shade/MeshCoreTel-firmware
1
0
Fork 0
Code Probleme Pull-Requests Actions 3 Pakete Projekte Releases Wiki Aktivität

chore: remove ESP32-C3 target support and CI coverage

Quellcode durchsuchen
Dieser Commit ist enthalten in:
Jared Dohrman
2026-04-15 18:24:36 +10:00
Ursprung 3919a6e36f
Commit a0c8f80504
7 geänderte Dateien mit 5 neuen und 135 gelöschten Zeilen
Patch-Datei herunterladen Vergleichs-Datei herunterladen Alle Dateien ausklappen Alle Dateien einklappen
.github/workflows/pr-build-check.yml
-3
Datei anzeigen
@@ -25,9 +25,6 @@ jobs:
- heltec_v4_repeater_mqtt
- T_Beam_S3_Supreme_SX1262_companion_radio_wifi
- T_Beam_S3_Supreme_SX1262_repeater_mqtt
# ESP32-C3
- Xiao_C3_companion_radio_wifi
- Xiao_C3_repeater_mqtt
# ESP32-C6
- LilyGo_Tlora_C6_repeater_mqtt
- Xiao_C6_repeater_mqtt
.github/workflows/push-build-check.yml
-2
Datei anzeigen
@@ -23,8 +23,6 @@ jobs:
# ESP32-S3 / core EastMesh targets
- heltec_v4_repeater_mqtt
- T_Beam_S3_Supreme_SX1262_repeater_mqtt
# ESP32-C3
- Xiao_C3_repeater_mqtt
# ESP32-C6
- LilyGo_Tlora_C6_repeater_mqtt
- Xiao_C6_repeater_mqtt
README.md
-2
Datei anzeigen
@@ -165,8 +165,6 @@ Features include:
Recommended use is initial setup and occasional troubleshooting. On MQTT repeater deployments, disable the panel again when finished if you want maximum MQTT heap headroom.
Some constrained targets disable the panel to stay within flash limits. For example, `Xiao_C3_repeater_mqtt` builds with `WITH_WEB_PANEL=0`.
### Companion WiFi Additions
`*_companion_radio_wifi` targets now support persisted WiFi rescue commands:
docs/boards.md
+4 -15
Datei anzeigen
@@ -23,8 +23,8 @@ The tables below are built from the repo's PlatformIO board metadata and variant
- Pick an `ESP32-S3` board with `16MB` flash and PSRAM if you want strong overall headroom for MQTT plus UI: `heltec_v4_tft`, `heltec_v4`, `Station_G2`, `LilyGo_TBeam_1W`.
- Pick a TFT board if this will be used as a human-facing companion or field node: `heltec_v4_tft`, `heltec_tracker_v2`, `LilyGo_TDeck`, `Heltec_T190`.
- Pick e-paper if you want a status screen with lower idle draw and less frequent refresh: `Heltec_E213`, `Heltec_E290`, `Heltec_Wireless_Paper`, `ThinkNode_M5`.
- Pick a headless board if this is mainly a fixed MQTT gateway and screen space is not useful: `Xiao_C3`, `RAK_3112`, `Tenstar_C3`, `Heltec_ct62`, `Generic_E22`.
- Pick a headless Wi-Fi companion if the phone app will be the primary UI anyway: `Xiao_C3_companion_radio_wifi`, `RAK_3112_companion_radio_wifi`, `Xiao_S3_WIO_companion_radio_wifi`, `Station_G2_companion_radio_wifi`.
- Pick a headless board if this is mainly a fixed MQTT gateway and screen space is not useful: `RAK_3112`, `Generic_E22`, `Meshimi`, `Xiao_C6`.
- Pick a headless Wi-Fi companion if the phone app will be the primary UI anyway: `RAK_3112_companion_radio_wifi`, `Xiao_S3_WIO_companion_radio_wifi`, `Station_G2_companion_radio_wifi`.
- Pick a GPS-capable board if location-aware/mobile use matters: the T-Beam family, `heltec_tracker_v2`, `Heltec_v3`, `heltec_v4`, `Station_G2`, `ThinkNode_M5`.
- If you want the most conservative, older radio family choices, the `SX1276` boards are `LilyGo_TLora_V2_1_1_6`, `Tbeam_SX1276`, and `Heltec_v2`.
@@ -42,7 +42,6 @@ If you are deciding between otherwise similar boards, these target-level setting
| Ebyte_EoRa-S3 | default | 22 dBm cfg | ADC batt | |
| Generic_E22_sx1262 | default | 22 dBm cfg | ADC batt | RF switch |
| Generic_E22_sx1268 | default | 22 dBm cfg | ADC batt | RF switch |
| Heltec_ct62 | 80 MHz | 22 dBm cfg | ADC batt | |
| Heltec_E213 | default | 22 dBm cfg | ADC batt | |
| Heltec_E290 | default | 22 dBm cfg | ADC batt | |
| Heltec_T190 | default | 22 dBm cfg | ADC batt | |
@@ -71,12 +70,9 @@ If you are deciding between otherwise similar boards, these target-level setting
| T_Beam_S3_Supreme_SX1262 | default | 22 dBm cfg | PMU | BME280 |
| Tbeam_SX1262 | default | 22 dBm cfg | PMU | |
| Tbeam_SX1276 | default | 20 dBm cfg | PMU | |
| Tenstar_C3_sx1262 | 80 MHz | 22 dBm cfg | ADC batt | |
| Tenstar_C3_sx1268 | 80 MHz | 22 dBm cfg | ADC batt | |
| ThinkNode_M2 | default | 22 dBm cfg | ADC batt | |
| ThinkNode_M5 | default | 22 dBm cfg | ADC batt | |
| WHY2025_badge | default | 22 dBm cfg | none | |
| Xiao_C3 | 80 MHz | 22 dBm cfg | ADC batt | |
| Xiao_C6 | default | 22 dBm cfg | none | RF switch |
| Xiao_S3_WIO | default | 22 dBm cfg | none | RF switch |
@@ -91,7 +87,6 @@ This table includes all repeater MQTT targets currently defined in `variants/eas
| Ebyte_EoRa-S3 | ESP32S3 | 512 KB | 2 MB | 4 MB | SX1262 | OLED (SSD1306) | | |
| Generic_E22_sx1262 | ESP32 | 520 KB | No | 4 MB | SX1262 | None | | |
| Generic_E22_sx1268 | ESP32 | 520 KB | No | 4 MB | SX1268 | None | | |
| Heltec_ct62 | ESP32C3 | 400 KB | No | 4 MB | SX1262 | None | | |
| Heltec_E213 | ESP32S3 | 512 KB | 8 MB | 16 MB | SX1262 | E-paper (2.13") | | |
| Heltec_E290 | ESP32S3 | 512 KB | 8 MB | 16 MB | SX1262 | E-paper (2.9") | | |
| Heltec_T190 | ESP32S3 | 512 KB | 8 MB | 16 MB | SX1262 | TFT (ST7789) | | |
@@ -120,17 +115,12 @@ This table includes all repeater MQTT targets currently defined in `variants/eas
| T_Beam_S3_Supreme_SX1262 | ESP32S3 | 512 KB | 8 MB | 8 MB | SX1262 | OLED (SH1106) | ✅ | ✅ |
| Tbeam_SX1262 | ESP32 | 520 KB | No | 4 MB | SX1262 | OLED (SSD1306) | ✅ | |
| Tbeam_SX1276 | ESP32 | 520 KB | No | 4 MB | SX1276 | OLED (SSD1306) | ✅ | |
| Tenstar_C3_sx1262 | ESP32C3 | 400 KB | No | 4 MB | SX1262 | None | | |
| Tenstar_C3_sx1268 | ESP32C3 | 400 KB | No | 4 MB | SX1268 | None | | |
| ThinkNode_M2 | ESP32S3 | 512 KB | No | 4 MB | SX1262 | OLED (SH1106) | | |
| ThinkNode_M5 | ESP32S3 | 512 KB | No | 4 MB | SX1262 | E-paper (GxEPD) | ✅ | |
| WHY2025_badge | ESP32C6 | 512 KB | No | 4 MB | SX1262 | None | | |
| Xiao_C3 | ESP32C3 | 400 KB | No | 4 MB | SX1262 | None | ✅ | |
| Xiao_C6 | ESP32C6 | 512 KB | No | 4 MB | SX1262 | None | | |
| Xiao_S3_WIO | ESP32S3 | 512 KB | No | 8 MB | SX1262 | None | ✅ | |
Note: all current `repeater_mqtt` boards support the local web panel except `Xiao_C3`, where it is disabled to preserve limited board resources.
SD notes:
- `✅` means the board is currently known to work with the SD-backed archive path in EastMesh.
@@ -164,15 +154,14 @@ These are the Wi-Fi companion targets that rely on the companion app as the prim
| ----------- | ------- | ------ | ----- | ----- | ------ | --- |
| Heltec_WSL3 | ESP32S3 | 512 KB | No | 8 MB | SX1262 | ✅ |
| RAK_3112 | ESP32S3 | 512 KB | No | 8 MB | SX1262 | ✅ |
| Xiao_C3 | ESP32C3 | 400 KB | No | 4 MB | SX1262 | ✅ |
| Xiao_S3_WIO | ESP32S3 | 512 KB | No | 8 MB | SX1262 | ✅ |
## Practical Picks
- Best all-round MQTT repeater with screen and overall headroom: `heltec_v4_repeater_mqtt`, `heltec_v4_tft_repeater_mqtt`, `Station_G2_repeater_mqtt`, `LilyGo_TBeam_1W_repeater_mqtt`.
- Best MQTT repeater if you want a simple headless install: `RAK_3112_repeater_mqtt`, `Tenstar_C3_sx1262_repeater_mqtt`, `Heltec_ct62_repeater_mqtt`, `Generic_E22_sx1262_repeater_mqtt`.
- Best MQTT repeater if you want a simple headless install: `RAK_3112_repeater_mqtt`, `Generic_E22_sx1262_repeater_mqtt`, `Meshimi_repeater_mqtt`, `Xiao_C6_repeater_mqtt`.
- Best low-power display MQTT builds: `Heltec_E213_repeater_mqtt`, `Heltec_E290_repeater_mqtt`, `Heltec_Wireless_Paper_repeater_mqtt`, `ThinkNode_M5_Repeater_mqtt`.
- Best companion choices if you want the richest local UI: `heltec_v4_tft_companion_radio_wifi` and `heltec_tracker_v2_companion_radio_wifi`.
- Best companion choices if you want maximum memory headroom: `T_Beam_S3_Supreme_SX1262_companion_radio_wifi`, `Station_G2_companion_radio_wifi`, `LilyGo_TBeam_1W_companion_radio_wifi`.
- Best companion choices if you are happy with an app-first, mostly headless setup: `Xiao_C3_companion_radio_wifi`, `RAK_3112_companion_radio_wifi`, `Xiao_S3_WIO_companion_radio_wifi`, `Station_G2_companion_radio_wifi`.
- Best companion choices if you are happy with an app-first, mostly headless setup: `RAK_3112_companion_radio_wifi`, `Xiao_S3_WIO_companion_radio_wifi`, `Station_G2_companion_radio_wifi`.
- Best companion choices if you prefer OLED over TFT: `T_Beam_S3_Supreme_SX1262_companion_radio_wifi`, `heltec_v4_companion_radio_wifi`, `LilyGo_TBeam_1W_companion_radio_wifi`.
docs/local-builds.md
-9
Datei anzeigen
@@ -67,7 +67,6 @@ These are the full PlatformIO env names used for local source builds and release
```text
Generic_E22_sx1262_repeater_mqtt
Generic_E22_sx1268_repeater_mqtt
Heltec_ct62_repeater_mqtt
Heltec_E213_repeater_mqtt
Heltec_E290_repeater_mqtt
Heltec_T190_repeater_mqtt
@@ -96,18 +95,11 @@ Station_G2_repeater_mqtt
T_Beam_S3_Supreme_SX1262_repeater_mqtt
Tbeam_SX1262_repeater_mqtt
Tbeam_SX1276_repeater_mqtt
Tenstar_C3_sx1262_repeater_mqtt
Tenstar_C3_sx1268_repeater_mqtt
WHY2025_badge_repeater_mqtt
Xiao_C3_repeater_mqtt
Xiao_C6_repeater_mqtt
Xiao_S3_WIO_repeater_mqtt
```
Notes:
- `Xiao_C3_repeater_mqtt` disables the web panel to stay within flash limits
## Supported `companion_radio_wifi` Boards
These are the full PlatformIO env names used for local source builds and release artifact naming.
@@ -127,7 +119,6 @@ Station_G2_companion_radio_wifi
T_Beam_S3_Supreme_SX1262_companion_radio_wifi
ThinkNode_M2_companion_radio_wifi
ThinkNode_M5_companion_radio_wifi
Xiao_C3_companion_radio_wifi
Xiao_S3_WIO_companion_radio_wifi
```
variants/eastmesh_mqtt/platformio.ini
-102
Datei anzeigen
@@ -75,31 +75,6 @@ lib_deps =
${Generic_E22.lib_deps}
${esp32_ota.lib_deps}
[env:Heltec_ct62_repeater_mqtt]
extends = Heltec_ct62
build_flags =
${Heltec_ct62.build_flags}
;-D ARDUINO_USB_MODE=1
;-D ARDUINO_USB_CDC_ON_BOOT=1
-D ADVERT_NAME='"HT-CT62 Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_MQTT_UPLINK=1
-D MQTT_DEBUG=1
-D WIFI_SSID='"myssid"'
-D WIFI_PWD='"mypwd"'
-D MQTT_DEFAULT_IATA='"MEL"'
-D CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=1
build_src_filter = ${Heltec_ct62.build_src_filter}
+<../examples/simple_repeater>
+<helpers/mqtt/*.cpp>
+<helpers/web/*.cpp>
lib_deps =
${Heltec_ct62.lib_deps}
${esp32_ota.lib_deps}
[env:Heltec_E213_repeater_mqtt]
extends = Heltec_E213_base
build_flags =
@@ -791,59 +766,6 @@ lib_deps =
${LilyGo_TBeam_SX1276.lib_deps}
${esp32_ota.lib_deps}
[env:Tenstar_C3_sx1262_repeater_mqtt]
extends = Tenstar_esp32_C3
build_src_filter = ${Tenstar_esp32_C3.build_src_filter}
+<../examples/simple_repeater/*.cpp>
+<helpers/mqtt/*.cpp>
+<helpers/web/*.cpp>
build_flags =
${Tenstar_esp32_C3.build_flags}
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D SX126X_RX_BOOSTED_GAIN=1
-D LORA_TX_POWER=22
-D ADVERT_NAME='"Tenstar C3 Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_MQTT_UPLINK=1
-D MQTT_DEBUG=1
-D WIFI_SSID='"myssid"'
-D WIFI_PWD='"mypwd"'
-D MQTT_DEFAULT_IATA='"MEL"'
-D CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=1
lib_deps =
${Tenstar_esp32_C3.lib_deps}
${esp32_ota.lib_deps}
[env:Tenstar_C3_sx1268_repeater_mqtt]
extends = Tenstar_esp32_C3
build_src_filter = ${Tenstar_esp32_C3.build_src_filter}
+<../examples/simple_repeater/*.cpp>
+<helpers/mqtt/*.cpp>
+<helpers/web/*.cpp>
build_flags =
${Tenstar_esp32_C3.build_flags}
-D RADIO_CLASS=CustomSX1268
-D WRAPPER_CLASS=CustomSX1268Wrapper
-D LORA_TX_POWER=22
-D ADVERT_NAME='"Tenstar C3 Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_MQTT_UPLINK=1
-D MQTT_DEBUG=1
-D WIFI_SSID='"myssid"'
-D WIFI_PWD='"mypwd"'
-D MQTT_DEFAULT_IATA='"MEL"'
-D CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=1
lib_deps =
${Tenstar_esp32_C3.lib_deps}
${esp32_ota.lib_deps}
[env:ThinkNode_M2_Repeater_mqtt]
extends = ThinkNode_M2
build_src_filter = ${ThinkNode_M2.build_src_filter}
@@ -912,30 +834,6 @@ build_flags =
lib_deps =
${WHY2025_badge.lib_deps}
[env:Xiao_C3_repeater_mqtt]
extends = Xiao_esp32_C3
build_src_filter = ${Xiao_esp32_C3.build_src_filter}
+<../examples/simple_repeater/*.cpp>
+<helpers/mqtt/*.cpp>
build_flags =
${Xiao_esp32_C3.build_flags}
-D ADVERT_NAME='"Xiao C3 Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_MQTT_UPLINK=1
-D WITH_WEB_PANEL=0
-D MQTT_DEBUG=1
-D WIFI_SSID='"myssid"'
-D WIFI_PWD='"mypwd"'
-D MQTT_DEFAULT_IATA='"MEL"'
-D CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=1
lib_deps =
${Xiao_esp32_C3.lib_deps}
${esp32_ota.lib_deps}
bakercp/CRC32 @ ^2.0.0
[env:Xiao_C6_repeater_mqtt]
extends = Xiao_C6
build_src_filter = ${Xiao_C6.build_src_filter}
variants/tenstar_c3/target.h
+1 -2
Datei anzeigen
@@ -3,7 +3,7 @@
#define RADIOLIB_STATIC_ONLY 1
#include <RadioLib.h>
#include <helpers/radiolib/RadioLibWrappers.h>
#include <helpers/XiaoC3Board.h>
#include <XiaoC3Board.h>
#include <helpers/radiolib/CustomSX1262Wrapper.h>
#include <helpers/radiolib/CustomSX1268Wrapper.h>
#include <helpers/AutoDiscoverRTCClock.h>
@@ -19,4 +19,3 @@ uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(int8_t dbm);
mesh::LocalIdentity radio_new_identity();