Merge official v1.16.0 firmware and resolve conflicts

examples/simple_repeater/MyMesh.cpp

@@ -756,7 +756,11 @@ void MyMesh::sendFloodReply(mesh::Packet* packet, unsigned long delay_millis, ui
 
 bool MyMesh::allowPacketForward(const mesh::Packet *packet) {
   if (_prefs.disable_fwd) return false;
-  if (packet->isRouteFlood() && packet->getPathHashCount() >= _prefs.flood_max) return false;
+  if (packet->isRouteFlood()) {
+    if (packet->getPathHashCount() >= _prefs.flood_max) return false;
+    if (packet->getRouteType() == ROUTE_TYPE_FLOOD && packet->getPathHashCount() >= _prefs.flood_max_unscoped) return false;
+    if (packet->getPayloadType() == PAYLOAD_TYPE_ADVERT && packet->getPathHashCount() >= _prefs.flood_max_advert) return false;
+  }
   if (packet->isRouteFlood() && recv_pkt_region == NULL) {
     MESH_DEBUG_PRINTLN("allowPacketForward: unknown transport code, or wildcard not allowed for FLOOD packet");
     return false;
@@ -970,7 +974,7 @@ void MyMesh::onAdvertRecv(mesh::Packet *packet, const mesh::Identity &id, uint32
   mesh::Mesh::onAdvertRecv(packet, id, timestamp, app_data, app_data_len); // chain to super impl
 
   // if this a zero hop advert (and not via 'Share'), add it to neighbours
-  if (packet->path_len == 0 && !isShare(packet)) {
+  if (packet->getPathHashCount() == 0 && !isShare(packet)) {
     AdvertDataParser parser(app_data, app_data_len);
     if (parser.isValid() && parser.getType() == ADV_TYPE_REPEATER) { // just keep neigbouring Repeaters
       putNeighbour(id, timestamp, packet->getSNR());
@@ -1230,8 +1234,10 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
   _prefs.cr = LORA_CR;
   _prefs.tx_power_dbm = LORA_TX_POWER;
   _prefs.advert_interval = 1;        // default to 2 minutes for NEW installs
-  _prefs.flood_advert_interval = 12; // 12 hours
+  _prefs.flood_advert_interval = 47; // 47 hours
   _prefs.flood_max = 64;
+  _prefs.flood_max_unscoped = 64;
+  _prefs.flood_max_advert = 8;
   _prefs.interference_threshold = 0; // disabled
 
   // bridge defaults
@@ -1348,8 +1354,8 @@ void MyMesh::begin(FILESYSTEM *fs, ArchiveStorage* archive) {
   mqtt.begin(_fs);
 #endif
 
-  radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
-  radio_set_tx_power(_prefs.tx_power_dbm);
+  radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
+  radio_driver.setTxPower(_prefs.tx_power_dbm);
 
   radio_driver.setRxBoostedGainMode(_prefs.rx_boosted_gain);
   MESH_DEBUG_PRINTLN("RX Boosted Gain Mode: %s",
@@ -1464,7 +1470,7 @@ void MyMesh::dumpLogFile() {
 }
 
 void MyMesh::setTxPower(int8_t power_dbm) {
-  radio_set_tx_power(power_dbm);
+  radio_driver.setTxPower(power_dbm);
 }
 
 #if defined(USE_SX1262) || defined(USE_SX1268)
@@ -2762,13 +2768,13 @@ void MyMesh::loop() {
 
   if (set_radio_at && millisHasNowPassed(set_radio_at)) { // apply pending (temporary) radio params
     set_radio_at = 0;                                     // clear timer
-    radio_set_params(pending_freq, pending_bw, pending_sf, pending_cr);
+    radio_driver.setParams(pending_freq, pending_bw, pending_sf, pending_cr);
     MESH_DEBUG_PRINTLN("Temp radio params");
   }
 
   if (revert_radio_at && millisHasNowPassed(revert_radio_at)) { // revert radio params to orig
     revert_radio_at = 0;                                        // clear timer
-    radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
+    radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
     MESH_DEBUG_PRINTLN("Radio params restored");
   }