shade/MeshCoreTel-firmware
1
0
Bifurcation 0
Code Tickets Demandes d'ajout Actions 3 Paquets Projets Publications Wiki Activité

Removed EastMesh MQTT broker support.

Parcourir la source 
It's intended for Eastern Australia repeaters only.  Using original EastMesh
firmware is prefered in this case.
Cette révision appartient à :
Valentin V. Bartenev
2026-04-28 00:52:26 +03:00
Parent 64cebbc750
révision 46b0df7a4b
8 fichiers modifiés avec 64 ajouts et 413 suppressions
Télécharger le Fichier Patch Télécharger le Fichier des Différences Développer tous les fichiers Réduire tous les fichiers
examples/simple_repeater/MyMesh.cpp
+2 -10
Voir le fichier
@@ -2302,14 +2302,12 @@ void MyMesh::handleCommand(uint32_t sender_timestamp, char *command, char *reply
sprintf(reply, "> %s", mqtt.isRawEnabled() ? "on" : "off");
} else if (memcmp(command, "get mqtt.tx", 11) == 0) {
sprintf(reply, "> %s", mqtt.isTxEnabled() ? "on" : "off");
} else if (memcmp(command, "get mqtt.eastmesh-au", 20) == 0 || memcmp(command, "get mqtt.eastmesh.au", 20) == 0) {
} else if (memcmp(command, "get mqtt.meshcoretel", 21) == 0) {
sprintf(reply, "> %s", mqtt.isEndpointEnabled(0x01) ? "on" : "off");
} else if (memcmp(command, "get mqtt.letsmesh-eu", 21) == 0 || memcmp(command, "get mqtt.letsmesh.eu", 21) == 0) {
sprintf(reply, "> %s", mqtt.isEndpointEnabled(0x02) ? "on" : "off");
} else if (memcmp(command, "get mqtt.letsmesh-us", 21) == 0 || memcmp(command, "get mqtt.letsmesh.us", 21) == 0) {
sprintf(reply, "> %s", mqtt.isEndpointEnabled(0x04) ? "on" : "off");
} else if (memcmp(command, "get mqtt.meshcoretel", 20) == 0) {
sprintf(reply, "> %s", mqtt.isEndpointEnabled(0x08) ? "on" : "off");
} else if (memcmp(command, "set mqtt.tx ", 12) == 0) {
mqtt.setTxEnabled(memcmp(&command[12], "on", 2) == 0);
strcpy(reply, "OK");
@@ -2340,7 +2338,7 @@ void MyMesh::handleCommand(uint32_t sender_timestamp, char *command, char *reply
} else if (memcmp(command, "set mqtt.status ", 16) == 0) {
mqtt.setStatusEnabled(memcmp(&command[16], "on", 2) == 0);
strcpy(reply, "OK");
} else if (memcmp(command, "set mqtt.eastmesh-au ", 21) == 0 || memcmp(command, "set mqtt.eastmesh.au ", 21) == 0) {
} else if (memcmp(command, "set mqtt.meshcoretel ", 21) == 0) {
if (mqtt.setEndpointEnabled(0x01, memcmp(&command[21], "on", 2) == 0)) {
strcpy(reply, "OK");
} else {
@@ -2358,12 +2356,6 @@ void MyMesh::handleCommand(uint32_t sender_timestamp, char *command, char *reply
} else {
strcpy(reply, "Err - max 2 mqtt brokers");
}
} else if (memcmp(command, "set mqtt.meshcoretel ", 21) == 0) {
if (mqtt.setEndpointEnabled(0x08, memcmp(&command[21], "on", 2) == 0)) {
strcpy(reply, "OK");
} else {
strcpy(reply, "Err - max 2 mqtt brokers");
}
#endif
} else{
_cli.handleCommand(sender_timestamp, command, reply); // common CLI commands