* companion client repeat mode support

examples/companion_radio/DataStore.cpp

@@ -212,7 +212,7 @@ void DataStore::loadPrefsInt(const char *filename, NodePrefs& _prefs, double& no
     file.read((uint8_t *)&_prefs.freq, sizeof(_prefs.freq));                               // 56
     file.read((uint8_t *)&_prefs.sf, sizeof(_prefs.sf));                                   // 60
     file.read((uint8_t *)&_prefs.cr, sizeof(_prefs.cr));                                   // 61
-    file.read(pad, 1);                                                                     // 62
+    file.read((uint8_t *)&_prefs.client_repeat, sizeof(_prefs.client_repeat));             // 62
     file.read((uint8_t *)&_prefs.manual_add_contacts, sizeof(_prefs.manual_add_contacts)); // 63
     file.read((uint8_t *)&_prefs.bw, sizeof(_prefs.bw));                                   // 64
     file.read((uint8_t *)&_prefs.tx_power_dbm, sizeof(_prefs.tx_power_dbm));               // 68
@@ -247,7 +247,7 @@ void DataStore::savePrefs(const NodePrefs& _prefs, double node_lat, double node_
     file.write((uint8_t *)&_prefs.freq, sizeof(_prefs.freq));                               // 56
     file.write((uint8_t *)&_prefs.sf, sizeof(_prefs.sf));                                   // 60
     file.write((uint8_t *)&_prefs.cr, sizeof(_prefs.cr));                                   // 61
-    file.write(pad, 1);                                                                     // 62
+    file.write((uint8_t *)&_prefs.client_repeat, sizeof(_prefs.client_repeat));             // 62
     file.write((uint8_t *)&_prefs.manual_add_contacts, sizeof(_prefs.manual_add_contacts)); // 63
     file.write((uint8_t *)&_prefs.bw, sizeof(_prefs.bw));                                   // 64
     file.write((uint8_t *)&_prefs.tx_power_dbm, sizeof(_prefs.tx_power_dbm));               // 68

examples/companion_radio/MyMesh.cpp

@@ -56,6 +56,7 @@
 #define CMD_SEND_ANON_REQ             57
 #define CMD_SET_AUTOADD_CONFIG        58
 #define CMD_GET_AUTOADD_CONFIG        59
+#define CMD_GET_ALLOWED_REPEAT_FREQ   60
 
 // Stats sub-types for CMD_GET_STATS
 #define STATS_TYPE_CORE               0
@@ -88,6 +89,7 @@
 #define RESP_CODE_TUNING_PARAMS       23
 #define RESP_CODE_STATS               24   // v8+, second byte is stats type
 #define RESP_CODE_AUTOADD_CONFIG      25
+#define RESP_ALLOWED_REPEAT_FREQ      26
 
 #define SEND_TIMEOUT_BASE_MILLIS        500
 #define FLOOD_SEND_TIMEOUT_FACTOR       16.0f
@@ -455,6 +457,10 @@ bool MyMesh::filterRecvFloodPacket(mesh::Packet* packet) {
   return false;
 }
 
+bool MyMesh::allowPacketForward(const mesh::Packet* packet) {
+  return _prefs.client_repeat != 0;
+}
+
 void MyMesh::sendFloodScoped(const ContactInfo& recipient, mesh::Packet* pkt, uint32_t delay_millis) {
   // TODO: dynamic send_scope, depending on recipient and current 'home' Region
   if (send_scope.isNull()) {
@@ -881,6 +887,24 @@ uint32_t MyMesh::getBLEPin() {
   return _active_ble_pin;
 }
 
+struct FreqRange {
+  uint32_t lower_freq, upper_freq;
+};
+
+static FreqRange repeat_freq_ranges[] = {
+  { 433000, 433000 },
+  { 869000, 869000 },
+  { 918000, 918000 }
+};
+
+bool MyMesh::isValidClientRepeatFreq(uint32_t f) const {
+  for (int i = 0; i < sizeof(repeat_freq_ranges)/sizeof(repeat_freq_ranges[0]); i++) {
+    auto r = &repeat_freq_ranges[i];
+    if (f >= r->lower_freq && f <= r->upper_freq) return true;
+  }
+  return false;
+}
+
 void MyMesh::startInterface(BaseSerialInterface &serial) {
   _serial = &serial;
   serial.enable();
@@ -1208,13 +1232,20 @@ void MyMesh::handleCmdFrame(size_t len) {
     i += 4;
     uint8_t sf = cmd_frame[i++];
     uint8_t cr = cmd_frame[i++];
+    uint8_t repeat = 0;  // default - false
+    if (len > i) {
+      repeat = cmd_frame[i++];   // FIRMWARE_VER_CODE  9+
+    }
 
-    if (freq >= 300000 && freq <= 2500000 && sf >= 5 && sf <= 12 && cr >= 5 && cr <= 8 && bw >= 7000 &&
+    if (repeat && !isValidClientRepeatFreq(freq)) {
+      writeErrFrame(ERR_CODE_ILLEGAL_ARG);
+    } else if (freq >= 300000 && freq <= 2500000 && sf >= 5 && sf <= 12 && cr >= 5 && cr <= 8 && bw >= 7000 &&
         bw <= 500000) {
       _prefs.sf = sf;
       _prefs.cr = cr;
       _prefs.freq = (float)freq / 1000.0;
       _prefs.bw = (float)bw / 1000.0;
+      _prefs.client_repeat = repeat;
       savePrefs();
 
       radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
@@ -1741,6 +1772,15 @@ void MyMesh::handleCmdFrame(size_t len) {
     out_frame[i++] = RESP_CODE_AUTOADD_CONFIG;
     out_frame[i++] = _prefs.autoadd_config;
     _serial->writeFrame(out_frame, i);
+  } else if (cmd_frame[0] == CMD_GET_ALLOWED_REPEAT_FREQ) {
+    int i = 0;
+    out_frame[i++] = RESP_ALLOWED_REPEAT_FREQ;
+    for (int k = 0; k < sizeof(repeat_freq_ranges)/sizeof(repeat_freq_ranges[0]) && i + 8 < sizeof(out_frame); k++) {
+      auto r = &repeat_freq_ranges[k];
+      memcpy(&out_frame[i], &r->lower_freq, 4); i += 4;
+      memcpy(&out_frame[i], &r->upper_freq, 4); i += 4;
+    }
+    _serial->writeFrame(out_frame, i);
   } else {
     writeErrFrame(ERR_CODE_UNSUPPORTED_CMD);
     MESH_DEBUG_PRINTLN("ERROR: unknown command: %02X", cmd_frame[0]);

examples/companion_radio/MyMesh.h

@@ -5,7 +5,7 @@
 #include "AbstractUITask.h"
 
 /*------------ Frame Protocol --------------*/
-#define FIRMWARE_VER_CODE 8
+#define FIRMWARE_VER_CODE 9
 
 #ifndef FIRMWARE_BUILD_DATE
 #define FIRMWARE_BUILD_DATE "29 Jan 2026"
@@ -108,6 +108,7 @@ protected:
   int calcRxDelay(float score, uint32_t air_time) const override;
   uint8_t getExtraAckTransmitCount() const override;
   bool filterRecvFloodPacket(mesh::Packet* packet) override;
+  bool allowPacketForward(const mesh::Packet* packet) override;
 
   void sendFloodScoped(const ContactInfo& recipient, mesh::Packet* pkt, uint32_t delay_millis=0) override;
   void sendFloodScoped(const mesh::GroupChannel& channel, mesh::Packet* pkt, uint32_t delay_millis=0) override;
@@ -176,6 +177,7 @@ private:
 
   void checkCLIRescueCmd();
   void checkSerialInterface();
+  bool isValidClientRepeatFreq(uint32_t f) const;
 
   // helpers, short-cuts
   void saveChannels() { _store->saveChannels(this); }

examples/companion_radio/NodePrefs.h

@@ -28,4 +28,5 @@ struct NodePrefs {  // persisted to file
   uint8_t  gps_enabled;      // GPS enabled flag (0=disabled, 1=enabled)
   uint32_t gps_interval;     // GPS read interval in seconds
   uint8_t autoadd_config;    // bitmask for auto-add contacts config
+  uint8_t client_repeat;
 };