docs: add MeshCore board signal tables and normalise size formatting

docs/_stylesheets/extra.css

@@ -198,7 +198,7 @@ body {
 }
 
 .md-typeset code,
-.md-typeset pre > code {
+.md-typeset pre>code {
     border-radius: 10px;
 }
 
@@ -247,6 +247,7 @@ body {
 }
 
 @media screen and (max-width: 76.2344em) {
+
     .md-content__inner,
     .md-sidebar__scrollwrap {
         border-radius: 14px;

docs/boards.md

@@ -15,12 +15,11 @@ The tables below are built from the repo's PlatformIO board metadata and variant
 - `MCU` shows the chip family only. Actual runtime clock can vary by env and board configuration.
 - `RAM` is the MCU's built-in RAM.
 - `PSRAM` is extra memory on some boards. More PSRAM usually means more headroom for UI, MQTT, and future features.
-
-If a board enables PSRAM but the repo does not declare the exact size, it is shown as `Yes (size not declared)`.
+- `GPS` uses `✅` when present and is blank when absent.
 
 ## Start Here
 
-- Pick an `ESP32-S3` board with `16MB` flash and PSRAM if you want the most headroom for MQTT plus UI: `heltec_v4_tft`, `heltec_v4`, `Station_G2`, `T_Beam_S3_Supreme_SX1262`.
+- Pick an `ESP32-S3` board with `16MB` flash and PSRAM if you want strong overall headroom for MQTT plus UI: `heltec_v4_tft`, `heltec_v4`, `Station_G2`, `LilyGo_TBeam_1W`.
 - Pick a TFT board if this will be used as a human-facing companion or field node: `heltec_v4_tft`, `heltec_tracker_v2`, `LilyGo_TDeck`, `Heltec_T190`.
 - Pick e-paper if you want a status screen with lower idle draw and less frequent refresh: `Heltec_E213`, `Heltec_E290`, `Heltec_Wireless_Paper`, `ThinkNode_M5`.
 - Pick a headless board if this is mainly a fixed MQTT gateway and screen space is not useful: `Xiao_C3`, `RAK_3112`, `Tenstar_C3`, `Heltec_ct62`, `Generic_E22`.
@@ -28,52 +27,106 @@ If a board enables PSRAM but the repo does not declare the exact size, it is sho
 - Pick a GPS-capable board if location-aware/mobile use matters: the T-Beam family, `heltec_tracker_v2`, `Heltec_v3`, `heltec_v4`, `Station_G2`, `ThinkNode_M5`.
 - If you want the most conservative, older radio family choices, the `SX1276` boards are `LilyGo_TLora_V2_1_1_6`, `Tbeam_SX1276`, and `Heltec_v2`.
 
+## Additional Signals
+
+If you are deciding between otherwise similar boards, these target-level settings often matter more than flash alone.
+
+- `CPU cfg` is the runtime clock MeshCore sets for that target. `default` means MeshCore does not override the board's default clock.
+- `TX cfg` is MeshCore's configured `LORA_TX_POWER`, not guaranteed antenna output. Boards with a PA or RF front-end may radiate much more than the configured value suggests.
+- `Power` is how the target exposes power in the repo: `ADC batt`, `PMU`, `custom 2S`, `fixed/ext`, or `none`.
+- `Extras` lists notable RF or peripheral extras exposed by the target, such as `PA/FEM`, `RF switch`, `BME280`, `NeoPixel`, or `ext ant`.
+
+| Target                   | CPU cfg | TX cfg       | Power     | Extras    |
+| ------------------------ | ------- | ------------ | --------- | --------- |
+| Ebyte_EoRa-S3            | default | 22 dBm cfg   | ADC batt  |           |
+| Generic_E22_sx1262       | default | 22 dBm cfg   | ADC batt  | RF switch |
+| Generic_E22_sx1268       | default | 22 dBm cfg   | ADC batt  | RF switch |
+| Heltec_ct62              | 80 MHz  | 22 dBm cfg   | ADC batt  |           |
+| Heltec_E213              | default | 22 dBm cfg   | ADC batt  |           |
+| Heltec_E290              | default | 22 dBm cfg   | ADC batt  |           |
+| Heltec_T190              | default | 22 dBm cfg   | ADC batt  |           |
+| heltec_tracker_v2        | 160 MHz | 9 dBm cfg\*  | ADC batt  | PA/FEM    |
+| Heltec_v2                | default | 20 dBm cfg   | ADC batt  |           |
+| Heltec_v3                | 80 MHz  | 22 dBm cfg   | ADC batt  |           |
+| heltec_v4                | 80 MHz  | 10 dBm cfg\* | ADC batt  | PA/FEM    |
+| heltec_v4_tft            | 80 MHz  | 10 dBm cfg\* | ADC batt  | PA/FEM    |
+| Heltec_Wireless_Paper    | default | 22 dBm cfg   | ADC batt  |           |
+| Heltec_Wireless_Tracker  | 80 MHz  | 22 dBm cfg   | none      |           |
+| Heltec_WSL3              | 80 MHz  | 22 dBm cfg   | ADC batt  |           |
+| LilyGo_T3S3_sx1262       | default | 22 dBm cfg   | ADC batt  |           |
+| LilyGo_T3S3_sx1276       | default | 20 dBm cfg   | ADC batt  | RF switch |
+| LilyGo_TBeam_1W          | default | 22 dBm cfg\* | custom 2S | PA/FEM    |
+| LilyGo_TDeck             | default | 22 dBm cfg   | ADC batt  |           |
+| LilyGo_Tlora_C6          | default | 22 dBm cfg   | none      | RF switch |
+| LilyGo_TLora_V2_1_1_6    | default | 20 dBm cfg   | ADC batt  |           |
+| M5Stack_Unit_C6L         | default | 22 dBm cfg   | none      | RF switch |
+| Meshadventurer_sx1262    | default | 22 dBm cfg   | ADC batt  | RF switch |
+| Meshadventurer_sx1268    | default | 22 dBm cfg   | ADC batt  | RF switch |
+| Meshimi                  | default | 22 dBm cfg   | none      | ext ant   |
+| nibble_screen_connect    | default | 22 dBm cfg   | none      | NeoPixel  |
+| RAK_3112                 | 80 MHz  | 22 dBm cfg   | ADC batt  |           |
+| Station_G2               | default | 7 dBm cfg\*  | fixed/ext | PA/FEM    |
+| Station_G2_logging       | default | 7 dBm cfg\*  | fixed/ext | PA/FEM    |
+| T_Beam_S3_Supreme_SX1262 | default | 22 dBm cfg   | PMU       | BME280    |
+| Tbeam_SX1262             | default | 22 dBm cfg   | PMU       |           |
+| Tbeam_SX1276             | default | 20 dBm cfg   | PMU       |           |
+| Tenstar_C3_sx1262        | 80 MHz  | 22 dBm cfg   | ADC batt  |           |
+| Tenstar_C3_sx1268        | 80 MHz  | 22 dBm cfg   | ADC batt  |           |
+| ThinkNode_M2             | default | 22 dBm cfg   | ADC batt  |           |
+| ThinkNode_M5             | default | 22 dBm cfg   | ADC batt  |           |
+| WHY2025_badge            | default | 22 dBm cfg   | none      |           |
+| Xiao_C3                  | 80 MHz  | 22 dBm cfg   | ADC batt  |           |
+| Xiao_C6                  | default | 22 dBm cfg   | none      | RF switch |
+| Xiao_S3_WIO              | default | 22 dBm cfg   | none      | RF switch |
+
+\* These targets use a PA or RF front-end, so effective output can be much higher than the configured `LORA_TX_POWER`.
+
 ## `repeater_mqtt` Boards
 
 This table includes all repeater MQTT targets currently defined in `variants/eastmesh_mqtt/platformio.ini`.
 
-| Target                   | MCU     | RAM    | PSRAM | Flash | LoRa   | Display         | GPS | Notes                                   |
-| ------------------------ | ------- | ------ | ----- | ----- | ------ | --------------- | --- | --------------------------------------- |
-| Ebyte_EoRa-S3            | ESP32S3 | 512 KB | 2 MB  | 4MB   | SX1262 | OLED (SSD1306)  | No  | more memory headroom                    |
-| Generic_E22_sx1262       | ESP32   | 520 KB | No    | 4 MB  | SX1262 | None            | No  | headless                                |
-| Generic_E22_sx1268       | ESP32   | 520 KB | No    | 4 MB  | SX1268 | None            | No  | headless                                |
-| Heltec_ct62              | ESP32C3 | 400 KB | No    | 4 MB  | SX1262 | None            | No  | headless                                |
-| Heltec_E213              | ESP32S3 | 512 KB | 8 MB  | 16MB  | SX1262 | E-paper (2.13") | No  | low-power display, more memory headroom |
-| Heltec_E290              | ESP32S3 | 512 KB | 8 MB  | 16MB  | SX1262 | E-paper (2.9")  | No  | low-power display, more memory headroom |
-| Heltec_T190              | ESP32S3 | 512 KB | 8 MB  | 16MB  | SX1262 | TFT (ST7789)    | No  | richer UI, more memory headroom         |
-| heltec_tracker_v2        | ESP32S3 | 512 KB | No    | 8MB   | SX1262 | TFT (ST7735)    | Yes | richer UI, GPS                          |
-| Heltec_v2                | ESP32   | 520 KB | No    | 8 MB  | SX1276 | OLED (SSD1306)  | No  |                                         |
-| Heltec_v3                | ESP32S3 | 512 KB | No    | 8 MB  | SX1262 | OLED (SSD1306)  | Yes | GPS                                     |
-| heltec_v4                | ESP32S3 | 512 KB | 2 MB  | 16MB  | SX1262 | OLED (SSD1306)  | Yes | GPS, more memory headroom               |
-| heltec_v4_tft            | ESP32S3 | 512 KB | 2 MB  | 16MB  | SX1262 | TFT (ST7789)    | Yes | richer UI, GPS, more memory headroom    |
-| Heltec_Wireless_Paper    | ESP32S3 | 512 KB | No    | 8 MB  | SX1262 | E-paper (2.13") | No  | low-power display                       |
-| Heltec_Wireless_Tracker  | ESP32S3 | 512 KB | No    | 8 MB  | SX1262 | TFT (ST7735)    | Yes | richer UI, GPS                          |
-| Heltec_WSL3              | ESP32S3 | 512 KB | No    | 8 MB  | SX1262 | None            | Yes | headless, GPS                           |
-| LilyGo_T3S3_sx1262       | ESP32S3 | 512 KB | 2 MB  | 4MB   | SX1262 | OLED (SSD1306)  | No  | more memory headroom                    |
-| LilyGo_T3S3_sx1276       | ESP32S3 | 512 KB | 2 MB  | 4MB   | SX1276 | OLED (SSD1306)  | No  | more memory headroom                    |
-| LilyGo_TBeam_1W          | ESP32S3 | 512 KB | 8 MB  | 16MB  | SX1262 | OLED (SH1106)   | Yes | GPS, more memory headroom               |
-| LilyGo_TDeck             | ESP32S3 | 512 KB | No    | 16MB  | SX1262 | TFT (ST7789)    | Yes | richer UI, GPS                          |
-| LilyGo_Tlora_C6          | ESP32C6 | 512 KB | No    | 4 MB  | SX1262 | None            | No  | headless                                |
-| LilyGo_TLora_V2_1_1_6    | ESP32   | 520 KB | No    | 4 MB  | SX1276 | OLED (SSD1306)  | Yes | GPS                                     |
-| M5Stack_Unit_C6L         | ESP32C6 | 512 KB | No    | 4 MB  | SX1262 | None            | Yes | headless, GPS                           |
-| Meshadventurer_sx1262    | ESP32   | 520 KB | No    | 4 MB  | SX1262 | OLED (SSD1306)  | Yes | GPS                                     |
-| Meshadventurer_sx1268    | ESP32   | 520 KB | No    | 4 MB  | SX1268 | OLED (SSD1306)  | Yes | GPS                                     |
-| Meshimi                  | ESP32C6 | 512 KB | No    | 4 MB  | SX1262 | None            | No  | headless                                |
-| nibble_screen_connect    | ESP32S3 | 512 KB | No    | 4MB   | SX1262 | OLED (SSD1306)  | No  |                                         |
-| RAK_3112                 | ESP32S3 | 512 KB | No    | 8 MB  | SX1262 | None            | Yes | headless, GPS                           |
-| Station_G2               | ESP32S3 | 512 KB | 8 MB  | 16MB  | SX1262 | OLED (SH1106)   | Yes | GPS, more memory headroom               |
-| Station_G2_logging       | ESP32S3 | 512 KB | 8 MB  | 16MB  | SX1262 | OLED (SH1106)   | Yes | GPS, more memory headroom               |
-| T_Beam_S3_Supreme_SX1262 | ESP32S3 | 512 KB | 8 MB  | 8MB   | SX1262 | OLED (SH1106)   | Yes | GPS, more memory headroom               |
-| Tbeam_SX1262             | ESP32   | 520 KB | No    | 4 MB  | SX1262 | OLED (SSD1306)  | Yes | GPS                                     |
-| Tbeam_SX1276             | ESP32   | 520 KB | No    | 4 MB  | SX1276 | OLED (SSD1306)  | Yes | GPS                                     |
-| Tenstar_C3_sx1262        | ESP32C3 | 400 KB | No    | 4 MB  | SX1262 | None            | No  | headless                                |
-| Tenstar_C3_sx1268        | ESP32C3 | 400 KB | No    | 4 MB  | SX1268 | None            | No  | headless                                |
-| ThinkNode_M2             | ESP32S3 | 512 KB | No    | 4MB   | SX1262 | OLED (SH1106)   | No  |                                         |
-| ThinkNode_M5             | ESP32S3 | 512 KB | No    | 4MB   | SX1262 | E-paper (GxEPD) | Yes | low-power display, GPS                  |
-| WHY2025_badge            | ESP32C6 | 512 KB | No    | 4 MB  | SX1262 | None            | No  | headless                                |
-| Xiao_C3                  | ESP32C3 | 400 KB | No    | 4 MB  | SX1262 | None            | Yes | headless, GPS, web panel off            |
-| Xiao_C6                  | ESP32C6 | 512 KB | No    | 4 MB  | SX1262 | None            | No  | headless                                |
-| Xiao_S3_WIO              | ESP32S3 | 512 KB | No    | 8 MB  | SX1262 | None            | Yes | headless, GPS                           |
+| Target                   | MCU     | RAM    | PSRAM | Flash | LoRa   | Display         | GPS |
+| ------------------------ | ------- | ------ | ----- | ----- | ------ | --------------- | --- |
+| Ebyte_EoRa-S3            | ESP32S3 | 512 KB | 2 MB  | 4 MB  | SX1262 | OLED (SSD1306)  |     |
+| Generic_E22_sx1262       | ESP32   | 520 KB | No    | 4 MB  | SX1262 | None            |     |
+| Generic_E22_sx1268       | ESP32   | 520 KB | No    | 4 MB  | SX1268 | None            |     |
+| Heltec_ct62              | ESP32C3 | 400 KB | No    | 4 MB  | SX1262 | None            |     |
+| Heltec_E213              | ESP32S3 | 512 KB | 8 MB  | 16 MB | SX1262 | E-paper (2.13") |     |
+| Heltec_E290              | ESP32S3 | 512 KB | 8 MB  | 16 MB | SX1262 | E-paper (2.9")  |     |
+| Heltec_T190              | ESP32S3 | 512 KB | 8 MB  | 16 MB | SX1262 | TFT (ST7789)    |     |
+| heltec_tracker_v2        | ESP32S3 | 512 KB | No    | 8 MB  | SX1262 | TFT (ST7735)    | ✅  |
+| Heltec_v2                | ESP32   | 520 KB | No    | 8 MB  | SX1276 | OLED (SSD1306)  |     |
+| Heltec_v3                | ESP32S3 | 512 KB | No    | 8 MB  | SX1262 | OLED (SSD1306)  | ✅  |
+| heltec_v4                | ESP32S3 | 512 KB | 2 MB  | 16 MB | SX1262 | OLED (SSD1306)  | ✅  |
+| heltec_v4_tft            | ESP32S3 | 512 KB | 2 MB  | 16 MB | SX1262 | TFT (ST7789)    | ✅  |
+| Heltec_Wireless_Paper    | ESP32S3 | 512 KB | No    | 8 MB  | SX1262 | E-paper (2.13") |     |
+| Heltec_Wireless_Tracker  | ESP32S3 | 512 KB | No    | 8 MB  | SX1262 | TFT (ST7735)    | ✅  |
+| Heltec_WSL3              | ESP32S3 | 512 KB | No    | 8 MB  | SX1262 | None            | ✅  |
+| LilyGo_T3S3_sx1262       | ESP32S3 | 512 KB | 2 MB  | 4 MB  | SX1262 | OLED (SSD1306)  |     |
+| LilyGo_T3S3_sx1276       | ESP32S3 | 512 KB | 2 MB  | 4 MB  | SX1276 | OLED (SSD1306)  |     |
+| LilyGo_TBeam_1W          | ESP32S3 | 512 KB | 8 MB  | 16 MB | SX1262 | OLED (SH1106)   | ✅  |
+| LilyGo_TDeck             | ESP32S3 | 512 KB | No    | 16 MB | SX1262 | TFT (ST7789)    | ✅  |
+| LilyGo_Tlora_C6          | ESP32C6 | 512 KB | No    | 4 MB  | SX1262 | None            |     |
+| LilyGo_TLora_V2_1_1_6    | ESP32   | 520 KB | No    | 4 MB  | SX1276 | OLED (SSD1306)  | ✅  |
+| M5Stack_Unit_C6L         | ESP32C6 | 512 KB | No    | 4 MB  | SX1262 | None            | ✅  |
+| Meshadventurer_sx1262    | ESP32   | 520 KB | No    | 4 MB  | SX1262 | OLED (SSD1306)  | ✅  |
+| Meshadventurer_sx1268    | ESP32   | 520 KB | No    | 4 MB  | SX1268 | OLED (SSD1306)  | ✅  |
+| Meshimi                  | ESP32C6 | 512 KB | No    | 4 MB  | SX1262 | None            |     |
+| nibble_screen_connect    | ESP32S3 | 512 KB | No    | 4 MB  | SX1262 | OLED (SSD1306)  |     |
+| RAK_3112                 | ESP32S3 | 512 KB | No    | 8 MB  | SX1262 | None            | ✅  |
+| Station_G2               | ESP32S3 | 512 KB | 8 MB  | 16 MB | SX1262 | OLED (SH1106)   | ✅  |
+| Station_G2_logging       | ESP32S3 | 512 KB | 8 MB  | 16 MB | SX1262 | OLED (SH1106)   | ✅  |
+| T_Beam_S3_Supreme_SX1262 | ESP32S3 | 512 KB | 8 MB  | 8 MB  | SX1262 | OLED (SH1106)   | ✅  |
+| Tbeam_SX1262             | ESP32   | 520 KB | No    | 4 MB  | SX1262 | OLED (SSD1306)  | ✅  |
+| Tbeam_SX1276             | ESP32   | 520 KB | No    | 4 MB  | SX1276 | OLED (SSD1306)  | ✅  |
+| Tenstar_C3_sx1262        | ESP32C3 | 400 KB | No    | 4 MB  | SX1262 | None            |     |
+| Tenstar_C3_sx1268        | ESP32C3 | 400 KB | No    | 4 MB  | SX1268 | None            |     |
+| ThinkNode_M2             | ESP32S3 | 512 KB | No    | 4 MB  | SX1262 | OLED (SH1106)   |     |
+| ThinkNode_M5             | ESP32S3 | 512 KB | No    | 4 MB  | SX1262 | E-paper (GxEPD) | ✅  |
+| WHY2025_badge            | ESP32C6 | 512 KB | No    | 4 MB  | SX1262 | None            |     |
+| Xiao_C3                  | ESP32C3 | 400 KB | No    | 4 MB  | SX1262 | None            | ✅  |
+| Xiao_C6                  | ESP32C6 | 512 KB | No    | 4 MB  | SX1262 | None            |     |
+| Xiao_S3_WIO              | ESP32S3 | 512 KB | No    | 8 MB  | SX1262 | None            | ✅  |
 
 Note: all current `repeater_mqtt` boards support the local web panel except `Xiao_C3`, where it is disabled to preserve limited board resources.
 
@@ -81,38 +134,38 @@ Note: all current `repeater_mqtt` boards support the local web panel except `Xia
 
 These are the Wi-Fi companion targets that have a display configured for local status, setup help, or occasional direct interaction.
 
-| Target                   | MCU     | RAM    | PSRAM | Flash | LoRa   | Display         | GPS | Notes                                |
-| ------------------------ | ------- | ------ | ----- | ----- | ------ | --------------- | --- | ------------------------------------ |
-| Heltec_v2                | ESP32   | 520 KB | No    | 8 MB  | SX1276 | OLED (SSD1306)  | No  |                                      |
-| Heltec_v3                | ESP32S3 | 512 KB | No    | 8 MB  | SX1262 | OLED (SSD1306)  | Yes | GPS                                  |
-| heltec_tracker_v2        | ESP32S3 | 512 KB | No    | 8MB   | SX1262 | TFT (ST7735)    | Yes | richer UI, GPS                       |
-| heltec_v4                | ESP32S3 | 512 KB | 2 MB  | 16MB  | SX1262 | OLED (SSD1306)  | Yes | GPS, more memory headroom            |
-| heltec_v4_tft            | ESP32S3 | 512 KB | 2 MB  | 16MB  | SX1262 | TFT (ST7789)    | Yes | richer UI, GPS, more memory headroom |
-| LilyGo_TBeam_1W          | ESP32S3 | 512 KB | 8 MB  | 16MB  | SX1262 | OLED (SH1106)   | Yes | GPS, more memory headroom            |
-| LilyGo_TLora_V2_1_1_6    | ESP32   | 520 KB | No    | 4 MB  | SX1276 | OLED (SSD1306)  | Yes | GPS                                  |
-| nibble_screen_connect    | ESP32S3 | 512 KB | No    | 4MB   | SX1262 | OLED (SSD1306)  | No  |                                      |
-| Station_G2               | ESP32S3 | 512 KB | 8 MB  | 16MB  | SX1262 | OLED (SH1106)   | Yes | GPS, more memory headroom            |
-| T_Beam_S3_Supreme_SX1262 | ESP32S3 | 512 KB | 8 MB  | 8MB   | SX1262 | OLED (SH1106)   | Yes | GPS, more memory headroom            |
-| ThinkNode_M2             | ESP32S3 | 512 KB | No    | 4MB   | SX1262 | OLED (SH1106)   | No  |                                      |
-| ThinkNode_M5             | ESP32S3 | 512 KB | No    | 4MB   | SX1262 | E-paper (GxEPD) | Yes | low-power display, GPS               |
+| Target                   | MCU     | RAM    | PSRAM | Flash | LoRa   | Display         | GPS |
+| ------------------------ | ------- | ------ | ----- | ----- | ------ | --------------- | --- |
+| Heltec_v2                | ESP32   | 520 KB | No    | 8 MB  | SX1276 | OLED (SSD1306)  |     |
+| Heltec_v3                | ESP32S3 | 512 KB | No    | 8 MB  | SX1262 | OLED (SSD1306)  | ✅  |
+| heltec_tracker_v2        | ESP32S3 | 512 KB | No    | 8MB   | SX1262 | TFT (ST7735)    | ✅  |
+| heltec_v4                | ESP32S3 | 512 KB | 2 MB  | 16MB  | SX1262 | OLED (SSD1306)  | ✅  |
+| heltec_v4_tft            | ESP32S3 | 512 KB | 2 MB  | 16MB  | SX1262 | TFT (ST7789)    | ✅  |
+| LilyGo_TBeam_1W          | ESP32S3 | 512 KB | 8 MB  | 16MB  | SX1262 | OLED (SH1106)   | ✅  |
+| LilyGo_TLora_V2_1_1_6    | ESP32   | 520 KB | No    | 4 MB  | SX1276 | OLED (SSD1306)  | ✅  |
+| nibble_screen_connect    | ESP32S3 | 512 KB | No    | 4MB   | SX1262 | OLED (SSD1306)  |     |
+| Station_G2               | ESP32S3 | 512 KB | 8 MB  | 16MB  | SX1262 | OLED (SH1106)   | ✅  |
+| T_Beam_S3_Supreme_SX1262 | ESP32S3 | 512 KB | 8 MB  | 8MB   | SX1262 | OLED (SH1106)   | ✅  |
+| ThinkNode_M2             | ESP32S3 | 512 KB | No    | 4MB   | SX1262 | OLED (SH1106)   |     |
+| ThinkNode_M5             | ESP32S3 | 512 KB | No    | 4MB   | SX1262 | E-paper (GxEPD) | ✅  |
 
 ## `companion_radio_wifi` Headless Boards
 
 These are the Wi-Fi companion targets that rely on the companion app as the primary interface. For many users, this is the best everyday option.
 
-| Target      | MCU     | RAM    | PSRAM | Flash | LoRa   | GPS | Notes                                   |
-| ----------- | ------- | ------ | ----- | ----- | ------ | --- | --------------------------------------- |
-| Heltec_WSL3 | ESP32S3 | 512 KB | No    | 8 MB  | SX1262 | Yes | headless, GPS                           |
-| RAK_3112    | ESP32S3 | 512 KB | No    | 8 MB  | SX1262 | Yes | headless, GPS                           |
-| Xiao_C3     | ESP32C3 | 400 KB | No    | 4 MB  | SX1262 | Yes | smallest headless option, web panel off |
-| Xiao_S3_WIO | ESP32S3 | 512 KB | No    | 8 MB  | SX1262 | Yes | headless, GPS                           |
+| Target      | MCU     | RAM    | PSRAM | Flash | LoRa   | GPS |
+| ----------- | ------- | ------ | ----- | ----- | ------ | --- |
+| Heltec_WSL3 | ESP32S3 | 512 KB | No    | 8 MB  | SX1262 | ✅  |
+| RAK_3112    | ESP32S3 | 512 KB | No    | 8 MB  | SX1262 | ✅  |
+| Xiao_C3     | ESP32C3 | 400 KB | No    | 4 MB  | SX1262 | ✅  |
+| Xiao_S3_WIO | ESP32S3 | 512 KB | No    | 8 MB  | SX1262 | ✅  |
 
 ## Practical Picks
 
-- Best all-round MQTT repeater with screen and memory headroom: `heltec_v4_repeater_mqtt`, `heltec_v4_tft_repeater_mqtt`, `T_Beam_S3_Supreme_SX1262_repeater_mqtt`, `Station_G2_repeater_mqtt`.
+- Best all-round MQTT repeater with screen and overall headroom: `heltec_v4_repeater_mqtt`, `heltec_v4_tft_repeater_mqtt`, `Station_G2_repeater_mqtt`, `LilyGo_TBeam_1W_repeater_mqtt`.
 - Best MQTT repeater if you want a simple headless install: `RAK_3112_repeater_mqtt`, `Tenstar_C3_sx1262_repeater_mqtt`, `Heltec_ct62_repeater_mqtt`, `Generic_E22_sx1262_repeater_mqtt`.
 - Best low-power display MQTT builds: `Heltec_E213_repeater_mqtt`, `Heltec_E290_repeater_mqtt`, `Heltec_Wireless_Paper_repeater_mqtt`, `ThinkNode_M5_Repeater_mqtt`.
 - Best companion choices if you want the richest local UI: `heltec_v4_tft_companion_radio_wifi` and `heltec_tracker_v2_companion_radio_wifi`.
-- Best companion choices if you want maximum memory headroom: `T_Beam_S3_Supreme_SX1262_companion_radio_wifi`, `heltec_v4_companion_radio_wifi`, `heltec_v4_tft_companion_radio_wifi`, `Station_G2_companion_radio_wifi`.
+- Best companion choices if you want maximum memory headroom: `T_Beam_S3_Supreme_SX1262_companion_radio_wifi`, `Station_G2_companion_radio_wifi`, `LilyGo_TBeam_1W_companion_radio_wifi`.
 - Best companion choices if you are happy with an app-first, mostly headless setup: `Xiao_C3_companion_radio_wifi`, `RAK_3112_companion_radio_wifi`, `Xiao_S3_WIO_companion_radio_wifi`, `Station_G2_companion_radio_wifi`.
 - Best companion choices if you prefer OLED over TFT: `T_Beam_S3_Supreme_SX1262_companion_radio_wifi`, `heltec_v4_companion_radio_wifi`, `LilyGo_TBeam_1W_companion_radio_wifi`.