NRF52: disable autoshutdown if powered, add auto-shutdown warning for oled

examples/companion_radio/ui-new/UITask.cpp

@@ -832,10 +832,7 @@ void UITask::loop() {
   if (millis() > next_batt_chck) {
     uint16_t milliVolts = getBattMilliVolts();
     if (milliVolts > 0 && milliVolts < AUTO_SHUTDOWN_MILLIVOLTS) {
-
-      // show low battery shutdown alert
-      // we should only do this for eink displays, which will persist after power loss
-      #if defined(THINKNODE_M1) || defined(LILYGO_TECHO)
+      if(!board.isExternalPowered()) {
         if (_display != NULL) {
           _display->startFrame();
           _display->setTextSize(2);
@@ -843,11 +840,12 @@ void UITask::loop() {
           _display->drawTextCentered(_display->width() / 2, 20, "Low Battery.");
           _display->drawTextCentered(_display->width() / 2, 40, "Shutting Down!");
           _display->endFrame();
-      }
+          #if !defined(THINKNODE_M1) && !defined(LILYGO_TECHO) // TODO: refactor eink variants to use EINK_DISPLAY macros to gate this properly
+          delay(3000);
           #endif
-
+        }
         shutdown();
-
+      }
     }
     next_batt_chck = millis() + 8000;
   }

examples/companion_radio/ui-tiny/UITask.cpp

@@ -727,14 +727,23 @@ void UITask::loop() {
   if (millis() > next_batt_chck) {
     _cached_batt_mv = getBattMilliVolts();
     if (_cached_batt_mv > 0 && _cached_batt_mv < AUTO_SHUTDOWN_MILLIVOLTS) {
-
+      if(!board.isExternalPowered()) {
+        if (_display != NULL) {
+        _display->startFrame();
+        _display->setTextSize(2);
+        _display->drawTextCentered(_display->width() / 2, 6, "Low battery!");
+        _display->setTextSize(1);
+        _display->drawTextCentered(_display->width() / 2, 18, "Shutting down!");
+        _display->endFrame();
+        delay(3000); // TODO: refactor eink variants to use EINK_DISPLAY macros to gate this properly
+        }
         shutdown();
-
+      }
     }
     next_batt_chck = millis() + 8000;
   }
 #else
-  if (_display != NULL && _display->isOn() && millis >= next_batt_chck) {
+  if (_display != NULL && _display->isOn() && millis() >= next_batt_chck) {
     _cached_batt_mv = getBattMilliVolts();
     next_batt_chck = millis() + 8000;
   }