,7 +34,8 @@
 #include "WVariant.h"
 
 #ifdef __cplusplus
-extern "C" {
+extern "C"
+{
 #endif // __cplusplus
 
 // Number of pins defined in PinDescription array
@@ -58,8 +59,8 @@ extern "C" {
 /*
  * Analog pins
  */
-#define PIN_A0 (5)
-#define PIN_A1 (31)
+#define PIN_A0 (5)	//(3)
+#define PIN_A1 (31) //(4)
 #define PIN_A2 (28)
 #define PIN_A3 (29)
 #define PIN_A4 (30)
@@ -67,14 +68,14 @@ extern "C" {
 #define PIN_A6 (0xff)
 #define PIN_A7 (0xff)
 
-static const uint8_t A0 = PIN_A0;
-static const uint8_t A1 = PIN_A1;
-static const uint8_t A2 = PIN_A2;
-static const uint8_t A3 = PIN_A3;
-static const uint8_t A4 = PIN_A4;
-static const uint8_t A5 = PIN_A5;
-static const uint8_t A6 = PIN_A6;
-static const uint8_t A7 = PIN_A7;
+	static const uint8_t A0 = PIN_A0;
+	static const uint8_t A1 = PIN_A1;
+	static const uint8_t A2 = PIN_A2;
+	static const uint8_t A3 = PIN_A3;
+	static const uint8_t A4 = PIN_A4;
+	static const uint8_t A5 = PIN_A5;
+	static const uint8_t A6 = PIN_A6;
+	static const uint8_t A7 = PIN_A7;
 #define ADC_RESOLUTION 14
 
 // Other pins
@@ -92,6 +93,7 @@ static const uint8_t AREF = PIN_AREF;
 /*
  * Serial interfaces
  */
+// TXD1 RXD1 on Base Board
 #define PIN_SERIAL1_RX (15)
 #define PIN_SERIAL1_TX (16)
 
@@ -108,15 +110,14 @@ static const uint8_t AREF = PIN_AREF;
 #define PIN_SPI_MOSI (44)
 #define PIN_SPI_SCK (43)
 
-// SPI1 pins for RAK13302 1W LoRa module
-#define PIN_SPI1_MISO (29) // (0 + 29)
-#define PIN_SPI1_MOSI (30) // (0 + 30)
-#define PIN_SPI1_SCK (3)   // (0 + 3)
+#define PIN_SPI1_MISO (29)
+#define PIN_SPI1_MOSI (30)
+#define PIN_SPI1_SCK (3)
 
-static const uint8_t SS = 42;
-static const uint8_t MOSI = PIN_SPI_MOSI;
-static const uint8_t MISO = PIN_SPI_MISO;
-static const uint8_t SCK = PIN_SPI_SCK;
+	static const uint8_t SS = 42;
+	static const uint8_t MOSI = PIN_SPI_MOSI;
+	static const uint8_t MISO = PIN_SPI_MISO;
+	static const uint8_t SCK = PIN_SPI_SCK;
 
 /*
  * Wire Interfaces
@@ -127,6 +128,7 @@ static const uint8_t SCK = PIN_SPI_SCK;
 #define PIN_WIRE_SCL (WB_I2C1_SCL)
 
 // QSPI Pins
+// QSPI occupied by GPIO's
 #define PIN_QSPI_SCK 3
 #define PIN_QSPI_CS 26
 #define PIN_QSPI_IO0 30
@@ -135,35 +137,25 @@ static const uint8_t SCK = PIN_SPI_SCK;
 #define PIN_QSPI_IO3 2
 
 // On-board QSPI Flash
+// No onboard flash
 #define EXTERNAL_FLASH_DEVICES IS25LP080D
 #define EXTERNAL_FLASH_USE_QSPI
 
-// RAK13302 1W LoRa transceiver module (uses SPI1)
-// LoRa radio module pins for RAK3401 with RAK13302
-#define  P_LORA_DIO_1   10
-#define  P_LORA_NSS     26
-#define  P_LORA_RESET   4
-#define  P_LORA_BUSY    9
-#define  P_LORA_SCLK    PIN_SPI1_SCK  // 3
-#define  P_LORA_MISO    PIN_SPI1_MISO  // 29
-#define  P_LORA_MOSI    PIN_SPI1_MOSI  // 30
-#define  SX126X_POWER_EN  21
-
-// RAK13302 1W LoRa transceiver module PA control (WisBlock IO slot)
-// The RAK13302 mounts to the IO slot and has an ANT_SW (antenna switch) pin that controls the PA
-// This pin must be controlled during transmission to enable the 1W power amplifier
-//
-// According to RAK13302 datasheet: ANT_SW connects to IO3 on the IO slot
-// RAK19007 base board pin mapping: IO3 = pin 31 (also available as AIN1/A1 for analog input)
-//
-// Default: Pin 31 (IO3) - ANT_SW pin from RAK13302 datasheet
-// Override by defining P_LORA_PA_EN in platformio.ini if needed
-#ifndef P_LORA_PA_EN
-  #define P_LORA_PA_EN  31  // ANT_SW pin from RAK13302 datasheet (IO3, pin 31 on RAK19007)
-#endif
+#define P_LORA_SCK PIN_SPI1_SCK
+#define P_LORA_MISO PIN_SPI1_MISO
+#define P_LORA_MOSI PIN_SPI1_MOSI
+#define P_LORA_CS 26
+
+#define USE_SX1262
+#define SX126X_CS (26)
+#define SX126X_DIO1 (10)
+#define SX126X_BUSY (9)
+#define SX126X_RESET (4)
 
-#define SX126X_DIO2_AS_RF_SWITCH  true
-#define SX126X_DIO3_TCXO_VOLTAGE   1.8
+#define SX126X_POWER_EN (21)
+// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
 
 // enables 3.3V periphery like GPS or IO Module
 // Do not toggle this for GPS power savings
@@ -178,8 +170,8 @@ static const uint8_t SCK = PIN_SPI_SCK;
 // Power is on the controllable 3V3_S rail
 #define PIN_GPS_PPS (17) // Pulse per second input from the GPS
 
-#define GPS_RX_PIN PIN_SERIAL1_RX
-#define GPS_TX_PIN PIN_SERIAL1_TX
+#define PIN_GPS_RX PIN_SERIAL1_RX
+#define PIN_GPS_TX PIN_SERIAL1_TX
 
 // Battery
 // The battery sense is hooked to pin A0 (5)