Merge official v1.16.0 firmware and resolve conflicts

examples/simple_repeater/MyMesh.cpp

@@ -756,7 +756,11 @@ void MyMesh::sendFloodReply(mesh::Packet* packet, unsigned long delay_millis, ui
 
 bool MyMesh::allowPacketForward(const mesh::Packet *packet) {
   if (_prefs.disable_fwd) return false;
-  if (packet->isRouteFlood() && packet->getPathHashCount() >= _prefs.flood_max) return false;
+  if (packet->isRouteFlood()) {
+    if (packet->getPathHashCount() >= _prefs.flood_max) return false;
+    if (packet->getRouteType() == ROUTE_TYPE_FLOOD && packet->getPathHashCount() >= _prefs.flood_max_unscoped) return false;
+    if (packet->getPayloadType() == PAYLOAD_TYPE_ADVERT && packet->getPathHashCount() >= _prefs.flood_max_advert) return false;
+  }
   if (packet->isRouteFlood() && recv_pkt_region == NULL) {
     MESH_DEBUG_PRINTLN("allowPacketForward: unknown transport code, or wildcard not allowed for FLOOD packet");
     return false;
@@ -970,7 +974,7 @@ void MyMesh::onAdvertRecv(mesh::Packet *packet, const mesh::Identity &id, uint32
   mesh::Mesh::onAdvertRecv(packet, id, timestamp, app_data, app_data_len); // chain to super impl
 
   // if this a zero hop advert (and not via 'Share'), add it to neighbours
-  if (packet->path_len == 0 && !isShare(packet)) {
+  if (packet->getPathHashCount() == 0 && !isShare(packet)) {
     AdvertDataParser parser(app_data, app_data_len);
     if (parser.isValid() && parser.getType() == ADV_TYPE_REPEATER) { // just keep neigbouring Repeaters
       putNeighbour(id, timestamp, packet->getSNR());
@@ -1230,8 +1234,10 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
   _prefs.cr = LORA_CR;
   _prefs.tx_power_dbm = LORA_TX_POWER;
   _prefs.advert_interval = 1;        // default to 2 minutes for NEW installs
-  _prefs.flood_advert_interval = 12; // 12 hours
+  _prefs.flood_advert_interval = 47; // 47 hours
   _prefs.flood_max = 64;
+  _prefs.flood_max_unscoped = 64;
+  _prefs.flood_max_advert = 8;
   _prefs.interference_threshold = 0; // disabled
 
   // bridge defaults
@@ -1348,8 +1354,8 @@ void MyMesh::begin(FILESYSTEM *fs, ArchiveStorage* archive) {
   mqtt.begin(_fs);
 #endif
 
-  radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
-  radio_set_tx_power(_prefs.tx_power_dbm);
+  radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
+  radio_driver.setTxPower(_prefs.tx_power_dbm);
 
   radio_driver.setRxBoostedGainMode(_prefs.rx_boosted_gain);
   MESH_DEBUG_PRINTLN("RX Boosted Gain Mode: %s",
@@ -1464,7 +1470,7 @@ void MyMesh::dumpLogFile() {
 }
 
 void MyMesh::setTxPower(int8_t power_dbm) {
-  radio_set_tx_power(power_dbm);
+  radio_driver.setTxPower(power_dbm);
 }
 
 #if defined(USE_SX1262) || defined(USE_SX1268)
@@ -2762,13 +2768,13 @@ void MyMesh::loop() {
 
   if (set_radio_at && millisHasNowPassed(set_radio_at)) { // apply pending (temporary) radio params
     set_radio_at = 0;                                     // clear timer
-    radio_set_params(pending_freq, pending_bw, pending_sf, pending_cr);
+    radio_driver.setParams(pending_freq, pending_bw, pending_sf, pending_cr);
     MESH_DEBUG_PRINTLN("Temp radio params");
   }
 
   if (revert_radio_at && millisHasNowPassed(revert_radio_at)) { // revert radio params to orig
     revert_radio_at = 0;                                        // clear timer
-    radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
+    radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
     MESH_DEBUG_PRINTLN("Radio params restored");
   }
 

examples/simple_repeater/MyMesh.h

@@ -117,7 +117,7 @@ struct NeighbourInfo {
 #endif
 
 #ifndef FIRMWARE_VERSION
-  #define FIRMWARE_VERSION   "v1.15.0-vbart-meshcoretel"
+  #define FIRMWARE_VERSION   "v1.16.0-vbart-meshcoretel"
 #endif
 
 #define FIRMWARE_ROLE "repeater"

examples/simple_repeater/UITask.cpp

@@ -53,17 +53,25 @@ void UITask::renderCurrScreen() {
     int logoWidth = 128;
     _display->drawXbm((_display->width() - logoWidth) / 2, 3, meshcore_logo, logoWidth, 13);
 
+    // meshcore website
+    const char* website = "https://meshcore.io";
+    _display->setColor(DisplayDriver::LIGHT);
+    _display->setTextSize(1);
+    uint16_t websiteWidth = _display->getTextWidth(website);
+    _display->setCursor((_display->width() - websiteWidth) / 2, 22);
+    _display->print(website);
+
     // version info
     _display->setColor(DisplayDriver::LIGHT);
     _display->setTextSize(1);
     uint16_t versionWidth = _display->getTextWidth(_version_info);
-    _display->setCursor((_display->width() - versionWidth) / 2, 22);
+    _display->setCursor((_display->width() - versionWidth) / 2, 35);
     _display->print(_version_info);
 
     // node type
     const char* node_type = "< Repeater >";
     uint16_t typeWidth = _display->getTextWidth(node_type);
-    _display->setCursor((_display->width() - typeWidth) / 2, 35);
+    _display->setCursor((_display->width() - typeWidth) / 2, 48);
     _display->print(node_type);
   } else {  // home screen
     // node name

examples/simple_repeater/main.cpp

@@ -22,8 +22,7 @@ void halt() {
 static char command[160];
 
 // For power saving
-unsigned long lastActive = 0; // mark last active time
-unsigned long nextSleepinSecs = 120; // next sleep in seconds. The first sleep (if enabled) is after 2 minutes from boot
+unsigned long POWERSAVING_FIRSTSLEEP_SECS = 120; // The first sleep (if enabled) from boot
 
 #if defined(PIN_USER_BTN) && defined(_SEEED_SENSECAP_SOLAR_H_)
 static unsigned long userBtnDownAt = 0;
@@ -43,9 +42,6 @@ void setup() {
   delay(5000);
 #endif
 
-  // For power saving
-  lastActive = millis(); // mark last active time since boot
-
 #ifdef DISPLAY_CLASS
   if (display.begin()) {
     display.startFrame();
@@ -60,7 +56,7 @@ void setup() {
     halt();
   }
 
-  fast_rng.begin(radio_get_rng_seed());
+  fast_rng.begin(radio_driver.getRngSeed());
 
   FILESYSTEM* fs;
 #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
@@ -106,6 +102,8 @@ void setup() {
 #if ENABLE_ADVERT_ON_BOOT == 1
   the_mesh.sendSelfAdvertisement(16000, false);
 #endif
+
+  board.onBootComplete();
 }
 
 void loop() {
@@ -162,16 +160,12 @@ void loop() {
   rtc_clock.tick();
 
   if (the_mesh.getNodePrefs()->powersaving_enabled && !the_mesh.hasPendingWork()) {
-    #if defined(NRF52_PLATFORM)
-    board.sleep(1800); // nrf ignores seconds param, sleeps whenever possible
-    #else
-    if (the_mesh.millisHasNowPassed(lastActive + nextSleepinSecs * 1000)) { // To check if it is time to sleep
-      board.sleep(1800);             // To sleep. Wake up after 30 minutes or when receiving a LoRa packet
-      lastActive = millis();
-      nextSleepinSecs = 5;  // Default: To work for 5s and sleep again
-    } else {
-      nextSleepinSecs += 5; // When there is pending work, to work another 5s
+#if defined(NRF52_PLATFORM)
+    board.sleep(0); // nrf ignores seconds param, sleeps whenever possible
+#else
+    if (the_mesh.millisHasNowPassed(POWERSAVING_FIRSTSLEEP_SECS * 1000)) { // To check if it is time to sleep
+      board.sleep(30); // Sleep. Wake up after a while or when receiving a LoRa packet
     }
-    #endif
+#endif
   }
 }