remove old tbeam def

variants/lilygo_tbeam/target.cpp

@@ -1,181 +0,0 @@
-#include <Arduino.h>
-#include "target.h"
-
-TBeamBoard board;
-
-// Using PMU AXP2102
-#define PMU_WIRE_PORT Wire
-
-bool pmuIntFlag = false;
-static void setPMUIntFlag(){
-  pmuIntFlag = true;
-}
-
-#if defined(P_LORA_SCLK)
-  static SPIClass spi;
-  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_0, P_LORA_RESET, P_LORA_DIO_1, spi);
-#else
-  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_0, P_LORA_RESET, P_LORA_DIO_1);
-#endif
-
-WRAPPER_CLASS radio_driver(radio, board);
-
-ESP32RTCClock fallback_clock;
-AutoDiscoverRTCClock rtc_clock(fallback_clock);
-SensorManager sensors;
-
-#ifdef DISPLAY_CLASS
-  DISPLAY_CLASS display;
-#endif
-
-#ifndef LORA_CR
-  #define LORA_CR      5
-#endif
-
-bool TBeamBoard::power_init() {
-  if (!PMU) {
-    PMU = new XPowersAXP2101(PMU_WIRE_PORT);
-    if (!PMU->init()) {
-      // Serial.println("Warning: Failed to find AXP2101 power management");
-      delete PMU;
-      PMU = NULL;
-    }
-    else {
-      // Serial.println("AXP2101 PMU init succeeded, using AXP2101 PMU");
-    }
-  }
-  if (!PMU) {
-    PMU = new XPowersAXP192(PMU_WIRE_PORT);
-    if (!PMU->init()) {
-      // Serial.println("Warning: Failed to find AXP192 power management");
-      delete PMU;
-      PMU = NULL;
-    }
-    else {
-      // Serial.println("AXP192 PMU init succeeded, using AXP192 PMU");
-    }
-  }
-
-  if (!PMU) {
-    MESH_DEBUG_PRINTLN("PMU init failed.");
-    return false;
-  }
-
-  // Serial.printf("PMU  ID:0x%x\n", PMU->getChipID());
-  // printPMU();
-  if (PMU->getChipModel() == XPOWERS_AXP192) {
-    // lora radio power channel
-    PMU->setPowerChannelVoltage(XPOWERS_LDO2, 3300);
-    PMU->enablePowerOutput(XPOWERS_LDO2);
-    // oled module power channel,
-    // disable it will cause abnormal communication between boot and AXP power supply,
-    // do not turn it off
-    PMU->setPowerChannelVoltage(XPOWERS_DCDC1, 3300);
-    // enable oled power
-    PMU->enablePowerOutput(XPOWERS_DCDC1);
-    // gnss module power channel
-    PMU->setPowerChannelVoltage(XPOWERS_LDO3, 3300);
-    // power->enablePowerOutput(XPOWERS_LDO3);
-    // protected oled power source
-    PMU->setProtectedChannel(XPOWERS_DCDC1);
-    // protected esp32 power source
-    PMU->setProtectedChannel(XPOWERS_DCDC3);
-    // disable not use channel
-    PMU->disablePowerOutput(XPOWERS_DCDC2);
-    // disable all axp chip interrupt
-    PMU->disableIRQ(XPOWERS_AXP192_ALL_IRQ);
-    PMU->setChargerConstantCurr(XPOWERS_AXP192_CHG_CUR_550MA);
-  }
-  else if (PMU->getChipModel() == XPOWERS_AXP2101) {
-    // gnss module power channel
-    PMU->setPowerChannelVoltage(XPOWERS_ALDO4, 3300);
-    PMU->enablePowerOutput(XPOWERS_ALDO4);
-    // lora radio power channel
-    PMU->setPowerChannelVoltage(XPOWERS_ALDO3, 3300);
-    PMU->enablePowerOutput(XPOWERS_ALDO3);
-    // m.2 interface
-    PMU->setPowerChannelVoltage(XPOWERS_DCDC3, 3300);
-    PMU->enablePowerOutput(XPOWERS_DCDC3);
-    // power->setPowerChannelVoltage(XPOWERS_DCDC4, 3300);
-    // power->enablePowerOutput(XPOWERS_DCDC4);
-    // not use channel
-    PMU->disablePowerOutput(XPOWERS_DCDC2); // not elicited
-    PMU->disablePowerOutput(XPOWERS_DCDC5); // not elicited
-    PMU->disablePowerOutput(XPOWERS_DLDO1); // Invalid power channel, it does not exist
-    PMU->disablePowerOutput(XPOWERS_DLDO2); // Invalid power channel, it does not exist
-    PMU->disablePowerOutput(XPOWERS_VBACKUP);
-    // disable all axp chip interrupt
-    PMU->disableIRQ(XPOWERS_AXP2101_ALL_IRQ);
-    PMU->setChargerConstantCurr(XPOWERS_AXP2101_CHG_CUR_500MA);
-
-    // Set up PMU interrupts
-    // Serial.println("Setting up PMU interrupts");
-    pinMode(PIN_PMU_IRQ, INPUT_PULLUP);
-    attachInterrupt(PIN_PMU_IRQ, setPMUIntFlag, FALLING);
-
-    // Reset and re-enable PMU interrupts
-    // Serial.println("Re-enable interrupts");
-    PMU->disableIRQ(XPOWERS_AXP2101_ALL_IRQ);
-    PMU->clearIrqStatus();
-    PMU->enableIRQ(
-        XPOWERS_AXP2101_BAT_INSERT_IRQ | XPOWERS_AXP2101_BAT_REMOVE_IRQ |    // Battery interrupts
-        XPOWERS_AXP2101_VBUS_INSERT_IRQ | XPOWERS_AXP2101_VBUS_REMOVE_IRQ |  // VBUS interrupts
-        XPOWERS_AXP2101_PKEY_SHORT_IRQ | XPOWERS_AXP2101_PKEY_LONG_IRQ |     // Power Key interrupts
-        XPOWERS_AXP2101_BAT_CHG_DONE_IRQ | XPOWERS_AXP2101_BAT_CHG_START_IRQ // Charging interrupts
-    );
-  }
-
-  return true;
-}
-
-bool radio_init() {
-  fallback_clock.begin();
-  rtc_clock.begin(Wire);
-
-#if defined(P_LORA_SCLK)
-  spi.begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI);
-  return radio.std_init(&spi);
-#else
-  return radio.std_init();
-#endif
-}
-
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-}
-
-void radio_set_tx_power(uint8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
-mesh::LocalIdentity radio_new_identity() {
-  RadioNoiseListener rng(radio);
-  return mesh::LocalIdentity(&rng);  // create new random identity
-}
-
-#ifdef MESH_DEBUG
-void TBeamBoard::printPMU() {
-  Serial.print("isCharging:"); Serial.println(PMU->isCharging() ? "YES" : "NO");
-  Serial.print("isDischarge:"); Serial.println(PMU->isDischarge() ? "YES" : "NO");
-  Serial.print("isVbusIn:"); Serial.println(PMU->isVbusIn() ? "YES" : "NO");
-  Serial.print("getBattVoltage:"); Serial.print(PMU->getBattVoltage()); Serial.println("mV");
-  Serial.print("getVbusVoltage:"); Serial.print(PMU->getVbusVoltage()); Serial.println("mV");
-  Serial.print("getSystemVoltage:"); Serial.print(PMU->getSystemVoltage()); Serial.println("mV");
-
-  // The battery percentage may be inaccurate at first use, the PMU will automatically
-  // learn the battery curve and will automatically calibrate the battery percentage
-  // after a charge and discharge cycle
-  if (PMU->isBatteryConnect()) {
-    Serial.print("getBatteryPercent:"); Serial.print(PMU->getBatteryPercent()); Serial.println("%");
-  }
-
-  Serial.println();
-}
-#endif