Bridge: enhance CLI configuration options

examples/simple_repeater/MyMesh.cpp

@@ -231,6 +231,12 @@ void MyMesh::logRxRaw(float snr, float rssi, const uint8_t raw[], int len) {
 }
 
 void MyMesh::logRx(mesh::Packet *pkt, int len, float score) {
+#ifdef WITH_BRIDGE
+  if (_prefs.bridge_pkt_src == 1) {
+    bridge.sendPacket(pkt);
+  }
+#endif
+
   if (_logging) {
     File f = openAppend(PACKET_LOG_FILE);
     if (f) {
@@ -252,8 +258,11 @@ void MyMesh::logRx(mesh::Packet *pkt, int len, float score) {
 
 void MyMesh::logTx(mesh::Packet *pkt, int len) {
 #ifdef WITH_BRIDGE
-  bridge.onPacketTransmitted(pkt);
+  if (_prefs.bridge_pkt_src == 0) {
+    bridge.sendPacket(pkt);
+  }
 #endif
+
   if (_logging) {
     File f = openAppend(PACKET_LOG_FILE);
     if (f) {
@@ -481,9 +490,10 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
     : mesh::Mesh(radio, ms, rng, rtc, *new StaticPoolPacketManager(32), tables),
       _cli(board, rtc, &_prefs, this), telemetry(MAX_PACKET_PAYLOAD - 4)
 #if defined(WITH_RS232_BRIDGE)
-      , bridge(WITH_RS232_BRIDGE, _mgr, &rtc)
-#elif defined(WITH_ESPNOW_BRIDGE)
-      , bridge(_mgr, &rtc)
+      , bridge(&_prefs, WITH_RS232_BRIDGE, _mgr, &rtc)
+#endif
+#if defined(WITH_ESPNOW_BRIDGE)
+      , bridge(&_prefs, _mgr, &rtc)
 #endif
 {
   next_local_advert = next_flood_advert = 0;
@@ -513,8 +523,14 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
   _prefs.flood_advert_interval = 12; // 12 hours
   _prefs.flood_max = 64;
   _prefs.interference_threshold = 0; // disabled
-  _prefs.bridge_enabled = 1;         // enabled
-  _prefs.bridge_channel = 0;         // auto
+
+  // bridge defaults
+  _prefs.bridge_enabled = 1;    // enabled
+  _prefs.bridge_delay   = 500;  // milliseconds
+  _prefs.bridge_pkt_src = 0;    // logTx
+  _prefs.bridge_baud = 115200;  // baud rate
+  _prefs.bridge_channel = 1;    // channel 1
+  StrHelper::strncpy(_prefs.bridge_secret, "LVSITANOS", sizeof(_prefs.bridge_secret));
 }
 
 void MyMesh::begin(FILESYSTEM *fs) {
@@ -525,9 +541,6 @@ void MyMesh::begin(FILESYSTEM *fs) {
 
   acl.load(_fs);
 
-#if defined(WITH_ESPNOW_BRIDGE)
-  bridge.setChannel(_prefs.bridge_channel);
-#endif
 #if defined(WITH_BRIDGE)
   if (_prefs.bridge_enabled) {
     bridge.begin();

examples/simple_repeater/MyMesh.h

@@ -165,23 +165,6 @@ public:
   void updateAdvertTimer() override;
   void updateFloodAdvertTimer() override;
 
-#if defined(WITH_BRIDGE)
-  void setBridgeState(bool enable) {
-    if (enable == bridge.getState()) return;
-    enable ? bridge.begin() : bridge.end();
-  }
-
-#if defined(WITH_ESPNOW_BRIDGE)
-  void updateBridgeChannel(int ch) override {
-    bridge.setChannel(ch);
-    if (bridge.getState()) {
-      bridge.end();
-      bridge.begin();
-    }
-  }
-#endif
-#endif
-
   void setLoggingOn(bool enable) override { _logging = enable; }
 
   void eraseLogFile() override {
@@ -199,4 +182,17 @@ public:
   void clearStats() override;
   void handleCommand(uint32_t sender_timestamp, char* command, char* reply);
   void loop();
+
+#if defined(WITH_BRIDGE)
+  void setBridgeState(bool enable) override {
+    if (enable == bridge.getState()) return;
+    enable ? bridge.begin() : bridge.end();
+  }
+
+  void restartBridge() override {
+    if (!bridge.getState()) return;
+    bridge.end();
+    bridge.begin();
+  }
+#endif
 };

src/helpers/AbstractBridge.h

@@ -35,7 +35,7 @@ public:
    *
    * @param packet The packet that was transmitted.
    */
-  virtual void onPacketTransmitted(mesh::Packet* packet) = 0;
+  virtual void sendPacket(mesh::Packet* packet) = 0;
 
   /**
    * @brief Processes a received packet from the bridge's medium.

src/helpers/CommonCLI.cpp

@@ -59,7 +59,11 @@ void CommonCLI::loadPrefsInt(FILESYSTEM* fs, const char* filename) {
     file.read((uint8_t *)&_prefs->flood_advert_interval, sizeof(_prefs->flood_advert_interval));   // 125
     file.read((uint8_t *)&_prefs->interference_threshold, sizeof(_prefs->interference_threshold)); // 126
     file.read((uint8_t *)&_prefs->bridge_enabled, sizeof(_prefs->bridge_enabled));                 // 127
-    file.read((uint8_t *)&_prefs->bridge_channel, sizeof(_prefs->bridge_channel));                 // 128
+    file.read((uint8_t *)&_prefs->bridge_delay, sizeof(_prefs->bridge_delay));                     // 128
+    file.read((uint8_t *)&_prefs->bridge_pkt_src, sizeof(_prefs->bridge_pkt_src));                 // 130
+    file.read((uint8_t *)&_prefs->bridge_baud, sizeof(_prefs->bridge_baud));                       // 131
+    file.read((uint8_t *)&_prefs->bridge_channel, sizeof(_prefs->bridge_channel));                 // 132
+    file.read((uint8_t *)&_prefs->bridge_secret, sizeof(_prefs->bridge_secret));                   // 133
 
     // sanitise bad pref values
     _prefs->rx_delay_base = constrain(_prefs->rx_delay_base, 0, 20.0f);
@@ -72,7 +76,12 @@ void CommonCLI::loadPrefsInt(FILESYSTEM* fs, const char* filename) {
     _prefs->cr = constrain(_prefs->cr, 5, 8);
     _prefs->tx_power_dbm = constrain(_prefs->tx_power_dbm, 1, 30);
     _prefs->multi_acks = constrain(_prefs->multi_acks, 0, 1);
+
+    // sanitise bad bridge pref values
     _prefs->bridge_enabled = constrain(_prefs->bridge_enabled, 0, 1);
+    _prefs->bridge_delay = constrain(_prefs->bridge_delay, 0, 10000);
+    _prefs->bridge_pkt_src = constrain(_prefs->bridge_pkt_src, 0, 1);
+    _prefs->bridge_baud = constrain(_prefs->bridge_baud, 9600, 115200);
     _prefs->bridge_channel = constrain(_prefs->bridge_channel, 0, 14);
 
     file.close();
@@ -119,7 +128,11 @@ void CommonCLI::savePrefs(FILESYSTEM* fs) {
     file.write((uint8_t *)&_prefs->flood_advert_interval, sizeof(_prefs->flood_advert_interval));   // 125
     file.write((uint8_t *)&_prefs->interference_threshold, sizeof(_prefs->interference_threshold)); // 126
     file.write((uint8_t *)&_prefs->bridge_enabled, sizeof(_prefs->bridge_enabled));                 // 127
-    file.write((uint8_t *)&_prefs->bridge_channel, sizeof(_prefs->bridge_channel));                 // 128
+    file.write((uint8_t *)&_prefs->bridge_delay, sizeof(_prefs->bridge_delay));                     // 128
+    file.write((uint8_t *)&_prefs->bridge_pkt_src, sizeof(_prefs->bridge_pkt_src));                 // 130
+    file.write((uint8_t *)&_prefs->bridge_baud, sizeof(_prefs->bridge_baud));                       // 131
+    file.write((uint8_t *)&_prefs->bridge_channel, sizeof(_prefs->bridge_channel));                 // 132
+    file.write((uint8_t *)&_prefs->bridge_secret, sizeof(_prefs->bridge_secret));                   // 133
 
     file.close();
   }
@@ -205,6 +218,9 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
     } else if (memcmp(command, "clear stats", 11) == 0) {
       _callbacks->clearStats();
       strcpy(reply, "(OK - stats reset)");
+    /*
+     * GET commands
+     */
     } else if (memcmp(command, "get ", 4) == 0) {
       const char* config = &command[4];
       if (memcmp(config, "af", 2) == 0) {
@@ -261,38 +277,29 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
 #ifdef WITH_BRIDGE
       } else if (memcmp(config, "bridge.enabled", 14) == 0) {
         sprintf(reply, "> %s", _prefs->bridge_enabled ? "on" : "off");
+      } else if (memcmp(config, "bridge.delay", 12) == 0) {
+        sprintf(reply, "> %d", (uint32_t)_prefs->bridge_delay);
+      } else if (memcmp(config, "bridge.source", 13) == 0) {
+        sprintf(reply, "> %s", _prefs->bridge_pkt_src ? "logRx" : "logTx");
+#endif
+#ifdef WITH_RS232_BRIDGE
+      } else if (memcmp(config, "bridge.baud", 11) == 0) {
+        sprintf(reply, "> %d", (uint32_t)_prefs->bridge_baud);
+#endif
 #ifdef WITH_ESPNOW_BRIDGE
       } else if (memcmp(config, "bridge.channel", 14) == 0) {
         sprintf(reply, "> %d", (uint32_t)_prefs->bridge_channel);
-#endif
+      } else if (memcmp(config, "bridge.secret", 13) == 0) {
+        sprintf(reply, "> %s", _prefs->bridge_secret);
 #endif
       } else {
         sprintf(reply, "??: %s", config);
       }
+    /*
+     * SET commands
+     */
     } else if (memcmp(command, "set ", 4) == 0) {
       const char* config = &command[4];
-#ifdef WITH_BRIDGE
-      if (memcmp(config, "bridge.enabled ", 15) == 0) {
-        _prefs->bridge_enabled = memcmp(&config[15], "on", 2) == 0;
-        _callbacks->setBridgeState(_prefs->bridge_enabled);
-        savePrefs();
-        strcpy(reply, "OK");
-      }
-      else 
-#ifdef WITH_ESPNOW_BRIDGE
-      if (memcmp(config, "bridge.channel ", 15) == 0) {
-        int ch = atoi(&config[15]);
-        if (ch > 0 && ch < 15) {
-          _prefs->bridge_channel = (uint8_t)ch;
-          _callbacks->updateBridgeChannel(ch);
-          savePrefs();
-          strcpy(reply, "OK");
-        } else {
-          strcpy(reply, "Error: channel must be 0 (AUTO) or 1-14");
-        }
-      } else
-#endif
-#endif
       if (memcmp(config, "af ", 3) == 0) {
         _prefs->airtime_factor = atof(&config[3]);
         savePrefs();
@@ -428,6 +435,55 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
         _prefs->freq = atof(&config[5]);
         savePrefs();
         strcpy(reply, "OK - reboot to apply");
+#ifdef WITH_BRIDGE
+      } else if (memcmp(config, "bridge.enabled ", 15) == 0) {
+        _prefs->bridge_enabled = memcmp(&config[15], "on", 2) == 0;
+        _callbacks->setBridgeState(_prefs->bridge_enabled);
+        savePrefs();
+        strcpy(reply, "OK");
+      } else if (memcmp(config, "bridge.delay ", 13) == 0) {
+        int delay = _atoi(&config[13]);
+        if (delay >= 0 && delay <= 10000) {
+          _prefs->bridge_delay = (uint16_t)delay;
+          savePrefs();
+          strcpy(reply, "OK");
+        } else {
+          strcpy(reply, "Error: delay must be between 0-10000 ms");
+        }
+      } else if (memcmp(config, "bridge.source ", 14) == 0) {
+        _prefs->bridge_pkt_src = memcmp(&config[14], "rx", 2) == 0;
+        savePrefs();
+        strcpy(reply, "OK");
+#endif
+#ifdef WITH_RS232_BRIDGE
+      } else if (memcmp(config, "bridge.baud ", 12) == 0) {
+        uint32_t baud = atoi(&config[12]);
+        if (baud >= 9600 && baud <= 115200) {
+          _prefs->bridge_baud = (uint32_t)baud;
+          _callbacks->restartBridge();
+          savePrefs();
+          strcpy(reply, "OK");
+        } else {
+          strcpy(reply, "Error: baud rate must be between 9600-115200");
+        }
+#endif
+#ifdef WITH_ESPNOW_BRIDGE
+      } else if (memcmp(config, "bridge.channel ", 15) == 0) {
+        int ch = atoi(&config[15]);
+        if (ch > 0 && ch < 15) {
+          _prefs->bridge_channel = (uint8_t)ch;
+          _callbacks->restartBridge();
+          savePrefs();
+          strcpy(reply, "OK");
+        } else {
+          strcpy(reply, "Error: channel must be between 1-14");
+        }
+      } else if (memcmp(config, "bridge.secret ", 14) == 0) {
+        StrHelper::strncpy(_prefs->bridge_secret, &config[14], sizeof(_prefs->bridge_secret));
+        _callbacks->restartBridge();
+        savePrefs();
+        strcpy(reply, "OK");
+#endif
       } else {
         sprintf(reply, "unknown config: %s", config);
       }

src/helpers/CommonCLI.h

@@ -30,8 +30,13 @@ struct NodePrefs { // persisted to file
   uint8_t flood_max;
   uint8_t interference_threshold;
   uint8_t agc_reset_interval; // secs / 4
-  uint8_t bridge_enabled;     // boolean
-  uint8_t bridge_channel;     // 1-14
+  // Bridge settings
+  uint8_t bridge_enabled; // boolean
+  uint16_t bridge_delay;  // milliseconds (default 500 ms)
+  uint8_t bridge_pkt_src; // 0 = logTx, 1 = logRx (default logTx)
+  uint32_t bridge_baud;   // 9600, 19200, 38400, 57600, 115200 (default 115200)
+  uint8_t bridge_channel; // 1-14 (ESP-NOW only)
+  char bridge_secret[16]; // for XOR encryption of bridge packets (ESP-NOW only)
 };
 
 class CommonCLICallbacks {
@@ -57,12 +62,13 @@ public:
   virtual void clearStats() = 0;
   virtual void applyTempRadioParams(float freq, float bw, uint8_t sf, uint8_t cr, int timeout_mins) = 0;
 
-#ifdef WITH_BRIDGE
-  virtual void setBridgeState(bool enable) = 0;
-#ifdef WITH_ESPNOW_BRIDGE
-  virtual void updateBridgeChannel(int ch) = 0;
-#endif
-#endif
+  virtual void setBridgeState(bool enable) {
+    // no op by default
+  };
+
+  virtual void restartBridge() {
+    // no op by default
+  };
 };
 
 class CommonCLI {

src/helpers/bridges/BridgeBase.cpp

@@ -40,7 +40,8 @@ void BridgeBase::handleReceivedPacket(mesh::Packet *packet) {
   }
 
   if (!_seen_packets.hasSeen(packet)) {
-    _mgr->queueInbound(packet, millis() + BRIDGE_DELAY);
+    // bridge_delay provides a buffer to prevent immediate processing conflicts in the mesh network.
+    _mgr->queueInbound(packet, millis() + _prefs->bridge_delay);
   } else {
     _mgr->free(packet);
   }

src/helpers/bridges/BridgeBase.h

@@ -1,6 +1,7 @@
 #pragma once
 
 #include "helpers/AbstractBridge.h"
+#include "helpers/CommonCLI.h"
 #include "helpers/SimpleMeshTables.h"
 
 #include <RTClib.h>
@@ -48,34 +49,31 @@ public:
   static constexpr uint16_t BRIDGE_LENGTH_SIZE = sizeof(uint16_t);
   static constexpr uint16_t BRIDGE_CHECKSUM_SIZE = sizeof(uint16_t);
 
-  /**
-   * @brief Default delay in milliseconds for scheduling inbound packet processing
-   *
-   * It provides a buffer to prevent immediate processing conflicts in the mesh network.
-   * Used in handleReceivedPacket() as: millis() + BRIDGE_DELAY
-   */
-  static constexpr uint16_t BRIDGE_DELAY = 500; // TODO: maybe too high ?
-
 protected:
   /** Tracks bridge state */
   bool _initialized = false;
-  
+
   /** Packet manager for allocating and queuing mesh packets */
   mesh::PacketManager *_mgr;
 
   /** RTC clock for timestamping debug messages */
   mesh::RTCClock *_rtc;
 
+  /** Node preferences for configuration settings */
+  NodePrefs *_prefs;
+
   /** Tracks seen packets to prevent loops in broadcast communications */
   SimpleMeshTables _seen_packets;
 
   /**
    * @brief Constructs a BridgeBase instance
    *
+   * @param prefs Node preferences for configuration settings
    * @param mgr PacketManager for allocating and queuing packets
    * @param rtc RTCClock for timestamping debug messages
    */
-  BridgeBase(mesh::PacketManager *mgr, mesh::RTCClock *rtc) : _mgr(mgr), _rtc(rtc) {}
+  BridgeBase(NodePrefs *prefs, mesh::PacketManager *mgr, mesh::RTCClock *rtc)
+      : _prefs(prefs), _mgr(mgr), _rtc(rtc) {}
 
   /**
    * @brief Gets formatted date/time string for logging

src/helpers/bridges/ESPNowBridge.cpp

@@ -21,8 +21,8 @@ void ESPNowBridge::send_cb(const uint8_t *mac, esp_now_send_status_t status) {
   }
 }
 
-ESPNowBridge::ESPNowBridge(mesh::PacketManager *mgr, mesh::RTCClock *rtc)
-    : BridgeBase(mgr, rtc), _rx_buffer_pos(0) {
+ESPNowBridge::ESPNowBridge(NodePrefs *prefs, mesh::PacketManager *mgr, mesh::RTCClock *rtc)
+    : BridgeBase(prefs, mgr, rtc), _rx_buffer_pos(0) {
   _instance = this;
 }
 
@@ -33,8 +33,8 @@ void ESPNowBridge::begin() {
   WiFi.mode(WIFI_STA);
   
   // Set wifi channel
-  if (esp_wifi_set_channel(_channel, WIFI_SECOND_CHAN_NONE) != ESP_OK) {
-    Serial.printf("%s: ESPNOW BRIDGE: Error setting WIFI channel to %d\n", getLogDateTime(), _channel);
+  if (esp_wifi_set_channel(_prefs->bridge_channel, WIFI_SECOND_CHAN_NONE) != ESP_OK) {
+    Serial.printf("%s: ESPNOW BRIDGE: Error setting WIFI channel to %d\n", getLogDateTime(), _prefs->bridge_channel);
     return;
   }
 
@@ -52,7 +52,7 @@ void ESPNowBridge::begin() {
   esp_now_peer_info_t peerInfo = {};
   memset(&peerInfo, 0, sizeof(peerInfo));
   memset(peerInfo.peer_addr, 0xFF, ESP_NOW_ETH_ALEN); // Broadcast address
-  peerInfo.channel = _channel;
+  peerInfo.channel = _prefs->bridge_channel;
   peerInfo.encrypt = false;
 
   if (esp_now_add_peer(&peerInfo) != ESP_OK) {
@@ -94,9 +94,9 @@ void ESPNowBridge::loop() {
 }
 
 void ESPNowBridge::xorCrypt(uint8_t *data, size_t len) {
-  size_t keyLen = strlen(_secret);
+  size_t keyLen = strlen(_prefs->bridge_secret);
   for (size_t i = 0; i < len; i++) {
-    data[i] ^= _secret[i % keyLen];
+    data[i] ^= _prefs->bridge_secret[i % keyLen];
   }
 }
 
@@ -166,10 +166,9 @@ void ESPNowBridge::onDataSent(const uint8_t *mac_addr, esp_now_send_status_t sta
   // Could add transmission error handling here if needed
 }
 
-void ESPNowBridge::onPacketTransmitted(mesh::Packet *packet) {
+void ESPNowBridge::sendPacket(mesh::Packet *packet) {
   // Guard against uninitialized state
   if (_initialized == false) {
-    Serial.printf("%s: ESPNOW BRIDGE: TX packet attempted before initialization\n", getLogDateTime());
     return;
   }
 

src/helpers/bridges/ESPNowBridge.h

@@ -73,22 +73,10 @@ private:
   /** Current position in receive buffer */
   size_t _rx_buffer_pos;
 
-  /**
-   * Network encryption key from build define
-   * Must be defined with WITH_ESPNOW_BRIDGE_SECRET
-   * Used for XOR encryption to isolate different mesh networks
-   */
-  const char *_secret = WITH_ESPNOW_BRIDGE_SECRET;
-
-  /**
-   * Channel for ESP-NOW communication
-   * Valid 2.4GHz channels: 1-14
-   */
-  int _channel = 0;
-
   /**
    * Performs XOR encryption/decryption of data
-   *
+   * Used to isolate different mesh networks
+   * 
    * Uses WITH_ESPNOW_BRIDGE_SECRET as the key in a simple XOR operation.
    * The same operation is used for both encryption and decryption.
    * While not cryptographically secure, it provides basic network isolation.
@@ -121,10 +109,11 @@ public:
   /**
    * Constructs an ESPNowBridge instance
    *
+   * @param prefs Node preferences for configuration settings
    * @param mgr PacketManager for allocating and queuing packets
    * @param rtc RTCClock for timestamping debug messages
    */
-  ESPNowBridge(mesh::PacketManager *mgr, mesh::RTCClock *rtc);
+  ESPNowBridge(NodePrefs *prefs, mesh::PacketManager *mgr, mesh::RTCClock *rtc);
 
   /**
    * Initializes the ESP-NOW bridge
@@ -166,21 +155,7 @@ public:
    *
    * @param packet The mesh packet to transmit
    */
-  void onPacketTransmitted(mesh::Packet *packet) override;
-
-  /**
-   * Gets the current channel
-   *
-   * @return The current channel (0 = AUTO, 1-14 = valid channel)
-   */
-  int getChannel() const { return _channel; }
-
-  /**
-   * Sets the channel for ESP-NOW communication
-   *
-   * @param ch The channel to set (0 = AUTO, 1-14 = valid channel)
-   */
-  void setChannel(int ch) { _channel = ch; }
+  void sendPacket(mesh::Packet *packet) override;
 };
 
 #endif

src/helpers/bridges/RS232Bridge.cpp

@@ -4,11 +4,11 @@
 
 #ifdef WITH_RS232_BRIDGE
 
-RS232Bridge::RS232Bridge(Stream &serial, mesh::PacketManager *mgr, mesh::RTCClock *rtc)
-    : BridgeBase(mgr, rtc), _serial(&serial) {}
+RS232Bridge::RS232Bridge(NodePrefs *prefs, Stream &serial, mesh::PacketManager *mgr, mesh::RTCClock *rtc)
+    : BridgeBase(prefs, mgr, rtc), _serial(&serial) {}
 
 void RS232Bridge::begin() {
-  Serial.printf("%s: RS232 BRIDGE: Initializing...\n", getLogDateTime());
+  Serial.printf("%s: RS232 BRIDGE: Initializing at %d baud...\n", getLogDateTime(), _prefs->bridge_baud);
 #if !defined(WITH_RS232_BRIDGE_RX) || !defined(WITH_RS232_BRIDGE_TX)
 #error "WITH_RS232_BRIDGE_RX and WITH_RS232_BRIDGE_TX must be defined"
 #endif
@@ -26,7 +26,7 @@ void RS232Bridge::begin() {
 #else
 #error RS232Bridge was not tested on the current platform
 #endif
-  ((HardwareSerial *)_serial)->begin(115200);
+  ((HardwareSerial *)_serial)->begin(_prefs->bridge_baud);
 
   // Update bridge state
   _initialized = true;
@@ -114,10 +114,9 @@ void RS232Bridge::loop() {
   }
 }
 
-void RS232Bridge::onPacketTransmitted(mesh::Packet *packet) {
+void RS232Bridge::sendPacket(mesh::Packet *packet) {
   // Guard against uninitialized state
   if (_initialized == false) {
-    Serial.printf("%s: ESPNOW BRIDGE: TX packet attempted before initialization\n", getLogDateTime());
     return;
   }
 

src/helpers/bridges/RS232Bridge.h

@@ -49,11 +49,12 @@ public:
   /**
    * @brief Constructs an RS232Bridge instance
    *
+   * @param prefs Node preferences for configuration settings
    * @param serial The hardware serial port to use
    * @param mgr PacketManager for allocating and queuing packets
    * @param rtc RTCClock for timestamping debug messages
    */
-  RS232Bridge(Stream &serial, mesh::PacketManager *mgr, mesh::RTCClock *rtc);
+  RS232Bridge(NodePrefs *prefs, Stream &serial, mesh::PacketManager *mgr, mesh::RTCClock *rtc);
 
   /**
    * Initializes the RS232 bridge
@@ -96,7 +97,7 @@ public:
    *
    * @param packet The mesh packet to transmit
    */
-  void onPacketTransmitted(mesh::Packet *packet) override;
+  void sendPacket(mesh::Packet *packet) override;
 
   /**
    * @brief Called when a complete valid packet has been received from serial