tracker_l1: fix bme226 init in ESM to include all sensors

src/helpers/sensors/EnvironmentSensorManager.cpp

@@ -70,7 +70,7 @@ static Adafruit_INA260 INA260;
 #define TELEM_INA226_SHUNT_VALUE 0.100
 #define TELEM_INA226_MAX_AMP 0.8
 #include <INA226.h>
-static INA226 INA226(TELEM_INA226_ADDRESS);
+static INA226 INA226(TELEM_INA226_ADDRESS, TELEM_WIRE);
 #endif
 
 #if ENV_INCLUDE_MLX90614

variants/wio-tracker-l1-eink/platformio.ini

@@ -3,6 +3,7 @@ extends = nrf52_base
 board = seeed-wio-tracker-l1
 board_build.ldscript = boards/nrf52840_s140_v7.ld
 build_flags = ${nrf52_base.build_flags}
+  ${sensor_base.build_flags}
   -I lib/nrf52/s140_nrf52_7.3.0_API/include
   -I lib/nrf52/s140_nrf52_7.3.0_API/include/nrf52
   -I variants/wio-tracker-l1
@@ -22,8 +23,6 @@ build_flags = ${nrf52_base.build_flags}
   -D DISPLAY_ROTATION=1
   -D DISABLE_DIAGNOSTIC_OUTPUT
   -D AUTO_OFF_MILLIS=0
-  -D ENV_INCLUDE_GPS=1
-  -D ENV_INCLUDE_BME280=1
   -D GPS_BAUD_RATE=9600
   -D ENV_PIN_SDA=PIN_WIRE1_SDA
   -D ENV_PIN_SCL=PIN_WIRE1_SCL
@@ -33,12 +32,10 @@ build_src_filter = ${nrf52_base.build_src_filter}
   +<helpers/ui/GxEPDDisplay.cpp>
   +<helpers/sensors>
 lib_deps= ${nrf52_base.lib_deps}
-  adafruit/Adafruit SH110X @ ^2.1.13
+  ${sensor_base.lib_deps}
   adafruit/Adafruit GFX Library @ ^1.12.1
-  stevemarple/MicroNMEA @ ^2.0.6
   zinggjm/GxEPD2 @ 1.6.2
   bakercp/CRC32 @ ^2.0.0
-  adafruit/Adafruit BME280 Library @ ^2.3.0
 
 [env:WioTrackerL1Eink_companion_radio_ble]
 extends = WioTrackerL1Eink

variants/wio-tracker-l1/platformio.ini

@@ -3,6 +3,7 @@ extends = nrf52_base
 board = seeed-wio-tracker-l1
 board_build.ldscript = boards/nrf52840_s140_v7.ld
 build_flags = ${nrf52_base.build_flags}
+  ${sensor_base.build_flags}
   -I lib/nrf52/s140_nrf52_7.3.0_API/include
   -I lib/nrf52/s140_nrf52_7.3.0_API/include/nrf52
   -I variants/wio-tracker-l1
@@ -13,8 +14,6 @@ build_flags = ${nrf52_base.build_flags}
   -D SX126X_CURRENT_LIMIT=140
   -D SX126X_RX_BOOSTED_GAIN=1
   -D PIN_OLED_RESET=-1
-  -D ENV_INCLUDE_GPS=1
-  -D ENV_INCLUDE_BME280=1
   -D GPS_BAUD_RATE=9600
   -D ENV_PIN_SDA=PIN_WIRE1_SDA
   -D ENV_PIN_SCL=PIN_WIRE1_SCL
@@ -24,9 +23,9 @@ build_src_filter = ${nrf52_base.build_src_filter}
   +<helpers/ui/SH1106Display.cpp>
   +<helpers/sensors>
 lib_deps= ${nrf52_base.lib_deps}
+  ${sensor_base.lib_deps}
   adafruit/Adafruit SH110X @ ^2.1.13
   adafruit/Adafruit GFX Library @ ^1.12.1
-  stevemarple/MicroNMEA @ ^2.0.6
 
 [env:WioTrackerL1_Repeater]
 extends = WioTrackerL1