docs: add board comparison guide for MQTT and companion builds
Этот коммит содержится в:
Jared Dohrman
@@ -0,0 +1,87 @@
|
||||
# Board Comparison
|
||||
|
||||
The tables below are built from the repo's PlatformIO board metadata and variant build flags. `RAM` is the MCU's on-chip RAM where it is known from the MCU family. `PSRAM` is only shown when the repo declares it explicitly or enables it in board metadata. If the board enables PSRAM but the repo does not declare a size, it is marked as `Yes (size not declared)`.
|
||||
|
||||
## Quick Guidance
|
||||
|
||||
- Pick an `ESP32-S3` board with `16MB` flash and PSRAM if you want the most headroom for MQTT plus UI: `heltec_v4_tft`, `heltec_v4`, `Station_G2`, `T_Beam_S3_Supreme_SX1262`.
|
||||
- Pick a TFT board if this will be used as a human-facing companion or field node: `heltec_v4_tft`, `heltec_tracker_v2`, `LilyGo_TDeck`, `Heltec_T190`.
|
||||
- Pick e-paper if you want a status screen with lower idle draw and less frequent refresh: `Heltec_E213`, `Heltec_E290`, `Heltec_Wireless_Paper`, `ThinkNode_M5`.
|
||||
- Pick a headless board if this is mainly a fixed MQTT gateway and screen space is not useful: `Xiao_C3`, `RAK_3112`, `Tenstar_C3`, `Heltec_ct62`, `Generic_E22`.
|
||||
- Pick a GPS-capable board if location-aware/mobile use matters: the T-Beam family, `heltec_tracker_v2`, `Heltec_v3`, `heltec_v4`, `Station_G2`, `ThinkNode_M5`.
|
||||
- If you want the most conservative, older radio family choices, the `SX1276` boards are `LilyGo_TLora_V2_1_1_6`, `Tbeam_SX1276`, and `Heltec_v2`.
|
||||
|
||||
## `repeater_mqtt` Boards
|
||||
|
||||
Rows with a trailing `_` in the env name are still included because they exist in `variants/eastmesh_mqtt/platformio.ini`, but they look more experimental than the main EastMesh targets listed in [local-builds.md](./local-builds.md).
|
||||
|
||||
| Env | CPU | RAM | PSRAM | Flash | LoRa | Display | GPS | Web UI | Notes |
|
||||
| -------------------------------------- | ----------------- | ------ | ----------------------- | ----- | ------ | --------------- | --- | ------ | --------------------------------------- |
|
||||
| T_Beam_S3_Supreme_SX1262_repeater_mqtt | ESP32S3 / 240 MHz | 512 KB | 8 MB | 8MB | SX1262 | OLED (SH1106) | Yes | Yes | GPS, more memory headroom |
|
||||
| LilyGo_TLora_V2_1_1_6_repeater_mqtt | ESP32 / 240 MHz | 520 KB | No | 4 MB | SX1276 | OLED (SSD1306) | Yes | Yes | GPS |
|
||||
| LilyGo_TBeam_1W_repeater_mqtt | ESP32S3 / 240 MHz | 512 KB | Yes (size not declared) | 16MB | SX1262 | OLED (SH1106) | Yes | Yes | GPS, more memory headroom |
|
||||
| Xiao_C3_repeater_mqtt | ESP32C3 / 160 MHz | 400 KB | No | 4 MB | SX1262 | None | Yes | No | headless, GPS, web panel off |
|
||||
| Ebyte_EoRa-S3_Repeater_mqtt | ESP32S3 / 240 MHz | 512 KB | Yes (size not declared) | 4MB | SX1262 | OLED (SSD1306) | No | Yes | more memory headroom |
|
||||
| RAK_3112_repeater_mqtt | ESP32S3 / 240 MHz | 512 KB | No | 8 MB | SX1262 | None | Yes | Yes | headless, GPS |
|
||||
| Tbeam_SX1262_repeater_mqtt | ESP32 / 240 MHz | 520 KB | No | 4 MB | SX1262 | OLED (SSD1306) | Yes | Yes | GPS |
|
||||
| Heltec_E290_repeater_mqtt | ESP32S3 / 240 MHz | 512 KB | 8 MB | 16MB | SX1262 | E-paper (2.9") | No | Yes | low-power display, more memory headroom |
|
||||
| Tbeam_SX1276_repeater_mqtt | ESP32 / 240 MHz | 520 KB | No | 4 MB | SX1276 | OLED (SSD1306) | Yes | Yes | GPS |
|
||||
| Heltec_E213_repeater_mqtt | ESP32S3 / 240 MHz | 512 KB | 8 MB | 16MB | SX1262 | E-paper (2.13") | No | Yes | low-power display, more memory headroom |
|
||||
| Heltec_Wireless_Tracker_repeater_mqtt | ESP32S3 / 240 MHz | 512 KB | No | 8 MB | SX1262 | TFT (ST7735) | Yes | Yes | richer UI, GPS |
|
||||
| M5Stack_Unit_C6L_repeater_mqtt | ESP32C6 / 160 MHz | 512 KB | No | 4 MB | SX1262 | None | Yes | Yes | headless, GPS |
|
||||
| LilyGo_TDeck_repeater_mqtt | ESP32S3 / 240 MHz | 512 KB | No | 16MB | SX1262 | TFT (ST7789) | Yes | Yes | richer UI, GPS |
|
||||
| Station_G2_repeater_mqtt | ESP32S3 / 240 MHz | 512 KB | Yes (size not declared) | 16MB | SX1262 | OLED (SH1106) | Yes | Yes | GPS, more memory headroom |
|
||||
| Station_G2_logging_repeater_mqtt | ESP32S3 / 240 MHz | 512 KB | Yes (size not declared) | 16MB | SX1262 | OLED (SH1106) | Yes | Yes | GPS, more memory headroom |
|
||||
| LilyGo_T3S3_sx1262_repeater_mqtt | ESP32S3 / 240 MHz | 512 KB | Yes (size not declared) | 4MB | SX1262 | OLED (SSD1306) | No | Yes | more memory headroom |
|
||||
| Meshadventurer_sx1262_repeater_mqtt | ESP32 / 240 MHz | 520 KB | No | 4 MB | SX1262 | OLED (SSD1306) | Yes | Yes | GPS |
|
||||
| Meshadventurer_sx1268_repeater_mqtt | ESP32 / 240 MHz | 520 KB | No | 4 MB | SX1268 | OLED (SSD1306) | Yes | Yes | GPS |
|
||||
| Heltec_Wireless_Paper_repeater_mqtt | ESP32S3 / 240 MHz | 512 KB | No | 8 MB | SX1262 | E-paper (2.13") | No | Yes | low-power display |
|
||||
| heltec_v4_repeater_mqtt | ESP32S3 / 240 MHz | 512 KB | 2 MB | 16MB | SX1262 | OLED (SSD1306) | Yes | Yes | GPS, more memory headroom |
|
||||
| heltec_v4_tft_repeater_mqtt | ESP32S3 / 240 MHz | 512 KB | 2 MB | 16MB | SX1262 | TFT (ST7789) | Yes | Yes | richer UI, GPS, more memory headroom |
|
||||
| heltec_tracker_v2_repeater_mqtt | ESP32S3 / 240 MHz | 512 KB | No | 8MB | SX1262 | TFT (ST7735) | Yes | Yes | richer UI, GPS |
|
||||
| Heltec_v3_repeater_mqtt | ESP32S3 / 240 MHz | 512 KB | No | 8 MB | SX1262 | OLED (SSD1306) | Yes | Yes | GPS |
|
||||
| Heltec_WSL3_repeater_mqtt | ESP32S3 / 240 MHz | 512 KB | No | 8 MB | SX1262 | None | Yes | Yes | headless, GPS |
|
||||
| LilyGo_T3S3_sx1276_repeater_mqtt | ESP32S3 / 240 MHz | 512 KB | Yes (size not declared) | 4MB | SX1276 | OLED (SSD1306) | No | Yes | more memory headroom |
|
||||
| LilyGo*Tlora_C6_repeater_mqtt* | ESP32C6 / 160 MHz | 512 KB | No | 4 MB | SX1262 | None | No | Yes | headless |
|
||||
| Xiao*C6_repeater_mqtt* | ESP32C6 / 160 MHz | 512 KB | No | 4 MB | SX1262 | None | No | Yes | headless |
|
||||
| Meshimi*repeater_mqtt* | ESP32C6 / 160 MHz | 512 KB | No | 4 MB | SX1262 | None | No | Yes | headless |
|
||||
| WHY2025*badge_repeater_mqtt* | ESP32C6 / 160 MHz | 512 KB | No | 4 MB | SX1262 | None | No | Yes | headless |
|
||||
| Heltec_v2_repeater_mqtt | ESP32 / 240 MHz | 520 KB | No | 8 MB | SX1276 | OLED (SSD1306) | No | Yes | |
|
||||
| nibble_screen_connect_repeater_mqtt | ESP32S3 / 240 MHz | 512 KB | No | 4MB | SX1262 | OLED (SSD1306) | No | Yes | |
|
||||
| ThinkNode_M2_Repeater_mqtt | ESP32S3 / 240 MHz | 512 KB | No | 4MB | SX1262 | OLED (SH1106) | No | Yes | |
|
||||
| ThinkNode_M5_Repeater_mqtt | ESP32S3 / 240 MHz | 512 KB | No | 4MB | SX1262 | E-paper (GxEPD) | Yes | Yes | low-power display, GPS |
|
||||
| Heltec*T190_repeater_mqtt* | ESP32S3 / 240 MHz | 512 KB | 8 MB | 16MB | SX1262 | TFT (ST7789) | No | Yes | richer UI, more memory headroom |
|
||||
| Tenstar_C3_sx1262_repeater_mqtt | ESP32C3 / 160 MHz | 400 KB | No | 4 MB | SX1262 | None | No | Yes | headless |
|
||||
| Tenstar_C3_sx1268_repeater_mqtt | ESP32C3 / 160 MHz | 400 KB | No | 4 MB | SX1268 | None | No | Yes | headless |
|
||||
| Heltec_ct62_repeater_mqtt | ESP32C3 / 160 MHz | 400 KB | No | 4 MB | SX1262 | None | No | Yes | headless |
|
||||
| Xiao_S3_WIO_repeater_mqtt | ESP32S3 / 240 MHz | 512 KB | No | 8 MB | SX1262 | None | Yes | Yes | headless, GPS |
|
||||
| Generic_E22_sx1262_repeater_mqtt | ESP32 / 240 MHz | 520 KB | No | 4 MB | SX1262 | None | No | Yes | headless |
|
||||
| Generic_E22_sx1268_repeater_mqtt | ESP32 / 240 MHz | 520 KB | No | 4 MB | SX1268 | None | No | Yes | headless |
|
||||
|
||||
## `companion_radio_wifi` Boards With A Display
|
||||
|
||||
This table only includes Wi-Fi companion envs that actually have a display configured. Headless Wi-Fi companion envs such as `Xiao_C3_companion_radio_wifi` are intentionally excluded here.
|
||||
|
||||
| Env | CPU | RAM | PSRAM | Flash | LoRa | Display | GPS | Notes |
|
||||
| --------------------------------------------- | ----------------- | ------ | ----------------------- | ----- | ------ | --------------- | --- | ------------------------------------ |
|
||||
| heltec_tracker_v2_companion_radio_wifi | ESP32S3 / 240 MHz | 512 KB | No | 8MB | SX1262 | TFT (ST7735) | Yes | richer UI, GPS |
|
||||
| Heltec_v2_companion_radio_wifi | ESP32 / 240 MHz | 520 KB | No | 8 MB | SX1276 | OLED (SSD1306) | No | |
|
||||
| Heltec_v3_companion_radio_wifi | ESP32S3 / 240 MHz | 512 KB | No | 8 MB | SX1262 | OLED (SSD1306) | Yes | GPS |
|
||||
| heltec_v4_companion_radio_wifi | ESP32S3 / 240 MHz | 512 KB | 2 MB | 16MB | SX1262 | OLED (SSD1306) | Yes | GPS, more memory headroom |
|
||||
| heltec_v4_tft_companion_radio_wifi | ESP32S3 / 240 MHz | 512 KB | 2 MB | 16MB | SX1262 | TFT (ST7789) | Yes | richer UI, GPS, more memory headroom |
|
||||
| LilyGo_TBeam_1W_companion_radio_wifi | ESP32S3 / 240 MHz | 512 KB | Yes (size not declared) | 16MB | SX1262 | OLED (SH1106) | Yes | GPS, more memory headroom |
|
||||
| LilyGo_TLora_V2_1_1_6_companion_radio_wifi | ESP32 / 240 MHz | 520 KB | No | 4 MB | SX1276 | OLED (SSD1306) | Yes | GPS |
|
||||
| nibble_screen_connect_companion_radio_wifi | ESP32S3 / 240 MHz | 512 KB | No | 4MB | SX1262 | OLED (SSD1306) | No | |
|
||||
| Station_G2_companion_radio_wifi | ESP32S3 / 240 MHz | 512 KB | Yes (size not declared) | 16MB | SX1262 | OLED (SH1106) | Yes | GPS, more memory headroom |
|
||||
| T_Beam_S3_Supreme_SX1262_companion_radio_wifi | ESP32S3 / 240 MHz | 512 KB | 8 MB | 8MB | SX1262 | OLED (SH1106) | Yes | GPS, more memory headroom |
|
||||
| ThinkNode_M2_companion_radio_wifi | ESP32S3 / 240 MHz | 512 KB | No | 4MB | SX1262 | OLED (SH1106) | No | |
|
||||
| ThinkNode_M5_companion_radio_wifi | ESP32S3 / 240 MHz | 512 KB | No | 4MB | SX1262 | E-paper (GxEPD) | Yes | low-power display, GPS |
|
||||
|
||||
## Practical Picks
|
||||
|
||||
- Best all-round MQTT repeater with screen and memory headroom: `heltec_v4_repeater_mqtt`, `heltec_v4_tft_repeater_mqtt`, `T_Beam_S3_Supreme_SX1262_repeater_mqtt`, `Station_G2_repeater_mqtt`.
|
||||
- Best MQTT repeater if you want a simple headless install: `RAK_3112_repeater_mqtt`, `Tenstar_C3_sx1262_repeater_mqtt`, `Heltec_ct62_repeater_mqtt`, `Generic_E22_sx1262_repeater_mqtt`.
|
||||
- Best low-power display MQTT builds: `Heltec_E213_repeater_mqtt`, `Heltec_E290_repeater_mqtt`, `Heltec_Wireless_Paper_repeater_mqtt`, `ThinkNode_M5_Repeater_mqtt`.
|
||||
- Best companion choices if you want the richest local UI: `heltec_v4_tft_companion_radio_wifi` and `heltec_tracker_v2_companion_radio_wifi`.
|
||||
- Best companion choices if you want maximum memory headroom: `T_Beam_S3_Supreme_SX1262_companion_radio_wifi`, `heltec_v4_companion_radio_wifi`, `heltec_v4_tft_companion_radio_wifi`, `Station_G2_companion_radio_wifi`.
|
||||
- Best companion choices if you prefer OLED over TFT: `T_Beam_S3_Supreme_SX1262_companion_radio_wifi`, `heltec_v4_companion_radio_wifi`, `LilyGo_TBeam_1W_companion_radio_wifi`.
|
||||
@@ -8,6 +8,7 @@ MeshCore-EastMesh keeps the upstream MeshCore firmware intact and adds an EastMe
|
||||
|
||||
## End User Guides
|
||||
|
||||
- [Compare Boards](./boards.md)
|
||||
- [Download and Flash Releases](./releases.md)
|
||||
- [Migration From xJARiD/MeshCore](./migration.md)
|
||||
- [Use the Repeater Web Panel](./web-panel.md)
|
||||
|
||||
@@ -36,6 +36,7 @@ extra_css:
|
||||
|
||||
nav:
|
||||
- Home: index.md
|
||||
- Boards: boards.md
|
||||
- Releases: releases.md
|
||||
- Migration: migration.md
|
||||
- Web Panel: web-panel.md
|
||||
|
||||
Ссылка в новой задаче
Block a user