From 534a0c97a7f36fe2caffd1ac111e3f38f6d7fdd4 Mon Sep 17 00:00:00 2001 From: overkillfpv Date: Thu, 5 Mar 2026 21:39:14 +1100 Subject: [PATCH 01/54] Increased preamble to 32 for setPreambleLength(16); // overcomes weird issues with small and big pkts + _radio->setPreambleLength(LORA_SF <= 8 ? 32 : 16); // overcomes weird issues with small and big pkts } float getLastRSSI() const override { return ((CustomLR1110 *)_radio)->getRSSI(); } diff --git a/src/helpers/radiolib/RadioLibWrappers.cpp b/src/helpers/radiolib/RadioLibWrappers.cpp index 2216ca8f..9cc7318a 100644 --- a/src/helpers/radiolib/RadioLibWrappers.cpp +++ b/src/helpers/radiolib/RadioLibWrappers.cpp @@ -26,6 +26,7 @@ void setFlag(void) { void RadioLibWrapper::begin() { _radio->setPacketReceivedAction(setFlag); // this is also SentComplete interrupt + _radio->setPreambleLength(LORA_SF <= 8 ? 32 : 16); // longer preamble for lower SF improves reliability state = STATE_IDLE; if (_board->getStartupReason() == BD_STARTUP_RX_PACKET) { // received a LoRa packet (while in deep sleep) From a61add2e6a7633f8035ff40bc9ed03f251959dea Mon Sep 17 00:00:00 2001 From: overkillfpv Date: Thu, 5 Mar 2026 22:14:22 +1100 Subject: [PATCH 02/54] Update preamble dynamically to match runtime SF changes via CLI --- src/helpers/radiolib/CustomLLCC68Wrapper.h | 1 + src/helpers/radiolib/CustomLR1110.h | 2 ++ src/helpers/radiolib/CustomLR1110Wrapper.h | 3 ++- src/helpers/radiolib/CustomSTM32WLxWrapper.h | 1 + src/helpers/radiolib/CustomSX1262Wrapper.h | 1 + src/helpers/radiolib/CustomSX1268Wrapper.h | 1 + src/helpers/radiolib/CustomSX1276Wrapper.h | 1 + src/helpers/radiolib/RadioLibWrappers.cpp | 3 ++- src/helpers/radiolib/RadioLibWrappers.h | 1 + 9 files changed, 12 insertions(+), 2 deletions(-) diff --git a/src/helpers/radiolib/CustomLLCC68Wrapper.h b/src/helpers/radiolib/CustomLLCC68Wrapper.h index 9e783a95..e62acaff 100644 --- a/src/helpers/radiolib/CustomLLCC68Wrapper.h +++ b/src/helpers/radiolib/CustomLLCC68Wrapper.h @@ -20,6 +20,7 @@ public: int sf = ((CustomLLCC68 *)_radio)->spreadingFactor; return packetScoreInt(snr, sf, packet_len); } + uint8_t getSpreadingFactor() const override { return ((CustomLLCC68 *)_radio)->spreadingFactor; } void doResetAGC() override { sx126xResetAGC((SX126x *)_radio); } }; diff --git a/src/helpers/radiolib/CustomLR1110.h b/src/helpers/radiolib/CustomLR1110.h index b1f68080..8cfb0906 100644 --- a/src/helpers/radiolib/CustomLR1110.h +++ b/src/helpers/radiolib/CustomLR1110.h @@ -27,4 +27,6 @@ class CustomLR1110 : public LR1110 { bool detected = ((irq & RADIOLIB_LR11X0_IRQ_SYNC_WORD_HEADER_VALID) || (irq & RADIOLIB_LR11X0_IRQ_PREAMBLE_DETECTED)); return detected; } + + uint8_t getSpreadingFactor() const { return spreadingFactor; } }; \ No newline at end of file diff --git a/src/helpers/radiolib/CustomLR1110Wrapper.h b/src/helpers/radiolib/CustomLR1110Wrapper.h index be3a9f8d..c5b04233 100644 --- a/src/helpers/radiolib/CustomLR1110Wrapper.h +++ b/src/helpers/radiolib/CustomLR1110Wrapper.h @@ -19,10 +19,11 @@ public: void onSendFinished() override { RadioLibWrapper::onSendFinished(); - _radio->setPreambleLength(LORA_SF <= 8 ? 32 : 16); // overcomes weird issues with small and big pkts + _radio->setPreambleLength(getSpreadingFactor() <= 8 ? 32 : 16); // overcomes weird issues with small and big pkts } float getLastRSSI() const override { return ((CustomLR1110 *)_radio)->getRSSI(); } float getLastSNR() const override { return ((CustomLR1110 *)_radio)->getSNR(); } + uint8_t getSpreadingFactor() const override { return ((CustomLR1110 *)_radio)->getSpreadingFactor(); } int16_t setRxBoostedGainMode(bool en) { return ((CustomLR1110 *)_radio)->setRxBoostedGainMode(en); }; }; diff --git a/src/helpers/radiolib/CustomSTM32WLxWrapper.h b/src/helpers/radiolib/CustomSTM32WLxWrapper.h index e3e52029..cccdc043 100644 --- a/src/helpers/radiolib/CustomSTM32WLxWrapper.h +++ b/src/helpers/radiolib/CustomSTM32WLxWrapper.h @@ -21,6 +21,7 @@ public: int sf = ((CustomSTM32WLx *)_radio)->spreadingFactor; return packetScoreInt(snr, sf, packet_len); } + uint8_t getSpreadingFactor() const override { return ((CustomSTM32WLx *)_radio)->spreadingFactor; } void doResetAGC() override { sx126xResetAGC((SX126x *)_radio); } }; diff --git a/src/helpers/radiolib/CustomSX1262Wrapper.h b/src/helpers/radiolib/CustomSX1262Wrapper.h index 5856720b..ad140b66 100644 --- a/src/helpers/radiolib/CustomSX1262Wrapper.h +++ b/src/helpers/radiolib/CustomSX1262Wrapper.h @@ -20,6 +20,7 @@ public: int sf = ((CustomSX1262 *)_radio)->spreadingFactor; return packetScoreInt(snr, sf, packet_len); } + uint8_t getSpreadingFactor() const override { return ((CustomSX1262 *)_radio)->spreadingFactor; } virtual void powerOff() override { ((CustomSX1262 *)_radio)->sleep(false); } diff --git a/src/helpers/radiolib/CustomSX1268Wrapper.h b/src/helpers/radiolib/CustomSX1268Wrapper.h index 5149fc43..0c97752e 100644 --- a/src/helpers/radiolib/CustomSX1268Wrapper.h +++ b/src/helpers/radiolib/CustomSX1268Wrapper.h @@ -20,6 +20,7 @@ public: int sf = ((CustomSX1268 *)_radio)->spreadingFactor; return packetScoreInt(snr, sf, packet_len); } + uint8_t getSpreadingFactor() const override { return ((CustomSX1268 *)_radio)->spreadingFactor; } void doResetAGC() override { sx126xResetAGC((SX126x *)_radio); } }; diff --git a/src/helpers/radiolib/CustomSX1276Wrapper.h b/src/helpers/radiolib/CustomSX1276Wrapper.h index 28257990..fa613c8e 100644 --- a/src/helpers/radiolib/CustomSX1276Wrapper.h +++ b/src/helpers/radiolib/CustomSX1276Wrapper.h @@ -19,4 +19,5 @@ public: int sf = ((CustomSX1276 *)_radio)->spreadingFactor; return packetScoreInt(snr, sf, packet_len); } + uint8_t getSpreadingFactor() const override { return ((CustomSX1276 *)_radio)->spreadingFactor; } }; diff --git a/src/helpers/radiolib/RadioLibWrappers.cpp b/src/helpers/radiolib/RadioLibWrappers.cpp index 9cc7318a..9260e6df 100644 --- a/src/helpers/radiolib/RadioLibWrappers.cpp +++ b/src/helpers/radiolib/RadioLibWrappers.cpp @@ -26,7 +26,7 @@ void setFlag(void) { void RadioLibWrapper::begin() { _radio->setPacketReceivedAction(setFlag); // this is also SentComplete interrupt - _radio->setPreambleLength(LORA_SF <= 8 ? 32 : 16); // longer preamble for lower SF improves reliability + _radio->setPreambleLength(getSpreadingFactor() <= 8 ? 32 : 16); // longer preamble for lower SF improves reliability state = STATE_IDLE; if (_board->getStartupReason() == BD_STARTUP_RX_PACKET) { // received a LoRa packet (while in deep sleep) @@ -143,6 +143,7 @@ uint32_t RadioLibWrapper::getEstAirtimeFor(int len_bytes) { bool RadioLibWrapper::startSendRaw(const uint8_t* bytes, int len) { _board->onBeforeTransmit(); + _radio->setPreambleLength(getSpreadingFactor() <= 8 ? 32 : 16); // keep preamble in sync with current SF int err = _radio->startTransmit((uint8_t *) bytes, len); if (err == RADIOLIB_ERR_NONE) { state = STATE_TX_WAIT; diff --git a/src/helpers/radiolib/RadioLibWrappers.h b/src/helpers/radiolib/RadioLibWrappers.h index b338b03a..c9791a4b 100644 --- a/src/helpers/radiolib/RadioLibWrappers.h +++ b/src/helpers/radiolib/RadioLibWrappers.h @@ -38,6 +38,7 @@ public: } virtual float getCurrentRSSI() =0; + virtual uint8_t getSpreadingFactor() const { return LORA_SF; } int getNoiseFloor() const override { return _noise_floor; } void triggerNoiseFloorCalibrate(int threshold) override; From 6fd8c28522c7c5143d2384a91a2116b4d0738102 Mon Sep 17 00:00:00 2001 From: overkillfpv Date: Sat, 7 Mar 2026 12:48:22 +1100 Subject: [PATCH 03/54] Cache preamble SF to avoid redundant setPreambleLength() on every TX --- src/helpers/radiolib/RadioLibWrappers.cpp | 9 +++++++-- src/helpers/radiolib/RadioLibWrappers.h | 3 ++- 2 files changed, 9 insertions(+), 3 deletions(-) diff --git a/src/helpers/radiolib/RadioLibWrappers.cpp b/src/helpers/radiolib/RadioLibWrappers.cpp index 9260e6df..883cc623 100644 --- a/src/helpers/radiolib/RadioLibWrappers.cpp +++ b/src/helpers/radiolib/RadioLibWrappers.cpp @@ -26,7 +26,8 @@ void setFlag(void) { void RadioLibWrapper::begin() { _radio->setPacketReceivedAction(setFlag); // this is also SentComplete interrupt - _radio->setPreambleLength(getSpreadingFactor() <= 8 ? 32 : 16); // longer preamble for lower SF improves reliability + _preamble_sf = getSpreadingFactor(); + _radio->setPreambleLength(_preamble_sf <= 8 ? 32 : 16); // longer preamble for lower SF improves reliability state = STATE_IDLE; if (_board->getStartupReason() == BD_STARTUP_RX_PACKET) { // received a LoRa packet (while in deep sleep) @@ -143,7 +144,11 @@ uint32_t RadioLibWrapper::getEstAirtimeFor(int len_bytes) { bool RadioLibWrapper::startSendRaw(const uint8_t* bytes, int len) { _board->onBeforeTransmit(); - _radio->setPreambleLength(getSpreadingFactor() <= 8 ? 32 : 16); // keep preamble in sync with current SF + uint8_t sf = getSpreadingFactor(); + if (sf != _preamble_sf) { + _preamble_sf = sf; + _radio->setPreambleLength(sf <= 8 ? 32 : 16); // update preamble when SF has changed + } int err = _radio->startTransmit((uint8_t *) bytes, len); if (err == RADIOLIB_ERR_NONE) { state = STATE_TX_WAIT; diff --git a/src/helpers/radiolib/RadioLibWrappers.h b/src/helpers/radiolib/RadioLibWrappers.h index c9791a4b..0dbc8897 100644 --- a/src/helpers/radiolib/RadioLibWrappers.h +++ b/src/helpers/radiolib/RadioLibWrappers.h @@ -11,6 +11,7 @@ protected: int16_t _noise_floor, _threshold; uint16_t _num_floor_samples; int32_t _floor_sample_sum; + uint8_t _preamble_sf; void idle(); void startRecv(); @@ -19,7 +20,7 @@ protected: virtual void doResetAGC(); public: - RadioLibWrapper(PhysicalLayer& radio, mesh::MainBoard& board) : _radio(&radio), _board(&board) { n_recv = n_sent = 0; } + RadioLibWrapper(PhysicalLayer& radio, mesh::MainBoard& board) : _radio(&radio), _board(&board), _preamble_sf(0) { n_recv = n_sent = 0; } void begin() override; virtual void powerOff() { _radio->sleep(); } From a434f9eff5d5f851edfb4a902155721a9d9ff99f Mon Sep 17 00:00:00 2001 From: overkillfpv Date: Sun, 8 Mar 2026 05:37:49 +1100 Subject: [PATCH 04/54] simplified the calls --- src/helpers/radiolib/CustomLR1110Wrapper.h | 2 +- src/helpers/radiolib/RadioLibWrappers.cpp | 4 ++-- src/helpers/radiolib/RadioLibWrappers.h | 1 + 3 files changed, 4 insertions(+), 3 deletions(-) diff --git a/src/helpers/radiolib/CustomLR1110Wrapper.h b/src/helpers/radiolib/CustomLR1110Wrapper.h index c5b04233..2f2cc24c 100644 --- a/src/helpers/radiolib/CustomLR1110Wrapper.h +++ b/src/helpers/radiolib/CustomLR1110Wrapper.h @@ -19,7 +19,7 @@ public: void onSendFinished() override { RadioLibWrapper::onSendFinished(); - _radio->setPreambleLength(getSpreadingFactor() <= 8 ? 32 : 16); // overcomes weird issues with small and big pkts + _radio->setPreambleLength(preambleLengthForSF(getSpreadingFactor())); // overcomes weird issues with small and big pkts } float getLastRSSI() const override { return ((CustomLR1110 *)_radio)->getRSSI(); } diff --git a/src/helpers/radiolib/RadioLibWrappers.cpp b/src/helpers/radiolib/RadioLibWrappers.cpp index 883cc623..18251e43 100644 --- a/src/helpers/radiolib/RadioLibWrappers.cpp +++ b/src/helpers/radiolib/RadioLibWrappers.cpp @@ -27,7 +27,7 @@ void setFlag(void) { void RadioLibWrapper::begin() { _radio->setPacketReceivedAction(setFlag); // this is also SentComplete interrupt _preamble_sf = getSpreadingFactor(); - _radio->setPreambleLength(_preamble_sf <= 8 ? 32 : 16); // longer preamble for lower SF improves reliability + _radio->setPreambleLength(preambleLengthForSF(_preamble_sf)); // longer preamble for lower SF improves reliability state = STATE_IDLE; if (_board->getStartupReason() == BD_STARTUP_RX_PACKET) { // received a LoRa packet (while in deep sleep) @@ -147,7 +147,7 @@ bool RadioLibWrapper::startSendRaw(const uint8_t* bytes, int len) { uint8_t sf = getSpreadingFactor(); if (sf != _preamble_sf) { _preamble_sf = sf; - _radio->setPreambleLength(sf <= 8 ? 32 : 16); // update preamble when SF has changed + _radio->setPreambleLength(preambleLengthForSF(sf)); // update preamble when SF has changed } int err = _radio->startTransmit((uint8_t *) bytes, len); if (err == RADIOLIB_ERR_NONE) { diff --git a/src/helpers/radiolib/RadioLibWrappers.h b/src/helpers/radiolib/RadioLibWrappers.h index 0dbc8897..8e266dee 100644 --- a/src/helpers/radiolib/RadioLibWrappers.h +++ b/src/helpers/radiolib/RadioLibWrappers.h @@ -40,6 +40,7 @@ public: virtual float getCurrentRSSI() =0; virtual uint8_t getSpreadingFactor() const { return LORA_SF; } + static uint16_t preambleLengthForSF(uint8_t sf) { return sf <= 8 ? 32 : 16; } int getNoiseFloor() const override { return _noise_floor; } void triggerNoiseFloorCalibrate(int threshold) override; From 2f6046d7ba017c1cff78bae45549a1abd7ddf656 Mon Sep 17 00:00:00 2001 From: liamcottle Date: Tue, 24 Mar 2026 15:38:15 +1300 Subject: [PATCH 05/54] update docs cname --- .github/workflows/github-pages.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/.github/workflows/github-pages.yml b/.github/workflows/github-pages.yml index d50a044c..5fd2734b 100644 --- a/.github/workflows/github-pages.yml +++ b/.github/workflows/github-pages.yml @@ -31,6 +31,6 @@ jobs: uses: peaceiris/actions-gh-pages@v3 with: github_token: ${{ secrets.GITHUB_TOKEN }} - cname: docs.meshcore.nz + cname: docs.meshcore.io publish_dir: ./site publish_branch: 'gh-pages' From 3843c00f54ba1d977accc7b037bb409296238833 Mon Sep 17 00:00:00 2001 From: overkillfpv Date: Tue, 24 Mar 2026 15:05:15 +1100 Subject: [PATCH 06/54] added the preamble update into get est airtime as a prevention for false airtime calcs. Left update in the startsendraw as a safety, but should not be used under normal circumstances --- src/helpers/radiolib/RadioLibWrappers.cpp | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/src/helpers/radiolib/RadioLibWrappers.cpp b/src/helpers/radiolib/RadioLibWrappers.cpp index 18251e43..cc1dc001 100644 --- a/src/helpers/radiolib/RadioLibWrappers.cpp +++ b/src/helpers/radiolib/RadioLibWrappers.cpp @@ -139,6 +139,11 @@ int RadioLibWrapper::recvRaw(uint8_t* bytes, int sz) { } uint32_t RadioLibWrapper::getEstAirtimeFor(int len_bytes) { + uint8_t sf = getSpreadingFactor(); + if (sf != _preamble_sf) { + _preamble_sf = sf; + _radio->setPreambleLength(preambleLengthForSF(sf)); // sync preamble before airtime estimate + } return _radio->getTimeOnAir(len_bytes) / 1000; } From aad1cf81da662cd164ee9bd79fa7a2c419f1a50f Mon Sep 17 00:00:00 2001 From: uncle lit <43320854+LitBomb@users.noreply.github.com> Date: Fri, 27 Mar 2026 11:39:29 -0700 Subject: [PATCH 07/54] add multibyte FAQ, reference awesome-meshcore community projects, minor changes - Add multi byte FAQ - Reword amped radio output setting numbers - Clarify repeater ID collision including distance, supercede https://github.com/meshcore-dev/MeshCore/pull/1478 - Reference awesome meshcore for community projects. Supercede https://github.com/meshcore-dev/MeshCore/pull/1893 --- docs/faq.md | 339 +++++++++++++++++++++++----------------------------- 1 file changed, 148 insertions(+), 191 deletions(-) diff --git a/docs/faq.md b/docs/faq.md index 530f9701..4df2dcc5 100644 --- a/docs/faq.md +++ b/docs/faq.md @@ -2,101 +2,86 @@ A list of frequently-asked questions and answers for MeshCore -- [1. Introduction](#1-introduction) - - [1.1. Q: What is MeshCore?](#11-q-what-is-meshcore) - - [1.2. Q: What do you need to start using MeshCore?](#12-q-what-do-you-need-to-start-using-meshcore) - - [1.2.1. Hardware](#121-hardware) - - [1.2.2. Firmware](#122-firmware) - - [1.2.3. Companion Radio Firmware](#123-companion-radio-firmware) - - [1.2.4. Repeater](#124-repeater) - - [1.2.5. Room Server](#125-room-server) -- [2. Initial Setup](#2-initial-setup) - - [2.1. Q: How many devices do I need to start using MeshCore?](#21-q-how-many-devices-do-i-need-to-start-using-meshcore) - - [2.2. Q: Does MeshCore cost any money?](#22-q-does-meshcore-cost-any-money) - - [2.3. Q: What frequencies are supported by MeshCore?](#23-q-what-frequencies-are-supported-by-meshcore) - - [2.4. Q: What is an "advert" in MeshCore?](#24-q-what-is-an-advert-in-meshcore) - - [2.5. Q: Is there a hop limit?](#25-q-is-there-a-hop-limit) -- [3. Server Administration](#3-server-administration) - - [3.1. Q: How do you configure a repeater or a room server?](#31-q-how-do-you-configure-a-repeater-or-a-room-server) - - [3.2. Q: Do I need to set the location for a repeater?](#32-q-do-i-need-to-set-the-location-for-a-repeater) - - [3.3. Q: What is the password to administer a repeater or a room server?](#33-q-what-is-the-password-to-administer-a-repeater-or-a-room-server) - - [3.4. Q: What is the password to join a room server?](#34-q-what-is-the-password-to-join-a-room-server) - - [3.5. Q: Can I retrieve a repeater's private key or set a repeater's private key?](#35-q-can-i-retrieve-a-repeaters-private-key-or-set-a-repeaters-private-key) - - [3.6. Q: The first byte of my repeater's public key collides with an exisitng repeater on the mesh. How do I get a new private key with a matching public key that has its first byte of my choosing?](#36-q-the-first-byte-of-my-repeaters-public-key-collides-with-an-exisitng-repeater-on-the-mesh--how-do-i-get-a-new-private-key-with-a-matching-public-key-that-has-its-first-byte-of-my-choosing) - - [3.7. Q: My repeater maybe suffering from deafness due to high power interference near my mesh's frequency, it is not hearing other in-range MeshCore radios. What can I do?](#37-q-my-repeater-maybe-suffering-from-deafness-due-to-high-power-interference-near-my-meshs-frequency-it-is-not-hearing-other-in-range-meshcore-radios--what-can-i-do) - - [3.8. Q: How do I make my repeater an observer on the mesh?](#38-q-how-do-i-make-my-repeater-an-observer-on-the-mesh) -- [4. T-Deck Related](#4-t-deck-related) - - [4.1. Q: Is there a user guide for T-Deck, T-Pager, T-Watch, or T-Display Pro?](#41-q-is-there-a-user-guide-for-t-deck-t-pager-t-watch-or-t-display-pro) - - [4.2. Q: What are the steps to get a T-Deck into DFU (Device Firmware Update) mode?](#42-q-what-are-the-steps-to-get-a-t-deck-into-dfu-device-firmware-update-mode) - - [4.3. Q: Why is my T-Deck Plus not getting any satellite lock?](#43-q-why-is-my-t-deck-plus-not-getting-any-satellite-lock) - - [4.4. Q: Why is my OG (non-Plus) T-Deck not getting any satellite lock?](#44-q-why-is-my-og-non-plus-t-deck-not-getting-any-satellite-lock) - - [4.5. Q: What size of SD card does the T-Deck support?](#45-q-what-size-of-sd-card-does-the-t-deck-support) - - [4.6. Q: what is the public key for the default public channel?](#46-q-what-is-the-public-key-for-the-default-public-channel) - - [4.7. Q: How do I get maps on T-Deck?](#47-q-how-do-i-get-maps-on-t-deck) - - [4.8. Q: Where do the map tiles go?](#48-q-where-do-the-map-tiles-go) - - [4.9. Q: How to unlock deeper map zoom and server management features on T-Deck?](#49-q-how-to-unlock-deeper-map-zoom-and-server-management-features-on-t-deck) - - [4.10. Q: How to decipher the diagnostics screen on T-Deck?](#410-q-how-to-decipher-the-diagnostics-screen-on-t-deck) - - [4.11. Q: The T-Deck sound is too loud?](#411-q-the-t-deck-sound-is-too-loud) - - [4.12. Q: Can you customize the sound?](#412-q-can-you-customize-the-sound) - - [4.13. Q: What is the 'Import from Clipboard' feature on the t-deck and is there a way to manually add nodes without having to receive adverts?](#413-q-what-is-the-import-from-clipboard-feature-on-the-t-deck-and-is-there-a-way-to-manually-add-nodes-without-having-to-receive-adverts) - - [4.14. Q: How to capture a screenshot on T-Deck?](#414-q-how-to-capture-a-screenshot-on-t-deck) -- [5. General](#5-general) - - [5.1. Q: What are BW, SF, and CR?](#51-q-what-are-bw-sf-and-cr) - - [5.2. Q: Do MeshCore clients repeat?](#52-q-do-meshcore-clients-repeat) - - [5.3. Q: What happens when a node learns a route via a mobile repeater, and that repeater is gone?](#53-q-what-happens-when-a-node-learns-a-route-via-a-mobile-repeater-and-that-repeater-is-gone) - - [5.4. Q: How does a node discovery a path to its destination and then use it to send messages in the future, instead of flooding every message it sends like Meshtastic?](#54-q-how-does-a-node-discovery-a-path-to-its-destination-and-then-use-it-to-send-messages-in-the-future-instead-of-flooding-every-message-it-sends-like-meshtastic) - - [5.5. Q: Do public channels always flood? Do private channels always flood?](#55-q-do-public-channels-always-flood-do-private-channels-always-flood) - - [5.6. Q: what is the public key for the default public channel?](#56-q-what-is-the-public-key-for-the-default-public-channel) - - [5.7. Q: Is MeshCore open source?](#57-q-is-meshcore-open-source) - - [5.8. Q: How can I support MeshCore?](#58-q-how-can-i-support-meshcore) - - [5.9. Q: How do I build MeshCore firmware from source?](#59-q-how-do-i-build-meshcore-firmware-from-source) - - [5.10. Q: Are there other MeshCore related open source projects?](#510-q-are-there-other-meshcore-related-open-source-projects) - - [5.11. Q: Does MeshCore support ATAK](#511-q-does-meshcore-support-atak) - - [5.12. Q: How do I add a node to the MeshCore Map](#512-q-how-do-i-add-a-node-to-the-meshcore-map) - - [5.13. Q: Can I use a Raspberry Pi to update a MeshCore radio?](#513-q-can-i-use-a-raspberry-pi-to-update-a-meshcore-radio) - - [5.14. Q: Are there are projects built around MeshCore?](#514-q-are-there-are-projects-built-around-meshcore) - - [5.14.1. overview](#5141-overview) - - [5.14.1.1. awesome-meshcore](#51411-awesome-meshcore) - - [5.14.2. programming libraries, command line software](#5142-programming-libraries-command-line-software) - - [5.14.2.1. meshcoremqtt](#51421-meshcoremqtt) - - [5.14.2.2. MeshCore for Home Assistant](#51422-meshcore-for-home-assistant) - - [5.14.2.3. Python MeshCore](#51423-python-meshcore) - - [5.14.2.4. meshcore-cli](#51424-meshcore-cli) - - [5.14.2.5. meshcore.js](#51425-meshcorejs) - - [5.14.2.6. pyMC\_core](#51426-pymc_core) - - [5.14.2.7. MeshCore Packet Decoder](#51427-meshcore-packet-decoder) - - [5.14.2.8. meshcore-pi](#51428-meshcore-pi) - - [5.14.2.9. pyMC\_Repeater](#51429-pymc_repeater) - - [5.14.2.10. MeshCore map auto uploader](#514210-MeshCore-map-auto-uploader) - - [5.14.3. apps, graphical software](#5143-apps-graphical-software) - - [5.14.3.1. meshcore-open](#51431-meshcore-open) - - [5.14.4. firmwares](#5144-firmwares) - - [5.14.4.1. MeshCore-Cardputer-ADV](#51441-MeshCore-Cardputer-ADV) - - [5.14.4.2. LunarCore](#51442-LunarCore) - - [5.14.4.3. MC-Term](#51443-MC-Term) - - [5.14.4.4. Meck](#51444-Meck) - - [5.14.4.5. Meshcore for Wio Tracker L1 Pro](#51445-Meshcore-for-Wio-Tracker-L1-Pro) - - [5.14.5. online services](#5145-online-services) - - [5.15. Q: Are there client applications for Windows or Mac?](#515-q-are-there-client-applications-for-windows-or-mac) - - [5.16. Q: Are there any resources that compare MeshCore to other LoRa systems?](#516-q-are-there-any-resources-that-compare-meshcore-to-other-lora-systems) -- [6. Troubleshooting](#6-troubleshooting) - - [6.1. Q: My client says another client or a repeater or a room server was last seen many, many days ago.](#61-q-my-client-says-another-client-or-a-repeater-or-a-room-server-was-last-seen-many-many-days-ago) - - [6.2. Q: A repeater or a client or a room server I expect to see on my discover list (on T-Deck) or contact list (on a smart device client) are not listed.](#62-q-a-repeater-or-a-client-or-a-room-server-i-expect-to-see-on-my-discover-list-on-t-deck-or-contact-list-on-a-smart-device-client-are-not-listed) - - [6.3. Q: How to connect to a repeater via BLE (Bluetooth)?](#63-q-how-to-connect-to-a-repeater-via-ble-bluetooth) - - [6.4. Q: My companion isn't showing up over Bluetooth?](#64-q-my-companion-isnt-showing-up-over-bluetooth) - - [6.5. Q: I can't connect via Bluetooth, what is the Bluetooth pairing code?](#65-q-i-cant-connect-via-bluetooth-what-is-the-bluetooth-pairing-code) - - [6.6. Q: My Heltec V3 keeps disconnecting from my smartphone. It can't hold a solid Bluetooth connection.](#66-q-my-heltec-v3-keeps-disconnecting-from-my-smartphone--it-cant-hold-a-solid-bluetooth-connection) - - [6.7. Q: My RAK/T1000-E/xiao\_nRF52 device seems to be corrupted, how do I wipe it clean to start fresh?](#67-q-my-rakt1000-exiao_nrf52-device-seems-to-be-corrupted-how-do-i-wipe-it-clean-to-start-fresh) - - [6.8. Q: WebFlasher fails on Linux with failed to open](#68-q-webflasher-fails-on-linux-with-failed-to-open) -- [7. Other Questions:](#7-other-questions) - - [7.1. Q: How to update nRF (RAK, T114, Seed XIAO) repeater and room server firmware over the air using the new simpler DFU app?](#71-q-how-to-update-nrf-rak-t114-seed-xiao-repeater-and-room-server-firmware-over-the-air-using-the-new-simpler-dfu-app) - - [7.1.1 Q: Can I update Seeed Studio Wio Tracker L1 Pro using OTA?](#711-q-can-i-update-seeed-studio-wio-tracker-l1-pro-using-ota) - - [7.2. Q: How to update ESP32-based devices over the air?](#72-q-how-to-update-esp32-based-devices-over-the-air) - - [7.3. Q: Is there a way to lower the chance of a failed OTA device firmware update (DFU)?](#73-q-is-there-a-way-to-lower-the-chance-of-a-failed-ota-device-firmware-update-dfu) - - [7.4. Q: are the MeshCore logo and font available?](#74-q-are-the-meshcore-logo-and-font-available) - - [7.5. Q: What is the format of a contact or channel QR code?](#75-q-what-is-the-format-of-a-contact-or-channel-qr-code) - - [7.6. Q: How do I connect to the companion via WIFI, e.g. using a heltec v3?](#76-q-how-do-i-connect-to-the-companion-via-wifi-eg-using-a-heltec-v3) - - [7.7. Q: I have a Station G2, or a Heltec V4, or an Ikoka Stick, or a radio with a EByte E22-900M30S or a E22-900M33S module, what should their transmit power be set to?](#77-q-i-have-a-station-g2-or-a-heltec-v4-or-an-ikoka-stick-or-a-radio-with-a-ebyte-e22-900m30s-or-a-e22-900m33s-module-what-should-their-transmit-power-be-set-to) +- [Frequently Asked Questions](#frequently-asked-questions) + - [1. Introduction](#1-introduction) + - [1.1. Q: What is MeshCore?](#11-q-what-is-meshcore) + - [1.2. Q: What do you need to start using MeshCore?](#12-q-what-do-you-need-to-start-using-meshcore) + - [1.2.1. Hardware](#121-hardware) + - [1.2.2. Firmware](#122-firmware) + - [1.2.3. Companion Radio Firmware](#123-companion-radio-firmware) + - [1.2.4. Repeater](#124-repeater) + - [1.2.5. Room Server](#125-room-server) + - [2. Initial Setup](#2-initial-setup) + - [2.1. Q: How many devices do I need to start using MeshCore?](#21-q-how-many-devices-do-i-need-to-start-using-meshcore) + - [2.2. Q: Does MeshCore cost any money?](#22-q-does-meshcore-cost-any-money) + - [2.3. Q: What frequencies are supported by MeshCore?](#23-q-what-frequencies-are-supported-by-meshcore) + - [2.4. Q: What is an "advert" in MeshCore?](#24-q-what-is-an-advert-in-meshcore) + - [2.5. Q: Is there a hop limit?](#25-q-is-there-a-hop-limit) + - [3. Server Administration](#3-server-administration) + - [3.1. Q: How do you configure a repeater or a room server?](#31-q-how-do-you-configure-a-repeater-or-a-room-server) + - [3.2. Q: Do I need to set the location for a repeater?](#32-q-do-i-need-to-set-the-location-for-a-repeater) + - [3.3. Q: What is the password to administer a repeater or a room server?](#33-q-what-is-the-password-to-administer-a-repeater-or-a-room-server) + - [3.4. Q: What is the password to join a room server?](#34-q-what-is-the-password-to-join-a-room-server) + - [3.5. Q: Can I retrieve a repeater's private key or set a repeater's private key?](#35-q-can-i-retrieve-a-repeaters-private-key-or-set-a-repeaters-private-key) + - [3.6. Q: The first byte of my repeater's public key collides with an exisitng repeater on the mesh. How do I get a new private key with a matching public key that has its first byte of my choosing?](#36-q-the-first-byte-of-my-repeaters-public-key-collides-with-an-exisitng-repeater-on-the-mesh--how-do-i-get-a-new-private-key-with-a-matching-public-key-that-has-its-first-byte-of-my-choosing) + - [3.7. Q: My repeater maybe suffering from deafness due to high power interference near my mesh's frequency, it is not hearing other in-range MeshCore radios. What can I do?](#37-q-my-repeater-maybe-suffering-from-deafness-due-to-high-power-interference-near-my-meshs-frequency-it-is-not-hearing-other-in-range-meshcore-radios--what-can-i-do) + - [3.8. Q: How do I make my repeater an observer on the mesh?](#38-q-how-do-i-make-my-repeater-an-observer-on-the-mesh) + - [3.9. Q: What is multi-byte support? What do 1-byte, 2-byte, 3-byte adverts and messages mean?](#39-q-what-is-multi-byte-support--what-do-1-byte-2-byte-3-byte-adverts-and-messages-mean) + - [3.9.1. Q: **What path hash sizes will my repeater forward?**](#391-q-what-path-hash-sizes-will-my-repeater-forward) + - [3.9.2. Q: **What determines a packet's path hash size?**](#392-q-what-determines-a-packets-path-hash-size) + - [3.9.3. Q: **How do I change my companion's path hash size?**](#393-q-how-do-i-change-my-companions-path-hash-size) + - [3.9.4. Q: **What does `path.hash.mode` on a repeater do?**](#394-q-what-does-pathhashmode-on-a-repeater-do) + - [4. T-Deck Related](#4-t-deck-related) + - [4.1. Q: Is there a user guide for T-Deck, T-Pager, T-Watch, or T-Display Pro?](#41-q-is-there-a-user-guide-for-t-deck-t-pager-t-watch-or-t-display-pro) + - [4.2. Q: What are the steps to get a T-Deck into DFU (Device Firmware Update) mode?](#42-q-what-are-the-steps-to-get-a-t-deck-into-dfu-device-firmware-update-mode) + - [4.3. Q: Why is my T-Deck Plus not getting any satellite lock?](#43-q-why-is-my-t-deck-plus-not-getting-any-satellite-lock) + - [4.4. Q: Why is my OG (non-Plus) T-Deck not getting any satellite lock?](#44-q-why-is-my-og-non-plus-t-deck-not-getting-any-satellite-lock) + - [4.5. Q: What size of SD card does the T-Deck support?](#45-q-what-size-of-sd-card-does-the-t-deck-support) + - [4.6. Q: what is the public key for the default public channel?](#46-q-what-is-the-public-key-for-the-default-public-channel) + - [4.7. Q: How do I get maps on T-Deck?](#47-q-how-do-i-get-maps-on-t-deck) + - [4.8. Q: Where do the map tiles go?](#48-q-where-do-the-map-tiles-go) + - [4.9. Q: How to unlock deeper map zoom and server management features on T-Deck?](#49-q-how-to-unlock-deeper-map-zoom-and-server-management-features-on-t-deck) + - [4.10. Q: How to decipher the diagnostics screen on T-Deck?](#410-q-how-to-decipher-the-diagnostics-screen-on-t-deck) + - [4.11. Q: The T-Deck sound is too loud?](#411-q-the-t-deck-sound-is-too-loud) + - [4.12. Q: Can you customize the sound?](#412-q-can-you-customize-the-sound) + - [4.13. Q: What is the 'Import from Clipboard' feature on the t-deck and is there a way to manually add nodes without having to receive adverts?](#413-q-what-is-the-import-from-clipboard-feature-on-the-t-deck-and-is-there-a-way-to-manually-add-nodes-without-having-to-receive-adverts) + - [4.14. Q: How to capture a screenshot on T-Deck?](#414-q-how-to-capture-a-screenshot-on-t-deck) + - [5. General](#5-general) + - [5.1. Q: What are BW, SF, and CR?](#51-q-what-are-bw-sf-and-cr) + - [5.2. Q: Do MeshCore clients repeat?](#52-q-do-meshcore-clients-repeat) + - [5.3. Q: What happens when a node learns a route via a mobile repeater, and that repeater is gone?](#53-q-what-happens-when-a-node-learns-a-route-via-a-mobile-repeater-and-that-repeater-is-gone) + - [5.4. Q: How does a node discovery a path to its destination and then use it to send messages in the future, instead of flooding every message it sends like Meshtastic?](#54-q-how-does-a-node-discovery-a-path-to-its-destination-and-then-use-it-to-send-messages-in-the-future-instead-of-flooding-every-message-it-sends-like-meshtastic) + - [5.5. Q: Do public channels always flood? Do private channels always flood?](#55-q-do-public-channels-always-flood-do-private-channels-always-flood) + - [5.6. Q: what is the public key for the default public channel?](#56-q-what-is-the-public-key-for-the-default-public-channel) + - [5.7. Q: Is MeshCore open source?](#57-q-is-meshcore-open-source) + - [5.8. Q: How can I support MeshCore?](#58-q-how-can-i-support-meshcore) + - [5.9. Q: How do I build MeshCore firmware from source?](#59-q-how-do-i-build-meshcore-firmware-from-source) + - [5.10. Q: Are there other MeshCore related open source projects?](#510-q-are-there-other-meshcore-related-open-source-projects) + - [5.11. Q: Does MeshCore support ATAK](#511-q-does-meshcore-support-atak) + - [5.12. Q: How do I add a node to the MeshCore Map](#512-q-how-do-i-add-a-node-to-the-meshcore-map) + - [5.13. Q: Can I use a Raspberry Pi to update a MeshCore radio?](#513-q-can-i-use-a-raspberry-pi-to-update-a-meshcore-radio) + - [5.14. Q: Are there are projects built around MeshCore?](#514-q-are-there-are-projects-built-around-meshcore) + - [5.15. Q: Are there client applications for Windows or Mac?](#515-q-are-there-client-applications-for-windows-or-mac) + - [5.16. Q: Are there any resources that compare MeshCore to other LoRa systems?](#516-q-are-there-any-resources-that-compare-meshcore-to-other-lora-systems) + - [6. Troubleshooting](#6-troubleshooting) + - [6.1. Q: My client says another client or a repeater or a room server was last seen many, many days ago.](#61-q-my-client-says-another-client-or-a-repeater-or-a-room-server-was-last-seen-many-many-days-ago) + - [6.2. Q: A repeater or a client or a room server I expect to see on my discover list (on T-Deck) or contact list (on a smart device client) are not listed.](#62-q-a-repeater-or-a-client-or-a-room-server-i-expect-to-see-on-my-discover-list-on-t-deck-or-contact-list-on-a-smart-device-client-are-not-listed) + - [6.3. Q: How to connect to a repeater via BLE (Bluetooth)?](#63-q-how-to-connect-to-a-repeater-via-ble-bluetooth) + - [6.4. Q: My companion isn't showing up over Bluetooth?](#64-q-my-companion-isnt-showing-up-over-bluetooth) + - [6.5. Q: I can't connect via Bluetooth, what is the Bluetooth pairing code?](#65-q-i-cant-connect-via-bluetooth-what-is-the-bluetooth-pairing-code) + - [6.6. Q: My Heltec V3 keeps disconnecting from my smartphone. It can't hold a solid Bluetooth connection.](#66-q-my-heltec-v3-keeps-disconnecting-from-my-smartphone--it-cant-hold-a-solid-bluetooth-connection) + - [6.7. Q: My RAK/T1000-E/xiao\_nRF52 device seems to be corrupted, how do I wipe it clean to start fresh?](#67-q-my-rakt1000-exiao_nrf52-device-seems-to-be-corrupted-how-do-i-wipe-it-clean-to-start-fresh) + - [6.8. Q: WebFlasher fails on Linux with failed to open](#68-q-webflasher-fails-on-linux-with-failed-to-open) + - [7. Other Questions:](#7-other-questions) + - [7.1. Q: How to update nRF (RAK, T114, Seed XIAO) repeater and room server firmware over the air using the new simpler DFU app?](#71-q-how-to-update-nrf-rak-t114-seed-xiao-repeater-and-room-server-firmware-over-the-air-using-the-new-simpler-dfu-app) + - [7.1.1 Q: Can I update Seeed Studio Wio Tracker L1 Pro using OTA?](#711-q-can-i-update-seeed-studio-wio-tracker-l1-pro-using-ota) + - [7.2. Q: How to update ESP32-based devices over the air?](#72-q-how-to-update-esp32-based-devices-over-the-air) + - [7.3. Q: Is there a way to lower the chance of a failed OTA device firmware update (DFU)?](#73-q-is-there-a-way-to-lower-the-chance-of-a-failed-ota-device-firmware-update-dfu) + - [7.4. Q: are the MeshCore logo and font available?](#74-q-are-the-meshcore-logo-and-font-available) + - [7.5. Q: What is the format of a contact or channel QR code?](#75-q-what-is-the-format-of-a-contact-or-channel-qr-code) + - [7.6. Q: How do I connect to the companion via WIFI, e.g. using a heltec v3?](#76-q-how-do-i-connect-to-the-companion-via-wifi-eg-using-a-heltec-v3) + - [7.7. Q: I have a Station G2, or a Heltec V4, or an Ikoka Stick, or a radio with a EByte E22-900M30S or a E22-900M33S module, what should their transmit power be set to?](#77-q-i-have-a-station-g2-or-a-heltec-v4-or-an-ikoka-stick-or-a-radio-with-a-ebyte-e22-900m30s-or-a-e22-900m33s-module-what-should-their-transmit-power-be-set-to) + - [⚠️ **WARNING: Set these values at your own risk. Incorrect power settings can permanently damage your radio hardware.**](#️-warning-set-these-values-at-your-own-risk-incorrect-power-settings-can-permanently-damage-your-radio-hardware) ## 1. Introduction @@ -290,6 +275,10 @@ Reboot the repeater after `set prv.key ` command for the new private key to **A:** You can generate a new private key and specific the first byte of its public key here: https://gessaman.com/mc-keygen/ +Having multiple repeaters with the same first byte ID does not negatively affect the mesh or its functionality. Flood and pathed packets will still reach their destinations. First byte ID collision makes traceroute and path analysis harder because these tools don't know exactly which of the two (or more) colliding repeaters is the one in the path. + +Best practice is when you set up a new repeater, choose a public key that is not in use. If it is not possible to find a unique first byte for your repeater's public key, choose one that is unique within about 10 miles (16 km) to minimize collision with nearby repeaters. + ### 3.7. Q: My repeater maybe suffering from deafness due to high power interference near my mesh's frequency, it is not hearing other in-range MeshCore radios. What can I do? @@ -306,6 +295,58 @@ This is a very low cost operation. AGC reset is done by simply setting `state = **A:** The observer instruction is available here: https://analyzer.letsmesh.net/observer/onboard +### 3.9. Q: What is multi-byte support? What do 1-byte, 2-byte, 3-byte adverts and messages mean? + +**A:** + +**Background:** +The orginal MeshCore protocol design uses the first byte of a repeater's public key to denote the repeater in a path. And with 1 byte for each repeater in the path, MeshCore packets can travel as many as 64 hops. + +However, with 1 byte, there are only 254 unique IDs (exclude 00 and FF which are reserved). Many meshes group have multiple repeaters with the same first byte in their public keys. Packets continue to pass through repeaters and the mesh is not harmed in anyway. It does make it harder for tools to analyze paths with duplicated repeater IDs. + +Firmware version 1.14 and newer introduces the ability for repeaters to advert with 1-, 2-, or 3-byte adverts. Companions can also send out channel and direct messages 1-, 2-, or 3-byte path. Adverts and messages sent in 1-byte path is compatible with repeater firmware older or newer than 1.14. They will travel up to 64 hops. 2-byte adverts and messages will travel up to 32 hops. 3-byte adverts and messages will travel up to 21 hops. + +### 3.9.1. Q: **What path hash sizes will my repeater forward?** + +Repeaters running firmware 1.14+ will repeat packets with 1-, 2-, or 3-byte path hash. Repeaters on firmware older than 1.14 will only repeat 1-byte path hash packets and will silently drop 2- and 3-byte packets. + +### 3.9.2. Q: **What determines a packet's path hash size?** + +The original sender. The most common original sender is a companion app. The other common original sender is a repeater, when it broadcasts its advert. + +### 3.9.3. Q: **How do I change my companion's path hash size?** + +As of firmware 1.14, you can set your companion's message path hash size in the Experimental settings section of the app. Until your regional mesh has the vast majority of the repeaters updated to 1.14+ firmware, it is recommended to keep your companion at the default 1-byte because pre-1.14 repeaters will silently drop messages with larger path hashes. + +### 3.9.4. Q: **What does `path.hash.mode` on a repeater do?** + +It *only* controls the path hash size used in that repeater's own advert broadcasts. It does **not** affect which packets the repeater forwards. A 1.14+ repeater will always forward 1-, 2-, and 3-byte packets regardless of this setting. + +You can set it with `set path.hash.mode {0|1|2}`: + +``` +┌────────────────┬───────────────────────┐ +│ path.hash.mode │ Advert path hash size │ +├────────────────┼───────────────────────┤ +│ 0 │ 1 byte (default) │ +├────────────────┼───────────────────────┤ +│ 1 │ 2 bytes │ +├────────────────┼───────────────────────┤ +│ 2 │ 3 bytes │ +└────────────────┴───────────────────────┘ +``` + +It is safe to set your 1.14+ repeaters to mode 1 or 2. + +**Why use 2- or 3-byte path hash for adverts?** + +A longer path hash helps tools like the LetsMesh Analyzer and MeshMapper disambiguate repeaters more reliably. With only 1 byte, the chance of different repeaters have the same first byte in their public key is high, making it harder to tell them apart in network analysis. Since this only affects adverts, there's no downside. 2- and 3-byte adverts don't travel as far, but it is not important for MechCore nodes to hear a repeater's advert that is 21 or 32 hops away. + +**When can we move away from 1-byte path hash?** + +You should move to send 2-byte or 3-byte channel and direct messages when the vast majority of the repeaters in your regional mesh are updated to firmware version 1.14 or newer. Setting your repeater's `path.hash.mode` to 1 (for 2-byte path) or 2 (for 3-byte path) helps the community gauge how many repeaters have updated to 1.14+. Please work with your MeshCore community together to decide when to switch to 2-byte path or 3-byte path for messages. + + --- ## 4. T-Deck Related @@ -618,94 +659,9 @@ From here, reference repeater and room server command line commands on MeshCore ### 5.14. Q: Are there are projects built around MeshCore? -**A:** Yes. Some of them are listed below. +**A:** Yes, there are many. MeshCore's protocol is open source using the MIT license. The MIT license and the open source protocol makes it very easy for the MeshCore community to build new firmware for radios, applications on mobile devices, map tools, and analysis tools, and integration with other projects like Home Asistant. -#### 5.14.1. overview - -Some resources that by themselves give overviews about MeshCore related projects: - -##### 5.14.1.1. awesome-meshcore -A meta website/ git-repository collecting many projects related to MeshCore, grouped by type. See -https://github.com/samuk/awesome-meshcore. - -#### 5.14.2. programming libraries, command line software - -##### 5.14.2.1. meshcoremqtt -A Python script to send meshcore debug and packet capture data to MQTT for analysis. Cisien's version is a fork of Andrew-a-g's and is being used to to collect data for https://map.w0z.is/messages and https://analyzer.letsmesh.net/ -https://github.com/Cisien/meshcoretomqtt -https://github.com/Andrew-a-g/meshcoretomqtt - -##### 5.14.2.2. MeshCore for Home Assistant -A custom Home Assistant integration for MeshCore mesh radio nodes. It allows you to monitor and control MeshCore nodes via USB, BLE, or TCP connections. -https://github.com/awolden/meshcore-ha - -##### 5.14.2.3. Python MeshCore -Bindings to access your MeshCore companion radio nodes in python. -https://github.com/fdlamotte/meshcore_py - -##### 5.14.2.4. meshcore-cli -CLI interface to MeshCore companion radio over BLE, TCP, or serial. Uses Python MeshCore above. - https://github.com/fdlamotte/meshcore-cli - -##### 5.14.2.5. meshcore.js -A JavaScript library for interacting with a MeshCore device running the companion radio firmware -https://github.com/liamcottle/meshcore.js - -##### 5.14.2.6. pyMC_core -pyMC_Core is a Python port of MeshCore, designed for Raspberry Pi and similar hardware, it talks to LoRa modules over SPI. -https://github.com/rightup/pyMC_core - -##### 5.14.2.7. MeshCore Packet Decoder -A TypeScript library for decoding MeshCore mesh networking packets with full cryptographic support. Uses WebAssembly (WASM) for Ed25519 key derivation through the orlp/ed25519 library. It powers the [MeshCore Packet Analyzer](https://analyzer.letsmesh.net/packets). -https://github.com/michaelhart/meshcore-decoder - -##### 5.14.2.8. meshcore-pi -meshcore-pi is another Python port of MeshCore, designed for Raspberry Pi and similar hardware, it talks to LoRa modules over SPI or GPIO. -https://github.com/brianwiddas/meshcore-pi - -##### 5.14.2.9. pyMC_Repeater -pyMC_Repeater is a repeater daemon in Python built on top of the [`pymc_core`](#5146-pymc_core) library. -https://github.com/rightup/pyMC_Repeater - -##### 5.14.2.10. MeshCore map auto uploader -A Node.js software that will upload every repeater or room server to [map.meshcore.dev](https://map.meshcore.dev/) when a connected companion hears new advert. -https://github.com/recrof/map.meshcore.dev-uploader - -#### 5.14.3. apps, graphical software - -##### 5.14.3.1. meshcore-open -Open Source companion app for Android, iOS, GNU/Linux (and maybe other Unixes), Windows, macOS, chromium-based browsers. -https://github.com/zjs81/meshcore-open - -#### 5.14.4. firmwares - -##### 5.14.4.1. MeshCore-Cardputer-ADV -Standalone client firmware for the "[M5Stack Cardputer ADV](https://docs.m5stack.com/en/core/Cardputer-Adv)" with the "[M5Stack Cap LoRa-1262](https://docs.m5stack.com/en/cap/Cap_LoRa-1262)" module. - -There are two variants: - -* https://github.com/Stachugit/MeshCore-Cardputer-ADV, -* https://github.com/sosprz/meshcore-cardputer-adv. - -##### 5.14.4.2. LunarCore -Multi-protocol mesh firmware for ESP32-S3 LoRa devices (MeshCore, Meshtastic, RNode/KISS (Reticulum)). Protocol is auto-detected from the first bytes over serial or BLE. -https://github.com/STCisGOOD/lunarcore - -##### 5.14.4.3. MC-Term -(Soon to be) Open Source companion firmware for [LilyGO T-Deck (Plus)](https://lilygo.cc/en-us/products/t-deck-plus-1) and [Seeed Studio SenseCap Indicator (TFT / D1Pro)](https://www.seeedstudio.com/SenseCAP-Indicator-D1Pro-p-5644.html), that can be used both standalone and together with a companion app. -https://github.com/dabeani/meshcore - -##### 5.14.4.4. Meck -Companion firmware for [LilyGo T-Deck Pro](https://lilygo.cc/products/t-deck-pro) that allows standalone operation and connection to a companion app via Bluetooth Low Energy (BLE). -https://github.com/pelgraine/Meck - -##### 5.14.4.5. Meshcore for Wio Tracker L1 Pro -Companion firmware for [Seeed Studio Wio Tracker L1 Pro](https://www.seeedstudio.com/Wio-Tracker-L1-Pro-p-6454.html) with specific UI adjustments that can be used standalone. -https://github.com/sosprz/Meshcore-Wio-Tracker-L1-Pro - -#### 5.14.5. online services - -*(None yet listed here. See [overview ressources](#5141-overview).)* +As new MeshCore community projects become available on a weekly basis, we have stopped tracking them here in this FAQ. [samuk](https://github.com/samuk) maintains a very exhausive list of MeshCore community project at https://github.com/samuk/awesome-meshcore/blob/main/README.md. samuk accepts PRs and merges them regularly. ### 5.15. Q: Are there client applications for Windows or Mac? @@ -866,17 +822,18 @@ Edit WIFI_SSID and WIFI_PWD in `./variants/heltec_v3/platformio.ini` and then fl For companion radios, you can set these radios' transmit power in the smartphone app. For repeater and room server radios, you can set their transmit power using the command line command `set tx`. You can get their current value using command line comand `get tx` -> ### ⚠️ **WARNING: Set these values at your own risk. Incorrect power settings can permanently damage your radio hardware.** + ### ⚠️ **WARNING: Set these values at your own risk. Incorrect power settings can permanently damage your radio hardware.** | Device / Model | Region / Description | In-App Setting (dBm) | Target Radio Output | Notes | | :--- | :--- | :--- | :--- | :--- | | **Station G2**
[Reference](https://wiki.uniteng.com/en/meshtastic/station-g2) | US915 Max Output | 19 dBm | 36.5 dBm (4.46W) | | -| | US915 Recommended Max | 16 dBm | 35 dBm (3.16W) | 1dB compression point | -| | EU868 Recommended Max | 15 dBm | 34.5 dBm (2.82W) | 1dB compression point | -| | US915 1W Output | 10 dBm | 1W | | -| | EU868 1W Output | 9 dBm | 1W | | -| **Ikoka Stick E22-900M30S** | 1W Model | 19 dBm | 1W | **DO NOT EXCEED** (Risk of burn out) | -| **Ikoka Stick E22-900M33S** | 2W Model | 9 dBm | 2W | **DO NOT EXCEED** (Risk of burn out) | -| **Heltec V4** | Standard Output | 10 dBm | 22 dBm | | -| | High Output | 22 dBm | 28 dBm | | +| | US915 Max at 1dB compression point | 16 dBm | 35 dBm (3.16W) | 1dB compression point | +| | EU868 Max at 1dB compression point | 15 dBm | 34.5 dBm (2.82W) | 1dB compression point | +| | US915 1W Output | 10 dBm | 1W | Refer to your local government's requirements | +| | EU868 1W Output | 9 dBm | 1W |Refer to your local government's requirements | +| **Ikoka Stick E22-900M30S** | 1W Model | 19 dBm | 1W | **DO NOT EXCEED** (Risk of burn out) [data sheet](https://www.cdebyte.com/pdf-down.aspx?id=4216) | +| **Ikoka Stick E22-900M33S** | 2W Model | 9 dBm | 2W | **DO NOT EXCEED** (Risk of burn out) [data sheet](https://www.cdebyte.com/pdf-down.aspx?id=4216) Refer to your local government's requirements | +| **Heltec V4** | Standard Output | 10 dBm | 22 dBm (~0.15W) | | +| | High Output | 22 dBm | 28 dBm (~0.5W to 0.6W) | | + --- From 7268d7d0d3f72bfa289d95e0425dccfbb86258b5 Mon Sep 17 00:00:00 2001 From: Jim Schrempp Date: Fri, 27 Mar 2026 15:51:36 -0700 Subject: [PATCH 08/54] Update RAK 4631 entry in FAQ on new bootloader Removed "see note" from RAK 4631 entry in FAQ. --- docs/faq.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/faq.md b/docs/faq.md index 530f9701..95e74d13 100644 --- a/docs/faq.md +++ b/docs/faq.md @@ -833,7 +833,7 @@ Currently, the following boards are supported: - Seeed Studio Wio Tracker L1 - Seeed Studio XIAO nRF52840 BLE - Seeed Studio XIAO nRF52840 BLE SENSE -- RAK 4631 (See note) +- RAK 4631 - RAK WisMesh Tag (new 28/11/2025) ### 7.4. Q: are the MeshCore logo and font available? From f0ec5d2ae788d3891625b4323117bffa2079d4ba Mon Sep 17 00:00:00 2001 From: overkillfpv Date: Sun, 29 Mar 2026 21:45:16 +1100 Subject: [PATCH 09/54] changed to set the preamble on radio settings change --- src/helpers/radiolib/RadioLibWrappers.cpp | 10 ---------- src/helpers/radiolib/RadioLibWrappers.h | 1 + variants/ebyte_eora_s3/target.cpp | 1 + variants/generic-e22/target.cpp | 1 + variants/heltec_ct62/target.cpp | 1 + variants/heltec_e213/target.cpp | 1 + variants/heltec_e290/target.cpp | 1 + variants/heltec_mesh_solar/target.cpp | 1 + variants/heltec_t114/target.cpp | 1 + variants/heltec_t190/target.cpp | 1 + variants/heltec_tracker/target.cpp | 1 + variants/heltec_tracker_v2/target.cpp | 1 + variants/heltec_v2/target.cpp | 1 + variants/heltec_v3/target.cpp | 1 + variants/heltec_v4/target.cpp | 1 + variants/heltec_wireless_paper/target.cpp | 1 + variants/ikoka_handheld_nrf/target.cpp | 1 + variants/ikoka_nano_nrf/target.cpp | 1 + variants/ikoka_stick_nrf/target.cpp | 1 + variants/keepteen_lt1/target.cpp | 1 + variants/lilygo_t3s3/target.cpp | 1 + variants/lilygo_t3s3_sx1276/target.cpp | 1 + variants/lilygo_tbeam_1w/target.cpp | 1 + variants/lilygo_tbeam_SX1262/target.cpp | 1 + variants/lilygo_tbeam_SX1276/target.cpp | 1 + variants/lilygo_tbeam_supreme_SX1262/target.cpp | 1 + variants/lilygo_tdeck/target.cpp | 1 + variants/lilygo_techo/target.cpp | 1 + variants/lilygo_techo_lite/target.cpp | 1 + variants/lilygo_tlora_c6/target.cpp | 1 + variants/lilygo_tlora_v2_1/target.cpp | 1 + variants/m5stack_unit_c6l/UnitC6LBoard.cpp | 1 + variants/mesh_pocket/target.cpp | 1 + variants/meshadventurer/target.cpp | 1 + variants/meshtiny/target.cpp | 1 + variants/minewsemi_me25ls01/target.cpp | 1 + variants/nano_g2_ultra/target.cpp | 1 + variants/nibble_screen_connect/target.cpp | 1 + variants/promicro/target.cpp | 1 + variants/rak11310/target.cpp | 1 + variants/rak3112/target.cpp | 1 + variants/rak3401/target.cpp | 1 + variants/rak3x72/target.cpp | 1 + variants/rak4631/target.cpp | 1 + variants/rak_wismesh_tag/target.cpp | 1 + variants/rpi_picow/target.cpp | 1 + variants/sensecap_solar/target.cpp | 1 + variants/station_g2/target.cpp | 1 + variants/t1000-e/target.cpp | 1 + variants/tenstar_c3/target.cpp | 1 + variants/thinknode_m1/target.cpp | 1 + variants/thinknode_m2/target.cpp | 1 + variants/thinknode_m3/target.cpp | 1 + variants/thinknode_m5/target.cpp | 1 + variants/thinknode_m6/target.cpp | 1 + variants/tiny_relay/target.cpp | 1 + variants/waveshare_rp2040_lora/target.cpp | 1 + variants/wio-e5-dev/target.cpp | 1 + variants/wio-e5-mini/target.cpp | 1 + variants/wio-tracker-l1/target.cpp | 1 + variants/wio_wm1110/target.cpp | 1 + variants/xiao_c3/target.cpp | 1 + variants/xiao_c6/XiaoC6Board.cpp | 1 + variants/xiao_nrf52/target.cpp | 1 + variants/xiao_rp2040/target.cpp | 1 + variants/xiao_s3_wio/target.cpp | 1 + 66 files changed, 65 insertions(+), 10 deletions(-) diff --git a/src/helpers/radiolib/RadioLibWrappers.cpp b/src/helpers/radiolib/RadioLibWrappers.cpp index cc1dc001..85f3a935 100644 --- a/src/helpers/radiolib/RadioLibWrappers.cpp +++ b/src/helpers/radiolib/RadioLibWrappers.cpp @@ -139,21 +139,11 @@ int RadioLibWrapper::recvRaw(uint8_t* bytes, int sz) { } uint32_t RadioLibWrapper::getEstAirtimeFor(int len_bytes) { - uint8_t sf = getSpreadingFactor(); - if (sf != _preamble_sf) { - _preamble_sf = sf; - _radio->setPreambleLength(preambleLengthForSF(sf)); // sync preamble before airtime estimate - } return _radio->getTimeOnAir(len_bytes) / 1000; } bool RadioLibWrapper::startSendRaw(const uint8_t* bytes, int len) { _board->onBeforeTransmit(); - uint8_t sf = getSpreadingFactor(); - if (sf != _preamble_sf) { - _preamble_sf = sf; - _radio->setPreambleLength(preambleLengthForSF(sf)); // update preamble when SF has changed - } int err = _radio->startTransmit((uint8_t *) bytes, len); if (err == RADIOLIB_ERR_NONE) { state = STATE_TX_WAIT; diff --git a/src/helpers/radiolib/RadioLibWrappers.h b/src/helpers/radiolib/RadioLibWrappers.h index 8e266dee..66c8aa62 100644 --- a/src/helpers/radiolib/RadioLibWrappers.h +++ b/src/helpers/radiolib/RadioLibWrappers.h @@ -41,6 +41,7 @@ public: virtual float getCurrentRSSI() =0; virtual uint8_t getSpreadingFactor() const { return LORA_SF; } static uint16_t preambleLengthForSF(uint8_t sf) { return sf <= 8 ? 32 : 16; } + void updatePreamble(uint8_t sf) { _preamble_sf = sf; _radio->setPreambleLength(preambleLengthForSF(sf)); } int getNoiseFloor() const override { return _noise_floor; } void triggerNoiseFloorCalibrate(int threshold) override; diff --git a/variants/ebyte_eora_s3/target.cpp b/variants/ebyte_eora_s3/target.cpp index 501f560b..9e656cc2 100644 --- a/variants/ebyte_eora_s3/target.cpp +++ b/variants/ebyte_eora_s3/target.cpp @@ -73,6 +73,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/generic-e22/target.cpp b/variants/generic-e22/target.cpp index f76bb979..6ec1915f 100644 --- a/variants/generic-e22/target.cpp +++ b/variants/generic-e22/target.cpp @@ -36,6 +36,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/heltec_ct62/target.cpp b/variants/heltec_ct62/target.cpp index 5cc621a1..fad39a27 100644 --- a/variants/heltec_ct62/target.cpp +++ b/variants/heltec_ct62/target.cpp @@ -25,6 +25,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/heltec_e213/target.cpp b/variants/heltec_e213/target.cpp index c9233431..70b6ee35 100644 --- a/variants/heltec_e213/target.cpp +++ b/variants/heltec_e213/target.cpp @@ -42,6 +42,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/heltec_e290/target.cpp b/variants/heltec_e290/target.cpp index b0c9630c..856ea0af 100644 --- a/variants/heltec_e290/target.cpp +++ b/variants/heltec_e290/target.cpp @@ -42,6 +42,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/heltec_mesh_solar/target.cpp b/variants/heltec_mesh_solar/target.cpp index 9852b68f..776f5813 100644 --- a/variants/heltec_mesh_solar/target.cpp +++ b/variants/heltec_mesh_solar/target.cpp @@ -32,6 +32,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/heltec_t114/target.cpp b/variants/heltec_t114/target.cpp index 6a30a4d1..36587177 100644 --- a/variants/heltec_t114/target.cpp +++ b/variants/heltec_t114/target.cpp @@ -52,6 +52,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/heltec_t190/target.cpp b/variants/heltec_t190/target.cpp index d22f8b8c..c39ca35c 100644 --- a/variants/heltec_t190/target.cpp +++ b/variants/heltec_t190/target.cpp @@ -42,6 +42,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/heltec_tracker/target.cpp b/variants/heltec_tracker/target.cpp index f801bacb..95cd9c9b 100644 --- a/variants/heltec_tracker/target.cpp +++ b/variants/heltec_tracker/target.cpp @@ -46,6 +46,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/heltec_tracker_v2/target.cpp b/variants/heltec_tracker_v2/target.cpp index c2e26b20..11ae4a60 100644 --- a/variants/heltec_tracker_v2/target.cpp +++ b/variants/heltec_tracker_v2/target.cpp @@ -48,6 +48,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/heltec_v2/target.cpp b/variants/heltec_v2/target.cpp index c5a04752..b29f04e4 100644 --- a/variants/heltec_v2/target.cpp +++ b/variants/heltec_v2/target.cpp @@ -41,6 +41,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/heltec_v3/target.cpp b/variants/heltec_v3/target.cpp index cdd2535e..bedd737c 100644 --- a/variants/heltec_v3/target.cpp +++ b/variants/heltec_v3/target.cpp @@ -48,6 +48,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/heltec_v4/target.cpp b/variants/heltec_v4/target.cpp index 54fc05e8..242ad606 100644 --- a/variants/heltec_v4/target.cpp +++ b/variants/heltec_v4/target.cpp @@ -48,6 +48,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/heltec_wireless_paper/target.cpp b/variants/heltec_wireless_paper/target.cpp index 06f548fc..4455435f 100644 --- a/variants/heltec_wireless_paper/target.cpp +++ b/variants/heltec_wireless_paper/target.cpp @@ -41,6 +41,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/ikoka_handheld_nrf/target.cpp b/variants/ikoka_handheld_nrf/target.cpp index 48244e17..5d7e8b3f 100644 --- a/variants/ikoka_handheld_nrf/target.cpp +++ b/variants/ikoka_handheld_nrf/target.cpp @@ -34,6 +34,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/ikoka_nano_nrf/target.cpp b/variants/ikoka_nano_nrf/target.cpp index be20cfb4..ca128f7c 100644 --- a/variants/ikoka_nano_nrf/target.cpp +++ b/variants/ikoka_nano_nrf/target.cpp @@ -32,6 +32,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/ikoka_stick_nrf/target.cpp b/variants/ikoka_stick_nrf/target.cpp index 4f6befc6..6b48be67 100644 --- a/variants/ikoka_stick_nrf/target.cpp +++ b/variants/ikoka_stick_nrf/target.cpp @@ -32,6 +32,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/keepteen_lt1/target.cpp b/variants/keepteen_lt1/target.cpp index e2e183a7..4cc16496 100644 --- a/variants/keepteen_lt1/target.cpp +++ b/variants/keepteen_lt1/target.cpp @@ -38,6 +38,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/lilygo_t3s3/target.cpp b/variants/lilygo_t3s3/target.cpp index 28481188..e3fb363c 100644 --- a/variants/lilygo_t3s3/target.cpp +++ b/variants/lilygo_t3s3/target.cpp @@ -36,6 +36,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/lilygo_t3s3_sx1276/target.cpp b/variants/lilygo_t3s3_sx1276/target.cpp index e7fe07a0..a62724fb 100644 --- a/variants/lilygo_t3s3_sx1276/target.cpp +++ b/variants/lilygo_t3s3_sx1276/target.cpp @@ -42,6 +42,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/lilygo_tbeam_1w/target.cpp b/variants/lilygo_tbeam_1w/target.cpp index 8cb6bdfa..22f98cd9 100644 --- a/variants/lilygo_tbeam_1w/target.cpp +++ b/variants/lilygo_tbeam_1w/target.cpp @@ -52,6 +52,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/lilygo_tbeam_SX1262/target.cpp b/variants/lilygo_tbeam_SX1262/target.cpp index f85049d7..11ceaf74 100644 --- a/variants/lilygo_tbeam_SX1262/target.cpp +++ b/variants/lilygo_tbeam_SX1262/target.cpp @@ -43,6 +43,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/lilygo_tbeam_SX1276/target.cpp b/variants/lilygo_tbeam_SX1276/target.cpp index 5fe82e11..fca380f1 100644 --- a/variants/lilygo_tbeam_SX1276/target.cpp +++ b/variants/lilygo_tbeam_SX1276/target.cpp @@ -48,6 +48,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/lilygo_tbeam_supreme_SX1262/target.cpp b/variants/lilygo_tbeam_supreme_SX1262/target.cpp index 6fec6f58..a47e23c4 100644 --- a/variants/lilygo_tbeam_supreme_SX1262/target.cpp +++ b/variants/lilygo_tbeam_supreme_SX1262/target.cpp @@ -40,6 +40,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/lilygo_tdeck/target.cpp b/variants/lilygo_tdeck/target.cpp index 731ecfd8..0e36206d 100644 --- a/variants/lilygo_tdeck/target.cpp +++ b/variants/lilygo_tdeck/target.cpp @@ -43,6 +43,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/lilygo_techo/target.cpp b/variants/lilygo_techo/target.cpp index 12d222ff..7db5079d 100644 --- a/variants/lilygo_techo/target.cpp +++ b/variants/lilygo_techo/target.cpp @@ -40,6 +40,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/lilygo_techo_lite/target.cpp b/variants/lilygo_techo_lite/target.cpp index 40a94526..b4240dd2 100644 --- a/variants/lilygo_techo_lite/target.cpp +++ b/variants/lilygo_techo_lite/target.cpp @@ -39,6 +39,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/lilygo_tlora_c6/target.cpp b/variants/lilygo_tlora_c6/target.cpp index 3566fbe4..5a1a545d 100644 --- a/variants/lilygo_tlora_c6/target.cpp +++ b/variants/lilygo_tlora_c6/target.cpp @@ -36,6 +36,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/lilygo_tlora_v2_1/target.cpp b/variants/lilygo_tlora_v2_1/target.cpp index ead62e79..3a14abd0 100644 --- a/variants/lilygo_tlora_v2_1/target.cpp +++ b/variants/lilygo_tlora_v2_1/target.cpp @@ -37,6 +37,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/m5stack_unit_c6l/UnitC6LBoard.cpp b/variants/m5stack_unit_c6l/UnitC6LBoard.cpp index 6538ef48..9a71d9a8 100644 --- a/variants/m5stack_unit_c6l/UnitC6LBoard.cpp +++ b/variants/m5stack_unit_c6l/UnitC6LBoard.cpp @@ -37,6 +37,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(uint8_t dbm) { diff --git a/variants/mesh_pocket/target.cpp b/variants/mesh_pocket/target.cpp index 6fabb317..ee01f668 100644 --- a/variants/mesh_pocket/target.cpp +++ b/variants/mesh_pocket/target.cpp @@ -32,6 +32,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/meshadventurer/target.cpp b/variants/meshadventurer/target.cpp index 0edd4403..ddcb29eb 100644 --- a/variants/meshadventurer/target.cpp +++ b/variants/meshadventurer/target.cpp @@ -39,6 +39,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/meshtiny/target.cpp b/variants/meshtiny/target.cpp index 9188db17..ad57feb9 100644 --- a/variants/meshtiny/target.cpp +++ b/variants/meshtiny/target.cpp @@ -35,6 +35,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/minewsemi_me25ls01/target.cpp b/variants/minewsemi_me25ls01/target.cpp index fcec1941..c67663d6 100644 --- a/variants/minewsemi_me25ls01/target.cpp +++ b/variants/minewsemi_me25ls01/target.cpp @@ -86,6 +86,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/nano_g2_ultra/target.cpp b/variants/nano_g2_ultra/target.cpp index aad10c50..b7b77f19 100644 --- a/variants/nano_g2_ultra/target.cpp +++ b/variants/nano_g2_ultra/target.cpp @@ -34,6 +34,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/nibble_screen_connect/target.cpp b/variants/nibble_screen_connect/target.cpp index 6edaaad7..9cebae0d 100644 --- a/variants/nibble_screen_connect/target.cpp +++ b/variants/nibble_screen_connect/target.cpp @@ -36,6 +36,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/promicro/target.cpp b/variants/promicro/target.cpp index 61eab91c..5db29f28 100644 --- a/variants/promicro/target.cpp +++ b/variants/promicro/target.cpp @@ -38,6 +38,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/rak11310/target.cpp b/variants/rak11310/target.cpp index 67432998..f0cb3e61 100644 --- a/variants/rak11310/target.cpp +++ b/variants/rak11310/target.cpp @@ -27,6 +27,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/rak3112/target.cpp b/variants/rak3112/target.cpp index 6cddfce5..61b2201e 100644 --- a/variants/rak3112/target.cpp +++ b/variants/rak3112/target.cpp @@ -48,6 +48,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/rak3401/target.cpp b/variants/rak3401/target.cpp index ec4fc28c..e9ae88df 100644 --- a/variants/rak3401/target.cpp +++ b/variants/rak3401/target.cpp @@ -46,6 +46,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/rak3x72/target.cpp b/variants/rak3x72/target.cpp index 48e7f422..161c0145 100644 --- a/variants/rak3x72/target.cpp +++ b/variants/rak3x72/target.cpp @@ -64,6 +64,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/rak4631/target.cpp b/variants/rak4631/target.cpp index ea6a2bd4..4d6ff30b 100644 --- a/variants/rak4631/target.cpp +++ b/variants/rak4631/target.cpp @@ -46,6 +46,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/rak_wismesh_tag/target.cpp b/variants/rak_wismesh_tag/target.cpp index 9646375e..284aa40e 100644 --- a/variants/rak_wismesh_tag/target.cpp +++ b/variants/rak_wismesh_tag/target.cpp @@ -42,6 +42,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/rpi_picow/target.cpp b/variants/rpi_picow/target.cpp index e3d4bf09..87583553 100644 --- a/variants/rpi_picow/target.cpp +++ b/variants/rpi_picow/target.cpp @@ -27,6 +27,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/sensecap_solar/target.cpp b/variants/sensecap_solar/target.cpp index 2c2ff0dc..8a2bad06 100644 --- a/variants/sensecap_solar/target.cpp +++ b/variants/sensecap_solar/target.cpp @@ -27,6 +27,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/station_g2/target.cpp b/variants/station_g2/target.cpp index 026b25de..dd74ae41 100644 --- a/variants/station_g2/target.cpp +++ b/variants/station_g2/target.cpp @@ -49,6 +49,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/t1000-e/target.cpp b/variants/t1000-e/target.cpp index da8fa48b..bbf453ca 100644 --- a/variants/t1000-e/target.cpp +++ b/variants/t1000-e/target.cpp @@ -83,6 +83,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/tenstar_c3/target.cpp b/variants/tenstar_c3/target.cpp index d4f189b5..2b7aa00c 100644 --- a/variants/tenstar_c3/target.cpp +++ b/variants/tenstar_c3/target.cpp @@ -36,6 +36,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/thinknode_m1/target.cpp b/variants/thinknode_m1/target.cpp index ec2438d4..83c9f7e3 100644 --- a/variants/thinknode_m1/target.cpp +++ b/variants/thinknode_m1/target.cpp @@ -33,6 +33,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/thinknode_m2/target.cpp b/variants/thinknode_m2/target.cpp index e7e36d05..a7b873a6 100644 --- a/variants/thinknode_m2/target.cpp +++ b/variants/thinknode_m2/target.cpp @@ -44,6 +44,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/thinknode_m3/target.cpp b/variants/thinknode_m3/target.cpp index ca2b0aa0..547584ea 100644 --- a/variants/thinknode_m3/target.cpp +++ b/variants/thinknode_m3/target.cpp @@ -87,6 +87,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/thinknode_m5/target.cpp b/variants/thinknode_m5/target.cpp index a7a049ef..f617e0e4 100644 --- a/variants/thinknode_m5/target.cpp +++ b/variants/thinknode_m5/target.cpp @@ -51,6 +51,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/thinknode_m6/target.cpp b/variants/thinknode_m6/target.cpp index 36ca8618..346e9c2d 100644 --- a/variants/thinknode_m6/target.cpp +++ b/variants/thinknode_m6/target.cpp @@ -37,6 +37,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/tiny_relay/target.cpp b/variants/tiny_relay/target.cpp index 313dfaa9..c05f552e 100644 --- a/variants/tiny_relay/target.cpp +++ b/variants/tiny_relay/target.cpp @@ -68,6 +68,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) diff --git a/variants/waveshare_rp2040_lora/target.cpp b/variants/waveshare_rp2040_lora/target.cpp index a9121b0c..9773f9b5 100644 --- a/variants/waveshare_rp2040_lora/target.cpp +++ b/variants/waveshare_rp2040_lora/target.cpp @@ -37,6 +37,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/wio-e5-dev/target.cpp b/variants/wio-e5-dev/target.cpp index 3e59b6ce..8d8069eb 100644 --- a/variants/wio-e5-dev/target.cpp +++ b/variants/wio-e5-dev/target.cpp @@ -61,6 +61,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/wio-e5-mini/target.cpp b/variants/wio-e5-mini/target.cpp index 2e95ad6d..338f398d 100644 --- a/variants/wio-e5-mini/target.cpp +++ b/variants/wio-e5-mini/target.cpp @@ -59,6 +59,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/wio-tracker-l1/target.cpp b/variants/wio-tracker-l1/target.cpp index 4575a76c..40bf61ae 100644 --- a/variants/wio-tracker-l1/target.cpp +++ b/variants/wio-tracker-l1/target.cpp @@ -42,6 +42,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/wio_wm1110/target.cpp b/variants/wio_wm1110/target.cpp index 457d5bda..9be3061c 100644 --- a/variants/wio_wm1110/target.cpp +++ b/variants/wio_wm1110/target.cpp @@ -79,6 +79,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/xiao_c3/target.cpp b/variants/xiao_c3/target.cpp index f8ee3d92..ee0fc049 100644 --- a/variants/xiao_c3/target.cpp +++ b/variants/xiao_c3/target.cpp @@ -44,6 +44,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/xiao_c6/XiaoC6Board.cpp b/variants/xiao_c6/XiaoC6Board.cpp index 5710c4cc..dc62c20e 100644 --- a/variants/xiao_c6/XiaoC6Board.cpp +++ b/variants/xiao_c6/XiaoC6Board.cpp @@ -37,6 +37,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/xiao_nrf52/target.cpp b/variants/xiao_nrf52/target.cpp index a8f4162e..1236b935 100644 --- a/variants/xiao_nrf52/target.cpp +++ b/variants/xiao_nrf52/target.cpp @@ -32,6 +32,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/xiao_rp2040/target.cpp b/variants/xiao_rp2040/target.cpp index 6c9a9143..8a0f6508 100644 --- a/variants/xiao_rp2040/target.cpp +++ b/variants/xiao_rp2040/target.cpp @@ -37,6 +37,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { diff --git a/variants/xiao_s3_wio/target.cpp b/variants/xiao_s3_wio/target.cpp index 50981ab6..82f870a9 100644 --- a/variants/xiao_s3_wio/target.cpp +++ b/variants/xiao_s3_wio/target.cpp @@ -44,6 +44,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { radio.setSpreadingFactor(sf); radio.setBandwidth(bw); radio.setCodingRate(cr); + radio_driver.updatePreamble(sf); } void radio_set_tx_power(int8_t dbm) { From ea6ec53709a7a3defd2490ffa554216630e993e7 Mon Sep 17 00:00:00 2001 From: uncle lit <43320854+LitBomb@users.noreply.github.com> Date: Sun, 29 Mar 2026 16:22:41 -0700 Subject: [PATCH 10/54] Fix TOC insertion by Markdown All in One VS Code extension Fixed an extra TOC jump link inserted by VSCode Markdown All in One VS Code extension. --- docs/faq.md | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/docs/faq.md b/docs/faq.md index 4df2dcc5..502b71b5 100644 --- a/docs/faq.md +++ b/docs/faq.md @@ -81,7 +81,6 @@ A list of frequently-asked questions and answers for MeshCore - [7.5. Q: What is the format of a contact or channel QR code?](#75-q-what-is-the-format-of-a-contact-or-channel-qr-code) - [7.6. Q: How do I connect to the companion via WIFI, e.g. using a heltec v3?](#76-q-how-do-i-connect-to-the-companion-via-wifi-eg-using-a-heltec-v3) - [7.7. Q: I have a Station G2, or a Heltec V4, or an Ikoka Stick, or a radio with a EByte E22-900M30S or a E22-900M33S module, what should their transmit power be set to?](#77-q-i-have-a-station-g2-or-a-heltec-v4-or-an-ikoka-stick-or-a-radio-with-a-ebyte-e22-900m30s-or-a-e22-900m33s-module-what-should-their-transmit-power-be-set-to) - - [⚠️ **WARNING: Set these values at your own risk. Incorrect power settings can permanently damage your radio hardware.**](#️-warning-set-these-values-at-your-own-risk-incorrect-power-settings-can-permanently-damage-your-radio-hardware) ## 1. Introduction @@ -822,7 +821,7 @@ Edit WIFI_SSID and WIFI_PWD in `./variants/heltec_v3/platformio.ini` and then fl For companion radios, you can set these radios' transmit power in the smartphone app. For repeater and room server radios, you can set their transmit power using the command line command `set tx`. You can get their current value using command line comand `get tx` - ### ⚠️ **WARNING: Set these values at your own risk. Incorrect power settings can permanently damage your radio hardware.** + ⚠️ **WARNING: Set these values at your own risk. Incorrect power settings can permanently damage your radio hardware.** | Device / Model | Region / Description | In-App Setting (dBm) | Target Radio Output | Notes | | :--- | :--- | :--- | :--- | :--- | From 30963231ce630766fef44727cb1519a73cd5c3ca Mon Sep 17 00:00:00 2001 From: liamcottle Date: Tue, 31 Mar 2026 00:51:15 +1300 Subject: [PATCH 11/54] update docs logo --- docs/_assets/meshcore.svg | 12 ++++++++++++ mkdocs.yml | 2 +- 2 files changed, 13 insertions(+), 1 deletion(-) create mode 100644 docs/_assets/meshcore.svg diff --git a/docs/_assets/meshcore.svg b/docs/_assets/meshcore.svg new file mode 100644 index 00000000..eb1b7bc4 --- /dev/null +++ b/docs/_assets/meshcore.svg @@ -0,0 +1,12 @@ + + + + + + + + + + + + diff --git a/mkdocs.yml b/mkdocs.yml index 3a76842f..110680cd 100644 --- a/mkdocs.yml +++ b/mkdocs.yml @@ -8,7 +8,7 @@ edit_uri: edit/main/docs/ theme: name: material - logo: _assets/meshcore_tm.svg + logo: _assets/meshcore.svg features: - content.action.edit - content.code.copy From 633db082d14a141dc9af25b8fe5ea2f961e82b30 Mon Sep 17 00:00:00 2001 From: uncle lit <43320854+LitBomb@users.noreply.github.com> Date: Tue, 31 Mar 2026 12:22:11 -0700 Subject: [PATCH 12/54] fixed typos and refined multibyte sections. fixed typos and refined multibyte sections. --- docs/faq.md | 32 +++++++++++++++++--------------- 1 file changed, 17 insertions(+), 15 deletions(-) diff --git a/docs/faq.md b/docs/faq.md index 502b71b5..36cd3fc8 100644 --- a/docs/faq.md +++ b/docs/faq.md @@ -30,7 +30,9 @@ A list of frequently-asked questions and answers for MeshCore - [3.9.1. Q: **What path hash sizes will my repeater forward?**](#391-q-what-path-hash-sizes-will-my-repeater-forward) - [3.9.2. Q: **What determines a packet's path hash size?**](#392-q-what-determines-a-packets-path-hash-size) - [3.9.3. Q: **How do I change my companion's path hash size?**](#393-q-how-do-i-change-my-companions-path-hash-size) - - [3.9.4. Q: **What does `path.hash.mode` on a repeater do?**](#394-q-what-does-pathhashmode-on-a-repeater-do) + - [3.9.4. Q: **What does the CLI command `path.hash.mode` do on a repeater?**](#394-q-what-does-the-cli-command-pathhashmode-do-on-a-repeater) + - [3.9.5. Q: **Why use 2- or 3-byte path hash for adverts?**](#395-q-why-use-2--or-3-byte-path-hash-for-adverts) + - [3.9.6. Q: **When can we move away from 1-byte path hash for channel and direct messages?**](#396-q-when-can-we-move-away-from-1-byte-path-hash-for-channel-and-direct-messages) - [4. T-Deck Related](#4-t-deck-related) - [4.1. Q: Is there a user guide for T-Deck, T-Pager, T-Watch, or T-Display Pro?](#41-q-is-there-a-user-guide-for-t-deck-t-pager-t-watch-or-t-display-pro) - [4.2. Q: What are the steps to get a T-Deck into DFU (Device Firmware Update) mode?](#42-q-what-are-the-steps-to-get-a-t-deck-into-dfu-device-firmware-update-mode) @@ -297,31 +299,31 @@ This is a very low cost operation. AGC reset is done by simply setting `state = ### 3.9. Q: What is multi-byte support? What do 1-byte, 2-byte, 3-byte adverts and messages mean? **A:** - -**Background:** -The orginal MeshCore protocol design uses the first byte of a repeater's public key to denote the repeater in a path. And with 1 byte for each repeater in the path, MeshCore packets can travel as many as 64 hops. +The original MeshCore protocol design uses the first byte of a repeater's public key to denote the repeater in a path. And with 1 byte for each repeater in the path, MeshCore packets can travel as many as 64 hops. However, with 1 byte, there are only 254 unique IDs (exclude 00 and FF which are reserved). Many meshes group have multiple repeaters with the same first byte in their public keys. Packets continue to pass through repeaters and the mesh is not harmed in anyway. It does make it harder for tools to analyze paths with duplicated repeater IDs. -Firmware version 1.14 and newer introduces the ability for repeaters to advert with 1-, 2-, or 3-byte adverts. Companions can also send out channel and direct messages 1-, 2-, or 3-byte path. Adverts and messages sent in 1-byte path is compatible with repeater firmware older or newer than 1.14. They will travel up to 64 hops. 2-byte adverts and messages will travel up to 32 hops. 3-byte adverts and messages will travel up to 21 hops. +Firmware version 1.14 and newer introduces the ability for repeaters to advert with 1-, 2-, or 3-byte adverts. Companions can also send out channel and direct messages with 1-, 2-, or 3-byte path. Adverts and messages sent in 1-byte path is compatible with repeater firmware older or newer than 1.14. They will travel up to 64 hops. 2-byte adverts and messages will travel up to 32 hops. 3-byte adverts and messages will travel up to 21 hops. ### 3.9.1. Q: **What path hash sizes will my repeater forward?** -Repeaters running firmware 1.14+ will repeat packets with 1-, 2-, or 3-byte path hash. Repeaters on firmware older than 1.14 will only repeat 1-byte path hash packets and will silently drop 2- and 3-byte packets. +Repeaters running firmware 1.14+ repeat packets sent with 1-, 2-, or 3-byte path hash. Repeaters on firmware older than 1.14 only repeat 1-byte path hash packets and silently drop 2- and 3-byte packets. ### 3.9.2. Q: **What determines a packet's path hash size?** -The original sender. The most common original sender is a companion app. The other common original sender is a repeater, when it broadcasts its advert. +The original packet sender determines the path hash size. The most common original sender is a companion app. The other common original sender is a repeater, when it broadcasts its advert. ### 3.9.3. Q: **How do I change my companion's path hash size?** -As of firmware 1.14, you can set your companion's message path hash size in the Experimental settings section of the app. Until your regional mesh has the vast majority of the repeaters updated to 1.14+ firmware, it is recommended to keep your companion at the default 1-byte because pre-1.14 repeaters will silently drop messages with larger path hashes. +As of firmware version 1.14 and MeshCore app version 1.41.0, in the MeshCore app, you can set your companion's message path hash size in `Settings (gear icon)`, `Experimental Settings`. -### 3.9.4. Q: **What does `path.hash.mode` on a repeater do?** +Until your regional mesh has the vast majority of the repeaters updated to 1.14+ firmware, it is recommended to keep your companion at the default 1-byte because pre-1.14 repeaters will silently drop messages with larger path hashes. -It *only* controls the path hash size used in that repeater's own advert broadcasts. It does **not** affect which packets the repeater forwards. A 1.14+ repeater will always forward 1-, 2-, and 3-byte packets regardless of this setting. +### 3.9.4. Q: **What does the CLI command `path.hash.mode` do on a repeater?** -You can set it with `set path.hash.mode {0|1|2}`: +This CLI command `path.hash.mode` *only* controls the path hash size used in a repeater's own advert broadcasts. It does **NOT** affect which packets the repeater forwards. A repeater with firmware 1.14+ always forward 1-, 2-, and 3-byte packets regardless of this setting. + +Usage: `set path.hash.mode {0|1|2}`: ``` ┌────────────────┬───────────────────────┐ @@ -337,13 +339,13 @@ You can set it with `set path.hash.mode {0|1|2}`: It is safe to set your 1.14+ repeaters to mode 1 or 2. -**Why use 2- or 3-byte path hash for adverts?** +### 3.9.5. Q: **Why use 2- or 3-byte path hash for adverts?** -A longer path hash helps tools like the LetsMesh Analyzer and MeshMapper disambiguate repeaters more reliably. With only 1 byte, the chance of different repeaters have the same first byte in their public key is high, making it harder to tell them apart in network analysis. Since this only affects adverts, there's no downside. 2- and 3-byte adverts don't travel as far, but it is not important for MechCore nodes to hear a repeater's advert that is 21 or 32 hops away. +A longer path hash helps tools like the LetsMesh.net Analyzer and MeshMapper disambiguate repeaters more reliably. With only 1 byte, the chance of different repeaters having the same first byte in their public key is high, making it harder to tell them apart in mesh network analysis. Since this only affects adverts, there's no downside. 2- and 3-byte adverts don't travel as far as 1-byte adverts, but it is not important for MeshCore nodes to hear a repeater's advert that are 21 or 32 hops away. -**When can we move away from 1-byte path hash?** +### 3.9.6. Q: **When can we move away from 1-byte path hash for channel and direct messages?** -You should move to send 2-byte or 3-byte channel and direct messages when the vast majority of the repeaters in your regional mesh are updated to firmware version 1.14 or newer. Setting your repeater's `path.hash.mode` to 1 (for 2-byte path) or 2 (for 3-byte path) helps the community gauge how many repeaters have updated to 1.14+. Please work with your MeshCore community together to decide when to switch to 2-byte path or 3-byte path for messages. +You should move to send 2-byte or 3-byte channel and direct messages when the vast majority of the repeaters in your regional mesh are updated to firmware version 1.14 or newer. Setting your repeater's `path.hash.mode` to 1 (for 2-byte path hash) or 2 (for 3-byte path hash) now helps the community gauge to how many repeaters have updated to 1.14+. Please work with your MeshCore community together to decide when to switch to 2-byte path or 3-byte path for channel and direct messages. --- From a9b55f58f1611487c5cce485392b610e191a392c Mon Sep 17 00:00:00 2001 From: liamcottle Date: Thu, 2 Apr 2026 23:24:17 +1300 Subject: [PATCH 13/54] update neighbor.remove docs --- docs/cli_commands.md | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/docs/cli_commands.md b/docs/cli_commands.md index 8ae95443..0e785f4e 100644 --- a/docs/cli_commands.md +++ b/docs/cli_commands.md @@ -102,7 +102,9 @@ This document provides an overview of CLI commands that can be sent to MeshCore - `neighbor.remove ` **Parameters:** -- `pubkey_prefix`: The public key of the node to remove from the neighbors list +- `pubkey_prefix`: The public key of the node to remove from the neighbors list. This can be a short prefix or the full key. All neighbors matching the provided prefix will be removed. + +**Note:** You can remove all neighbors by sending a space character as the prefix. The space indicates an empty prefix, which matches all existing neighbors. --- From 8ede764104a2766b227aa36fbd1822759f62f82d Mon Sep 17 00:00:00 2001 From: liamcottle Date: Fri, 3 Apr 2026 17:07:02 +1300 Subject: [PATCH 14/54] update readme links --- README.md | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/README.md b/README.md index 3a671f0b..ebad1f6f 100644 --- a/README.md +++ b/README.md @@ -29,7 +29,8 @@ MeshCore provides the ability to create wireless mesh networks, similar to Mesht ## 🚀 How to Get Started - Watch the [MeshCore Intro Video](https://www.youtube.com/watch?v=t1qne8uJBAc) by Andy Kirby. -- Read through our [Frequently Asked Questions](./docs/faq.md) section. +- Watch the [MeshCore Technical Presentation](https://www.youtube.com/watch?v=OwmkVkZQTf4) by Liam Cottle. +- Read through our [Frequently Asked Questions](./docs/faq.md) and [Documentation](https://docs.meshcore.io). - Flash the MeshCore firmware on a supported device. - Connect with a supported client. @@ -51,7 +52,7 @@ The Simple Secure Chat example can be interacted with through the Serial Monitor We have prebuilt firmware ready to flash on supported devices. -- Launch https://flasher.meshcore.co.uk +- Launch https://meshcore.io/flasher - Select a supported device - Flash one of the firmware types: - Companion, Repeater or Room Server @@ -73,13 +74,13 @@ The companion firmware can be connected to via BLE, USB or WiFi depending on the The repeater and room server firmwares can be setup via USB in the web config tool. -- https://config.meshcore.dev +- https://config.meshcore.io They can also be managed via LoRa in the mobile app by using the Remote Management feature. ## 🛠 Hardware Compatibility -MeshCore is designed for devices listed in the [MeshCore Flasher](https://flasher.meshcore.co.uk) +MeshCore is designed for devices listed in the [MeshCore Flasher](https://meshcore.io/flasher) ## 📜 License From c0252ab82c1826f0842f193cf2c2b83983a74d21 Mon Sep 17 00:00:00 2001 From: Wessel Nieboer Date: Fri, 13 Mar 2026 14:06:09 +0100 Subject: [PATCH 15/54] Add sanity build for LR1110 and SX1276 too --- .github/workflows/pr-build-check.yml | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/.github/workflows/pr-build-check.yml b/.github/workflows/pr-build-check.yml index 37f3701b..67468b56 100644 --- a/.github/workflows/pr-build-check.yml +++ b/.github/workflows/pr-build-check.yml @@ -39,6 +39,10 @@ jobs: - wio-e5-mini_repeater # ESP32-C6 - LilyGo_Tlora_C6_repeater_ + # LR1110 (nRF52) + - wio_wm1110_repeater + # SX1276 (ESP32) + - Tbeam_SX1276_repeater steps: - name: Clone Repo From a5ae89aac011e09a059e078f113df7abde8bbbbb Mon Sep 17 00:00:00 2001 From: Wessel Nieboer Date: Thu, 12 Mar 2026 05:32:27 +0100 Subject: [PATCH 16/54] Fix RAK4631 SX1262 hardware pin config --- variants/rak4631/variant.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/variants/rak4631/variant.h b/variants/rak4631/variant.h index 142d93e9..38cc8868 100644 --- a/variants/rak4631/variant.h +++ b/variants/rak4631/variant.h @@ -147,7 +147,7 @@ extern "C" // LoRa radio module pins for RAK4631 #define P_LORA_DIO_1 (47) #define P_LORA_NSS (42) -#define P_LORA_RESET (-1) +#define P_LORA_RESET (38) #define P_LORA_BUSY (46) #define P_LORA_SCLK (43) #define P_LORA_MISO (45) From 9ec08228e50f22b0f8fac4a545fd275739664977 Mon Sep 17 00:00:00 2001 From: liamcottle Date: Sun, 5 Apr 2026 22:04:36 +1200 Subject: [PATCH 17/54] update faq --- docs/faq.md | 56 ++++++++++++++++++++++++++--------------------------- 1 file changed, 28 insertions(+), 28 deletions(-) diff --git a/docs/faq.md b/docs/faq.md index 36cd3fc8..46741d1c 100644 --- a/docs/faq.md +++ b/docs/faq.md @@ -88,7 +88,7 @@ A list of frequently-asked questions and answers for MeshCore ### 1.1. Q: What is MeshCore? -**A:** MeshCore is a multi platform system for enabling secure text based communications utilising LoRa radio hardware. It can be used for Off-Grid Communication, Emergency Response & Disaster Recovery, Outdoor Activities, Tactical Security including law enforcement and private security and also IoT sensor networks. ([source](https://meshcore.co.uk/)) +**A:** MeshCore is a multi platform system for enabling secure text based communications utilising LoRa radio hardware. It can be used for Off-Grid Communication, Emergency Response & Disaster Recovery, Outdoor Activities, Tactical Security including law enforcement and private security and also IoT sensor networks. ([source](https://meshcore.io/)) MeshCore is free and open source: * MeshCore is the routing and firmware etc, available on GitHub under MIT license @@ -106,19 +106,20 @@ Anyone is able to build anything they like on top of MeshCore without paying any ### 1.2. Q: What do you need to start using MeshCore? **A:** Everything you need for MeshCore is available at: -- Main web site: [https://meshcore.co.uk](https://meshcore.co.uk) -- Firmware Flasher: [https://flasher.meshcore.co.uk](https://flasher.meshcore.co.uk) +- Main Website: [https://meshcore.io](https://meshcore.io) +- Firmware Flasher: [https://flasher.meshcore.io](https://flasher.meshcore.io) - MeshCore Firmware on GitHub: [https://github.com/meshcore-dev/MeshCore](https://github.com/meshcore-dev/MeshCore) -- MeshCore Companion App: [https://meshcore.nz](https://meshcore.nz) -- MeshCore Map: [https://meshcore.co.uk/map.html](https://meshcore.co.uk/map.html) -- Andy Kirby has a very useful [intro video](https://www.youtube.com/watch?v=t1qne8uJBAc) for beginners. +- MeshCore Companion Web App: [https://app.meshcore.nz](https://app.meshcore.nz) +- MeshCore Map: [https://map.meshcore.io](https://map.meshcore.io) +- Andy Kirby's [MeshCore Intro Video](https://www.youtube.com/watch?v=t1qne8uJBAc) +- Liam Cottle's [MeshCore Technical Presentation](https://www.youtube.com/watch?v=OwmkVkZQTf4) You need LoRa hardware devices to run MeshCore firmware as clients or server (repeater and room server). #### 1.2.1. Hardware MeshCore is available on a variety of 433MHz, 868MHz and 915MHz LoRa devices. For example, Lilygo T-Deck, T-Pager, RAK Wireless WisBlock RAK4631 devices (e.g. 19003, 19007, 19026), Heltec V3, Xiao S3 WIO, Xiao C3, Heltec T114, Station G2, Nano G2 Ultra, Seeed Studio T1000-E. More devices are being added regularly. -For an up-to-date list of supported devices, please go to https://flasher.meshcore.co.uk/ +For an up-to-date list of supported devices, please go to https://flasher.meshcore.io To use MeshCore without using a phone as the client interface, you can run MeshCore on a LiLygo's T-Deck, T-Deck Plus, T-Pager, T-Watch, or T-Display Pro. MeshCore Ultra firmware running on these devices are a complete off-grid secure communication solution. @@ -130,12 +131,11 @@ Companion radios are for connecting to the Android app or web app as a messenger 1. **BLE Companion** BLE Companion firmware runs on a supported LoRa device and connects to a smart device running the Android or iOS MeshCore client over BLE - + 2. **USB Serial Companion** USB Serial Companion firmware runs on a supported LoRa device and connects to a smart device or a computer over USB Serial running the MeshCore web client - - + #### 1.2.4. Repeater Repeaters are used to extend the range of a MeshCore network. Repeater firmware runs on the same devices that run client firmware. A repeater's job is to forward MeshCore packets to the destination device. It does **not** forward or retransmit every packet it receives, unlike other LoRa mesh systems. @@ -229,11 +229,11 @@ The separate `set advert.interval {minutes}` command controls the local zero-hop Repeater or room server can be administered with one of the options below: -- After a repeater or room server firmware is flashed on to a LoRa device, go to and use the web user interface to connect to the LoRa device via USB serial. From there you can set the name of the server, its frequency and other related settings, location, passwords etc. +- After a repeater or room server firmware is flashed on to a LoRa device, go to and use the web user interface to connect to the LoRa device via USB serial. From there you can set the name of the server, its frequency and other related settings, location, passwords etc. ![image](https://github.com/user-attachments/assets/2a9d9894-e34d-4dbe-b57c-fc3c250a2d34) -- Connect the server device using a USB cable to a computer running Chrome on https://flasher.meshcore.co.uk/, then use the `console` feature to connect to the device +- Connect the server device using a USB cable to a computer running Chrome on https://flasher.meshcore.io, then use the `console` feature to connect to the device - Use a MeshCore smartphone clients to remotely administer servers via LoRa. @@ -365,7 +365,7 @@ You should move to send 2-byte or 3-byte channel and direct messages when the va 5. Hear USB connection sound 6. Release trackball 7. T-Deck in DFU mode now -8. At this point you can begin flashing using +8. At this point you can begin flashing using ### 4.3. Q: Why is my T-Deck Plus not getting any satellite lock? **A:** For T-Deck Plus, the GPS baud rate should be set to **38400**. Also, some T-Deck Plus devices were found to have the GPS module installed upside down, with the GPS antenna facing down instead of up. If your T-Deck Plus still doesn't get any satellite lock after setting the baud rate to 38400, you might need to open the device to check the GPS orientation. @@ -586,7 +586,7 @@ MeshCore clients would need to reset path constantly and flood traffic across th This could change in the future if MeshCore develops a client firmware that repeats. [Source](https://discord.com/channels/826570251612323860/1330643963501351004/1354780032140054659) -### 5.12. Q: How do I add a node to the [MeshCore Map](https://meshcore.co.uk/map.html) +### 5.12. Q: How do I add a node to the [MeshCore Map](https://map.meshcore.io) **A:** To add a BLE Companion radio, connect to the BLE Companion radio from the MeshCore smartphone app. In the app, tap the `3 dot` menu icon at the top right corner, then tap `Internet Map`. Tap the `3 dot` menu icon again and choose `Add me to the Map` @@ -603,18 +603,18 @@ Below are the instructions to flash firmware onto a supported LoRa device using > Instructions for nRF devices like RAK, T1000-E, T114 are immediately after the ESP instructions For ESP-based devices (e.g. Heltec V3) you need: -- Download firmware file from flasher.meshcore.co.uk +- Download firmware file from https://flasher.meshcore.io - Go to the web site on a browser, find the section that has the firmware up need - Click the Download button, right click on the file you need, for example, - `Heltec_V3_companion_radio_ble-v1.7.1-165fb33.bin` - Non-merged bin keeps the existing Bluetooth pairing database - `Heltec_v3_companion_radio_usb-v1.7.1-165fb33-merged.bin` - Merged bin overwrites everything including the bootloader, existing Bluetooth pairing database, but keeps configurations. - - Right click on the file name and copy the link and note it for later use here is an example: `https://flasher.meshcore.dev/releases/download/companion-v1.7.1/Heltec_v3_companion_radio_ble-v1.7.1-165fb33.bin` + - Right click on the file name and copy the link and note it for later use here is an example: `https://flasher.meshcore.io/releases/download/companion-v1.7.1/Heltec_v3_companion_radio_ble-v1.7.1-165fb33.bin` - Run: - - `wget https://flasher.meshcore.dev/releases/download/companion-v1.7.1/Heltec_v3_companion_radio_ble-v1.7.1-165fb33.bin` to download the firmware file for your device type. or the version you need - USB, BLE, Repeater, Room Server, merged bin or non-merged bin + - `wget https://flasher.meshcore.io/releases/download/companion-v1.7.1/Heltec_v3_companion_radio_ble-v1.7.1-165fb33.bin` to download the firmware file for your device type. or the version you need - USB, BLE, Repeater, Room Server, merged bin or non-merged bin - If the above wget command only downloads a very small file (10K bytes instead of more than 100K byte, use this command instead: - - `wget --user-agent="Mozilla/5.0" --content-disposition "https://flasher.meshcore.dev/releases/download/companion-v1.7.1/Heltec_v3_companion_radio_usb-v1.7.1-165fb33.bin"` + - `wget --user-agent="Mozilla/5.0" --content-disposition "https://flasher.meshcore.io/releases/download/companion-v1.7.1/Heltec_v3_companion_radio_usb-v1.7.1-165fb33.bin"` - Confirm the `ttyXXXX` device path on your Raspberry Pi: - Go to `/dev` directory, run ls command to find confirm your device path - They are usually `/dev/ttyUSB0` for ESP devices @@ -631,14 +631,14 @@ For ESP-based devices (e.g. Heltec V3) you need: **Instructions for nRF devices:** For nRF devices (e.g. RAK, Heltec T114) you need the following: -- Download firmware file from flasher.meshcore.co.uk +- Download firmware file from https://flasher.meshcore.io - Go to the web site on a browser, find the section that has the firmware up need - You need the ZIP version for the adafruit flash tool (below) - Click the Download button, right click on the ZIP file, for example: - `RAK_4631_companion_radio_ble-v1.7.1-165fb33.zip` - - Right click on the file name and copy the link and note it for later use here is an example: `https://flasher.meshcore.dev/releases/download/companion-v1.7.1/RAK_4631_companion_radio_ble-v1.7.1-165fb33.zip` + - Right click on the file name and copy the link and note it for later use here is an example: `https://flasher.meshcore.io/releases/download/companion-v1.7.1/RAK_4631_companion_radio_ble-v1.7.1-165fb33.zip` - Run: - - `wget https://flasher.meshcore.dev/releases/download/companion-v1.7.1/RAK_4631_companion_radio_ble-v1.7.1-165fb33.zip` to download the firmware file for your device type. or the version you need - USB, BLE, Repeater, Room Server, ZIP file only + - `wget https://flasher.meshcore.io/releases/download/companion-v1.7.1/RAK_4631_companion_radio_ble-v1.7.1-165fb33.zip` to download the firmware file for your device type. or the version you need - USB, BLE, Repeater, Room Server, ZIP file only - Confirm the `ttyXXXX` device path on your Raspberry Pi: - Go to `/dev` directory, run ls command to find confirm your device path - They are usually `/dev/ttyACM0` for nRF devices @@ -666,10 +666,10 @@ As new MeshCore community projects become available on a weekly basis, we have s ### 5.15. Q: Are there client applications for Windows or Mac? -**A:** Yes, the same iOS and Android client is also available for Windows and Intel Mac (sorry, not available for ARM-based Mac yet). You can find them together with the Android APK here: +**A:** Yes, the same iOS and Android client is also available for Windows and Mac. You can find them together with the Android APK here: https://files.liamcottle.net/MeshCore -Both the Windows and Intel Mac versions of the client app are fully unlocked and are free to use. +Both the Windows and Mac versions of the client app are fully unlocked and are free to use. ### 5.16. Q: Are there any resources that compare MeshCore to other LoRa systems? @@ -718,16 +718,16 @@ You can get the epoch time on and use it to se - For Heltec T114, click the reset button **TWICE** (the bottom button) - For Xiao nRF52, click the reset button once. If that doesn't work, quickly double click the reset button twice. If that doesn't work, disconnection the board from your PC and reconnect again ([seeed studio wiki](https://wiki.seeedstudio.com/XIAO_BLE/#access-the-swd-pins-for-debugging-and-reflashing-bootloader)) 5. A new folder will appear on your computer's desktop -6. Download the `flash_erase*.uf2` file for your device on flasher.meshcore.co.uk +6. Download the `flash_erase*.uf2` file for your device on https://flasher.meshcore.io - RAK WisBlock and Heltec T114: `Flash_erase-nRF32_softdevice_v6.uf2` - Seeed Studio Xiao nRF52 WIO: `Flash_erase-nRF52_softdevice_v7.uf2` 8. drag and drop the uf2 file for your device to the root of the new folder 9. Wait for the copy to complete. You might get an error dialog, you can ignore it -10. Go to https://flasher.meshcore.co.uk/, click `Console` and select the serial port for your connected device +10. Go to https://flasher.meshcore.io, click `Console` and select the serial port for your connected device 11. In the console, press enter. Your flash should now be erased 12. You may now flash the latest MeshCore firmware onto your device -Separately, starting in firmware version 1.7.0, there is a CLI Rescue mode. If your device has a user button (e.g. some RAK, T114), you can activate the rescue mode by hold down the user button of the device within 8 seconds of boot. Then you can use the 'Console' on flasher.meshcore.co.uk +Separately, starting in firmware version 1.7.0, there is a CLI Rescue mode. If your device has a user button (e.g. some RAK, T114), you can activate the rescue mode by hold down the user button of the device within 8 seconds of boot. Then you can use the 'Console' on https://flasher.meshcore.io ### 6.8. Q: WebFlasher fails on Linux with failed to open @@ -745,7 +745,7 @@ Allow the browser user on it: **A:** The steps below work on both Android and iOS as nRF has made both apps' user interface the same on both platforms: 1. Download nRF's DFU app from iOS App Store or Android's Play Store, you can find the app by searching for `nrf dfu`, the app's full name is `nRF Device Firmware Update` -2. On flasher.meshcore.co.uk, download the **ZIP** version of the firmware for your nRF device (e.g. RAK or Heltec T114 or Seeed Studio's Xiao) +2. On https://flasher.meshcore.io, download the **ZIP** version of the firmware for your nRF device (e.g. RAK or Heltec T114 or Seeed Studio's Xiao) 3. From the MeshCore app, login remotely to the repeater you want to update with admin privilege 4. Go to the Command Line tab, type `start ota` and hit enter. 5. you should see `OK` to confirm the repeater device is now in OTA mode @@ -768,7 +768,7 @@ After this bootloader is flashed onto the device, you can trigger over the air u ### 7.2. Q: How to update ESP32-based devices over the air? **A:** For ESP32-based devices (e.g. Heltec V3): -1. On flasher.meshcore.co.uk, download the **non-merged** version of the firmware for your ESP32 device (e.g. `Heltec_v3_repeater-v1.6.2-4449fd3.bin`, no `"merged"` in the file name) +1. On https://flasher.meshcore.io, download the **non-merged** version of the firmware for your ESP32 device (e.g. `Heltec_v3_repeater-v1.6.2-4449fd3.bin`, no `"merged"` in the file name) 2. From the MeshCore app, login remotely to the repeater you want to update with admin privilege 4. Go to the Command Line tab, type `start ota` and hit enter. 5. you should see `OK` to confirm the repeater device is now in OTA mode From 992dddeee5cdaf4802c9e905f964c5b083f72def Mon Sep 17 00:00:00 2001 From: Kevin Le Date: Sat, 18 Apr 2026 09:24:53 +0700 Subject: [PATCH 18/54] Added support for Expansion Kit to Heltec V4 OLED repeaters --- variants/heltec_v4/platformio.ini | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/variants/heltec_v4/platformio.ini b/variants/heltec_v4/platformio.ini index 6f6bf2b5..87632f32 100644 --- a/variants/heltec_v4/platformio.ini +++ b/variants/heltec_v4/platformio.ini @@ -102,6 +102,28 @@ lib_deps = ${esp32_ota.lib_deps} bakercp/CRC32 @ ^2.0.0 +[env:heltec_v4_expansionkit_repeater] +extends = heltec_v4_oled +build_flags = + ${heltec_v4_oled.build_flags} + -D DISPLAY_CLASS=SSD1306Display + -D ADVERT_NAME='"Heltec Repeater"' + -D ADVERT_LAT=0.0 + -D ADVERT_LON=0.0 + -D ADMIN_PASSWORD='"password"' + -D MAX_NEIGHBOURS=50 +; -D MESH_PACKET_LOGGING=1 +; -D MESH_DEBUG=1 + -D ENV_PIN_SDA=4 + -D ENV_PIN_SCL=3 +build_src_filter = ${heltec_v4_oled.build_src_filter} + + + +<../examples/simple_repeater> +lib_deps = + ${heltec_v4_oled.lib_deps} + ${esp32_ota.lib_deps} + bakercp/CRC32 @ ^2.0.0 + [env:heltec_v4_repeater_bridge_espnow] extends = heltec_v4_oled build_flags = From 3fcf5b548b753d407cef1e364a306e440219231f Mon Sep 17 00:00:00 2001 From: Confi <9595028+Confituurke@users.noreply.github.com> Date: Wed, 25 Mar 2026 22:05:28 +0100 Subject: [PATCH 19/54] fix(sensecap_solar): set P_LORA_TX_LED to 12 after LED remap Align TX activity LED with LED_BLUE / variant.h after LED definition and power-button pin mapping changes. --- variants/sensecap_solar/platformio.ini | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/variants/sensecap_solar/platformio.ini b/variants/sensecap_solar/platformio.ini index aabbcf00..effef38c 100644 --- a/variants/sensecap_solar/platformio.ini +++ b/variants/sensecap_solar/platformio.ini @@ -13,7 +13,7 @@ build_flags = ${nrf52_base.build_flags} -D NRF52_POWER_MANAGEMENT -D RADIO_CLASS=CustomSX1262 -D WRAPPER_CLASS=CustomSX1262Wrapper - -D P_LORA_TX_LED=11 + -D P_LORA_TX_LED=12 -D P_LORA_DIO_1=1 -D P_LORA_RESET=2 -D P_LORA_BUSY=3 From e8907a31086dd0fb4adb55f5cdfbc26c84d3aaaf Mon Sep 17 00:00:00 2001 From: Marco Date: Sun, 19 Apr 2026 15:29:43 +0200 Subject: [PATCH 20/54] Add Heltec V4 set adc.multiplier --- variants/heltec_v4/HeltecV4Board.cpp | 2 +- variants/heltec_v4/HeltecV4Board.h | 20 ++++++++++++++++++-- 2 files changed, 19 insertions(+), 3 deletions(-) diff --git a/variants/heltec_v4/HeltecV4Board.cpp b/variants/heltec_v4/HeltecV4Board.cpp index 49580d2e..8f013797 100644 --- a/variants/heltec_v4/HeltecV4Board.cpp +++ b/variants/heltec_v4/HeltecV4Board.cpp @@ -73,7 +73,7 @@ void HeltecV4Board::begin() { digitalWrite(PIN_ADC_CTRL, LOW); - return (5.42 * (3.3 / 1024.0) * raw) * 1000; + return (adc_mult * (3.3 / 1024.0) * raw) * 1000; } const char* HeltecV4Board::getManufacturerName() const { diff --git a/variants/heltec_v4/HeltecV4Board.h b/variants/heltec_v4/HeltecV4Board.h index 4d5ee461..95def06c 100644 --- a/variants/heltec_v4/HeltecV4Board.h +++ b/variants/heltec_v4/HeltecV4Board.h @@ -5,8 +5,16 @@ #include #include #include "LoRaFEMControl.h" + +#ifndef ADC_MULTIPLIER + #define ADC_MULTIPLIER 5.42 +#endif + class HeltecV4Board : public ESP32Board { +protected: + float adc_mult = ADC_MULTIPLIER; + public: RefCountedDigitalPin periph_power; LoRaFEMControl loRaFEMControl; @@ -18,6 +26,14 @@ public: void enterDeepSleep(uint32_t secs, int pin_wake_btn = -1); void powerOff() override; uint16_t getBattMilliVolts() override; - const char* getManufacturerName() const override ; - + bool setAdcMultiplier(float multiplier) override { + if (multiplier == 0.0f) { + adc_mult = ADC_MULTIPLIER; + } else { + adc_mult = multiplier; + } + return true; + } + float getAdcMultiplier() const override { return adc_mult; } + const char* getManufacturerName() const override; }; From db7baa7bd7a10a9f22af968b8e1f6abadf89f2bc Mon Sep 17 00:00:00 2001 From: Scott Powell Date: Tue, 21 Apr 2026 12:07:39 +1000 Subject: [PATCH 21/54] * CommonCLI: bounds check added to "unknown config:" replies --- src/helpers/CommonCLI.cpp | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/src/helpers/CommonCLI.cpp b/src/helpers/CommonCLI.cpp index d495aada..1f03d915 100644 --- a/src/helpers/CommonCLI.cpp +++ b/src/helpers/CommonCLI.cpp @@ -2,6 +2,7 @@ #include "CommonCLI.h" #include "TxtDataHelpers.h" #include "AdvertDataHelpers.h" +#include "TxtDataHelpers.h" #include #ifndef BRIDGE_MAX_BAUD @@ -726,7 +727,8 @@ void CommonCLI::handleSetCmd(uint32_t sender_timestamp, char* command, char* rep strcpy(reply, "Error: unsupported by this board"); }; } else { - sprintf(reply, "unknown config: %s", config); + strcpy(reply, "unknown config: "); + StrHelper::strncpy(&reply[16], config, 160-17); } } From 3d982711a6014e318050c556c615916ebaa13391 Mon Sep 17 00:00:00 2001 From: Scott Powell Date: Tue, 21 Apr 2026 12:12:47 +1000 Subject: [PATCH 22/54] * CommonCLI: more reply bounds checking --- src/helpers/CommonCLI.cpp | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/src/helpers/CommonCLI.cpp b/src/helpers/CommonCLI.cpp index 1f03d915..b71afc72 100644 --- a/src/helpers/CommonCLI.cpp +++ b/src/helpers/CommonCLI.cpp @@ -286,7 +286,8 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, char* command, char* re // change admin password StrHelper::strncpy(_prefs->password, &command[9], sizeof(_prefs->password)); savePrefs(); - sprintf(reply, "password now: %s", _prefs->password); // echo back just to let admin know for sure!! + sprintf(reply, "password now: "); + StrHelper::strncpy(&reply[14], _prefs->password, 160-15); // echo back just to let admin know for sure!! } else if (memcmp(command, "clear stats", 11) == 0) { _callbacks->clearStats(); strcpy(reply, "(OK - stats reset)"); @@ -786,10 +787,11 @@ void CommonCLI::handleGetCmd(uint32_t sender_timestamp, char* command, char* rep } else if (memcmp(config, "direct.txdelay", 14) == 0) { sprintf(reply, "> %s", StrHelper::ftoa(_prefs->direct_tx_delay_factor)); } else if (memcmp(config, "owner.info", 10) == 0) { + auto start = reply; *reply++ = '>'; *reply++ = ' '; const char* sp = _prefs->owner_info; - while (*sp) { + while (*sp && reply - start < 159) { *reply++ = (*sp == '\n') ? '|' : *sp; // translate newline back to orig '|' sp++; } From 28b1586fd737533f0d8da46561791e406f34c0d3 Mon Sep 17 00:00:00 2001 From: me Date: Mon, 20 Apr 2026 20:45:04 -0700 Subject: [PATCH 23/54] feat(techo-lite): add Non-Shell (screenless) companion BLE variant T-Echo Lite Non-Shell has no ePaper display, but the existing companion BLE env inherits DISPLAY_CLASS=GxEPDDisplay from the base env. This causes display.begin() to run on non-existent hardware, corrupting BLE initialization and generating a random PIN that cannot be displayed, making BLE connection impossible. Add LilyGo_T-Echo-Lite_non_shell_companion_radio_ble env that: - excludes DISPLAY_CLASS and ePaper-related build flags - removes GxEPDDisplay.cpp and ui-new from build sources - uses static BLE_PIN_CODE=123456 (avoids random PIN generation) Also fix boards/t-echo.json: - add nrfutil to upload protocols list - add use_1200bps_touch=true and wait_for_upload_port=true to enable reliable flashing via PlatformIO upload button --- boards/t-echo.json | 7 ++-- variants/lilygo_techo_lite/platformio.ini | 44 +++++++++++++++++++++++ 2 files changed, 49 insertions(+), 2 deletions(-) diff --git a/boards/t-echo.json b/boards/t-echo.json index c974ca65..e0df6eac 100644 --- a/boards/t-echo.json +++ b/boards/t-echo.json @@ -53,11 +53,14 @@ "protocols": [ "jlink", "nrfjprog", + "nrfutil", "stlink", "cmsis-dap", "blackmagic" - ] + ], + "use_1200bps_touch": true, + "wait_for_upload_port": true }, "url": "https://os.mbed.com/platforms/Nordic-nRF52840-DK/", "vendor": "Nordic" -} \ No newline at end of file +} diff --git a/variants/lilygo_techo_lite/platformio.ini b/variants/lilygo_techo_lite/platformio.ini index 0ba6a197..88616858 100644 --- a/variants/lilygo_techo_lite/platformio.ini +++ b/variants/lilygo_techo_lite/platformio.ini @@ -96,3 +96,47 @@ build_src_filter = ${LilyGo_T-Echo-Lite.build_src_filter} lib_deps = ${LilyGo_T-Echo-Lite.lib_deps} densaugeo/base64 @ ~1.4.0 + +[env:LilyGo_T-Echo-Lite_non_shell_companion_radio_ble] +extends = LilyGo_T-Echo-Lite +upload_protocol = nrfutil +board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld +board_upload.maximum_size = 712704 +build_flags = + ${nrf52_base.build_flags} + -I variants/lilygo_techo_lite + -I src/helpers/nrf52 + -I lib/nrf52/s140_nrf52_6.1.1_API/include + -I lib/nrf52/s140_nrf52_6.1.1_API/include/nrf52 + -I src/helpers/ui + -I examples/companion_radio/ui-new + -D LILYGO_TECHO + -D RADIO_CLASS=CustomSX1262 + -D WRAPPER_CLASS=CustomSX1262Wrapper + -D LORA_TX_POWER=22 + -D SX126X_POWER_EN=30 + -D SX126X_CURRENT_LIMIT=140 + -D SX126X_RX_BOOSTED_GAIN=1 + -D P_LORA_TX_LED=LED_GREEN + -D DISABLE_DIAGNOSTIC_OUTPUT + -D ENV_INCLUDE_GPS=1 + -D GPS_BAUD_RATE=9600 + -D PIN_GPS_EN=GPS_EN + -D AUTO_OFF_MILLIS=0 + -D MAX_CONTACTS=350 + -D MAX_GROUP_CHANNELS=40 + -D BLE_PIN_CODE=123456 + -D OFFLINE_QUEUE_SIZE=256 + -D UI_RECENT_LIST_SIZE=9 + -D AUTO_SHUTDOWN_MILLIVOLTS=3300 +build_src_filter = ${nrf52_base.build_src_filter} + + + + + + + + + +<../variants/lilygo_techo_lite> + + + +<../examples/companion_radio/*.cpp> +lib_deps = + ${LilyGo_T-Echo-Lite.lib_deps} + densaugeo/base64 @ ~1.4.0 From 07671cf1fe6a1b9ed6bc3f24ec2a9ee52d21acbb Mon Sep 17 00:00:00 2001 From: Wessel Nieboer Date: Tue, 21 Apr 2026 21:29:18 +0200 Subject: [PATCH 24/54] Implement proper shutdown procedure for R1 neo fixes #2361 --- variants/muziworks_r1_neo/R1NeoBoard.cpp | 5 ++++- variants/muziworks_r1_neo/R1NeoBoard.h | 6 ++++++ 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/variants/muziworks_r1_neo/R1NeoBoard.cpp b/variants/muziworks_r1_neo/R1NeoBoard.cpp index 616d255a..89cde02a 100644 --- a/variants/muziworks_r1_neo/R1NeoBoard.cpp +++ b/variants/muziworks_r1_neo/R1NeoBoard.cpp @@ -14,9 +14,12 @@ const PowerMgtConfig power_config = { void R1NeoBoard::initiateShutdown(uint8_t reason) { // Disable LoRa module power before shutdown - MESH_DEBUG_PRINTLN("R1Neo: shutting down"); digitalWrite(SX126X_POWER_EN, LOW); + // Signal IO controller that MCU is off, then release DCDC latch + digitalWrite(PIN_SOFT_SHUTDOWN, LOW); + digitalWrite(PIN_DCDC_EN_MCU_HOLD, LOW); + if (reason == SHUTDOWN_REASON_LOW_VOLTAGE || reason == SHUTDOWN_REASON_BOOT_PROTECT) { configureVoltageWake(power_config.lpcomp_ain_channel, power_config.lpcomp_refsel); diff --git a/variants/muziworks_r1_neo/R1NeoBoard.h b/variants/muziworks_r1_neo/R1NeoBoard.h index c27ea232..c56f1f5c 100644 --- a/variants/muziworks_r1_neo/R1NeoBoard.h +++ b/variants/muziworks_r1_neo/R1NeoBoard.h @@ -18,6 +18,12 @@ public: R1NeoBoard() : NRF52Board("R1NEO_OTA") {} void begin(); +#ifdef NRF52_POWER_MANAGEMENT + void powerOff() override { + initiateShutdown(SHUTDOWN_REASON_USER); + } +#endif + #if defined(P_LORA_TX_LED) void onBeforeTransmit() override { digitalWrite(P_LORA_TX_LED, HIGH); // turn TX LED on From d516cd8a9eedfe0f4cd6c32e4526d6b0427ad338 Mon Sep 17 00:00:00 2001 From: pelgraine <140762863+pelgraine@users.noreply.github.com> Date: Fri, 10 Apr 2026 14:25:51 +1000 Subject: [PATCH 25/54] =?UTF-8?q?Fixes=20#1183=20=E2=80=94=20T-Echo=20Lite?= =?UTF-8?q?=20incorrect=20battery=20voltage?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Battery (TechoBoard.h/cpp): Added PIN_VBAT_MEAS_EN (P0.31) — the T-Echo Lite has a gated voltage divider that must be enabled before reading. Also added pinMode(PIN_VBAT_READ, INPUT) before each ADC read to reclaim P0.02 from other peripherals. Pin definitions hardcoded from LilyGo's t_echo_lite_config.h. I2C (variant.h): Corrected SDA/SCL from P0.04/P0.02 to P1.04/P1.02 per LilyGo's IIC_1_SDA/IIC_1_SCL. The old P0.02 mapping conflicted with the battery ADC pin. GPS (variant.h): Corrected all five GPS pin assignments to match LilyGo's config — UART TX/RX, wake, PPS, and power enable were all scrambled. SPI (variant.h): Fixed SPI_INTERFACES_COUNT from _PINNUM(0, 2) to (2). Tested on T-Echo Lite Non-Shell (USB-C, no display). Battery readings match Heltec V4 reference within 10mV. --- variants/lilygo_techo_lite/TechoBoard.cpp | 43 +++++++++++++++++------ variants/lilygo_techo_lite/TechoBoard.h | 19 +++++----- variants/lilygo_techo_lite/variant.h | 21 +++++------ 3 files changed, 53 insertions(+), 30 deletions(-) diff --git a/variants/lilygo_techo_lite/TechoBoard.cpp b/variants/lilygo_techo_lite/TechoBoard.cpp index 81d3d0c9..a11d31b2 100644 --- a/variants/lilygo_techo_lite/TechoBoard.cpp +++ b/variants/lilygo_techo_lite/TechoBoard.cpp @@ -8,24 +8,47 @@ void TechoBoard::begin() { NRF52Board::begin(); + // Configure battery measurement control BEFORE Wire.begin() + // to ensure P0.02 is not claimed by another peripheral + pinMode(PIN_VBAT_MEAS_EN, OUTPUT); + digitalWrite(PIN_VBAT_MEAS_EN, LOW); + pinMode(PIN_VBAT_READ, INPUT); + Wire.begin(); pinMode(SX126X_POWER_EN, OUTPUT); digitalWrite(SX126X_POWER_EN, HIGH); - delay(10); // give sx1262 some time to power up + delay(10); } uint16_t TechoBoard::getBattMilliVolts() { - int adcvalue = 0; - + // Use LilyGo's exact ADC configuration analogReference(AR_INTERNAL_3_0); analogReadResolution(12); - delay(10); - // ADC range is 0..3000mV and resolution is 12-bit (0..4095) - adcvalue = analogRead(PIN_VBAT_READ); - // Convert the raw value to compensated mv, taking the resistor- - // divider into account (providing the actual LIPO voltage) - return (uint16_t)((float)adcvalue * REAL_VBAT_MV_PER_LSB); + // Enable battery voltage divider (MOSFET gate on P0.31) + pinMode(PIN_VBAT_MEAS_EN, OUTPUT); + digitalWrite(PIN_VBAT_MEAS_EN, HIGH); + + // Reclaim P0.02 for analog input (in case another peripheral touched it) + pinMode(PIN_VBAT_READ, INPUT); + delay(10); // let divider + ADC settle + + // Read and average (matching LilyGo's approach) + uint32_t sum = 0; + for (int i = 0; i < 8; i++) { + sum += analogRead(PIN_VBAT_READ); + delayMicroseconds(100); + } + uint16_t adc = sum / 8; + + // Disable divider to save power + digitalWrite(PIN_VBAT_MEAS_EN, LOW); + + // LilyGo's exact formula: adc * (3000.0 / 4096.0) * 2.0 + // = adc * 0.73242188 * 2.0 = adc * 1.46484375 + uint16_t millivolts = (uint16_t)((float)adc * (3000.0f / 4096.0f) * 2.0f); + + return millivolts; } -#endif +#endif \ No newline at end of file diff --git a/variants/lilygo_techo_lite/TechoBoard.h b/variants/lilygo_techo_lite/TechoBoard.h index fda393e7..7a43fd83 100644 --- a/variants/lilygo_techo_lite/TechoBoard.h +++ b/variants/lilygo_techo_lite/TechoBoard.h @@ -4,14 +4,12 @@ #include #include -// built-ins -#define VBAT_MV_PER_LSB (0.73242188F) // 3.0V ADC range and 12-bit ADC resolution = 3000mV/4096 - -#define VBAT_DIVIDER (0.5F) // 150K + 150K voltage divider on VBAT -#define VBAT_DIVIDER_COMP (2.0F) // Compensation factor for the VBAT divider - -#define PIN_VBAT_READ (4) -#define REAL_VBAT_MV_PER_LSB (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB) +// ============================================================ +// T-Echo Lite battery pins — hardcoded from LilyGo t_echo_lite_config.h +// NOT using any defines from variant.h for battery measurement +// ============================================================ +#define PIN_VBAT_READ _PINNUM(0, 2) // BATTERY_ADC_DATA +#define PIN_VBAT_MEAS_EN _PINNUM(0, 31) // BATTERY_MEASUREMENT_CONTROL class TechoBoard : public NRF52BoardDCDC { public: @@ -20,10 +18,11 @@ public: uint16_t getBattMilliVolts() override; const char* getManufacturerName() const override { - return "LilyGo T-Echo"; + return "LilyGo T-Echo Lite"; } void powerOff() override { + digitalWrite(PIN_VBAT_MEAS_EN, LOW); #ifdef LED_RED digitalWrite(LED_RED, LOW); #endif @@ -41,4 +40,4 @@ public: #endif sd_power_system_off(); } -}; +}; \ No newline at end of file diff --git a/variants/lilygo_techo_lite/variant.h b/variants/lilygo_techo_lite/variant.h index 16e0b5cb..07202165 100644 --- a/variants/lilygo_techo_lite/variant.h +++ b/variants/lilygo_techo_lite/variant.h @@ -24,7 +24,7 @@ #define PIN_PWR_EN _PINNUM(0, 30) // RT9080_EN #define BATTERY_PIN _PINNUM(0, 2) -#define ADC_MULTIPLIER (4.90F) +#define ADC_MULTIPLIER (2.0F) #define ADC_RESOLUTION (14) #define BATTERY_SENSE_RES (12) @@ -47,13 +47,13 @@ //////////////////////////////////////////////////////////////////////////////// // I2C pin definition -#define PIN_WIRE_SDA _PINNUM(0, 4) // (SDA) -#define PIN_WIRE_SCL _PINNUM(0, 2) // (SCL) +#define PIN_WIRE_SDA _PINNUM(1, 4) // (SDA) - per LilyGo IIC_1_SDA +#define PIN_WIRE_SCL _PINNUM(1, 2) // (SCL) - per LilyGo IIC_1_SCL //////////////////////////////////////////////////////////////////////////////// // SPI pin definition -#define SPI_INTERFACES_COUNT _PINNUM(0, 2) +#define SPI_INTERFACES_COUNT (2) #define PIN_SPI_MISO _PINNUM(0, 17) // (MISO) #define PIN_SPI_MOSI _PINNUM(0, 15) // (MOSI) @@ -149,10 +149,11 @@ extern const int SCK; #define PIN_DISPLAY_BUSY DISP_BUSY //////////////////////////////////////////////////////////////////////////////// -// GPS +// GPS — per LilyGo t_echo_lite_config.h +// PIN_GPS_TX/RX named from GPS module's perspective -#define PIN_GPS_RX _PINNUM(1, 13) // RXD -#define PIN_GPS_TX _PINNUM(1, 15) // TXD -#define GPS_EN _PINNUM(1, 11) // POWER_RT9080_EN -#define PIN_GPS_STANDBY _PINNUM(1, 10) -#define PIN_GPS_PPS _PINNUM(0, 29) // 1PPS +#define PIN_GPS_TX _PINNUM(0, 29) // GPS UART TX → MCU RX +#define PIN_GPS_RX _PINNUM(1, 10) // GPS UART RX ← MCU TX +#define GPS_EN _PINNUM(1, 11) // GPS RT9080 power enable +#define PIN_GPS_STANDBY _PINNUM(1, 13) // GPS wake-up +#define PIN_GPS_PPS _PINNUM(1, 15) // GPS 1PPS \ No newline at end of file From 66fe9ac2db2f7d7bbfbbbf3c60f456eaaa7dc02f Mon Sep 17 00:00:00 2001 From: Wessel Nieboer Date: Mon, 20 Apr 2026 09:42:39 +0200 Subject: [PATCH 26/54] Fix FEM/LNA enbaled by default for Heltec T096, Heltec Wireless Tracker v2 Should only really be disabled when it causes issues. --- variants/heltec_t096/LoRaFEMControl.cpp | 2 +- variants/heltec_t096/LoRaFEMControl.h | 2 +- variants/heltec_tracker_v2/LoRaFEMControl.cpp | 2 +- variants/heltec_tracker_v2/LoRaFEMControl.h | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/variants/heltec_t096/LoRaFEMControl.cpp b/variants/heltec_t096/LoRaFEMControl.cpp index 9aeb8385..fb60a8f7 100644 --- a/variants/heltec_t096/LoRaFEMControl.cpp +++ b/variants/heltec_t096/LoRaFEMControl.cpp @@ -9,7 +9,7 @@ void LoRaFEMControl::init(void) pinMode(P_LORA_KCT8103L_PA_CSD, OUTPUT); digitalWrite(P_LORA_KCT8103L_PA_CSD, HIGH); pinMode(P_LORA_KCT8103L_PA_CTX, OUTPUT); - digitalWrite(P_LORA_KCT8103L_PA_CTX, HIGH); + digitalWrite(P_LORA_KCT8103L_PA_CTX, lna_enabled ? LOW : HIGH); setLnaCanControl(true); } diff --git a/variants/heltec_t096/LoRaFEMControl.h b/variants/heltec_t096/LoRaFEMControl.h index 2c50b742..fe61b7e4 100644 --- a/variants/heltec_t096/LoRaFEMControl.h +++ b/variants/heltec_t096/LoRaFEMControl.h @@ -16,6 +16,6 @@ class LoRaFEMControl void setLnaCanControl(bool can_control) { lna_can_control = can_control; } private: - bool lna_enabled = false; + bool lna_enabled = true; bool lna_can_control = false; }; diff --git a/variants/heltec_tracker_v2/LoRaFEMControl.cpp b/variants/heltec_tracker_v2/LoRaFEMControl.cpp index 3cf6c311..b846465d 100644 --- a/variants/heltec_tracker_v2/LoRaFEMControl.cpp +++ b/variants/heltec_tracker_v2/LoRaFEMControl.cpp @@ -14,7 +14,7 @@ void LoRaFEMControl::init(void) pinMode(P_LORA_KCT8103L_PA_CSD, OUTPUT); digitalWrite(P_LORA_KCT8103L_PA_CSD, HIGH); pinMode(P_LORA_KCT8103L_PA_CTX, OUTPUT); - digitalWrite(P_LORA_KCT8103L_PA_CTX, HIGH); + digitalWrite(P_LORA_KCT8103L_PA_CTX, lna_enabled ? LOW : HIGH); setLnaCanControl(true); } diff --git a/variants/heltec_tracker_v2/LoRaFEMControl.h b/variants/heltec_tracker_v2/LoRaFEMControl.h index 2c50b742..fe61b7e4 100644 --- a/variants/heltec_tracker_v2/LoRaFEMControl.h +++ b/variants/heltec_tracker_v2/LoRaFEMControl.h @@ -16,6 +16,6 @@ class LoRaFEMControl void setLnaCanControl(bool can_control) { lna_can_control = can_control; } private: - bool lna_enabled = false; + bool lna_enabled = true; bool lna_can_control = false; }; From ecd0cfc1c133aad93e65257f002151591f6bcfd9 Mon Sep 17 00:00:00 2001 From: liamcottle Date: Fri, 24 Apr 2026 15:57:34 +1200 Subject: [PATCH 27/54] update discord links --- README.md | 2 +- docs/faq.md | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/README.md b/README.md index ebad1f6f..f8b9e5e0 100644 --- a/README.md +++ b/README.md @@ -117,4 +117,4 @@ There are a number of fairly major features in the pipeline, with no particular - Report bugs and request features on the [GitHub Issues](https://github.com/ripplebiz/MeshCore/issues) page. - Find additional guides and components on [my site](https://buymeacoffee.com/ripplebiz). -- Join [MeshCore Discord](https://discord.gg/BMwCtwHj5V) to chat with the developers and get help from the community. +- Join [MeshCore Discord](https://meshcore.gg) to chat with the developers and get help from the community. diff --git a/docs/faq.md b/docs/faq.md index 9fe1534a..3edc0a69 100644 --- a/docs/faq.md +++ b/docs/faq.md @@ -194,7 +194,7 @@ Recently, as of October 2025, many regions have moved to the "narrow" setting, a After extensive testing, many regions have switched or about to switch over to BW62.5 and SF7, 8, or 9. Narrower bandwidth setting and lower SF setting allow MeshCore's radio signals to fit between interference in the ISM band, provide for a lower noise floor, better SNR, and faster transmissions. -If you have consensus from your community in your region to update your region's preset recommendation, please post your update request on the [#meshcore-app](https://discord.com/channels/1343693475589263471/1391681655911088241) channel on the [MeshCore Discord server ](https://discord.gg/cYtQNYCCRK) to let Liam Cottle know. +If you have consensus from your community in your region to update your region's preset recommendation, please post your update request on the [#meshcore-app](https://discord.com/channels/1343693475589263471/1391681655911088241) channel on the [MeshCore Discord server ](https://meshcore.gg) to let Liam Cottle know. @@ -526,7 +526,7 @@ The third character is the capital letter 'O', not zero `0` - Firmware repo: https://github.com/meshcore-dev/MeshCore ### 5.8. Q: How can I support MeshCore? -**A:** Provide your honest feedback on GitHub and on [MeshCore Discord server](https://discord.gg/BMwCtwHj5V). Spread the word of MeshCore to your friends and communities; help them get started with MeshCore. Support Scott's MeshCore development at . +**A:** Provide your honest feedback on GitHub and on [MeshCore Discord server](https://meshcore.gg). Spread the word of MeshCore to your friends and communities; help them get started with MeshCore. Support Scott's MeshCore development at . Support Liam Cottle's smartphone client development by unlocking the server administration wait gate with in-app purchase From 277331381e11ad70e0c62e58488252649e919c0c Mon Sep 17 00:00:00 2001 From: Kevin Le Date: Fri, 24 Apr 2026 11:56:06 +0700 Subject: [PATCH 28/54] Added Xiao S3 variant. This is for Xiao S3 and a normal Wio SX1262 for Xiao shield. --- variants/xiao_s3/XiaoS3Board.h | 13 +++ variants/xiao_s3/platformio.ini | 154 ++++++++++++++++++++++++++++++++ variants/xiao_s3/target.cpp | 56 ++++++++++++ variants/xiao_s3/target.h | 30 +++++++ 4 files changed, 253 insertions(+) create mode 100644 variants/xiao_s3/XiaoS3Board.h create mode 100644 variants/xiao_s3/platformio.ini create mode 100644 variants/xiao_s3/target.cpp create mode 100644 variants/xiao_s3/target.h diff --git a/variants/xiao_s3/XiaoS3Board.h b/variants/xiao_s3/XiaoS3Board.h new file mode 100644 index 00000000..288fcf62 --- /dev/null +++ b/variants/xiao_s3/XiaoS3Board.h @@ -0,0 +1,13 @@ +#pragma once + +#include +#include + +class XiaoS3Board : public ESP32Board { +public: + XiaoS3Board() { } + + const char* getManufacturerName() const override { + return "Xiao S3"; + } +}; diff --git a/variants/xiao_s3/platformio.ini b/variants/xiao_s3/platformio.ini new file mode 100644 index 00000000..bc000220 --- /dev/null +++ b/variants/xiao_s3/platformio.ini @@ -0,0 +1,154 @@ +[Xiao_S3] +extends = esp32_base +board = seeed_xiao_esp32s3 +board_check = true +board_build.mcu = esp32s3 +build_flags = ${esp32_base.build_flags} + ${sensor_base.build_flags} + -I variants/xiao_s3 + -UENV_INCLUDE_GPS + -D SEEED_XIAO_S3 + -D PIN_VBAT_READ=1 ; D0 + -D P_LORA_DIO_1=2 ; D1 + -D P_LORA_NSS=5 ; D4 + -D P_LORA_RESET=3 ; D2 + -D P_LORA_BUSY=4 ; D3 + -D P_LORA_SCLK=7 ; D8 + -D P_LORA_MISO=8 ; D0 + -D P_LORA_MOSI=9 ; D10 + -D PIN_USER_BTN=-1 ; NC + -D PIN_STATUS_LED=21 ; Orange user led, LOW=On + -D PIN_BOARD_SDA=D6 ; D6=43 + -D PIN_BOARD_SCL=D7 ; D7=44 + -D SX126X_RXEN=6 ; D5 + -D SX126X_TXEN=RADIOLIB_NC + -D SX126X_DIO2_AS_RF_SWITCH=true + -D SX126X_DIO3_TCXO_VOLTAGE=1.8 + -D SX126X_CURRENT_LIMIT=140 + -D RADIO_CLASS=CustomSX1262 + -D WRAPPER_CLASS=CustomSX1262Wrapper + -D LORA_TX_POWER=22 + -D SX126X_RX_BOOSTED_GAIN=1 +build_src_filter = ${esp32_base.build_src_filter} + +<../variants/xiao_s3> + + +lib_deps = + ${esp32_base.lib_deps} + ${sensor_base.lib_deps} + +[env:Xiao_S3_repeater] +extends = Xiao_S3 +build_src_filter = ${Xiao_S3.build_src_filter} + +<../examples/simple_repeater/*.cpp> +build_flags = + ${Xiao_S3.build_flags} + -D ADVERT_NAME='"Xiao S3 Repeater"' + -D ADVERT_LAT=0.0 + -D ADVERT_LON=0.0 + -D ADMIN_PASSWORD='"password"' + -D MAX_NEIGHBOURS=50 +; -D MESH_PACKET_LOGGING=1 +; -D MESH_DEBUG=1 +lib_deps = + ${Xiao_S3.lib_deps} + ${esp32_ota.lib_deps} + +[env:Xiao_S3_repeater_bridge_espnow] +extends = Xiao_S3 +build_src_filter = ${Xiao_S3.build_src_filter} + + + +<../examples/simple_repeater/*.cpp> +build_flags = + ${Xiao_S3.build_flags} + -D ADVERT_NAME='"ESPNow Bridge"' + -D ADVERT_LAT=0.0 + -D ADVERT_LON=0.0 + -D ADMIN_PASSWORD='"password"' + -D MAX_NEIGHBOURS=50 + -D WITH_ESPNOW_BRIDGE=1 +; -D BRIDGE_DEBUG=1 +; -D MESH_PACKET_LOGGING=1 +; -D MESH_DEBUG=1 +lib_deps = + ${Xiao_S3.lib_deps} + ${esp32_ota.lib_deps} + +[env:Xiao_S3_room_server] +extends = Xiao_S3 +build_src_filter = ${Xiao_S3.build_src_filter} + +<../examples/simple_room_server> +build_flags = + ${Xiao_S3.build_flags} + -D ADVERT_NAME='"Xiao S3 Room"' + -D ADVERT_LAT=0.0 + -D ADVERT_LON=0.0 + -D ADMIN_PASSWORD='"password"' + -D ROOM_PASSWORD='"hello"' +; -D MESH_PACKET_LOGGING=1 +; -D MESH_DEBUG=1 +lib_deps = + ${Xiao_S3.lib_deps} + ${esp32_ota.lib_deps} + +[env:Xiao_S3_companion_radio_ble] +extends = Xiao_S3 +build_flags = + ${Xiao_S3.build_flags} + -I examples/companion_radio/ui-new + -D MAX_CONTACTS=350 + -D MAX_GROUP_CHANNELS=40 + -D BLE_PIN_CODE=123456 + -D DISPLAY_CLASS=SSD1306Display + -D OFFLINE_QUEUE_SIZE=256 +; -D BLE_DEBUG_LOGGING=1 +; -D MESH_PACKET_LOGGING=1 +; -D MESH_DEBUG=1 +build_src_filter = ${Xiao_S3.build_src_filter} + + + + + + + +<../examples/companion_radio/*.cpp> + +<../examples/companion_radio/ui-new/*.cpp> +lib_deps = + ${Xiao_S3.lib_deps} + densaugeo/base64 @ ~1.4.0 + adafruit/Adafruit SSD1306 @ ^2.5.13 + +[env:Xiao_S3_companion_radio_usb] +extends = Xiao_S3 +build_flags = + ${Xiao_S3.build_flags} + -I examples/companion_radio/ui-new + -D MAX_CONTACTS=350 + -D MAX_GROUP_CHANNELS=40 + -D DISPLAY_CLASS=SSD1306Display + -D OFFLINE_QUEUE_SIZE=256 +; -D BLE_DEBUG_LOGGING=1 +; -D MESH_PACKET_LOGGING=1 +; -D MESH_DEBUG=1 +build_src_filter = ${Xiao_S3.build_src_filter} + + + + + + + +<../examples/companion_radio/*.cpp> + +<../examples/companion_radio/ui-new/*.cpp> +lib_deps = + ${Xiao_S3.lib_deps} + densaugeo/base64 @ ~1.4.0 + adafruit/Adafruit SSD1306 @ ^2.5.13 + +[env:Xiao_S3_sensor] +extends = Xiao_S3 +build_src_filter = ${Xiao_S3.build_src_filter} + +<../examples/simple_sensor> +build_flags = + ${Xiao_S3.build_flags} + -D ADVERT_NAME='"Xiao S3 Sensor"' + -D ADVERT_LAT=0.0 + -D ADVERT_LON=0.0 + -D ADMIN_PASSWORD='"password"' +; -D MESH_PACKET_LOGGING=1 +; -D MESH_DEBUG=1 +lib_deps = + ${Xiao_S3.lib_deps} + ${esp32_ota.lib_deps} \ No newline at end of file diff --git a/variants/xiao_s3/target.cpp b/variants/xiao_s3/target.cpp new file mode 100644 index 00000000..014b2552 --- /dev/null +++ b/variants/xiao_s3/target.cpp @@ -0,0 +1,56 @@ +#include +#include "target.h" + +XiaoS3Board board; + +#if defined(P_LORA_SCLK) + static SPIClass spi; + RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi); +#else + RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY); +#endif + +WRAPPER_CLASS radio_driver(radio, board); + +ESP32RTCClock fallback_clock; +AutoDiscoverRTCClock rtc_clock(fallback_clock); +EnvironmentSensorManager sensors; + +#ifdef DISPLAY_CLASS + DISPLAY_CLASS display; + MomentaryButton user_btn(PIN_USER_BTN, 1000, true); +#endif + +bool radio_init() { + fallback_clock.begin(); + rtc_clock.begin(Wire); + pinMode(21, INPUT); + pinMode(48, OUTPUT); + + #if defined(P_LORA_SCLK) + spi.begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI); + return radio.std_init(&spi); +#else + return radio.std_init(); +#endif +} + +uint32_t radio_get_rng_seed() { + return radio.random(0x7FFFFFFF); +} + +void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { + radio.setFrequency(freq); + radio.setSpreadingFactor(sf); + radio.setBandwidth(bw); + radio.setCodingRate(cr); +} + +void radio_set_tx_power(int8_t dbm) { + radio.setOutputPower(dbm); +} + +mesh::LocalIdentity radio_new_identity() { + RadioNoiseListener rng(radio); + return mesh::LocalIdentity(&rng); // create new random identity +} diff --git a/variants/xiao_s3/target.h b/variants/xiao_s3/target.h new file mode 100644 index 00000000..93b27862 --- /dev/null +++ b/variants/xiao_s3/target.h @@ -0,0 +1,30 @@ +#pragma once + +#define RADIOLIB_STATIC_ONLY 1 +#include +#include +#include +#include +#include +#include +#ifdef DISPLAY_CLASS + #include + #include +#endif +#include "XiaoS3Board.h" + +extern XiaoS3Board board; +extern WRAPPER_CLASS radio_driver; +extern AutoDiscoverRTCClock rtc_clock; +extern EnvironmentSensorManager sensors; + +#ifdef DISPLAY_CLASS + extern DISPLAY_CLASS display; + extern MomentaryButton user_btn; +#endif + +bool radio_init(); +uint32_t radio_get_rng_seed(); +void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); +void radio_set_tx_power(int8_t dbm); +mesh::LocalIdentity radio_new_identity(); From b705d5489f136477a93f13b9e407277903717787 Mon Sep 17 00:00:00 2001 From: zjs81 Date: Fri, 24 Apr 2026 04:24:20 -0700 Subject: [PATCH 29/54] Update companion protocol documentation and enhance data type definitions for clarity --- docs/companion_protocol.md | 135 +++++++++++++++++++++++++++-------- src/helpers/TxtDataHelpers.h | 3 + 2 files changed, 109 insertions(+), 29 deletions(-) diff --git a/docs/companion_protocol.md b/docs/companion_protocol.md index bbad1e40..fc2ad32d 100644 --- a/docs/companion_protocol.md +++ b/docs/companion_protocol.md @@ -283,32 +283,101 @@ Bytes 7+: Message Text (UTF-8, variable length) ### 6. Send Channel Data Datagram -**Purpose**: Send binary datagram data to a channel. +**Purpose**: Send a binary datagram to a channel. Unlike channel text messages, datagrams carry no built-in sender identity and no timestamp — applications needing either must encode them inside the binary payload. **Command Format**: ``` -Byte 0: 0x3E -Bytes 1-2: Data Type (`data_type`, 16-bit little-endian) -Byte 3: Channel Index (0-7) -Bytes 4+: Binary payload bytes (variable length) +Byte 0: 0x3E +Byte 1: Channel Index (0-7) +Byte 2: Path Length (0xFF = flood, otherwise actual path length) +Bytes 3 .. 2+path_len: Path (omitted when path_len == 0xFF) +Next 2 bytes (little-endian): Data Type (`data_type`, uint16) +Remaining bytes: Binary payload (variable length) +``` + +**Example** (flood, `DATA_TYPE_DEV`, payload `A1 B2 C3`, channel 1): +``` +3E 01 FF FF FF A1 B2 C3 ``` **Data Type / Transport Mapping**: -- `0x0000` is invalid for this command. +- `0x0000` (`DATA_TYPE_RESERVED`) is invalid and rejected with `PACKET_ERROR`. - `0xFFFF` (`DATA_TYPE_DEV`) is the developer namespace for experimenting and developing apps. -- Other non-zero values can be used as assigned application/community namespaces. - -**Note**: Applications that need a timestamp should encode it inside the binary payload. +- Values `0x0001`–`0xFFFE` are available for registered application/community namespaces. See the [Registered data_type values](#registered-data_type-values) table below. **Limits**: -- Maximum payload length is `163` bytes. -- Larger payloads are rejected with `PACKET_ERROR`. +- Maximum payload length is `MAX_CHANNEL_DATA_LENGTH = MAX_FRAME_SIZE - 9 = 163` bytes. +- Larger payloads are rejected with `PACKET_ERROR` (`ERR_CODE_ILLEGAL_ARG`). -**Response**: `PACKET_OK` (0x00) on success +**Response**: `PACKET_OK` (0x00) on success, or `PACKET_ERROR` (0x01) with one of: +- `ERR_CODE_NOT_FOUND` (2) — unknown `channel_idx` +- `ERR_CODE_ILLEGAL_ARG` (6) — invalid `path_len`, reserved `data_type` (`0x0000`), or payload larger than `MAX_CHANNEL_DATA_LENGTH` +- `ERR_CODE_TABLE_FULL` (3) — outbound send queue is full; retry later + +**Inbound datagrams** are delivered to the host via `RESP_CODE_CHANNEL_DATA_RECV` (0x1B); see [Receive Channel Data Datagram](#receive-channel-data-datagram). + +#### Registered `data_type` values + +Declared in `src/helpers/TxtDataHelpers.h`. These values have agreed-upon payload schemas so different client apps on the same channel can interoperate. + +| Value | Constant | Purpose | Payload schema | +|--------|----------------------|---------------------------------------------|--------------------------------------------------------------------------------------------------------| +| 0x0000 | `DATA_TYPE_RESERVED` | Reserved; invalid on send | — | +| 0x0001 | `DATA_TYPE_SMAZ_TEXT`| Raw SMAZ-compressed UTF-8 text | `[sender_name_len: u8][sender_name: UTF-8 × sender_name_len][smaz_bytes: remaining]` | +| 0x0002 | `DATA_TYPE_GIPHY_GIF`| Giphy GIF id (avoids base64 tax) | `[sender_name_len: u8][sender_name: UTF-8 × sender_name_len][giphy_id: ASCII, remaining]` | +| 0x0003 | `DATA_TYPE_REACTION` | Emoji reaction targeting a prior message | `[target_hash: 2 bytes LE][emoji_index: u8][sender_name_len: u8][sender_name: UTF-8 × sender_name_len]` | +| 0xFFFF | `DATA_TYPE_DEV` | Developer/experimental namespace | Application-defined | + +The firmware does not inspect the payload contents — `data_type` is transported opaquely, and the schemas above are a client-side contract between cooperating apps. + +To request a new registered value, submit a PR adding a `#define` to `TxtDataHelpers.h` and a row to this table. --- -### 6. Get Message +### Receive Channel Data Datagram + +Inbound group datagrams (radio-level `PAYLOAD_TYPE_GRP_DATA`, 0x06) are forwarded to the host as `RESP_CODE_CHANNEL_DATA_RECV` notifications. + +**Frame Format** (`RESP_CODE_CHANNEL_DATA_RECV`, 0x1B): +``` +Byte 0: 0x1B (packet type) +Byte 1: SNR (signed int8, scaled ×4 — divide by 4.0 to recover dB) +Bytes 2-3: Reserved +Byte 4: Channel Index (0-7) +Byte 5: Path Length (actual path when flooded, otherwise 0xFF) +Bytes 6-7: Data Type (uint16 little-endian) +Byte 8: Data Length +Bytes 9 .. 8+data_len: Payload +``` + +**Note**: The device may also emit `PACKET_MESSAGES_WAITING` (0x83) to notify the host that datagrams are queued; poll with `CMD_SYNC_NEXT_MESSAGE` (0x0A) to retrieve them. + +**Parsing Pseudocode**: +```python +def parse_channel_data_recv(data): + if len(data) < 9: + return None + snr_byte = data[1] + snr = (snr_byte if snr_byte < 128 else snr_byte - 256) / 4.0 + channel_idx = data[4] + path_len = data[5] + data_type = int.from_bytes(data[6:8], 'little') + data_len = data[8] + if 9 + data_len > len(data): + return None + payload = data[9:9 + data_len] + return { + 'snr': snr, + 'channel_idx': channel_idx, + 'path_len': path_len, + 'data_type': data_type, + 'payload': bytes(payload), + } +``` + +--- + +### 7. Get Message **Purpose**: Request the next queued message from the device. @@ -325,13 +394,14 @@ Byte 0: 0x0A **Response**: - `PACKET_CHANNEL_MSG_RECV` (0x08) or `PACKET_CHANNEL_MSG_RECV_V3` (0x11) for channel messages - `PACKET_CONTACT_MSG_RECV` (0x07) or `PACKET_CONTACT_MSG_RECV_V3` (0x10) for contact messages +- `PACKET_CHANNEL_DATA_RECV` (0x1B) for channel data datagrams - `PACKET_NO_MORE_MSGS` (0x0A) if no messages available **Note**: Poll this command periodically to retrieve queued messages. The device may also send `PACKET_MESSAGES_WAITING` (0x83) as a notification when messages are available. --- -### 7. Get Battery and Storage +### 8. Get Battery and Storage **Purpose**: Query device battery voltage and storage usage. @@ -527,6 +597,15 @@ Use the `SEND_CHANNEL_MESSAGE` command (see [Commands](#commands)). ## Response Parsing +### Terminology + +This document uses a spec-level naming convention (`PACKET_*`) for bytes the firmware sends back to the host. In the firmware source these same values are split across two `#define` families by purpose: + +- `RESP_CODE_*` — direct replies to a command (e.g. `RESP_CODE_CHANNEL_DATA_RECV` = `PACKET_CHANNEL_DATA_RECV` = 0x1B). +- `PUSH_CODE_*` — asynchronous notifications not tied to a specific command (e.g. `PUSH_CODE_MSG_WAITING` = `PACKET_MESSAGES_WAITING` = 0x83). + +Byte values are authoritative; names are aliases. When reading firmware source, `RESP_CODE_X` / `PUSH_CODE_X` correspond to this doc's `PACKET_X` of the same numeric value. + ### Packet Types | Value | Name | Description | @@ -547,6 +626,7 @@ Use the `SEND_CHANNEL_MESSAGE` command (see [Commands](#commands)). | 0x10 | PACKET_CONTACT_MSG_RECV_V3 | Contact message (V3 with SNR) | | 0x11 | PACKET_CHANNEL_MSG_RECV_V3 | Channel message (V3 with SNR) | | 0x12 | PACKET_CHANNEL_INFO | Channel information | +| 0x1B | PACKET_CHANNEL_DATA_RECV | Channel data datagram | | 0x80 | PACKET_ADVERTISEMENT | Advertisement packet | | 0x82 | PACKET_ACK | Acknowledgment | | 0x83 | PACKET_MESSAGES_WAITING | Messages waiting notification | @@ -718,22 +798,18 @@ Bytes 1-6: ACK Code (6 bytes, hex) ### Error Codes -**PACKET_ERROR** (0x01) may include an error code in byte 1: +`PACKET_ERROR` (0x01) carries a single-byte error code in byte 1. Values match the `ERR_CODE_*` constants defined in `examples/companion_radio/MyMesh.cpp`: -| Error Code | Description | -|------------|-------------| -| 0x00 | Generic error (no specific code) | -| 0x01 | Invalid command | -| 0x02 | Invalid parameter | -| 0x03 | Channel not found | -| 0x04 | Channel already exists | -| 0x05 | Channel index out of range | -| 0x06 | Secret mismatch | -| 0x07 | Message too long | -| 0x08 | Device busy | -| 0x09 | Not enough storage | +| Code | Constant (firmware) | Description | +|------|----------------------------|------------------------------------------------------------------------------| +| 1 | `ERR_CODE_UNSUPPORTED_CMD` | Unknown or unsupported command byte / sub-command | +| 2 | `ERR_CODE_NOT_FOUND` | Target not found (channel, contact, message, etc.) | +| 3 | `ERR_CODE_TABLE_FULL` | Internal queue or table is full — retry later | +| 4 | `ERR_CODE_BAD_STATE` | Operation not valid in current device state (e.g. iterator already running) | +| 5 | `ERR_CODE_FILE_IO_ERROR` | Filesystem or storage I/O failure | +| 6 | `ERR_CODE_ILLEGAL_ARG` | Invalid argument (bad length, out-of-range value, reserved field, etc.) | -**Note**: Error codes may vary by firmware version. Always check byte 1 of `PACKET_ERROR` response. +**Note**: Error codes may vary by firmware version. Always check byte 1 of `PACKET_ERROR` response, and treat unknown codes as generic errors. ### Frame Handling @@ -765,7 +841,8 @@ BLE implementations enqueue and deliver one protocol frame per BLE write/notific - `GET_CHANNEL` → `PACKET_CHANNEL_INFO` - `SET_CHANNEL` → `PACKET_OK` or `PACKET_ERROR` - `SEND_CHANNEL_MESSAGE` → `PACKET_MSG_SENT` - - `GET_MESSAGE` → `PACKET_CHANNEL_MSG_RECV`, `PACKET_CONTACT_MSG_RECV`, or `PACKET_NO_MORE_MSGS` + - `GET_MESSAGE` → `PACKET_CHANNEL_MSG_RECV`, `PACKET_CONTACT_MSG_RECV`, `PACKET_CHANNEL_DATA_RECV`, or `PACKET_NO_MORE_MSGS` + - `SEND_CHANNEL_DATA` → `PACKET_OK` or `PACKET_ERROR` - `GET_BATTERY` → `PACKET_BATTERY` 4. **Timeout Handling**: diff --git a/src/helpers/TxtDataHelpers.h b/src/helpers/TxtDataHelpers.h index ece494f2..432c0f12 100644 --- a/src/helpers/TxtDataHelpers.h +++ b/src/helpers/TxtDataHelpers.h @@ -7,6 +7,9 @@ #define TXT_TYPE_CLI_DATA 1 // a CLI command #define TXT_TYPE_SIGNED_PLAIN 2 // plain text, signed by sender #define DATA_TYPE_RESERVED 0x0000 // reserved for future use +#define DATA_TYPE_SMAZ_TEXT 0x0001 // raw SMAZ-compressed UTF-8 text meshcore-open Flutter client. +#define DATA_TYPE_GIPHY_GIF 0x0002 // ASCII Giphy GIF id meshcore-open Flutter client. +#define DATA_TYPE_REACTION 0x0003 // 2-byte target message hash + 1-byte emoji index meshcore-open Flutter client. #define DATA_TYPE_DEV 0xFFFF // developer namespace for experimenting with group/channel datagrams and building apps class StrHelper { From 5e03c00397263ef17e8d3c132db13abe3cb3acb8 Mon Sep 17 00:00:00 2001 From: Michael Lynch Date: Sun, 12 Oct 2025 11:11:05 -0400 Subject: [PATCH 30/54] Add unit tests for Utils::toHex --- .github/workflows/run-unit-tests.yml | 31 +++++++++++++++ README.md | 8 ++++ platformio.ini | 14 +++++++ test/mocks/AES.h | 13 +++++++ test/mocks/SHA256.h | 14 +++++++ test/mocks/Stream.h | 10 +++++ test/test_utils/test_tohex.cpp | 57 ++++++++++++++++++++++++++++ 7 files changed, 147 insertions(+) create mode 100644 .github/workflows/run-unit-tests.yml create mode 100644 test/mocks/AES.h create mode 100644 test/mocks/SHA256.h create mode 100644 test/mocks/Stream.h create mode 100644 test/test_utils/test_tohex.cpp diff --git a/.github/workflows/run-unit-tests.yml b/.github/workflows/run-unit-tests.yml new file mode 100644 index 00000000..e3af3aaf --- /dev/null +++ b/.github/workflows/run-unit-tests.yml @@ -0,0 +1,31 @@ +name: Run Unit Tests + +on: + push: + branches: + - main + - master + pull_request: + workflow_dispatch: + +jobs: + test: + runs-on: ubuntu-latest + steps: + + - name: Clone Repo + uses: actions/checkout@v4 + + - name: Setup Build Environment + uses: ./.github/actions/setup-build-environment + + - name: Run Unit Tests + run: pio test -e native -vv + + - name: Upload Test Results + # Upload test results even if the test step failed. + if: always() + uses: actions/upload-artifact@v4 + with: + name: test-results + path: .pio/build/native/ diff --git a/README.md b/README.md index ebad1f6f..70007c7b 100644 --- a/README.md +++ b/README.md @@ -98,6 +98,14 @@ Here are some general principals you should try to adhere to: Help us prioritize! Please react with thumbs-up to issues/PRs you care about most. We look at reaction counts when planning work. +### Running unit tests + +To run unit tests, run the following command: + +```bash +pio test --environment native --verbose +``` + ## Road-Map / To-Do There are a number of fairly major features in the pipeline, with no particular time-frames attached yet. In very rough chronological order: diff --git a/platformio.ini b/platformio.ini index 864e5e1f..35b3534e 100644 --- a/platformio.ini +++ b/platformio.ini @@ -151,3 +151,17 @@ lib_deps = stevemarple/MicroNMEA @ ^2.0.6 adafruit/Adafruit BME680 Library @ ^2.0.4 adafruit/Adafruit BMP085 Library @ ^1.2.4 + +; ----------------- TESTING --------------------- + +[env:native] +platform = native +build_flags = -std=c++14 + -I src + -I test/mocks +test_build_src = yes +build_src_filter = + -<*> + +<../src/Utils.cpp> +lib_deps = + google/googletest @ ^1.15.2 diff --git a/test/mocks/AES.h b/test/mocks/AES.h new file mode 100644 index 00000000..678b7c13 --- /dev/null +++ b/test/mocks/AES.h @@ -0,0 +1,13 @@ +#pragma once + +#include +#include + +// Mock AES128 class for testing +// Provides minimal interface to allow Utils.cpp to compile +class AES128 { +public: + void setKey(const uint8_t* key, size_t keySize) {} + void encryptBlock(uint8_t* output, const uint8_t* input) {} + void decryptBlock(uint8_t* output, const uint8_t* input) {} +}; diff --git a/test/mocks/SHA256.h b/test/mocks/SHA256.h new file mode 100644 index 00000000..b6e551a0 --- /dev/null +++ b/test/mocks/SHA256.h @@ -0,0 +1,14 @@ +#pragma once + +#include +#include + +// Mock SHA256 class for testing +// Provides minimal interface to allow Utils.cpp to compile +class SHA256 { +public: + void update(const uint8_t* data, size_t len) {} + void finalize(uint8_t* hash, size_t hashLen) {} + void resetHMAC(const uint8_t* key, size_t keyLen) {} + void finalizeHMAC(const uint8_t* key, size_t keyLen, uint8_t* hash, size_t hashLen) {} +}; diff --git a/test/mocks/Stream.h b/test/mocks/Stream.h new file mode 100644 index 00000000..195a3029 --- /dev/null +++ b/test/mocks/Stream.h @@ -0,0 +1,10 @@ +#pragma once + +// Mock Stream class for native testing +// Provides minimal interface needed by Utils.h + +class Stream { +public: + virtual void print(char c) {} + virtual void print(const char* str) {} +}; diff --git a/test/test_utils/test_tohex.cpp b/test/test_utils/test_tohex.cpp new file mode 100644 index 00000000..fec3ae48 --- /dev/null +++ b/test/test_utils/test_tohex.cpp @@ -0,0 +1,57 @@ +#include +#include "Utils.h" + +using namespace mesh; + +#define HEX_BUFFER_SIZE(input) (sizeof(input) * 2 + 1) + +TEST(UtilsToHex, ConvertSingleByte) { + uint8_t input[] = {0xAB}; + char output[HEX_BUFFER_SIZE(input)]; + + Utils::toHex(output, input, sizeof(input)); + + EXPECT_STREQ("AB", output); +} + +TEST(UtilsToHex, ConvertMultipleBytes) { + uint8_t input[] = {0x01, 0x23, 0x45, 0x67, 0x89, 0xAB, 0xCD, 0xEF}; + char output[HEX_BUFFER_SIZE(input)]; + + Utils::toHex(output, input, sizeof(input)); + + EXPECT_STREQ("0123456789ABCDEF", output); +} + +TEST(UtilsToHex, ConvertZeroByte) { + uint8_t input[] = {0x00}; + char output[HEX_BUFFER_SIZE(input)]; + + Utils::toHex(output, input, sizeof(input)); + + EXPECT_STREQ("00", output); +} + +TEST(UtilsToHex, ConvertMaxByte) { + uint8_t input[] = {0xFF}; + char output[HEX_BUFFER_SIZE(input)]; + + Utils::toHex(output, input, sizeof(input)); + + EXPECT_STREQ("FF", output); +} + +TEST(UtilsToHex, NullTerminatesOnEmptyInput) { + uint8_t input[] = {0xAB}; + char output[] = "X"; // Pre-fill with X. + + Utils::toHex(output, input, 0); + + // Should just null-terminate at position 0 + EXPECT_EQ('\0', output[0]); +} + +int main(int argc, char **argv) { + ::testing::InitGoogleTest(&argc, argv); + return RUN_ALL_TESTS(); +} From b6a3aa1bfe5eed320967efacc8ccc5186a44b0a3 Mon Sep 17 00:00:00 2001 From: Michael Lynch Date: Fri, 24 Apr 2026 16:17:23 -0400 Subject: [PATCH 31/54] Update googletest to use 1.17.0 exactly With the '^x.y.z' semantics, the version can upgrade out from under us and change dependencies, so this pins to an exact version. --- platformio.ini | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/platformio.ini b/platformio.ini index 35b3534e..35a985f0 100644 --- a/platformio.ini +++ b/platformio.ini @@ -156,7 +156,7 @@ lib_deps = [env:native] platform = native -build_flags = -std=c++14 +build_flags = -std=c++17 -I src -I test/mocks test_build_src = yes @@ -164,4 +164,4 @@ build_src_filter = -<*> +<../src/Utils.cpp> lib_deps = - google/googletest @ ^1.15.2 + google/googletest @ 1.17.0 From 7f38e3f145fd758f0bccc8befa7004fcda9bb376 Mon Sep 17 00:00:00 2001 From: zevaryx Date: Fri, 24 Apr 2026 20:24:50 -0600 Subject: [PATCH 32/54] feat: Enable GPS on RAK 1W kit --- variants/rak3401/platformio.ini | 2 ++ 1 file changed, 2 insertions(+) diff --git a/variants/rak3401/platformio.ini b/variants/rak3401/platformio.ini index 3d2d4a3e..b3693a58 100644 --- a/variants/rak3401/platformio.ini +++ b/variants/rak3401/platformio.ini @@ -6,6 +6,7 @@ build_flags = ${nrf52_base.build_flags} ${sensor_base.build_flags} -I variants/rak3401 -D RAK_3401 + -D RAK_BOARD -D NRF52_POWER_MANAGEMENT -D RADIO_CLASS=CustomSX1262 -D WRAPPER_CLASS=CustomSX1262Wrapper @@ -82,6 +83,7 @@ board_upload.maximum_size = 712704 build_flags = ${rak3401.build_flags} -I examples/companion_radio/ui-new + -D PIN_GPS_EN=-1 -D DISPLAY_CLASS=SSD1306Display -D MAX_CONTACTS=350 -D MAX_GROUP_CHANNELS=40 From 835b0e9114985ed800d67d4f4d52cd8eccee88c5 Mon Sep 17 00:00:00 2001 From: Confi <9595028+Confituurke@users.noreply.github.com> Date: Sat, 25 Apr 2026 09:47:44 +0200 Subject: [PATCH 33/54] fix(sensecap_solar): init LED_WHITE LOW to prevent always-on at boot --- variants/sensecap_solar/SenseCapSolarBoard.cpp | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/variants/sensecap_solar/SenseCapSolarBoard.cpp b/variants/sensecap_solar/SenseCapSolarBoard.cpp index d713176d..da7964c9 100644 --- a/variants/sensecap_solar/SenseCapSolarBoard.cpp +++ b/variants/sensecap_solar/SenseCapSolarBoard.cpp @@ -49,7 +49,7 @@ void SenseCapSolarBoard::begin() { #ifdef LED_WHITE pinMode(LED_WHITE, OUTPUT); - digitalWrite(LED_WHITE, HIGH); + digitalWrite(LED_WHITE, LOW); #endif #ifdef LED_BLUE pinMode(LED_BLUE, OUTPUT); From b91f127e4ebbdca0fa728e1feed9dc4fca4dc761 Mon Sep 17 00:00:00 2001 From: me Date: Sun, 26 Apr 2026 00:23:09 -0700 Subject: [PATCH 34/54] fix: correct device model name for Heltec Wireless Paper --- variants/heltec_wireless_paper/target.cpp | 2 +- variants/heltec_wireless_paper/target.h | 8 +++++++- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/variants/heltec_wireless_paper/target.cpp b/variants/heltec_wireless_paper/target.cpp index ffb042cf..83e73332 100644 --- a/variants/heltec_wireless_paper/target.cpp +++ b/variants/heltec_wireless_paper/target.cpp @@ -1,7 +1,7 @@ #include "target.h" #include -HeltecV3Board board; +HeltecWirelessPaperBoard board; #if defined(P_LORA_SCLK) static SPIClass spi; diff --git a/variants/heltec_wireless_paper/target.h b/variants/heltec_wireless_paper/target.h index 661da5e4..47908314 100644 --- a/variants/heltec_wireless_paper/target.h +++ b/variants/heltec_wireless_paper/target.h @@ -4,6 +4,12 @@ #include #include #include <../heltec_v3/HeltecV3Board.h> +class HeltecWirelessPaperBoard : public HeltecV3Board { +public: + const char* getManufacturerName() const override { + return "Heltec Wireless Paper"; + } +}; #include #include #include @@ -12,7 +18,7 @@ #include #endif -extern HeltecV3Board board; +extern HeltecWirelessPaperBoard board; extern WRAPPER_CLASS radio_driver; extern AutoDiscoverRTCClock rtc_clock; extern SensorManager sensors; From b6d0b7a5dd06d3e141e089697ddb44dd154dcc15 Mon Sep 17 00:00:00 2001 From: zjs81 Date: Mon, 27 Apr 2026 10:22:17 -0700 Subject: [PATCH 35/54] Refine data type definitions and update registration process in documentation --- docs/companion_protocol.md | 20 +++++++++----------- docs/number_allocations.md | 1 + src/helpers/TxtDataHelpers.h | 3 --- 3 files changed, 10 insertions(+), 14 deletions(-) diff --git a/docs/companion_protocol.md b/docs/companion_protocol.md index fc2ad32d..8129bc90 100644 --- a/docs/companion_protocol.md +++ b/docs/companion_protocol.md @@ -318,19 +318,17 @@ Remaining bytes: Binary payload (variable length) #### Registered `data_type` values -Declared in `src/helpers/TxtDataHelpers.h`. These values have agreed-upon payload schemas so different client apps on the same channel can interoperate. +`data_type` is an **application identifier**, not a payload-format identifier. Each registered value identifies an application that owns its own internal payload schemas. The firmware does not inspect payload contents — `data_type` is transported opaquely. -| Value | Constant | Purpose | Payload schema | -|--------|----------------------|---------------------------------------------|--------------------------------------------------------------------------------------------------------| -| 0x0000 | `DATA_TYPE_RESERVED` | Reserved; invalid on send | — | -| 0x0001 | `DATA_TYPE_SMAZ_TEXT`| Raw SMAZ-compressed UTF-8 text | `[sender_name_len: u8][sender_name: UTF-8 × sender_name_len][smaz_bytes: remaining]` | -| 0x0002 | `DATA_TYPE_GIPHY_GIF`| Giphy GIF id (avoids base64 tax) | `[sender_name_len: u8][sender_name: UTF-8 × sender_name_len][giphy_id: ASCII, remaining]` | -| 0x0003 | `DATA_TYPE_REACTION` | Emoji reaction targeting a prior message | `[target_hash: 2 bytes LE][emoji_index: u8][sender_name_len: u8][sender_name: UTF-8 × sender_name_len]` | -| 0xFFFF | `DATA_TYPE_DEV` | Developer/experimental namespace | Application-defined | +| Value | Constant | Purpose | +|-----------------|----------------------|--------------------------------------------------------------------------| +| 0x0000 | `DATA_TYPE_RESERVED` | Reserved; invalid on send | +| 0x0001 – 0x00FF | — | Reserved for internal use | +| 0x0100 – 0xFEFF | — | Registered application namespaces (see [number_allocations.md](number_allocations.md)) | +| 0xFF00 – 0xFFFE | — | Testing/development; no registration required | +| 0xFFFF | `DATA_TYPE_DEV` | Developer/experimental namespace | -The firmware does not inspect the payload contents — `data_type` is transported opaquely, and the schemas above are a client-side contract between cooperating apps. - -To request a new registered value, submit a PR adding a `#define` to `TxtDataHelpers.h` and a row to this table. +To register a new application, submit a PR adding a row to the table in [docs/number_allocations.md](number_allocations.md). Internal sub-formats within an allocated application ID are owned by that application and are not tracked in MeshCore firmware or this document. --- diff --git a/docs/number_allocations.md b/docs/number_allocations.md index 94ad1efd..c4715c5e 100644 --- a/docs/number_allocations.md +++ b/docs/number_allocations.md @@ -15,6 +15,7 @@ Once you have a working app/project, you need to be able to demonstrate it exist | Data-Type range | App name | Contact | |-----------------|-----------------------------|------------------------------------------------------| | 0000 - 00FF | -reserved for internal use- | | +| 0100 | MeshCore Open | zsylvester@monitormx.com — https://github.com/zjs81/meshcore-open | | FF00 - FFFF | -reserved for testing/dev- | | (add rows, inside the range 0100 - FEFF for custom apps) diff --git a/src/helpers/TxtDataHelpers.h b/src/helpers/TxtDataHelpers.h index 432c0f12..ece494f2 100644 --- a/src/helpers/TxtDataHelpers.h +++ b/src/helpers/TxtDataHelpers.h @@ -7,9 +7,6 @@ #define TXT_TYPE_CLI_DATA 1 // a CLI command #define TXT_TYPE_SIGNED_PLAIN 2 // plain text, signed by sender #define DATA_TYPE_RESERVED 0x0000 // reserved for future use -#define DATA_TYPE_SMAZ_TEXT 0x0001 // raw SMAZ-compressed UTF-8 text meshcore-open Flutter client. -#define DATA_TYPE_GIPHY_GIF 0x0002 // ASCII Giphy GIF id meshcore-open Flutter client. -#define DATA_TYPE_REACTION 0x0003 // 2-byte target message hash + 1-byte emoji index meshcore-open Flutter client. #define DATA_TYPE_DEV 0xFFFF // developer namespace for experimenting with group/channel datagrams and building apps class StrHelper { From 9c8eb301a484413c358742f69d37ee32070ec01d Mon Sep 17 00:00:00 2001 From: zjs81 Date: Mon, 27 Apr 2026 10:49:55 -0700 Subject: [PATCH 36/54] Clarify path length semantics and data handling in inbound group datagrams --- docs/companion_protocol.md | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/docs/companion_protocol.md b/docs/companion_protocol.md index 8129bc90..9cc610ff 100644 --- a/docs/companion_protocol.md +++ b/docs/companion_protocol.md @@ -340,14 +340,25 @@ Inbound group datagrams (radio-level `PAYLOAD_TYPE_GRP_DATA`, 0x06) are forwarde ``` Byte 0: 0x1B (packet type) Byte 1: SNR (signed int8, scaled ×4 — divide by 4.0 to recover dB) -Bytes 2-3: Reserved +Bytes 2-3: Reserved (clients MUST ignore) Byte 4: Channel Index (0-7) -Byte 5: Path Length (actual path when flooded, otherwise 0xFF) +Byte 5: Path Length (actual path length when flooded, otherwise 0xFF for direct) Bytes 6-7: Data Type (uint16 little-endian) Byte 8: Data Length Bytes 9 .. 8+data_len: Payload ``` +**Path bytes are not forwarded**: Only `path_len` is reported in the receive frame — the path itself is not copied to the host. There are no path bytes between byte 5 and the data_type field at bytes 6–7, regardless of `path_len`. + +**Path Length semantics differ between send and receive**: + +| Direction | `path_len = 0xFF` | `path_len ≠ 0xFF` | +|-----------|---------------------------------|-------------------------------------------------------------------------------------| +| Send | Flood the network | Direct route; the encoded path follows (low 6 bits = hash count, top 2 bits + 1 = hash size; on-wire byte count = `hash_count × hash_size`) | +| Receive | Packet arrived via direct route | Packet was flooded; this is the encoded `pkt->path_len` field as observed (no path bytes follow) | + +In other words, the meaning of `0xFF` is inverted between the two directions, and on receive the field carries metadata only — never a routable path. `path_len` is an encoded byte (see `Packet::isValidPathLen` / `Packet::writePath` in `src/Packet.cpp`), not a raw byte count. + **Note**: The device may also emit `PACKET_MESSAGES_WAITING` (0x83) to notify the host that datagrams are queued; poll with `CMD_SYNC_NEXT_MESSAGE` (0x0A) to retrieve them. **Parsing Pseudocode**: From c8d81bc04ce826cd5a4227968aea50e0d8e450aa Mon Sep 17 00:00:00 2001 From: liamcottle Date: Tue, 28 Apr 2026 17:02:20 +1200 Subject: [PATCH 37/54] added website to repeater splash screen --- examples/simple_repeater/UITask.cpp | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/examples/simple_repeater/UITask.cpp b/examples/simple_repeater/UITask.cpp index acb46325..6a851438 100644 --- a/examples/simple_repeater/UITask.cpp +++ b/examples/simple_repeater/UITask.cpp @@ -52,17 +52,25 @@ void UITask::renderCurrScreen() { int logoWidth = 128; _display->drawXbm((_display->width() - logoWidth) / 2, 3, meshcore_logo, logoWidth, 13); + // meshcore website + const char* website = "https://meshcore.io"; + _display->setColor(DisplayDriver::LIGHT); + _display->setTextSize(1); + uint16_t websiteWidth = _display->getTextWidth(website); + _display->setCursor((_display->width() - websiteWidth) / 2, 22); + _display->print(website); + // version info _display->setColor(DisplayDriver::LIGHT); _display->setTextSize(1); uint16_t versionWidth = _display->getTextWidth(_version_info); - _display->setCursor((_display->width() - versionWidth) / 2, 22); + _display->setCursor((_display->width() - versionWidth) / 2, 35); _display->print(_version_info); // node type const char* node_type = "< Repeater >"; uint16_t typeWidth = _display->getTextWidth(node_type); - _display->setCursor((_display->width() - typeWidth) / 2, 35); + _display->setCursor((_display->width() - typeWidth) / 2, 48); _display->print(node_type); } else { // home screen // node name From 5f75b90ff9ca504f02f8953edfea29d35c135640 Mon Sep 17 00:00:00 2001 From: liamcottle Date: Tue, 28 Apr 2026 20:37:17 +1200 Subject: [PATCH 38/54] added website to companion splash screen --- examples/companion_radio/ui-new/UITask.cpp | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/examples/companion_radio/ui-new/UITask.cpp b/examples/companion_radio/ui-new/UITask.cpp index 94a8ee3e..dd93098c 100644 --- a/examples/companion_radio/ui-new/UITask.cpp +++ b/examples/companion_radio/ui-new/UITask.cpp @@ -57,13 +57,21 @@ public: int logoWidth = 128; display.drawXbm((display.width() - logoWidth) / 2, 3, meshcore_logo, logoWidth, 13); + // meshcore website + const char* website = "https://meshcore.io"; + display.setColor(DisplayDriver::LIGHT); + display.setTextSize(1); + uint16_t websiteWidth = display.getTextWidth(website); + display.setCursor((display.width() - websiteWidth) / 2, 22); + display.print(website); + // version info display.setColor(DisplayDriver::LIGHT); - display.setTextSize(2); - display.drawTextCentered(display.width()/2, 22, _version_info); + display.setTextSize(1); + display.drawTextCentered(display.width()/2, 35, _version_info); display.setTextSize(1); - display.drawTextCentered(display.width()/2, 42, FIRMWARE_BUILD_DATE); + display.drawTextCentered(display.width()/2, 48, FIRMWARE_BUILD_DATE); return 1000; } From 3cd40902b3d686d43941d8e868b0379757e0aa92 Mon Sep 17 00:00:00 2001 From: liamcottle Date: Tue, 28 Apr 2026 20:39:07 +1200 Subject: [PATCH 39/54] added website to room server splash screen --- examples/simple_room_server/UITask.cpp | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/examples/simple_room_server/UITask.cpp b/examples/simple_room_server/UITask.cpp index 42bc14d4..640a1d2d 100644 --- a/examples/simple_room_server/UITask.cpp +++ b/examples/simple_room_server/UITask.cpp @@ -52,17 +52,25 @@ void UITask::renderCurrScreen() { int logoWidth = 128; _display->drawXbm((_display->width() - logoWidth) / 2, 3, meshcore_logo, logoWidth, 13); + // meshcore website + const char* website = "https://meshcore.io"; + _display->setColor(DisplayDriver::LIGHT); + _display->setTextSize(1); + uint16_t websiteWidth = _display->getTextWidth(website); + _display->setCursor((_display->width() - websiteWidth) / 2, 22); + _display->print(website); + // version info _display->setColor(DisplayDriver::LIGHT); _display->setTextSize(1); uint16_t versionWidth = _display->getTextWidth(_version_info); - _display->setCursor((_display->width() - versionWidth) / 2, 22); + _display->setCursor((_display->width() - versionWidth) / 2, 35); _display->print(_version_info); // node type const char* node_type = "< Room Server >"; uint16_t typeWidth = _display->getTextWidth(node_type); - _display->setCursor((_display->width() - typeWidth) / 2, 35); + _display->setCursor((_display->width() - typeWidth) / 2, 48); _display->print(node_type); } else { // home screen // node name From e111f710647727d23a30a14b393b454909927ce3 Mon Sep 17 00:00:00 2001 From: liamcottle Date: Tue, 28 Apr 2026 20:40:13 +1200 Subject: [PATCH 40/54] added website to sensor splash screen --- examples/simple_sensor/UITask.cpp | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/examples/simple_sensor/UITask.cpp b/examples/simple_sensor/UITask.cpp index 0e78fee0..757ea1dc 100644 --- a/examples/simple_sensor/UITask.cpp +++ b/examples/simple_sensor/UITask.cpp @@ -52,17 +52,25 @@ void UITask::renderCurrScreen() { int logoWidth = 128; _display->drawXbm((_display->width() - logoWidth) / 2, 3, meshcore_logo, logoWidth, 13); + // meshcore website + const char* website = "https://meshcore.io"; + _display->setColor(DisplayDriver::LIGHT); + _display->setTextSize(1); + uint16_t websiteWidth = _display->getTextWidth(website); + _display->setCursor((_display->width() - websiteWidth) / 2, 22); + _display->print(website); + // version info _display->setColor(DisplayDriver::LIGHT); _display->setTextSize(1); uint16_t versionWidth = _display->getTextWidth(_version_info); - _display->setCursor((_display->width() - versionWidth) / 2, 22); + _display->setCursor((_display->width() - versionWidth) / 2, 35); _display->print(_version_info); // node type const char* node_type = "< Sensor >"; uint16_t typeWidth = _display->getTextWidth(node_type); - _display->setCursor((_display->width() - typeWidth) / 2, 35); + _display->setCursor((_display->width() - typeWidth) / 2, 48); _display->print(node_type); } else { // home screen // node name From 12d9cc37529fa949b7748a610a6e6cc76b59910c Mon Sep 17 00:00:00 2001 From: Rastislav Vysoky Date: Tue, 28 Apr 2026 12:24:45 +0200 Subject: [PATCH 41/54] make g2 more in line with other variants --- variants/nano_g2_ultra/platformio.ini | 65 +++++++++++++++++---------- 1 file changed, 42 insertions(+), 23 deletions(-) diff --git a/variants/nano_g2_ultra/platformio.ini b/variants/nano_g2_ultra/platformio.ini index 116a1f25..957c3802 100644 --- a/variants/nano_g2_ultra/platformio.ini +++ b/variants/nano_g2_ultra/platformio.ini @@ -1,20 +1,11 @@ -[nrf52840_g2_ultra] +[Nano_G2_Ultra] extends = nrf52_base -platform_packages = framework-arduinoadafruitnrf52 +board = nano-g2-ultra +board_build.ldscript = boards/nrf52840_s140_v6.ld build_flags = ${nrf52_base.build_flags} -I src/helpers/nrf52 -I lib/nrf52/s140_nrf52_6.1.1_API/include -I lib/nrf52/s140_nrf52_6.1.1_API/include/nrf52 -lib_deps = - ${nrf52_base.lib_deps} - rweather/Crypto @ ^0.4.0 - lewisxhe/PCF8563_Library@^1.0.1 - -[Nano_G2_Ultra] -extends = nrf52840_g2_ultra -board = nano-g2-ultra -board_build.ldscript = boards/nrf52840_s140_v6.ld -build_flags = ${nrf52840_g2_ultra.build_flags} -I variants/nano_g2_ultra -D NANO_G2_ULTRA -D RADIO_CLASS=CustomSX1262 @@ -23,11 +14,47 @@ build_flags = ${nrf52840_g2_ultra.build_flags} -D SX126X_CURRENT_LIMIT=140 -D SX126X_RX_BOOSTED_GAIN=1 -D PIN_USER_BTN=38 -build_src_filter = ${nrf52840_g2_ultra.build_src_filter} +build_src_filter = ${nrf52_base.build_src_filter} + +<../variants/nano_g2_ultra> debug_tool = jlink upload_protocol = nrfutil +lib_deps = ${nrf52_base.lib_deps} + adafruit/Adafruit SH110X @ ~2.1.13 + adafruit/Adafruit GFX Library @ ^1.12.1 + stevemarple/MicroNMEA @ ^2.0.6 + +[env:Nano_G2_Ultra_repeater] +extends = Nano_G2_Ultra +build_flags = + ${Nano_G2_Ultra.build_flags} + -D DISPLAY_CLASS=SH1106Display + -D ADVERT_NAME='"Nano G2 Repeater"' + -D ADVERT_LAT=0.0 + -D ADVERT_LON=0.0 + -D ADMIN_PASSWORD='"password"' + -D MAX_NEIGHBOURS=50 +; -D MESH_PACKET_LOGGING=1 +; -D MESH_DEBUG=1 +build_src_filter = ${Nano_G2_Ultra.build_src_filter} + + + +<../examples/simple_repeater> + +[env:Nano_G2_Ultra_room_server] +extends = Nano_G2_Ultra +build_flags = + ${Nano_G2_Ultra.build_flags} + -D DISPLAY_CLASS=SH1106Display + -D ADVERT_NAME='"Nano G2 Room"' + -D ADVERT_LAT=0.0 + -D ADVERT_LON=0.0 + -D ADMIN_PASSWORD='"password"' + -D ROOM_PASSWORD='"hello"' +; -D MESH_PACKET_LOGGING=1 +; -D MESH_DEBUG=1 +build_src_filter = ${Nano_G2_Ultra.build_src_filter} + + + +<../examples/simple_room_server> [env:Nano_G2_Ultra_companion_radio_ble] extends = Nano_G2_Ultra @@ -54,12 +81,8 @@ build_src_filter = ${Nano_G2_Ultra.build_src_filter} + +<../examples/companion_radio/*.cpp> +<../examples/companion_radio/ui-new/*.cpp> -lib_deps = - ${Nano_G2_Ultra.lib_deps} +lib_deps = ${Nano_G2_Ultra.lib_deps} densaugeo/base64 @ ~1.4.0 - adafruit/Adafruit SH110X @ ~2.1.13 - adafruit/Adafruit GFX Library @ ^1.12.1 - stevemarple/MicroNMEA @ ^2.0.6 end2endzone/NonBlockingRTTTL@^1.3.0 [env:Nano_G2_Ultra_companion_radio_usb] @@ -84,10 +107,6 @@ build_src_filter = ${Nano_G2_Ultra.build_src_filter} + +<../examples/companion_radio/*.cpp> +<../examples/companion_radio/ui-new/*.cpp> -lib_deps = - ${Nano_G2_Ultra.lib_deps} +lib_deps = ${Nano_G2_Ultra.lib_deps} densaugeo/base64 @ ~1.4.0 - adafruit/Adafruit SH110X @ ~2.1.13 - adafruit/Adafruit GFX Library @ ^1.12.1 - stevemarple/MicroNMEA @ ^2.0.6 end2endzone/NonBlockingRTTTL@^1.3.0 From b9636818300831eb4300c1a708df24a33fdcdf63 Mon Sep 17 00:00:00 2001 From: Rastislav Vysoky Date: Tue, 28 Apr 2026 12:37:30 +0200 Subject: [PATCH 42/54] replace all intendation tabs to spaces in pio ini files --- platformio.ini | 4 ++-- variants/keepteen_lt1/platformio.ini | 2 +- variants/promicro/platformio.ini | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/platformio.ini b/platformio.ini index 864e5e1f..b10b3179 100644 --- a/platformio.ini +++ b/platformio.ini @@ -10,8 +10,8 @@ [platformio] extra_configs = - variants/*/platformio.ini - platformio.local.ini + variants/*/platformio.ini + platformio.local.ini [arduino_base] framework = arduino diff --git a/variants/keepteen_lt1/platformio.ini b/variants/keepteen_lt1/platformio.ini index b82ceb7e..55ee2157 100644 --- a/variants/keepteen_lt1/platformio.ini +++ b/variants/keepteen_lt1/platformio.ini @@ -17,7 +17,7 @@ build_src_filter = ${nrf52_base.build_src_filter} + +<../variants/keepteen_lt1> lib_deps= ${nrf52_base.lib_deps} - adafruit/Adafruit SSD1306 @ ^2.5.13 + adafruit/Adafruit SSD1306 @ ^2.5.13 stevemarple/MicroNMEA @ ^2.0.6 [env:KeepteenLT1_repeater] diff --git a/variants/promicro/platformio.ini b/variants/promicro/platformio.ini index 317537a9..390b0605 100644 --- a/variants/promicro/platformio.ini +++ b/variants/promicro/platformio.ini @@ -27,7 +27,7 @@ build_src_filter = ${nrf52_base.build_src_filter} + +<../variants/promicro> lib_deps= ${nrf52_base.lib_deps} - adafruit/Adafruit SSD1306 @ ^2.5.13 + adafruit/Adafruit SSD1306 @ ^2.5.13 adafruit/Adafruit INA3221 Library @ ^1.0.1 adafruit/Adafruit INA219 @ ^1.2.3 adafruit/Adafruit AHTX0 @ ^2.0.5 From 04b69e86bee15ba9db24d6e1ed009f809b022961 Mon Sep 17 00:00:00 2001 From: taco Date: Mon, 27 Apr 2026 12:01:24 +1000 Subject: [PATCH 43/54] revert bluefruit patch in preparation to switch to using our own fork of Adafruit NRF52 Arduino with the patch included --- arch/nrf52/extra_scripts/patch_bluefruit.py | 198 -------------------- platformio.ini | 4 +- 2 files changed, 1 insertion(+), 201 deletions(-) delete mode 100644 arch/nrf52/extra_scripts/patch_bluefruit.py diff --git a/arch/nrf52/extra_scripts/patch_bluefruit.py b/arch/nrf52/extra_scripts/patch_bluefruit.py deleted file mode 100644 index b43bffb5..00000000 --- a/arch/nrf52/extra_scripts/patch_bluefruit.py +++ /dev/null @@ -1,198 +0,0 @@ -""" -Bluefruit BLE Patch Script - -Patches Bluefruit library to fix semaphore leak bug that causes device lockup -when BLE central disconnects unexpectedly (e.g., going out of range, supervision timeout). - -Patches applied: -1. BLEConnection.h: Add _hvn_qsize member to track semaphore queue size -2. BLEConnection.cpp: Store hvn_qsize and restore semaphore on disconnect - -Bug description: -- When a BLE central disconnects unexpectedly (reason=8 supervision timeout), - the BLE_GATTS_EVT_HVN_TX_COMPLETE event may never fire -- This leaves the _hvn_sem counting semaphore in a decremented state -- Since BLEConnection objects are reused (destructor never called), the - semaphore count is never restored -- Eventually all semaphore counts are exhausted and notify() blocks/fails - -""" - -from pathlib import Path - -Import("env") # pylint: disable=undefined-variable - - -def _patch_ble_connection_header(source: Path) -> bool: - """ - Add _hvn_qsize member variable to BLEConnection class. - - This is needed to restore the semaphore to its correct count on disconnect. - - Returns True if patch was applied or already applied, False on error. - """ - try: - content = source.read_text() - - # Check if already patched - if "_hvn_qsize" in content: - return True # Already patched - - # Find the location to insert - after _phy declaration - original_pattern = ''' uint8_t _phy; - - uint8_t _role;''' - - patched_pattern = ''' uint8_t _phy; - uint8_t _hvn_qsize; - - uint8_t _role;''' - - if original_pattern not in content: - print("Bluefruit patch: WARNING - BLEConnection.h pattern not found") - return False - - content = content.replace(original_pattern, patched_pattern) - source.write_text(content) - - # Verify - if "_hvn_qsize" not in source.read_text(): - return False - - return True - except Exception as e: - print(f"Bluefruit patch: ERROR patching BLEConnection.h: {e}") - return False - - -def _patch_ble_connection_source(source: Path) -> bool: - """ - Patch BLEConnection.cpp to: - 1. Store hvn_qsize in constructor - 2. Restore _hvn_sem semaphore to full count on disconnect - - Returns True if patch was applied or already applied, False on error. - """ - try: - content = source.read_text() - - # Check if already patched (look for the restore loop) - if "uxSemaphoreGetCount(_hvn_sem)" in content: - return True # Already patched - - # Patch 1: Store queue size in constructor - constructor_original = ''' _hvn_sem = xSemaphoreCreateCounting(hvn_qsize, hvn_qsize);''' - - constructor_patched = ''' _hvn_qsize = hvn_qsize; - _hvn_sem = xSemaphoreCreateCounting(hvn_qsize, hvn_qsize);''' - - if constructor_original not in content: - print("Bluefruit patch: WARNING - BLEConnection.cpp constructor pattern not found") - return False - - content = content.replace(constructor_original, constructor_patched) - - # Patch 2: Restore semaphore on disconnect - disconnect_original = ''' case BLE_GAP_EVT_DISCONNECTED: - // mark as disconnected - _connected = false; - break;''' - - disconnect_patched = ''' case BLE_GAP_EVT_DISCONNECTED: - // Restore notification semaphore to full count - // This fixes lockup when disconnect occurs with notifications in flight - while (uxSemaphoreGetCount(_hvn_sem) < _hvn_qsize) { - xSemaphoreGive(_hvn_sem); - } - // Release indication semaphore if waiting - if (_hvc_sem) { - _hvc_received = false; - xSemaphoreGive(_hvc_sem); - } - // mark as disconnected - _connected = false; - break;''' - - if disconnect_original not in content: - print("Bluefruit patch: WARNING - BLEConnection.cpp disconnect pattern not found") - return False - - content = content.replace(disconnect_original, disconnect_patched) - source.write_text(content) - - # Verify - verify_content = source.read_text() - if "uxSemaphoreGetCount(_hvn_sem)" not in verify_content: - return False - if "_hvn_qsize = hvn_qsize" not in verify_content: - return False - - return True - except Exception as e: - print(f"Bluefruit patch: ERROR patching BLEConnection.cpp: {e}") - return False - - -def _apply_bluefruit_patches(target, source, env): # pylint: disable=unused-argument - framework_path = env.get("PLATFORMFW_DIR") - if not framework_path: - framework_path = env.PioPlatform().get_package_dir("framework-arduinoadafruitnrf52") - - if not framework_path: - print("Bluefruit patch: ERROR - framework directory not found") - env.Exit(1) - return - - framework_dir = Path(framework_path) - bluefruit_lib = framework_dir / "libraries" / "Bluefruit52Lib" / "src" - patch_failed = False - - # Patch BLEConnection.h - conn_header = bluefruit_lib / "BLEConnection.h" - if conn_header.exists(): - before = conn_header.read_text() - success = _patch_ble_connection_header(conn_header) - after = conn_header.read_text() - - if success: - if before != after: - print("Bluefruit patch: OK - Applied BLEConnection.h fix (added _hvn_qsize member)") - else: - print("Bluefruit patch: OK - BLEConnection.h already patched") - else: - print("Bluefruit patch: FAILED - BLEConnection.h") - patch_failed = True - else: - print(f"Bluefruit patch: ERROR - BLEConnection.h not found at {conn_header}") - patch_failed = True - - # Patch BLEConnection.cpp - conn_source = bluefruit_lib / "BLEConnection.cpp" - if conn_source.exists(): - before = conn_source.read_text() - success = _patch_ble_connection_source(conn_source) - after = conn_source.read_text() - - if success: - if before != after: - print("Bluefruit patch: OK - Applied BLEConnection.cpp fix (restore semaphore on disconnect)") - else: - print("Bluefruit patch: OK - BLEConnection.cpp already patched") - else: - print("Bluefruit patch: FAILED - BLEConnection.cpp") - patch_failed = True - else: - print(f"Bluefruit patch: ERROR - BLEConnection.cpp not found at {conn_source}") - patch_failed = True - - if patch_failed: - print("Bluefruit patch: CRITICAL - Patch failed! Build aborted.") - env.Exit(1) - - -# Register the patch to run before build -bluefruit_action = env.VerboseAction(_apply_bluefruit_patches, "Applying Bluefruit BLE patches...") -env.AddPreAction("$BUILD_DIR/${PROGNAME}.elf", bluefruit_action) - -# Also run immediately to patch before any compilation -_apply_bluefruit_patches(None, None, env) diff --git a/platformio.ini b/platformio.ini index b10b3179..cc1518a7 100644 --- a/platformio.ini +++ b/platformio.ini @@ -82,9 +82,7 @@ extends = arduino_base platform = nordicnrf52 platform_packages = framework-arduinoadafruitnrf52 @ 1.10700.0 -extra_scripts = - create-uf2.py - arch/nrf52/extra_scripts/patch_bluefruit.py +extra_scripts = create-uf2.py build_flags = ${arduino_base.build_flags} -D NRF52_PLATFORM -D LFS_NO_ASSERT=1 From f7d8fa342053b17aeff783a63b923641306f6728 Mon Sep 17 00:00:00 2001 From: taco Date: Tue, 28 Apr 2026 21:46:14 +1000 Subject: [PATCH 44/54] use internal fork of Adafruit nRF52 Arduino --- platformio.ini | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/platformio.ini b/platformio.ini index cc1518a7..6a3c28c3 100644 --- a/platformio.ini +++ b/platformio.ini @@ -81,7 +81,7 @@ platform = https://github.com/pioarduino/platform-espressif32/releases/download/ extends = arduino_base platform = nordicnrf52 platform_packages = - framework-arduinoadafruitnrf52 @ 1.10700.0 + framework-arduinoadafruitnrf52 @ https://github.com/meshcore-dev/Adafruit_nRF52_Arduino#d541301 extra_scripts = create-uf2.py build_flags = ${arduino_base.build_flags} -D NRF52_PLATFORM From 66009069cd14d28777781cb66923254b0a1999e5 Mon Sep 17 00:00:00 2001 From: Rastislav Vysoky Date: Tue, 28 Apr 2026 13:53:35 +0200 Subject: [PATCH 45/54] standardize the minewsemi variant --- variants/minewsemi_me25ls01/platformio.ini | 40 +++++----------------- 1 file changed, 8 insertions(+), 32 deletions(-) diff --git a/variants/minewsemi_me25ls01/platformio.ini b/variants/minewsemi_me25ls01/platformio.ini index dacd8d34..91e62243 100644 --- a/variants/minewsemi_me25ls01/platformio.ini +++ b/variants/minewsemi_me25ls01/platformio.ini @@ -1,23 +1,11 @@ -; ----------------- NRF52 me25ls01--------------------- -[nrf52840_me25ls01] +[me25ls01] extends = nrf52_base -platform_packages = framework-arduinoadafruitnrf52 +board = minewsemi_me25ls01 +board_build.ldscript = boards/nrf52840_s140_v7.ld build_flags = ${nrf52_base.build_flags} -I src/helpers/nrf52 -I lib/nrf52/s140_nrf52_7.3.0_API/include -I lib/nrf52/s140_nrf52_7.3.0_API/include/nrf52 -lib_ignore = - BluetoothOTA - lib5b4 -lib_deps = - ${nrf52_base.lib_deps} - rweather/Crypto @ ^0.4.0 - -[me25ls01] -extends = nrf52840_me25ls01 -board = minewsemi_me25ls01 -board_build.ldscript = boards/nrf52840_s140_v7.ld -build_flags = ${nrf52840_me25ls01.build_flags} -I variants/minewsemi_me25ls01 -D me25ls01 -D PIN_USER_BTN=27 @@ -31,13 +19,14 @@ build_flags = ${nrf52840_me25ls01.build_flags} -D ENV_INCLUDE_BME280=1 -D ENV_INCLUDE_INA3221=1 -D ENV_INCLUDE_INA219=1 -build_src_filter = ${nrf52840_me25ls01.build_src_filter} +build_src_filter = ${nrf52_base.build_src_filter} + +<../variants/minewsemi_me25ls01> + debug_tool = jlink upload_protocol = nrfutil -lib_deps = ${nrf52840_me25ls01.lib_deps} +lib_deps = ${nrf52_base.lib_deps} + adafruit/RTClib @ ^2.1.3 densaugeo/base64 @ ~1.4.0 stevemarple/MicroNMEA @ ^2.0.6 end2endzone/NonBlockingRTTTL@^1.3.0 @@ -45,7 +34,7 @@ lib_deps = ${nrf52840_me25ls01.lib_deps} adafruit/Adafruit INA3221 Library @ ^1.0.1 adafruit/Adafruit INA219 @ ^1.2.3 adafruit/Adafruit AHTX0 @ ^2.0.5 - adafruit/Adafruit BME280 Library @ ^2.3.0 + adafruit/Adafruit BME280 Library @ ^2.3.0 [env:Minewsemi_me25ls01_companion_radio_ble] extends = me25ls01 @@ -64,14 +53,11 @@ build_flags = ${me25ls01.build_flags} -D RF_SWITCH_TABLE -D DISPLAY_CLASS=NullDisplayDriver ;-D PIN_BUZZER=25 - ;-D PIN_BUZZER_EN=37 + ;-D PIN_BUZZER_EN=37 build_src_filter = ${me25ls01.build_src_filter} + +<../examples/companion_radio/*.cpp> +<../examples/companion_radio/ui-orig/*.cpp> -lib_deps = ${me25ls01.lib_deps} - adafruit/RTClib @ ^2.1.3 - [env:Minewsemi_me25ls01_repeater] extends = me25ls01 @@ -93,10 +79,6 @@ build_flags = ${me25ls01.build_flags} -D DISPLAY_CLASS=NullDisplayDriver build_src_filter = ${me25ls01.build_src_filter} +<../examples/simple_repeater> -lib_deps = ${me25ls01.lib_deps} - adafruit/RTClib @ ^2.1.3 - - [env:Minewsemi_me25ls01_room_server] extends = me25ls01 @@ -119,8 +101,6 @@ build_flags = ${me25ls01.build_flags} -D DISPLAY_CLASS=NullDisplayDriver build_src_filter = ${me25ls01.build_src_filter} +<../examples/simple_room_server> -lib_deps = ${me25ls01.lib_deps} - adafruit/RTClib @ ^2.1.3 [env:Minewsemi_me25ls01_terminal_chat] extends = me25ls01 @@ -143,8 +123,6 @@ build_flags = ${me25ls01.build_flags} -D DISPLAY_CLASS=NullDisplayDriver build_src_filter = ${me25ls01.build_src_filter} +<../examples/simple_secure_chat/main.cpp> -lib_deps = ${me25ls01.lib_deps} - adafruit/RTClib @ ^2.1.3 [env:Minewsemi_me25ls01_companion_radio_usb] extends = me25ls01 @@ -166,6 +144,4 @@ build_src_filter = ${me25ls01.build_src_filter} + +<../examples/companion_radio/*.cpp> +<../examples/companion_radio/ui-orig/*.cpp> -lib_deps = ${me25ls01.lib_deps} - adafruit/RTClib @ ^2.1.3 From 5beef490a0794f2969967b5a825bdf739240d886 Mon Sep 17 00:00:00 2001 From: Rastislav Vysoky Date: Tue, 28 Apr 2026 15:09:25 +0200 Subject: [PATCH 46/54] add kiss radio env to most of the variants --- examples/kiss_modem/main.cpp | 5 +- variants/ebyte_eora_s3/platformio.ini | 5 + variants/gat562_30s_mesh_kit/platformio.ini | 4 + variants/gat562_mesh_evb_pro/platformio.ini | 5 + .../gat562_mesh_tracker_pro/platformio.ini | 4 + variants/gat562_mesh_watch13/platformio.ini | 4 + variants/generic-e22/platformio.ini | 5 + variants/heltec_ct62/platformio.ini | 5 + variants/heltec_e213/platformio.ini | 5 + variants/heltec_e290/platformio.ini | 5 + variants/heltec_mesh_solar/platformio.ini | 7 +- variants/heltec_t096/platformio.ini | 9 +- variants/heltec_t114/platformio.ini | 12 +- variants/heltec_t190/platformio.ini | 5 + variants/heltec_tracker/platformio.ini | 5 + variants/heltec_tracker_v2/platformio.ini | 7 +- variants/heltec_v2/platformio.ini | 5 + variants/heltec_v3/platformio.ini | 4 - variants/heltec_v4/platformio.ini | 5 + variants/heltec_wireless_paper/platformio.ini | 5 + variants/ikoka_handheld_nrf/platformio.ini | 13 +- variants/ikoka_nano_nrf/platformio.ini | 15 + variants/ikoka_stick_nrf/platformio.ini | 15 + variants/keepteen_lt1/platformio.ini | 7 +- variants/lilygo_t3s3/platformio.ini | 5 + variants/lilygo_t3s3_sx1276/platformio.ini | 7 +- variants/lilygo_tbeam_1w/platformio.ini | 5 + variants/lilygo_tbeam_SX1262/platformio.ini | 5 + variants/lilygo_tbeam_SX1276/platformio.ini | 5 + .../platformio.ini | 5 + variants/lilygo_tdeck/platformio.ini | 10 +- variants/lilygo_techo/platformio.ini | 5 + variants/lilygo_techo_lite/platformio.ini | 5 + variants/lilygo_tlora_c6/platformio.ini | 5 + variants/lilygo_tlora_v2_1/platformio.ini | 5 + variants/m5stack_unit_c6l/platformio.ini | 5 + variants/mesh_pocket/platformio.ini | 7 +- variants/meshadventurer/platformio.ini | 38 +- variants/meshtiny/platformio.ini | 5 + variants/minewsemi_me25ls01/platformio.ini | 346 +++++++++--------- variants/muziworks_r1_neo/platformio.ini | 5 + variants/nano_g2_ultra/platformio.ini | 5 + variants/nibble_screen_connect/platformio.ini | 5 + variants/promicro/platformio.ini | 5 + variants/rak11310/platformio.ini | 5 + variants/rak3112/platformio.ini | 5 + variants/rak3401/platformio.ini | 5 + variants/rak3x72/platformio.ini | 5 + variants/rak_wismesh_tag/platformio.ini | 7 +- variants/rpi_picow/platformio.ini | 5 + variants/station_g2/platformio.ini | 5 + variants/t1000-e/platformio.ini | 7 + variants/tenstar_c3/platformio.ini | 20 + variants/thinknode_m1/platformio.ini | 7 +- variants/thinknode_m2/platformio.ini | 7 + variants/thinknode_m3/platformio.ini | 11 +- variants/thinknode_m5/platformio.ini | 5 + variants/thinknode_m6/platformio.ini | 7 +- variants/tiny_relay/platformio.ini | 5 + variants/waveshare_rp2040_lora/platformio.ini | 5 + variants/wio-e5-dev/platformio.ini | 7 + variants/wio-e5-mini/platformio.ini | 9 +- variants/wio-tracker-l1-eink/platformio.ini | 5 + variants/wio-tracker-l1/platformio.ini | 5 + variants/wio_wm1110/platformio.ini | 5 + variants/xiao_c3/platformio.ini | 5 + variants/xiao_c6/platformio.ini | 5 + variants/xiao_rp2040/platformio.ini | 5 + variants/xiao_s3_wio/platformio.ini | 5 + 69 files changed, 586 insertions(+), 220 deletions(-) diff --git a/examples/kiss_modem/main.cpp b/examples/kiss_modem/main.cpp index 35079592..bc7508a8 100644 --- a/examples/kiss_modem/main.cpp +++ b/examples/kiss_modem/main.cpp @@ -10,7 +10,10 @@ #include #elif defined(ESP32) #include +#else + #include #endif + #if defined(KISS_UART_RX) && defined(KISS_UART_TX) #include #endif @@ -29,7 +32,7 @@ void halt() { } void loadOrCreateIdentity() { -#if defined(NRF52_PLATFORM) +#if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM) InternalFS.begin(); IdentityStore store(InternalFS, ""); #elif defined(ESP32) diff --git a/variants/ebyte_eora_s3/platformio.ini b/variants/ebyte_eora_s3/platformio.ini index d807b978..15fe761b 100644 --- a/variants/ebyte_eora_s3/platformio.ini +++ b/variants/ebyte_eora_s3/platformio.ini @@ -135,3 +135,8 @@ build_src_filter = ${Ebyte_EoRa-S3.build_src_filter} lib_deps = ${Ebyte_EoRa-S3.lib_deps} densaugeo/base64 @ ~1.4.0 + +[env:Ebyte_EoRa-S3_kiss_modem] +extends = Ebyte_EoRa-S3 +build_src_filter = ${Ebyte_EoRa-S3.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/gat562_30s_mesh_kit/platformio.ini b/variants/gat562_30s_mesh_kit/platformio.ini index 1467f0fa..2baac256 100644 --- a/variants/gat562_30s_mesh_kit/platformio.ini +++ b/variants/gat562_30s_mesh_kit/platformio.ini @@ -112,3 +112,7 @@ lib_deps = densaugeo/base64 @ ~1.4.0 end2endzone/NonBlockingRTTTL@^1.3.0 +[env:GAT562_30S_Mesh_Kit_kiss_modem] +extends = GAT562_30S_Mesh_Kit +build_src_filter = ${GAT562_30S_Mesh_Kit.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/gat562_mesh_evb_pro/platformio.ini b/variants/gat562_mesh_evb_pro/platformio.ini index cede9c97..b3e89417 100644 --- a/variants/gat562_mesh_evb_pro/platformio.ini +++ b/variants/gat562_mesh_evb_pro/platformio.ini @@ -50,3 +50,8 @@ build_flags = ; -D MESH_DEBUG=1 build_src_filter = ${GAT562_Mesh_EVB_Pro.build_src_filter} +<../examples/simple_room_server> + +[env:GAT562_Mesh_EVB_Pro_kiss_modem] +extends = GAT562_Mesh_EVB_Pro +build_src_filter = ${GAT562_Mesh_EVB_Pro.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/gat562_mesh_tracker_pro/platformio.ini b/variants/gat562_mesh_tracker_pro/platformio.ini index 8a947bce..af153b8f 100644 --- a/variants/gat562_mesh_tracker_pro/platformio.ini +++ b/variants/gat562_mesh_tracker_pro/platformio.ini @@ -106,3 +106,7 @@ lib_deps = ${GAT562_Mesh_Tracker_Pro.lib_deps} densaugeo/base64 @ ~1.4.0 +[env:GAT562_Mesh_Tracker_Pro_kiss_modem] +extends = GAT562_Mesh_Tracker_Pro +build_src_filter = ${GAT562_Mesh_Tracker_Pro.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/gat562_mesh_watch13/platformio.ini b/variants/gat562_mesh_watch13/platformio.ini index ef30829d..f3510b74 100644 --- a/variants/gat562_mesh_watch13/platformio.ini +++ b/variants/gat562_mesh_watch13/platformio.ini @@ -87,3 +87,7 @@ lib_deps = ${GAT562_Mesh_Watch13.lib_deps} densaugeo/base64 @ ~1.4.0 +[env:GAT562_Mesh_Watch13_kiss_modem] +extends = GAT562_Mesh_Watch13 +build_src_filter = ${GAT562_Mesh_Watch13.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/generic-e22/platformio.ini b/variants/generic-e22/platformio.ini index 6b7bfd4e..dfa2ff64 100644 --- a/variants/generic-e22/platformio.ini +++ b/variants/generic-e22/platformio.ini @@ -95,6 +95,11 @@ lib_deps = ${Generic_E22.lib_deps} ${esp32_ota.lib_deps} +[env:Generic_E22_kiss_modem] +extends = Generic_E22 +build_src_filter = ${Generic_E22.build_src_filter} + +<../examples/kiss_modem/> + [env:Generic_E22_sx1268_repeater] extends = Generic_E22 build_src_filter = ${Generic_E22.build_src_filter} diff --git a/variants/heltec_ct62/platformio.ini b/variants/heltec_ct62/platformio.ini index 910385ec..0179d965 100644 --- a/variants/heltec_ct62/platformio.ini +++ b/variants/heltec_ct62/platformio.ini @@ -150,3 +150,8 @@ build_src_filter = ${Heltec_ct62.build_src_filter} lib_deps = ${Heltec_ct62.lib_deps} ${esp32_ota.lib_deps} + +[env:Heltec_ct62_kiss_modem] +extends = Heltec_ct62 +build_src_filter = ${Heltec_ct62.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/heltec_e213/platformio.ini b/variants/heltec_e213/platformio.ini index 395e22ea..123edd91 100644 --- a/variants/heltec_e213/platformio.ini +++ b/variants/heltec_e213/platformio.ini @@ -166,3 +166,8 @@ lib_deps = ${Heltec_E213_base.lib_deps} ${esp32_ota.lib_deps} bakercp/CRC32 @ ^2.0.0 + +[env:Heltec_E213_kiss_modem] +extends = Heltec_E213_base +build_src_filter = ${Heltec_E213_base.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/heltec_e290/platformio.ini b/variants/heltec_e290/platformio.ini index 475ae868..6e0eaffc 100644 --- a/variants/heltec_e290/platformio.ini +++ b/variants/heltec_e290/platformio.ini @@ -162,3 +162,8 @@ lib_deps = ${Heltec_E290_base.lib_deps} ${esp32_ota.lib_deps} bakercp/CRC32 @ ^2.0.0 + +[env:Heltec_E290_kiss_modem] +extends = Heltec_E290_base +build_src_filter = ${Heltec_E290_base.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/heltec_mesh_solar/platformio.ini b/variants/heltec_mesh_solar/platformio.ini index 7bfbac85..92d641a3 100644 --- a/variants/heltec_mesh_solar/platformio.ini +++ b/variants/heltec_mesh_solar/platformio.ini @@ -92,4 +92,9 @@ build_src_filter = ${Heltec_mesh_solar.build_src_filter} +<../examples/companion_radio/*.cpp> lib_deps = ${Heltec_mesh_solar.lib_deps} - densaugeo/base64 @ ~1.4.0 \ No newline at end of file + densaugeo/base64 @ ~1.4.0 + +[env:Heltec_mesh_solar_kiss_modem] +extends = Heltec_mesh_solar +build_src_filter = ${Heltec_mesh_solar.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/heltec_t096/platformio.ini b/variants/heltec_t096/platformio.ini index 19b05f3c..14155f5e 100644 --- a/variants/heltec_t096/platformio.ini +++ b/variants/heltec_t096/platformio.ini @@ -92,7 +92,7 @@ build_src_filter = ${Heltec_t096.build_src_filter} [env:Heltec_t096_room_server] extends = Heltec_t096 build_src_filter = ${Heltec_t096.build_src_filter} - +<../examples/simple_room_server> + +<../examples/simple_room_server> build_flags = ${Heltec_t096.build_flags} -D ADVERT_NAME='"Heltec_t096 Room"' @@ -145,4 +145,9 @@ build_src_filter = ${Heltec_t096.build_src_filter} +<../examples/companion_radio/ui-new/*.cpp> lib_deps = ${Heltec_t096.lib_deps} - densaugeo/base64 @ ~1.4.0 \ No newline at end of file + densaugeo/base64 @ ~1.4.0 + +[env:Heltec_t096_kiss_modem] +extends = Heltec_t096 +build_src_filter = ${Heltec_t096.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/heltec_t114/platformio.ini b/variants/heltec_t114/platformio.ini index b985030f..135babb1 100644 --- a/variants/heltec_t114/platformio.ini +++ b/variants/heltec_t114/platformio.ini @@ -50,7 +50,6 @@ upload_protocol = nrfutil extends = Heltec_t114 build_src_filter = ${Heltec_t114.build_src_filter} +<../examples/simple_repeater> - build_flags = ${Heltec_t114.build_flags} -D ADVERT_NAME='"Heltec_T114 Repeater"' @@ -127,10 +126,6 @@ build_flags = -D DISPLAY_CLASS=NullDisplayDriver -D MAX_CONTACTS=350 -D MAX_GROUP_CHANNELS=40 -; -D BLE_PIN_CODE=123456 -; -D BLE_DEBUG_LOGGING=1 -; -D MESH_PACKET_LOGGING=1 -; -D MESH_DEBUG=1 build_src_filter = ${Heltec_t114.build_src_filter} + +<../examples/companion_radio/*.cpp> @@ -251,4 +246,9 @@ build_src_filter = ${Heltec_t114_with_display.build_src_filter} +<../examples/companion_radio/ui-new/*.cpp> lib_deps = ${Heltec_t114_with_display.lib_deps} - densaugeo/base64 @ ~1.4.0 \ No newline at end of file + densaugeo/base64 @ ~1.4.0 + +[env:Heltec_t114_kiss_modem] +extends = Heltec_t114 +build_src_filter = ${Heltec_t114.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/heltec_t190/platformio.ini b/variants/heltec_t190/platformio.ini index 4b034032..411fee85 100644 --- a/variants/heltec_t190/platformio.ini +++ b/variants/heltec_t190/platformio.ini @@ -153,3 +153,8 @@ build_src_filter = ${Heltec_T190_base.build_src_filter} lib_deps = ${Heltec_T190_base.lib_deps} ${esp32_ota.lib_deps} + +[env:Heltec_T190_kiss_modem] +extends = Heltec_T190_base +build_src_filter = ${Heltec_T190_base.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/heltec_tracker/platformio.ini b/variants/heltec_tracker/platformio.ini index e0a8f5fa..69293d70 100644 --- a/variants/heltec_tracker/platformio.ini +++ b/variants/heltec_tracker/platformio.ini @@ -186,3 +186,8 @@ build_src_filter = ${Heltec_tracker_base.build_src_filter} lib_deps = ${Heltec_tracker_base.lib_deps} ${esp32_ota.lib_deps} + +[env:Heltec_Wireless_Tracker_kiss_modem] +extends = Heltec_tracker_base +build_src_filter = ${Heltec_tracker_base.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/heltec_tracker_v2/platformio.ini b/variants/heltec_tracker_v2/platformio.ini index 956b1ec7..d57c2113 100644 --- a/variants/heltec_tracker_v2/platformio.ini +++ b/variants/heltec_tracker_v2/platformio.ini @@ -187,7 +187,7 @@ build_flags = -D WIFI_DEBUG_LOGGING=1 -D WIFI_SSID='"myssid"' -D WIFI_PWD='"mypwd"' - -D OFFLINE_QUEUE_SIZE=256 + -D OFFLINE_QUEUE_SIZE=256 ; -D MESH_PACKET_LOGGING=1 ; -D MESH_DEBUG=1 build_src_filter = ${Heltec_tracker_v2.build_src_filter} @@ -217,3 +217,8 @@ build_src_filter = ${Heltec_tracker_v2.build_src_filter} lib_deps = ${Heltec_tracker_v2.lib_deps} ${esp32_ota.lib_deps} + +[env:heltec_tracker_v2_kiss_modem] +extends = Heltec_tracker_v2 +build_src_filter = ${Heltec_tracker_v2.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/heltec_v2/platformio.ini b/variants/heltec_v2/platformio.ini index 99f6f7e1..c103dd8d 100644 --- a/variants/heltec_v2/platformio.ini +++ b/variants/heltec_v2/platformio.ini @@ -195,3 +195,8 @@ build_src_filter = ${Heltec_lora32_v2.build_src_filter} lib_deps = ${Heltec_lora32_v2.lib_deps} densaugeo/base64 @ ~1.4.0 + +[env:Heltec_v2_kiss_modem] +extends = Heltec_lora32_v2 +build_src_filter = ${Heltec_lora32_v2.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/heltec_v3/platformio.ini b/variants/heltec_v3/platformio.ini index 803ee683..a70a93a5 100644 --- a/variants/heltec_v3/platformio.ini +++ b/variants/heltec_v3/platformio.ini @@ -371,9 +371,5 @@ lib_deps = [env:Heltec_v3_kiss_modem] extends = Heltec_lora32_v3 -build_flags = - ${Heltec_lora32_v3.build_flags} build_src_filter = ${Heltec_lora32_v3.build_src_filter} +<../examples/kiss_modem/> -lib_deps = - ${Heltec_lora32_v3.lib_deps} \ No newline at end of file diff --git a/variants/heltec_v4/platformio.ini b/variants/heltec_v4/platformio.ini index 87632f32..fabf3827 100644 --- a/variants/heltec_v4/platformio.ini +++ b/variants/heltec_v4/platformio.ini @@ -429,3 +429,8 @@ build_src_filter = ${heltec_v4_tft.build_src_filter} lib_deps = ${heltec_v4_tft.lib_deps} ${esp32_ota.lib_deps} + +[env:heltec_v4_kiss_modem] +extends = Heltec_lora32_v4 +build_src_filter = ${Heltec_lora32_v4.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/heltec_wireless_paper/platformio.ini b/variants/heltec_wireless_paper/platformio.ini index c6fe657d..48723d16 100644 --- a/variants/heltec_wireless_paper/platformio.ini +++ b/variants/heltec_wireless_paper/platformio.ini @@ -165,3 +165,8 @@ lib_deps = ${Heltec_Wireless_Paper_base.lib_deps} ${esp32_ota.lib_deps} bakercp/CRC32 @ ^2.0.0 + +[env:Heltec_Wireless_Paper_kiss_modem] +extends = Heltec_Wireless_Paper_base +build_src_filter = ${Heltec_Wireless_Paper_base.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/ikoka_handheld_nrf/platformio.ini b/variants/ikoka_handheld_nrf/platformio.ini index 9f48cd41..51b602e4 100644 --- a/variants/ikoka_handheld_nrf/platformio.ini +++ b/variants/ikoka_handheld_nrf/platformio.ini @@ -86,8 +86,7 @@ build_src_filter = ${ikoka_handheld_nrf_ssd1306_companion.build_src_filter} [env:ikoka_handheld_nrf_e22_30dbm_repeater] extends = ikoka_handheld_nrf -build_flags = - ${ikoka_handheld_nrf.build_flags} +build_flags = ${ikoka_handheld_nrf.build_flags} -D ADVERT_NAME='"ikoka_handheld Repeater"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 @@ -99,8 +98,7 @@ build_src_filter = ${ikoka_handheld_nrf.build_src_filter} [env:ikoka_handheld_nrf_e22_30dbm_room_server] extends = ikoka_handheld_nrf -build_flags = - ${ikoka_handheld_nrf.build_flags} +build_flags = ${ikoka_handheld_nrf.build_flags} -D ADVERT_NAME='"ikoka_handheld Room"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 @@ -108,3 +106,10 @@ build_flags = -D LORA_TX_POWER=20 build_src_filter = ${ikoka_handheld_nrf.build_src_filter} +<../examples/simple_room_server/*.cpp> + +[env:ikoka_handheld_nrf_kiss_modem] +extends = ikoka_handheld_nrf +build_flags = ${ikoka_handheld_nrf.build_flags} + -D LORA_TX_POWER=20 +build_src_filter = ${ikoka_handheld_nrf.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/ikoka_nano_nrf/platformio.ini b/variants/ikoka_nano_nrf/platformio.ini index d631174d..e72f83ce 100644 --- a/variants/ikoka_nano_nrf/platformio.ini +++ b/variants/ikoka_nano_nrf/platformio.ini @@ -279,3 +279,18 @@ build_flags = build_src_filter = ${ikoka_nano_nrf_room_server.build_src_filter} ${ikoka_nano_nrf_e22_33dbm.build_src_filter} + +[env:ikoka_nano_nrf_22dbm_kiss_modem] +extends = ikoka_nano_nrf_e22_22dbm +build_src_filter = ${ikoka_nano_nrf_e22_22dbm.build_src_filter} + +<../examples/kiss_modem/> + +[env:ikoka_nano_nrf_30dbm_kiss_modem] +extends = ikoka_nano_nrf_e22_30dbm +build_src_filter = ${ikoka_nano_nrf_e22_30dbm.build_src_filter} + +<../examples/kiss_modem/> + +[env:ikoka_nano_nrf_33dbm_kiss_modem] +extends = ikoka_nano_nrf_e22_33dbm +build_src_filter = ${ikoka_nano_nrf_e22_33dbm.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/ikoka_stick_nrf/platformio.ini b/variants/ikoka_stick_nrf/platformio.ini index e95c6375..06e39e84 100644 --- a/variants/ikoka_stick_nrf/platformio.ini +++ b/variants/ikoka_stick_nrf/platformio.ini @@ -290,3 +290,18 @@ build_flags = build_src_filter = ${ikoka_stick_nrf_room_server.build_src_filter} ${ikoka_stick_nrf_e22_33dbm.build_src_filter} + +[env:ikoka_stick_nrf_22dbm_kiss_modem] +extends = ikoka_stick_nrf_e22_22dbm +build_src_filter = ${ikoka_stick_nrf_e22_22dbm.build_src_filter} + +<../examples/kiss_modem/> + +[env:ikoka_stick_nrf_30dbm_kiss_modem] +extends = ikoka_stick_nrf_e22_30dbm +build_src_filter = ${ikoka_stick_nrf_e22_30dbm.build_src_filter} + +<../examples/kiss_modem/> + +[env:ikoka_stick_nrf_33dbm_kiss_modem] +extends = ikoka_stick_nrf_e22_33dbm +build_src_filter = ${ikoka_stick_nrf_e22_33dbm.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/keepteen_lt1/platformio.ini b/variants/keepteen_lt1/platformio.ini index b82ceb7e..8aa407a2 100644 --- a/variants/keepteen_lt1/platformio.ini +++ b/variants/keepteen_lt1/platformio.ini @@ -99,4 +99,9 @@ build_src_filter = ${KeepteenLT1.build_src_filter} +<../examples/companion_radio/ui-new/*.cpp> lib_deps = ${KeepteenLT1.lib_deps} adafruit/RTClib @ ^2.1.3 - densaugeo/base64 @ ~1.4.0 \ No newline at end of file + densaugeo/base64 @ ~1.4.0 + +[env:KeepteenLT1_kiss_modem] +extends = KeepteenLT1 +build_src_filter = ${KeepteenLT1.build_src_filter} + +<../examples/kiss_modem/> \ No newline at end of file diff --git a/variants/lilygo_t3s3/platformio.ini b/variants/lilygo_t3s3/platformio.ini index 1fefcece..54990117 100644 --- a/variants/lilygo_t3s3/platformio.ini +++ b/variants/lilygo_t3s3/platformio.ini @@ -173,3 +173,8 @@ build_src_filter = ${LilyGo_T3S3_sx1262.build_src_filter} lib_deps = ${LilyGo_T3S3_sx1262.lib_deps} densaugeo/base64 @ ~1.4.0 + +[env:LilyGo_T3S3_sx1262_kiss_modem] +extends = LilyGo_T3S3_sx1262 +build_src_filter = ${LilyGo_T3S3_sx1262.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/lilygo_t3s3_sx1276/platformio.ini b/variants/lilygo_t3s3_sx1276/platformio.ini index 5a7ece2c..5df63202 100644 --- a/variants/lilygo_t3s3_sx1276/platformio.ini +++ b/variants/lilygo_t3s3_sx1276/platformio.ini @@ -168,4 +168,9 @@ build_src_filter = ${LilyGo_T3S3_sx1276.build_src_filter} +<../examples/companion_radio/ui-new/*.cpp> lib_deps = ${LilyGo_T3S3_sx1276.lib_deps} - densaugeo/base64 @ ~1.4.0 \ No newline at end of file + densaugeo/base64 @ ~1.4.0 + +[env:LilyGo_T3S3_sx1276_kiss_modem] +extends = LilyGo_T3S3_sx1276 +build_src_filter = ${LilyGo_T3S3_sx1276.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/lilygo_tbeam_1w/platformio.ini b/variants/lilygo_tbeam_1w/platformio.ini index 7c845307..c7a59552 100644 --- a/variants/lilygo_tbeam_1w/platformio.ini +++ b/variants/lilygo_tbeam_1w/platformio.ini @@ -192,3 +192,8 @@ build_src_filter = ${LilyGo_TBeam_1W.build_src_filter} lib_deps = ${LilyGo_TBeam_1W.lib_deps} ${esp32_ota.lib_deps} + +[env:LilyGo_TBeam_1W_kiss_modem] +extends = LilyGo_TBeam_1W +build_src_filter = ${LilyGo_TBeam_1W.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/lilygo_tbeam_SX1262/platformio.ini b/variants/lilygo_tbeam_SX1262/platformio.ini index d3bc7c99..77b39304 100644 --- a/variants/lilygo_tbeam_SX1262/platformio.ini +++ b/variants/lilygo_tbeam_SX1262/platformio.ini @@ -133,3 +133,8 @@ build_src_filter = ${LilyGo_TBeam_SX1262.build_src_filter} lib_deps = ${LilyGo_TBeam_SX1262.lib_deps} ${esp32_ota.lib_deps} + +[env:Tbeam_SX1262_kiss_modem] +extends = LilyGo_TBeam_SX1262 +build_src_filter = ${LilyGo_TBeam_SX1262.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/lilygo_tbeam_SX1276/platformio.ini b/variants/lilygo_tbeam_SX1276/platformio.ini index 3562c40e..6853a232 100644 --- a/variants/lilygo_tbeam_SX1276/platformio.ini +++ b/variants/lilygo_tbeam_SX1276/platformio.ini @@ -131,3 +131,8 @@ build_src_filter = ${LilyGo_TBeam_SX1276.build_src_filter} lib_deps = ${LilyGo_TBeam_SX1276.lib_deps} ${esp32_ota.lib_deps} + +[env:Tbeam_SX1276_kiss_modem] +extends = LilyGo_TBeam_SX1276 +build_src_filter = ${LilyGo_TBeam_SX1276.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/lilygo_tbeam_supreme_SX1262/platformio.ini b/variants/lilygo_tbeam_supreme_SX1262/platformio.ini index ffee37a9..845dd415 100644 --- a/variants/lilygo_tbeam_supreme_SX1262/platformio.ini +++ b/variants/lilygo_tbeam_supreme_SX1262/platformio.ini @@ -158,3 +158,8 @@ build_src_filter = ${T_Beam_S3_Supreme_SX1262.build_src_filter} lib_deps = ${T_Beam_S3_Supreme_SX1262.lib_deps} densaugeo/base64 @ ~1.4.0 + +[env:T_Beam_S3_Supreme_SX1262_kiss_modem] +extends = T_Beam_S3_Supreme_SX1262 +build_src_filter = ${T_Beam_S3_Supreme_SX1262.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/lilygo_tdeck/platformio.ini b/variants/lilygo_tdeck/platformio.ini index a8408afa..745d8ff5 100644 --- a/variants/lilygo_tdeck/platformio.ini +++ b/variants/lilygo_tdeck/platformio.ini @@ -57,6 +57,7 @@ build_flags = build_src_filter = ${esp32_base.build_src_filter} +<../variants/lilygo_tdeck> + + + lib_deps = ${esp32_base.lib_deps} ${sensor_base.lib_deps} @@ -75,7 +76,6 @@ build_src_filter = ${LilyGo_TDeck.build_src_filter} + +<../examples/companion_radio/*.cpp> +<../examples/companion_radio/ui-new/*.cpp> - + lib_deps = ${LilyGo_TDeck.lib_deps} densaugeo/base64 @ ~1.4.0 @@ -94,7 +94,6 @@ build_src_filter = ${LilyGo_TDeck.build_src_filter} + +<../examples/companion_radio/*.cpp> +<../examples/companion_radio/ui-new/*.cpp> - + lib_deps = ${LilyGo_TDeck.lib_deps} densaugeo/base64 @ ~1.4.0 @@ -113,4 +112,9 @@ build_src_filter = ${LilyGo_TDeck.build_src_filter} + lib_deps = ${LilyGo_TDeck.lib_deps} - ${esp32_ota.lib_deps} \ No newline at end of file + ${esp32_ota.lib_deps} + +[env:LilyGo_TDeck_kiss_modem] +extends = LilyGo_TDeck +build_src_filter = ${LilyGo_TDeck.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/lilygo_techo/platformio.ini b/variants/lilygo_techo/platformio.ini index e2172b1d..5df77f95 100644 --- a/variants/lilygo_techo/platformio.ini +++ b/variants/lilygo_techo/platformio.ini @@ -126,3 +126,8 @@ build_src_filter = ${LilyGo_T-Echo.build_src_filter} lib_deps = ${LilyGo_T-Echo.lib_deps} densaugeo/base64 @ ~1.4.0 + +[env:LilyGo_T-Echo_kiss_modem] +extends = LilyGo_T-Echo +build_src_filter = ${LilyGo_T-Echo.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/lilygo_techo_lite/platformio.ini b/variants/lilygo_techo_lite/platformio.ini index 88616858..d3408f95 100644 --- a/variants/lilygo_techo_lite/platformio.ini +++ b/variants/lilygo_techo_lite/platformio.ini @@ -140,3 +140,8 @@ build_src_filter = ${nrf52_base.build_src_filter} lib_deps = ${LilyGo_T-Echo-Lite.lib_deps} densaugeo/base64 @ ~1.4.0 + +[env:LilyGo_T-Echo-Lite_kiss_modem] +extends = LilyGo_T-Echo-Lite +build_src_filter = ${LilyGo_T-Echo-Lite.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/lilygo_tlora_c6/platformio.ini b/variants/lilygo_tlora_c6/platformio.ini index b06a0b7c..3acfa761 100644 --- a/variants/lilygo_tlora_c6/platformio.ini +++ b/variants/lilygo_tlora_c6/platformio.ini @@ -84,3 +84,8 @@ build_src_filter = ${tlora_c6.build_src_filter} lib_deps = ${tlora_c6.lib_deps} densaugeo/base64 @ ~1.4.0 + +[env:LilyGo_Tlora_C6_kiss_modem] +extends = tlora_c6 +build_src_filter = ${tlora_c6.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/lilygo_tlora_v2_1/platformio.ini b/variants/lilygo_tlora_v2_1/platformio.ini index 3641f127..f710d070 100644 --- a/variants/lilygo_tlora_v2_1/platformio.ini +++ b/variants/lilygo_tlora_v2_1/platformio.ini @@ -192,3 +192,8 @@ build_flags = lib_deps = ${LilyGo_TLora_V2_1_1_6.lib_deps} ${esp32_ota.lib_deps} + +[env:LilyGo_TLora_V2_1_1_6_kiss_modem] +extends = LilyGo_TLora_V2_1_1_6 +build_src_filter = ${LilyGo_TLora_V2_1_1_6.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/m5stack_unit_c6l/platformio.ini b/variants/m5stack_unit_c6l/platformio.ini index 84c6562a..94083eb4 100644 --- a/variants/m5stack_unit_c6l/platformio.ini +++ b/variants/m5stack_unit_c6l/platformio.ini @@ -105,3 +105,8 @@ lib_deps = ${M5Stack_Unit_C6L.lib_deps} densaugeo/base64 @ ~1.4.0 end2endzone/NonBlockingRTTTL@^1.3.0 + +[env:M5Stack_Unit_C6L_kiss_modem] +extends = M5Stack_Unit_C6L +build_src_filter = ${M5Stack_Unit_C6L.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/mesh_pocket/platformio.ini b/variants/mesh_pocket/platformio.ini index 015c2ca4..52a0d835 100644 --- a/variants/mesh_pocket/platformio.ini +++ b/variants/mesh_pocket/platformio.ini @@ -109,4 +109,9 @@ build_src_filter = ${Mesh_pocket.build_src_filter} +<../examples/companion_radio/ui-new/*.cpp> lib_deps = ${Mesh_pocket.lib_deps} - densaugeo/base64 @ ~1.4.0 \ No newline at end of file + densaugeo/base64 @ ~1.4.0 + +[env:Mesh_pocket_kiss_modem] +extends = Mesh_pocket +build_src_filter = ${Mesh_pocket.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/meshadventurer/platformio.ini b/variants/meshadventurer/platformio.ini index 18b64ac3..2006a180 100644 --- a/variants/meshadventurer/platformio.ini +++ b/variants/meshadventurer/platformio.ini @@ -29,6 +29,7 @@ build_flags = build_src_filter = ${esp32_base.build_src_filter} +<../variants/meshadventurer> + + + lib_deps = ${esp32_base.lib_deps} stevemarple/MicroNMEA @ ^2.0.6 @@ -38,7 +39,6 @@ lib_deps = extends = Meshadventurer build_src_filter = ${Meshadventurer.build_src_filter} +<../examples/simple_repeater> - + build_flags = ${Meshadventurer.build_flags} -D RADIO_CLASS=CustomSX1262 @@ -60,7 +60,6 @@ lib_deps = ; build_src_filter = ${Meshadventurer.build_src_filter} ; + ; +<../examples/simple_repeater> -; + ; build_flags = ; ${Meshadventurer.build_flags} ; -D RADIO_CLASS=CustomSX1262 @@ -86,7 +85,6 @@ extends = Meshadventurer build_src_filter = ${Meshadventurer.build_src_filter} + +<../examples/simple_repeater> - + build_flags = ${Meshadventurer.build_flags} -D RADIO_CLASS=CustomSX1262 @@ -109,7 +107,6 @@ lib_deps = extends = Meshadventurer build_src_filter = ${Meshadventurer.build_src_filter} +<../examples/simple_repeater> - + build_flags = ${Meshadventurer.build_flags} -D RADIO_CLASS=CustomSX1268 @@ -157,7 +154,6 @@ extends = Meshadventurer build_src_filter = ${Meshadventurer.build_src_filter} + +<../examples/simple_repeater> - + build_flags = ${Meshadventurer.build_flags} -D RADIO_CLASS=CustomSX1268 @@ -179,8 +175,6 @@ lib_deps = [env:Meshadventurer_sx1262_companion_radio_usb] extends = Meshadventurer build_src_filter = ${Meshadventurer.build_src_filter} - +<../examples/companion_radio/*.cpp> - + +<../examples/companion_radio/*.cpp> +<../examples/companion_radio/ui-new/*.cpp> build_flags = @@ -200,9 +194,7 @@ lib_deps = [env:Meshadventurer_sx1262_companion_radio_ble] extends = Meshadventurer build_src_filter = ${Meshadventurer.build_src_filter} - +<../examples/companion_radio/*.cpp> + - + +<../examples/companion_radio/*.cpp> +<../examples/companion_radio/ui-new/*.cpp> build_flags = @@ -235,7 +227,6 @@ build_flags = ; -D MESH_DEBUG=1 build_src_filter = ${Meshadventurer.build_src_filter} +<../examples/simple_secure_chat/main.cpp> - + lib_deps = ${Meshadventurer.lib_deps} densaugeo/base64 @ ~1.4.0 @@ -256,7 +247,6 @@ build_flags = ; -D MESH_DEBUG=1 build_src_filter = ${Meshadventurer.build_src_filter} +<../examples/simple_room_server> - + lib_deps = ${Meshadventurer.lib_deps} ${esp32_ota.lib_deps} @@ -264,8 +254,6 @@ lib_deps = [env:Meshadventurer_sx1268_companion_radio_usb] extends = Meshadventurer build_src_filter = ${Meshadventurer.build_src_filter} - +<../examples/companion_radio/*.cpp> - + +<../examples/companion_radio/*.cpp> +<../examples/companion_radio/ui-new/*.cpp> build_flags = @@ -285,9 +273,7 @@ lib_deps = [env:Meshadventurer_sx1268_companion_radio_ble] extends = Meshadventurer build_src_filter = ${Meshadventurer.build_src_filter} - +<../examples/companion_radio/*.cpp> + - + +<../examples/companion_radio/*.cpp> +<../examples/companion_radio/ui-new/*.cpp> build_flags = @@ -320,7 +306,6 @@ build_flags = ; -D MESH_DEBUG=1 build_src_filter = ${Meshadventurer.build_src_filter} +<../examples/simple_secure_chat/main.cpp> - + lib_deps = ${Meshadventurer.lib_deps} densaugeo/base64 @ ~1.4.0 @@ -341,7 +326,24 @@ build_flags = ; -D MESH_DEBUG=1 build_src_filter = ${Meshadventurer.build_src_filter} +<../examples/simple_room_server> - + lib_deps = ${Meshadventurer.lib_deps} - ${esp32_ota.lib_deps} \ No newline at end of file + ${esp32_ota.lib_deps} + +[env:Meshadventurer_sx1262_kiss_modem] +extends = Meshadventurer +build_src_filter = ${Meshadventurer.build_src_filter} + +<../examples/kiss_modem/> +build_flags = ${Meshadventurer.build_flags} + -D RADIO_CLASS=CustomSX1262 + -D WRAPPER_CLASS=CustomSX1262Wrapper + -D LORA_TX_POWER=22 + +[env:Meshadventurer_sx1268_kiss_modem] +extends = Meshadventurer +build_src_filter = ${Meshadventurer.build_src_filter} + +<../examples/kiss_modem/> +build_flags = ${Meshadventurer.build_flags} + -D RADIO_CLASS=CustomSX1268 + -D WRAPPER_CLASS=CustomSX1268Wrapper + -D LORA_TX_POWER=22 diff --git a/variants/meshtiny/platformio.ini b/variants/meshtiny/platformio.ini index 0d5de517..c5439c88 100644 --- a/variants/meshtiny/platformio.ini +++ b/variants/meshtiny/platformio.ini @@ -67,3 +67,8 @@ build_src_filter = ${Meshtiny.build_src_filter} lib_deps = ${Meshtiny.lib_deps} densaugeo/base64 @ ~1.4.0 + +[env:Meshtiny_kiss_modem] +extends = Meshtiny +build_src_filter = ${Meshtiny.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/minewsemi_me25ls01/platformio.ini b/variants/minewsemi_me25ls01/platformio.ini index dacd8d34..ab609882 100644 --- a/variants/minewsemi_me25ls01/platformio.ini +++ b/variants/minewsemi_me25ls01/platformio.ini @@ -1,171 +1,175 @@ -; ----------------- NRF52 me25ls01--------------------- -[nrf52840_me25ls01] -extends = nrf52_base -platform_packages = framework-arduinoadafruitnrf52 -build_flags = ${nrf52_base.build_flags} - -I src/helpers/nrf52 - -I lib/nrf52/s140_nrf52_7.3.0_API/include - -I lib/nrf52/s140_nrf52_7.3.0_API/include/nrf52 -lib_ignore = - BluetoothOTA - lib5b4 -lib_deps = - ${nrf52_base.lib_deps} - rweather/Crypto @ ^0.4.0 - -[me25ls01] -extends = nrf52840_me25ls01 -board = minewsemi_me25ls01 -board_build.ldscript = boards/nrf52840_s140_v7.ld -build_flags = ${nrf52840_me25ls01.build_flags} - -I variants/minewsemi_me25ls01 - -D me25ls01 - -D PIN_USER_BTN=27 - -D PIN_STATUS_LED=39 - -D P_LORA_TX_LED=22 - -D RADIO_CLASS=CustomLR1110 - -D WRAPPER_CLASS=CustomLR1110Wrapper - -D LORA_TX_POWER=22 - -D ENV_INCLUDE_GPS=0 - -D ENV_INCLUDE_AHTX0=1 - -D ENV_INCLUDE_BME280=1 - -D ENV_INCLUDE_INA3221=1 - -D ENV_INCLUDE_INA219=1 -build_src_filter = ${nrf52840_me25ls01.build_src_filter} - + - +<../variants/minewsemi_me25ls01> - + -debug_tool = jlink -upload_protocol = nrfutil -lib_deps = ${nrf52840_me25ls01.lib_deps} - densaugeo/base64 @ ~1.4.0 - stevemarple/MicroNMEA @ ^2.0.6 - end2endzone/NonBlockingRTTTL@^1.3.0 - adafruit/Adafruit SSD1306 @ ^2.5.13 - adafruit/Adafruit INA3221 Library @ ^1.0.1 - adafruit/Adafruit INA219 @ ^1.2.3 - adafruit/Adafruit AHTX0 @ ^2.0.5 - adafruit/Adafruit BME280 Library @ ^2.3.0 - -[env:Minewsemi_me25ls01_companion_radio_ble] -extends = me25ls01 -board_build.ldscript = boards/nrf52840_s140_v7_extrafs.ld -board_upload.maximum_size = 708608 -build_flags = ${me25ls01.build_flags} - -I examples/companion_radio/ui-orig - -D MAX_CONTACTS=350 - -D MAX_GROUP_CHANNELS=40 - -D BLE_PIN_CODE=123456 -; -D BLE_DEBUG_LOGGING=1 - -D MESH_PACKET_LOGGING=1 - -D MESH_DEBUG=1 - -D OFFLINE_QUEUE_SIZE=256 - -D RX_BOOSTED_GAIN=true - -D RF_SWITCH_TABLE - -D DISPLAY_CLASS=NullDisplayDriver - ;-D PIN_BUZZER=25 - ;-D PIN_BUZZER_EN=37 -build_src_filter = ${me25ls01.build_src_filter} - + - +<../examples/companion_radio/*.cpp> - +<../examples/companion_radio/ui-orig/*.cpp> -lib_deps = ${me25ls01.lib_deps} - adafruit/RTClib @ ^2.1.3 - - -[env:Minewsemi_me25ls01_repeater] -extends = me25ls01 -build_flags = ${me25ls01.build_flags} - -D MAX_CONTACTS=100 - -D MAX_GROUP_CHANNELS=8 - -D BLE_PIN_CODE=123456 -; -D BLE_DEBUG_LOGGING=1 - -D MESH_PACKET_LOGGING=1 - -D MESH_DEBUG=1 - -D OFFLINE_QUEUE_SIZE=256 - -D RX_BOOSTED_GAIN=true - -D RF_SWITCH_TABLE - -D ADVERT_NAME='"ME25LS01 Repeater"' - -D ADVERT_LAT=0.0 - -D ADVERT_LON=0.0 - -D ADMIN_PASSWORD='"password"' - -D MAX_NEIGHBOURS=50 - -D DISPLAY_CLASS=NullDisplayDriver -build_src_filter = ${me25ls01.build_src_filter} - +<../examples/simple_repeater> -lib_deps = ${me25ls01.lib_deps} - adafruit/RTClib @ ^2.1.3 - - - -[env:Minewsemi_me25ls01_room_server] -extends = me25ls01 -build_flags = ${me25ls01.build_flags} - -D MAX_CONTACTS=100 - -D MAX_GROUP_CHANNELS=8 -; -D BLE_PIN_CODE=123456 -; -D BLE_DEBUG_LOGGING=1 -; -D MESH_PACKET_LOGGING=1 -; -D MESH_DEBUG=1 - -D OFFLINE_QUEUE_SIZE=256 - -D RX_BOOSTED_GAIN=true - -D RF_SWITCH_TABLE - -D ADVERT_NAME='"ME25LS01 Room"' - -D ADVERT_LAT=0.0 - -D ADVERT_LON=0.0 - -D ADMIN_PASSWORD='"password"' - -D ROOM_PASSWORD='"hello"' - -D MAX_NEIGHBOURS=50 - -D DISPLAY_CLASS=NullDisplayDriver -build_src_filter = ${me25ls01.build_src_filter} - +<../examples/simple_room_server> -lib_deps = ${me25ls01.lib_deps} - adafruit/RTClib @ ^2.1.3 - -[env:Minewsemi_me25ls01_terminal_chat] -extends = me25ls01 -build_flags = ${me25ls01.build_flags} - -D MAX_CONTACTS=100 - -D MAX_GROUP_CHANNELS=8 - -D BLE_PIN_CODE=123456 -; -D BLE_DEBUG_LOGGING=1 - -D MESH_PACKET_LOGGING=1 - -D MESH_DEBUG=1 - -D OFFLINE_QUEUE_SIZE=256 - -D RX_BOOSTED_GAIN=true - -D RF_SWITCH_TABLE - -D ADVERT_NAME='"ME25LS01 Chat"' - -D ADVERT_LAT=0.0 - -D ADVERT_LON=0.0 - -D ADMIN_PASSWORD='"password"' - -D ROOM_PASSWORD='"hello"' - -D MAX_NEIGHBOURS=50 - -D DISPLAY_CLASS=NullDisplayDriver -build_src_filter = ${me25ls01.build_src_filter} - +<../examples/simple_secure_chat/main.cpp> -lib_deps = ${me25ls01.lib_deps} - adafruit/RTClib @ ^2.1.3 - -[env:Minewsemi_me25ls01_companion_radio_usb] -extends = me25ls01 -board_build.ldscript = boards/nrf52840_s140_v7_extrafs.ld -board_upload.maximum_size = 708608 -build_flags = ${me25ls01.build_flags} - -I examples/companion_radio/ui-orig - -D MAX_CONTACTS=350 - -D MAX_GROUP_CHANNELS=40 - ;-D BLE_PIN_CODE=123456 -; -D BLE_DEBUG_LOGGING=1 - -D MESH_PACKET_LOGGING=1 - -D MESH_DEBUG=1 - -D OFFLINE_QUEUE_SIZE=256 - -D RX_BOOSTED_GAIN=true - -D RF_SWITCH_TABLE - -D DISPLAY_CLASS=NullDisplayDriver -build_src_filter = ${me25ls01.build_src_filter} - + - +<../examples/companion_radio/*.cpp> - +<../examples/companion_radio/ui-orig/*.cpp> -lib_deps = ${me25ls01.lib_deps} - adafruit/RTClib @ ^2.1.3 - +; ----------------- NRF52 me25ls01--------------------- +[nrf52840_me25ls01] +extends = nrf52_base +platform_packages = framework-arduinoadafruitnrf52 +build_flags = ${nrf52_base.build_flags} + -I src/helpers/nrf52 + -I lib/nrf52/s140_nrf52_7.3.0_API/include + -I lib/nrf52/s140_nrf52_7.3.0_API/include/nrf52 +lib_ignore = + BluetoothOTA + lib5b4 +lib_deps = + ${nrf52_base.lib_deps} + rweather/Crypto @ ^0.4.0 + +[me25ls01] +extends = nrf52840_me25ls01 +board = minewsemi_me25ls01 +board_build.ldscript = boards/nrf52840_s140_v7.ld +build_flags = ${nrf52840_me25ls01.build_flags} + -I variants/minewsemi_me25ls01 + -D me25ls01 + -D PIN_USER_BTN=27 + -D PIN_STATUS_LED=39 + -D P_LORA_TX_LED=22 + -D RADIO_CLASS=CustomLR1110 + -D WRAPPER_CLASS=CustomLR1110Wrapper + -D LORA_TX_POWER=22 + -D ENV_INCLUDE_GPS=0 + -D ENV_INCLUDE_AHTX0=1 + -D ENV_INCLUDE_BME280=1 + -D ENV_INCLUDE_INA3221=1 + -D ENV_INCLUDE_INA219=1 +build_src_filter = ${nrf52840_me25ls01.build_src_filter} + + + +<../variants/minewsemi_me25ls01> + + +debug_tool = jlink +upload_protocol = nrfutil +lib_deps = ${nrf52840_me25ls01.lib_deps} + densaugeo/base64 @ ~1.4.0 + stevemarple/MicroNMEA @ ^2.0.6 + end2endzone/NonBlockingRTTTL@^1.3.0 + adafruit/Adafruit SSD1306 @ ^2.5.13 + adafruit/Adafruit INA3221 Library @ ^1.0.1 + adafruit/Adafruit INA219 @ ^1.2.3 + adafruit/Adafruit AHTX0 @ ^2.0.5 + adafruit/Adafruit BME280 Library @ ^2.3.0 + +[env:Minewsemi_me25ls01_companion_radio_ble] +extends = me25ls01 +board_build.ldscript = boards/nrf52840_s140_v7_extrafs.ld +board_upload.maximum_size = 708608 +build_flags = ${me25ls01.build_flags} + -I examples/companion_radio/ui-orig + -D MAX_CONTACTS=350 + -D MAX_GROUP_CHANNELS=40 + -D BLE_PIN_CODE=123456 +; -D BLE_DEBUG_LOGGING=1 + -D MESH_PACKET_LOGGING=1 + -D MESH_DEBUG=1 + -D OFFLINE_QUEUE_SIZE=256 + -D RX_BOOSTED_GAIN=true + -D RF_SWITCH_TABLE + -D DISPLAY_CLASS=NullDisplayDriver + ;-D PIN_BUZZER=25 + ;-D PIN_BUZZER_EN=37 +build_src_filter = ${me25ls01.build_src_filter} + + + +<../examples/companion_radio/*.cpp> + +<../examples/companion_radio/ui-orig/*.cpp> +lib_deps = ${me25ls01.lib_deps} + adafruit/RTClib @ ^2.1.3 + + +[env:Minewsemi_me25ls01_repeater] +extends = me25ls01 +build_flags = ${me25ls01.build_flags} + -D MAX_CONTACTS=100 + -D MAX_GROUP_CHANNELS=8 + -D BLE_PIN_CODE=123456 +; -D BLE_DEBUG_LOGGING=1 + -D MESH_PACKET_LOGGING=1 + -D MESH_DEBUG=1 + -D OFFLINE_QUEUE_SIZE=256 + -D RX_BOOSTED_GAIN=true + -D RF_SWITCH_TABLE + -D ADVERT_NAME='"ME25LS01 Repeater"' + -D ADVERT_LAT=0.0 + -D ADVERT_LON=0.0 + -D ADMIN_PASSWORD='"password"' + -D MAX_NEIGHBOURS=50 + -D DISPLAY_CLASS=NullDisplayDriver +build_src_filter = ${me25ls01.build_src_filter} + +<../examples/simple_repeater> +lib_deps = ${me25ls01.lib_deps} + adafruit/RTClib @ ^2.1.3 + + + +[env:Minewsemi_me25ls01_room_server] +extends = me25ls01 +build_flags = ${me25ls01.build_flags} + -D MAX_CONTACTS=100 + -D MAX_GROUP_CHANNELS=8 +; -D BLE_PIN_CODE=123456 +; -D BLE_DEBUG_LOGGING=1 +; -D MESH_PACKET_LOGGING=1 +; -D MESH_DEBUG=1 + -D OFFLINE_QUEUE_SIZE=256 + -D RX_BOOSTED_GAIN=true + -D RF_SWITCH_TABLE + -D ADVERT_NAME='"ME25LS01 Room"' + -D ADVERT_LAT=0.0 + -D ADVERT_LON=0.0 + -D ADMIN_PASSWORD='"password"' + -D ROOM_PASSWORD='"hello"' + -D MAX_NEIGHBOURS=50 + -D DISPLAY_CLASS=NullDisplayDriver +build_src_filter = ${me25ls01.build_src_filter} + +<../examples/simple_room_server> +lib_deps = ${me25ls01.lib_deps} + adafruit/RTClib @ ^2.1.3 + +[env:Minewsemi_me25ls01_terminal_chat] +extends = me25ls01 +build_flags = ${me25ls01.build_flags} + -D MAX_CONTACTS=100 + -D MAX_GROUP_CHANNELS=8 + -D BLE_PIN_CODE=123456 +; -D BLE_DEBUG_LOGGING=1 + -D MESH_PACKET_LOGGING=1 + -D MESH_DEBUG=1 + -D OFFLINE_QUEUE_SIZE=256 + -D RX_BOOSTED_GAIN=true + -D RF_SWITCH_TABLE + -D ADVERT_NAME='"ME25LS01 Chat"' + -D ADVERT_LAT=0.0 + -D ADVERT_LON=0.0 + -D ADMIN_PASSWORD='"password"' + -D ROOM_PASSWORD='"hello"' + -D MAX_NEIGHBOURS=50 + -D DISPLAY_CLASS=NullDisplayDriver +build_src_filter = ${me25ls01.build_src_filter} + +<../examples/simple_secure_chat/main.cpp> +lib_deps = ${me25ls01.lib_deps} + adafruit/RTClib @ ^2.1.3 + +[env:Minewsemi_me25ls01_companion_radio_usb] +extends = me25ls01 +board_build.ldscript = boards/nrf52840_s140_v7_extrafs.ld +board_upload.maximum_size = 708608 +build_flags = ${me25ls01.build_flags} + -I examples/companion_radio/ui-orig + -D MAX_CONTACTS=350 + -D MAX_GROUP_CHANNELS=40 + ;-D BLE_PIN_CODE=123456 +; -D BLE_DEBUG_LOGGING=1 + -D MESH_PACKET_LOGGING=1 + -D MESH_DEBUG=1 + -D OFFLINE_QUEUE_SIZE=256 + -D RX_BOOSTED_GAIN=true + -D RF_SWITCH_TABLE + -D DISPLAY_CLASS=NullDisplayDriver +build_src_filter = ${me25ls01.build_src_filter} + + + +<../examples/companion_radio/*.cpp> + +<../examples/companion_radio/ui-orig/*.cpp> +lib_deps = ${me25ls01.lib_deps} + adafruit/RTClib @ ^2.1.3 + +[env:Minewsemi_me25ls01_kiss_modem] +extends = me25ls01 +build_src_filter = ${me25ls01.build_src_filter} + +<../examples/kiss_modem/> \ No newline at end of file diff --git a/variants/muziworks_r1_neo/platformio.ini b/variants/muziworks_r1_neo/platformio.ini index 39ef8728..3dbecf1e 100644 --- a/variants/muziworks_r1_neo/platformio.ini +++ b/variants/muziworks_r1_neo/platformio.ini @@ -130,3 +130,8 @@ build_flags = -D MESH_DEBUG=1 build_src_filter = ${R1Neo.build_src_filter} +<../examples/simple_sensor> + +[env:R1Neo_kiss_modem] +extends = R1Neo +build_src_filter = ${R1Neo.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/nano_g2_ultra/platformio.ini b/variants/nano_g2_ultra/platformio.ini index 116a1f25..fa1b5ef1 100644 --- a/variants/nano_g2_ultra/platformio.ini +++ b/variants/nano_g2_ultra/platformio.ini @@ -91,3 +91,8 @@ lib_deps = adafruit/Adafruit GFX Library @ ^1.12.1 stevemarple/MicroNMEA @ ^2.0.6 end2endzone/NonBlockingRTTTL@^1.3.0 + +[env:Nano_G2_Ultra_kiss_modem] +extends = Nano_G2_Ultra +build_src_filter = ${Nano_G2_Ultra.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/nibble_screen_connect/platformio.ini b/variants/nibble_screen_connect/platformio.ini index 8a4e63ca..a496a2fe 100644 --- a/variants/nibble_screen_connect/platformio.ini +++ b/variants/nibble_screen_connect/platformio.ini @@ -159,3 +159,8 @@ lib_deps = ${nibble_screen_connect_base.lib_deps} densaugeo/base64 @ ~1.4.0 + +[env:nibble_screen_connect_kiss_modem] +extends = nibble_screen_connect_base +build_src_filter = ${nibble_screen_connect_base.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/promicro/platformio.ini b/variants/promicro/platformio.ini index 317537a9..a0477e17 100644 --- a/variants/promicro/platformio.ini +++ b/variants/promicro/platformio.ini @@ -171,3 +171,8 @@ build_src_filter = ${Promicro.build_src_filter} +<../examples/simple_sensor> lib_deps = ${Promicro.lib_deps} + +[env:ProMicro_kiss_modem] +extends = Promicro +build_src_filter = ${Promicro.build_src_filter} + +<../examples/kiss_modem/> \ No newline at end of file diff --git a/variants/rak11310/platformio.ini b/variants/rak11310/platformio.ini index d5537627..3019f9c5 100644 --- a/variants/rak11310/platformio.ini +++ b/variants/rak11310/platformio.ini @@ -132,3 +132,8 @@ build_src_filter = ${rak11310.build_src_filter} +<../examples/simple_secure_chat/main.cpp> lib_deps = ${rak11310.lib_deps} densaugeo/base64 @ ~1.4.0 + +[env:RAK_11310_kiss_modem] +extends = rak11310 +build_src_filter = ${rak11310.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/rak3112/platformio.ini b/variants/rak3112/platformio.ini index b4165bb2..9cd32c4b 100644 --- a/variants/rak3112/platformio.ini +++ b/variants/rak3112/platformio.ini @@ -204,3 +204,8 @@ build_src_filter = ${rak3112.build_src_filter} lib_deps = ${rak3112.lib_deps} ${esp32_ota.lib_deps} + +[env:RAK_3112_kiss_modem] +extends = rak3112 +build_src_filter = ${rak3112.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/rak3401/platformio.ini b/variants/rak3401/platformio.ini index 3d2d4a3e..b5014097 100644 --- a/variants/rak3401/platformio.ini +++ b/variants/rak3401/platformio.ini @@ -126,3 +126,8 @@ build_flags = build_src_filter = ${rak3401.build_src_filter} + +<../examples/simple_sensor> + +[env:RAK_3401_kiss_modem] +extends = rak3401 +build_src_filter = ${rak3401.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/rak3x72/platformio.ini b/variants/rak3x72/platformio.ini index 12ea413a..f9667860 100644 --- a/variants/rak3x72/platformio.ini +++ b/variants/rak3x72/platformio.ini @@ -41,3 +41,8 @@ build_src_filter = ${rak3x72.build_src_filter} +<../examples/companion_radio/*.cpp> lib_deps = ${rak3x72.lib_deps} densaugeo/base64 @ ~1.4.0 + +[env:RAK_3x72_kiss_modem] +extends = rak3x72 +build_src_filter = ${rak3x72.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/rak_wismesh_tag/platformio.ini b/variants/rak_wismesh_tag/platformio.ini index 081cb0d0..29124daf 100644 --- a/variants/rak_wismesh_tag/platformio.ini +++ b/variants/rak_wismesh_tag/platformio.ini @@ -118,4 +118,9 @@ build_flags = ; -D MESH_PACKET_LOGGING=1 -D MESH_DEBUG=1 build_src_filter = ${rak4631.build_src_filter} - +<../examples/simple_sensor> \ No newline at end of file + +<../examples/simple_sensor> + +[env:RAK_WisMesh_Tag_kiss_modem] +extends = rak_wismesh_tag +build_src_filter = ${rak_wismesh_tag.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/rpi_picow/platformio.ini b/variants/rpi_picow/platformio.ini index 2d261b25..9253d36f 100644 --- a/variants/rpi_picow/platformio.ini +++ b/variants/rpi_picow/platformio.ini @@ -106,3 +106,8 @@ build_src_filter = ${rpi_picow.build_src_filter} +<../examples/simple_secure_chat/main.cpp> lib_deps = ${rpi_picow.lib_deps} densaugeo/base64 @ ~1.4.0 + +[env:PicoW_kiss_modem] +extends = rpi_picow +build_src_filter = ${rpi_picow.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/station_g2/platformio.ini b/variants/station_g2/platformio.ini index 87e77152..6432b523 100644 --- a/variants/station_g2/platformio.ini +++ b/variants/station_g2/platformio.ini @@ -238,3 +238,8 @@ build_src_filter = ${Station_G2.build_src_filter} lib_deps = ${Station_G2.lib_deps} densaugeo/base64 @ ~1.4.0 + +[env:Station_G2_kiss_modem] +extends = Station_G2 +build_src_filter = ${Station_G2.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/t1000-e/platformio.ini b/variants/t1000-e/platformio.ini index 429390c4..fb88e334 100644 --- a/variants/t1000-e/platformio.ini +++ b/variants/t1000-e/platformio.ini @@ -117,3 +117,10 @@ lib_deps = ${t1000-e.lib_deps} densaugeo/base64 @ ~1.4.0 stevemarple/MicroNMEA @ ^2.0.6 end2endzone/NonBlockingRTTTL@^1.3.0 + +[env:t1000e_kiss_modem] +extends = t1000-e +build_src_filter = ${t1000-e.build_src_filter} + +<../examples/kiss_modem/> +lib_deps = ${t1000-e.lib_deps} + stevemarple/MicroNMEA @ ^2.0.6 diff --git a/variants/tenstar_c3/platformio.ini b/variants/tenstar_c3/platformio.ini index 183a5684..e7988823 100644 --- a/variants/tenstar_c3/platformio.ini +++ b/variants/tenstar_c3/platformio.ini @@ -161,3 +161,23 @@ build_flags = lib_deps = ${Tenstar_esp32_C3.lib_deps} ${esp32_ota.lib_deps} + +[env:Tenstar_C3_sx1262_kiss_modem] +extends = Tenstar_esp32_C3 +build_src_filter = ${Tenstar_esp32_C3.build_src_filter} + +<../examples/kiss_modem/> +build_flags = + ${Tenstar_esp32_C3.build_flags} + -D RADIO_CLASS=CustomSX1262 + -D WRAPPER_CLASS=CustomSX1262Wrapper + -D LORA_TX_POWER=22 + +[env:Tenstar_C3_sx1268_kiss_modem] +extends = Tenstar_esp32_C3 +build_src_filter = ${Tenstar_esp32_C3.build_src_filter} + +<../examples/kiss_modem/> +build_flags = + ${Tenstar_esp32_C3.build_flags} + -D RADIO_CLASS=CustomSX1268 + -D WRAPPER_CLASS=CustomSX1268Wrapper + -D LORA_TX_POWER=22 diff --git a/variants/thinknode_m1/platformio.ini b/variants/thinknode_m1/platformio.ini index 397bf8e3..356edfee 100644 --- a/variants/thinknode_m1/platformio.ini +++ b/variants/thinknode_m1/platformio.ini @@ -127,4 +127,9 @@ lib_deps = densaugeo/base64 @ ~1.4.0 zinggjm/GxEPD2 @ 1.6.2 bakercp/CRC32 @ ^2.0.0 - end2endzone/NonBlockingRTTTL@^1.3.0 \ No newline at end of file + end2endzone/NonBlockingRTTTL@^1.3.0 + +[env:ThinkNode_M1_kiss_modem] +extends = ThinkNode_M1 +build_src_filter = ${ThinkNode_M1.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/thinknode_m2/platformio.ini b/variants/thinknode_m2/platformio.ini index a765d9c7..99015501 100644 --- a/variants/thinknode_m2/platformio.ini +++ b/variants/thinknode_m2/platformio.ini @@ -209,3 +209,10 @@ build_src_filter = ${ThinkNode_M2.build_src_filter} lib_deps = ${ThinkNode_M2.lib_deps} densaugeo/base64 @ ~1.4.0 + +[env:ThinkNode_M2_kiss_modem] +extends = ThinkNode_M2 +build_flags = ${ThinkNode_M2.build_flags} + -UPIN_BUZZER +build_src_filter = ${ThinkNode_M2.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/thinknode_m3/platformio.ini b/variants/thinknode_m3/platformio.ini index 88fd487a..0a3d4eda 100644 --- a/variants/thinknode_m3/platformio.ini +++ b/variants/thinknode_m3/platformio.ini @@ -17,11 +17,11 @@ build_flags = ${nrf52_base.build_flags} -D RF_SWITCH_TABLE -D RX_BOOSTED_GAIN=true -D P_LORA_BUSY=43 - -D P_LORA_SCLK=45 + -D P_LORA_SCLK=45 -D P_LORA_NSS=44 -D P_LORA_DIO_1=40 -D P_LORA_MISO=47 - -D P_LORA_MOSI=46 + -D P_LORA_MOSI=46 -D P_LORA_RESET=42 -D P_LORA_TX_LED=PIN_LED_BLUE -D P_LORA_TX_LED_ON=LOW @@ -119,3 +119,10 @@ lib_deps = ${ThinkNode_M3.lib_deps} densaugeo/base64 @ ~1.4.0 stevemarple/MicroNMEA @ ^2.0.6 end2endzone/NonBlockingRTTTL@^1.3.0 + +[env:ThinkNode_M3_kiss_modem] +extends = ThinkNode_M3 +build_src_filter = ${ThinkNode_M3.build_src_filter} + +<../examples/kiss_modem/> +lib_deps = ${ThinkNode_M3.lib_deps} + stevemarple/MicroNMEA @ ^2.0.6 diff --git a/variants/thinknode_m5/platformio.ini b/variants/thinknode_m5/platformio.ini index 16df472a..8572d1eb 100644 --- a/variants/thinknode_m5/platformio.ini +++ b/variants/thinknode_m5/platformio.ini @@ -227,3 +227,8 @@ lib_deps = ${ThinkNode_M5.lib_deps} densaugeo/base64 @ ~1.4.0 end2endzone/NonBlockingRTTTL@^1.3.0 + +[env:ThinkNode_M5_kiss_modem] +extends = ThinkNode_M5 +build_src_filter = ${ThinkNode_M5.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/thinknode_m6/platformio.ini b/variants/thinknode_m6/platformio.ini index 2bd34f31..6fe90436 100644 --- a/variants/thinknode_m6/platformio.ini +++ b/variants/thinknode_m6/platformio.ini @@ -116,4 +116,9 @@ build_src_filter = ${ThinkNode_M6.build_src_filter} lib_deps = ${ThinkNode_M6.lib_deps} densaugeo/base64 @ ~1.4.0 - end2endzone/NonBlockingRTTTL@^1.3.0 \ No newline at end of file + end2endzone/NonBlockingRTTTL@^1.3.0 + +[env:ThinkNode_M6_kiss_modem] +extends = ThinkNode_M6 +build_src_filter = ${ThinkNode_M6.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/tiny_relay/platformio.ini b/variants/tiny_relay/platformio.ini index ed178727..82cb251f 100644 --- a/variants/tiny_relay/platformio.ini +++ b/variants/tiny_relay/platformio.ini @@ -48,3 +48,8 @@ build_src_filter = ${Tiny_Relay.build_src_filter} +<../examples/companion_radio/*.cpp> lib_deps = ${Tiny_Relay.lib_deps} densaugeo/base64 @ ~1.4.0 + +[env:Tiny_Relay_kiss_modem] +extends = Tiny_Relay +build_src_filter = ${Tiny_Relay.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/waveshare_rp2040_lora/platformio.ini b/variants/waveshare_rp2040_lora/platformio.ini index 880f238f..36658d82 100644 --- a/variants/waveshare_rp2040_lora/platformio.ini +++ b/variants/waveshare_rp2040_lora/platformio.ini @@ -131,3 +131,8 @@ build_src_filter = ${waveshare_rp2040_lora.build_src_filter} +<../examples/simple_secure_chat/main.cpp> lib_deps = ${waveshare_rp2040_lora.lib_deps} densaugeo/base64 @ ~1.4.0 + +[env:waveshare_rp2040_lora_kiss_modem] +extends = waveshare_rp2040_lora +build_src_filter = ${waveshare_rp2040_lora.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/wio-e5-dev/platformio.ini b/variants/wio-e5-dev/platformio.ini index d7e63c83..22bdc3c8 100644 --- a/variants/wio-e5-dev/platformio.ini +++ b/variants/wio-e5-dev/platformio.ini @@ -5,6 +5,8 @@ board_upload.maximum_size = 229376 ; 32kb for FS build_flags = ${stm32_base.build_flags} -D RADIO_CLASS=CustomSTM32WLx -D WRAPPER_CLASS=CustomSTM32WLxWrapper + -D LORA_TX_POWER=22 + -D SX126X_CURRENT_LIMIT=140 -D SPI_INTERFACES_COUNT=0 -D RX_BOOSTED_GAIN=true -D PIN_SERIAL_RX=PB7 @@ -48,3 +50,8 @@ build_src_filter = ${lora_e5.build_src_filter} +<../examples/companion_radio/*.cpp> lib_deps = ${lora_e5.lib_deps} densaugeo/base64 @ ~1.4.0 + +[env:wio-e5_kiss_modem] +extends = lora_e5 +build_src_filter = ${lora_e5.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/wio-e5-mini/platformio.ini b/variants/wio-e5-mini/platformio.ini index f589ea03..82f01331 100644 --- a/variants/wio-e5-mini/platformio.ini +++ b/variants/wio-e5-mini/platformio.ini @@ -7,6 +7,8 @@ build_flags = ${stm32_base.build_flags} -D WRAPPER_CLASS=CustomSTM32WLxWrapper -D SPI_INTERFACES_COUNT=0 -D RX_BOOSTED_GAIN=true + -D LORA_TX_POWER=22 + -D SX126X_CURRENT_LIMIT=140 -D P_LORA_TX_LED=LED_RED -D PIN_USER_BTN=USER_BTN -I variants/wio-e5-mini @@ -40,10 +42,15 @@ build_flags = ${lora_e5_mini.build_flags} -I examples/companion_radio/ui-orig -D LORA_TX_POWER=22 -D MAX_CONTACTS=100 - -D MAX_GROUP_CHANNELS=8 + -D MAX_GROUP_CHANNELS=8 -D DISPLAY_CLASS=NullDisplayDriver build_src_filter = ${lora_e5_mini.build_src_filter} +<../examples/companion_radio/*.cpp> +<../examples/companion_radio/ui-orig/*.cpp> lib_deps = ${lora_e5_mini.lib_deps} densaugeo/base64 @ ~1.4.0 + +[env:wio-e5-mini_kiss_modem] +extends = lora_e5_mini +build_src_filter = ${lora_e5_mini.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/wio-tracker-l1-eink/platformio.ini b/variants/wio-tracker-l1-eink/platformio.ini index 42c83477..2c74bade 100644 --- a/variants/wio-tracker-l1-eink/platformio.ini +++ b/variants/wio-tracker-l1-eink/platformio.ini @@ -68,3 +68,8 @@ lib_deps = ${WioTrackerL1Eink.lib_deps} densaugeo/base64 @ ~1.4.0 end2endzone/NonBlockingRTTTL@^1.3.0 debug_tool=stlink + +[env:WioTrackerL1Eink_kiss_modem] +extends = WioTrackerL1Eink +build_src_filter = ${WioTrackerL1Eink.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/wio-tracker-l1/platformio.ini b/variants/wio-tracker-l1/platformio.ini index 6c1e8f63..7bb175bb 100644 --- a/variants/wio-tracker-l1/platformio.ini +++ b/variants/wio-tracker-l1/platformio.ini @@ -111,3 +111,8 @@ lib_deps = ${WioTrackerL1.lib_deps} adafruit/RTClib @ ^2.1.3 densaugeo/base64 @ ~1.4.0 end2endzone/NonBlockingRTTTL@^1.3.0 + +[env:WioTrackerL1_kiss_modem] +extends = WioTrackerL1 +build_src_filter = ${WioTrackerL1.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/wio_wm1110/platformio.ini b/variants/wio_wm1110/platformio.ini index ec65e706..a7eac916 100644 --- a/variants/wio_wm1110/platformio.ini +++ b/variants/wio_wm1110/platformio.ini @@ -84,3 +84,8 @@ build_src_filter = ${wio_wm1110.build_src_filter} lib_deps = ${wio_wm1110.lib_deps} densaugeo/base64 @ ~1.4.0 + +[env:wio_wm1110_kiss_modem] +extends = wio_wm1110 +build_src_filter = ${wio_wm1110.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/xiao_c3/platformio.ini b/variants/xiao_c3/platformio.ini index c5254b46..c0e8458d 100644 --- a/variants/xiao_c3/platformio.ini +++ b/variants/xiao_c3/platformio.ini @@ -128,3 +128,8 @@ lib_deps = ${Xiao_esp32_C3.lib_deps} ${esp32_ota.lib_deps} densaugeo/base64 @ ~1.4.0 + +[env:Xiao_C3_kiss_modem] +extends = Xiao_esp32_C3 +build_src_filter = ${Xiao_esp32_C3.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/xiao_c6/platformio.ini b/variants/xiao_c6/platformio.ini index 717be7b9..9f504b8e 100644 --- a/variants/xiao_c6/platformio.ini +++ b/variants/xiao_c6/platformio.ini @@ -184,3 +184,8 @@ build_src_filter = ${WHY2025_badge.build_src_filter} lib_deps = ${WHY2025_badge.lib_deps} densaugeo/base64 @ ~1.4.0 + +[env:Xiao_C6_kiss_modem] +extends = Xiao_C6 +build_src_filter = ${Xiao_C6.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/xiao_rp2040/platformio.ini b/variants/xiao_rp2040/platformio.ini index e5d652c3..9a0fdaf4 100644 --- a/variants/xiao_rp2040/platformio.ini +++ b/variants/xiao_rp2040/platformio.ini @@ -108,3 +108,8 @@ build_src_filter = ${Xiao_rp2040.build_src_filter} +<../examples/simple_secure_chat/main.cpp> lib_deps = ${Xiao_rp2040.lib_deps} densaugeo/base64 @ ~1.4.0 + +[env:Xiao_rp2040_kiss_modem] +extends = Xiao_rp2040 +build_src_filter = ${Xiao_rp2040.build_src_filter} + +<../examples/kiss_modem/> diff --git a/variants/xiao_s3_wio/platformio.ini b/variants/xiao_s3_wio/platformio.ini index 13d40679..db8c5a94 100644 --- a/variants/xiao_s3_wio/platformio.ini +++ b/variants/xiao_s3_wio/platformio.ini @@ -234,3 +234,8 @@ build_flags = lib_deps = ${Xiao_S3_WIO.lib_deps} ${esp32_ota.lib_deps} + +[env:Xiao_S3_WIO_kiss_modem] +extends = Xiao_S3_WIO +build_src_filter = ${Xiao_S3_WIO.build_src_filter} + +<../examples/kiss_modem/> From 0265851621b3c0a821a99eaf4d5ab05e811bc623 Mon Sep 17 00:00:00 2001 From: chrisdavis2110 Date: Tue, 28 Apr 2026 21:26:56 -0700 Subject: [PATCH 47/54] added PIN_USER_BTN_ANA for rak3401 companion usb and companion ble --- examples/companion_radio/ui-new/UITask.cpp | 16 ++++++++-------- variants/rak3401/platformio.ini | 2 ++ 2 files changed, 10 insertions(+), 8 deletions(-) diff --git a/examples/companion_radio/ui-new/UITask.cpp b/examples/companion_radio/ui-new/UITask.cpp index 94a8ee3e..e06a6ecc 100644 --- a/examples/companion_radio/ui-new/UITask.cpp +++ b/examples/companion_radio/ui-new/UITask.cpp @@ -146,7 +146,7 @@ class HomeScreen : public UIScreen { bool sensors_scroll = false; int sensors_scroll_offset = 0; int next_sensors_refresh = 0; - + void refresh_sensors() { if (millis() > next_sensors_refresh) { sensors_lpp.reset(); @@ -170,7 +170,7 @@ class HomeScreen : public UIScreen { public: HomeScreen(UITask* task, mesh::RTCClock* rtc, SensorManager* sensors, NodePrefs* node_prefs) - : _task(task), _rtc(rtc), _sensors(sensors), _node_prefs(node_prefs), _page(0), + : _task(task), _rtc(rtc), _sensors(sensors), _node_prefs(node_prefs), _page(0), _shutdown_init(false), sensors_lpp(200) { } void poll() override { @@ -213,7 +213,7 @@ public: IPAddress ip = WiFi.localIP(); snprintf(tmp, sizeof(tmp), "IP: %d.%d.%d.%d", ip[0], ip[1], ip[2], ip[3]); display.setTextSize(1); - display.drawTextCentered(display.width() / 2, 54, tmp); + display.drawTextCentered(display.width() / 2, 54, tmp); #endif if (_task->hasConnection()) { display.setColor(DisplayDriver::GREEN); @@ -241,10 +241,10 @@ public: } else { sprintf(tmp, "%dh", secs / (60*60)); } - + int timestamp_width = display.getTextWidth(tmp); int max_name_width = display.width() - timestamp_width - 1; - + char filtered_recent_name[sizeof(a->name)]; display.translateUTF8ToBlocks(filtered_recent_name, a->name, sizeof(filtered_recent_name)); display.drawTextEllipsized(0, y, max_name_width, filtered_recent_name); @@ -310,7 +310,7 @@ public: display.drawTextRightAlign(display.width()-1, y, buf); y = y + 12; display.drawTextLeftAlign(0, y, "pos"); - sprintf(buf, "%.4f %.4f", + sprintf(buf, "%.4f %.4f", nmea->getLatitude()/1000000., nmea->getLongitude()/1000000.); display.drawTextRightAlign(display.width()-1, y, buf); y = y + 12; @@ -741,7 +741,7 @@ void UITask::loop() { #endif #if defined(PIN_USER_BTN_ANA) if (abs(millis() - _analogue_pin_read_millis) > 10) { - ev = analog_btn.check(); + int ev = analog_btn.check(); if (ev == BUTTON_EVENT_CLICK) { c = checkDisplayOn(KEY_NEXT); } else if (ev == BUTTON_EVENT_LONG_PRESS) { @@ -878,7 +878,7 @@ bool UITask::getGPSState() { return !strcmp(_sensors->getSettingValue(i), "1"); } } - } + } return false; } diff --git a/variants/rak3401/platformio.ini b/variants/rak3401/platformio.ini index b3693a58..1246b725 100644 --- a/variants/rak3401/platformio.ini +++ b/variants/rak3401/platformio.ini @@ -64,6 +64,7 @@ board_upload.maximum_size = 712704 build_flags = ${rak3401.build_flags} -I examples/companion_radio/ui-new + -D PIN_USER_BTN_ANA=31 -D DISPLAY_CLASS=SSD1306Display -D MAX_CONTACTS=350 -D MAX_GROUP_CHANNELS=40 @@ -83,6 +84,7 @@ board_upload.maximum_size = 712704 build_flags = ${rak3401.build_flags} -I examples/companion_radio/ui-new + -D PIN_USER_BTN_ANA=31 -D PIN_GPS_EN=-1 -D DISPLAY_CLASS=SSD1306Display -D MAX_CONTACTS=350 From 5fbd473298f0e365e0add4df0c9ff8db5083138c Mon Sep 17 00:00:00 2001 From: chrisdavis2110 Date: Tue, 28 Apr 2026 21:59:10 -0700 Subject: [PATCH 48/54] added PIN_GPS_EN=-1 to rak3401 companion usb --- variants/rak3401/platformio.ini | 1 + 1 file changed, 1 insertion(+) diff --git a/variants/rak3401/platformio.ini b/variants/rak3401/platformio.ini index 1246b725..d94db6a5 100644 --- a/variants/rak3401/platformio.ini +++ b/variants/rak3401/platformio.ini @@ -65,6 +65,7 @@ build_flags = ${rak3401.build_flags} -I examples/companion_radio/ui-new -D PIN_USER_BTN_ANA=31 + -D PIN_GPS_EN=-1 -D DISPLAY_CLASS=SSD1306Display -D MAX_CONTACTS=350 -D MAX_GROUP_CHANNELS=40 From 696aae6ed11d7e4d859a5f0b944ef8fdde43ef0a Mon Sep 17 00:00:00 2001 From: Quency-D Date: Wed, 29 Apr 2026 16:20:21 +0800 Subject: [PATCH 49/54] Heltec boards have LNA disabled by default. --- variants/heltec_t096/LoRaFEMControl.h | 2 +- variants/heltec_tracker_v2/LoRaFEMControl.h | 2 +- variants/heltec_v4/LoRaFEMControl.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/variants/heltec_t096/LoRaFEMControl.h b/variants/heltec_t096/LoRaFEMControl.h index fe61b7e4..2c50b742 100644 --- a/variants/heltec_t096/LoRaFEMControl.h +++ b/variants/heltec_t096/LoRaFEMControl.h @@ -16,6 +16,6 @@ class LoRaFEMControl void setLnaCanControl(bool can_control) { lna_can_control = can_control; } private: - bool lna_enabled = true; + bool lna_enabled = false; bool lna_can_control = false; }; diff --git a/variants/heltec_tracker_v2/LoRaFEMControl.h b/variants/heltec_tracker_v2/LoRaFEMControl.h index fe61b7e4..2c50b742 100644 --- a/variants/heltec_tracker_v2/LoRaFEMControl.h +++ b/variants/heltec_tracker_v2/LoRaFEMControl.h @@ -16,6 +16,6 @@ class LoRaFEMControl void setLnaCanControl(bool can_control) { lna_can_control = can_control; } private: - bool lna_enabled = true; + bool lna_enabled = false; bool lna_can_control = false; }; diff --git a/variants/heltec_v4/LoRaFEMControl.h b/variants/heltec_v4/LoRaFEMControl.h index 75452965..13225bd5 100644 --- a/variants/heltec_v4/LoRaFEMControl.h +++ b/variants/heltec_v4/LoRaFEMControl.h @@ -23,7 +23,7 @@ class LoRaFEMControl LoRaFEMType getFEMType(void) const { return fem_type; } private: LoRaFEMType fem_type=OTHER_FEM_TYPES; - bool lna_enabled=true; + bool lna_enabled=false; bool lna_can_control=false; }; From c5bf23f4b1dbf2376dd141b40f21f64b3c623efa Mon Sep 17 00:00:00 2001 From: Wessel Nieboer Date: Thu, 30 Apr 2026 11:12:31 +0200 Subject: [PATCH 50/54] bump simple_sensor version to v1.15.0 --- examples/simple_sensor/SensorMesh.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/examples/simple_sensor/SensorMesh.h b/examples/simple_sensor/SensorMesh.h index ee5d5e02..424b16c1 100644 --- a/examples/simple_sensor/SensorMesh.h +++ b/examples/simple_sensor/SensorMesh.h @@ -34,11 +34,11 @@ #define PERM_RECV_ALERTS_HI (1 << 7) // high priority alerts #ifndef FIRMWARE_BUILD_DATE - #define FIRMWARE_BUILD_DATE "20 Mar 2026" + #define FIRMWARE_BUILD_DATE "19 Apr 2026" #endif #ifndef FIRMWARE_VERSION - #define FIRMWARE_VERSION "v1.14.1" + #define FIRMWARE_VERSION "v1.15.0" #endif #define FIRMWARE_ROLE "sensor" From 2b0f74a7e9e8e72fa398dbc7945b596cb7de8bcc Mon Sep 17 00:00:00 2001 From: liamcottle Date: Thu, 30 Apr 2026 21:36:04 +1200 Subject: [PATCH 51/54] add comments --- platformio.ini | 3 +++ 1 file changed, 3 insertions(+) diff --git a/platformio.ini b/platformio.ini index 6a3c28c3..ba27abb9 100644 --- a/platformio.ini +++ b/platformio.ini @@ -81,6 +81,9 @@ platform = https://github.com/pioarduino/platform-espressif32/releases/download/ extends = arduino_base platform = nordicnrf52 platform_packages = + ; use internal fork that includes patch to ble stack to prevent firmware lockup during rapid connect/disconnect + ; https://github.com/meshcore-dev/MeshCore/pull/1177 + ; https://github.com/meshcore-dev/MeshCore/pull/1295 framework-arduinoadafruitnrf52 @ https://github.com/meshcore-dev/Adafruit_nRF52_Arduino#d541301 extra_scripts = create-uf2.py build_flags = ${arduino_base.build_flags} From 0be082b5f9fef923132efd6a2aa726a56d9b2f07 Mon Sep 17 00:00:00 2001 From: Avi0n <14863961+Avi0n@users.noreply.github.com> Date: Mon, 9 Mar 2026 11:37:58 -0700 Subject: [PATCH 52/54] fix typos --- docs/cli_commands.md | 4 ++-- docs/faq.md | 34 +++++++++++++++++----------------- 2 files changed, 19 insertions(+), 19 deletions(-) diff --git a/docs/cli_commands.md b/docs/cli_commands.md index fb698228..dd2626cc 100644 --- a/docs/cli_commands.md +++ b/docs/cli_commands.md @@ -456,7 +456,7 @@ This document provides an overview of CLI commands that can be sent to MeshCore **Note:** the 'path.hash.mode' sets the low-level ID/hash encoding size used when the repeater adverts. This setting has no impact on what packet ID/hash size this repeater forwards, all sizes should be forwarded on firmware >= 1.14. This feature was added in firmware 1.14 -**Temporary Note:** adverts with ID/hash sizes of 2 or 3 bytes may have limited flood propogation in your network while this feature is new as v1.13.0 firmware and older will drop packets with multibyte path ID/hashes as only 1-byte hashes are suppored. Consider your install base of firmware >=1.14 has reached a criticality for effective network flooding before implementing higher ID/hash sizes. +**Temporary Note:** adverts with ID/hash sizes of 2 or 3 bytes may have limited flood propagation in your network while this feature is new as v1.13.0 firmware and older will drop packets with multibyte path ID/hashes as only 1-byte hashes are supported. Consider your install base of firmware >=1.14 has reached a criticality for effective network flooding before implementing higher ID/hash sizes. --- @@ -927,7 +927,7 @@ region save --- -#### View or change thevalue of a sensor +#### View or change the value of a sensor **Usage:** - `sensor get ` - `sensor set ` diff --git a/docs/faq.md b/docs/faq.md index 3edc0a69..c04eb6aa 100644 --- a/docs/faq.md +++ b/docs/faq.md @@ -23,8 +23,8 @@ A list of frequently-asked questions and answers for MeshCore - [3.3. Q: What is the password to administer a repeater or a room server?](#33-q-what-is-the-password-to-administer-a-repeater-or-a-room-server) - [3.4. Q: What is the password to join a room server?](#34-q-what-is-the-password-to-join-a-room-server) - [3.5. Q: Can I retrieve a repeater's private key or set a repeater's private key?](#35-q-can-i-retrieve-a-repeaters-private-key-or-set-a-repeaters-private-key) - - [3.6. Q: The first byte of my repeater's public key collides with an exisitng repeater on the mesh. How do I get a new private key with a matching public key that has its first byte of my choosing?](#36-q-the-first-byte-of-my-repeaters-public-key-collides-with-an-exisitng-repeater-on-the-mesh--how-do-i-get-a-new-private-key-with-a-matching-public-key-that-has-its-first-byte-of-my-choosing) - - [3.7. Q: My repeater maybe suffering from deafness due to high power interference near my mesh's frequency, it is not hearing other in-range MeshCore radios. What can I do?](#37-q-my-repeater-maybe-suffering-from-deafness-due-to-high-power-interference-near-my-meshs-frequency-it-is-not-hearing-other-in-range-meshcore-radios--what-can-i-do) + - [3.6. Q: The first byte of my repeater's public key collides with an existing repeater on the mesh. How do I get a new private key with a matching public key that has its first byte of my choosing?](#36-q-the-first-byte-of-my-repeaters-public-key-collides-with-an-existing-repeater-on-the-mesh--how-do-i-get-a-new-private-key-with-a-matching-public-key-that-has-its-first-byte-of-my-choosing) + - [3.7. Q: My repeater may be suffering from deafness due to high power interference near my mesh's frequency, it is not hearing other in-range MeshCore radios. What can I do?](#37-q-my-repeater-may-be-suffering-from-deafness-due-to-high-power-interference-near-my-meshs-frequency-it-is-not-hearing-other-in-range-meshcore-radios--what-can-i-do) - [3.8. Q: How do I make my repeater an observer on the mesh?](#38-q-how-do-i-make-my-repeater-an-observer-on-the-mesh) - [3.9. Q: What is multi-byte support? What do 1-byte, 2-byte, 3-byte adverts and messages mean?](#39-q-what-is-multi-byte-support--what-do-1-byte-2-byte-3-byte-adverts-and-messages-mean) - [3.9.1. Q: **What path hash sizes will my repeater forward?**](#391-q-what-path-hash-sizes-will-my-repeater-forward) @@ -39,7 +39,7 @@ A list of frequently-asked questions and answers for MeshCore - [4.3. Q: Why is my T-Deck Plus not getting any satellite lock?](#43-q-why-is-my-t-deck-plus-not-getting-any-satellite-lock) - [4.4. Q: Why is my OG (non-Plus) T-Deck not getting any satellite lock?](#44-q-why-is-my-og-non-plus-t-deck-not-getting-any-satellite-lock) - [4.5. Q: What size of SD card does the T-Deck support?](#45-q-what-size-of-sd-card-does-the-t-deck-support) - - [4.6. Q: what is the public key for the default public channel?](#46-q-what-is-the-public-key-for-the-default-public-channel) + - [4.6. Q: What is the public key for the default public channel?](#46-q-what-is-the-public-key-for-the-default-public-channel) - [4.7. Q: How do I get maps on T-Deck?](#47-q-how-do-i-get-maps-on-t-deck) - [4.8. Q: Where do the map tiles go?](#48-q-where-do-the-map-tiles-go) - [4.9. Q: How to unlock deeper map zoom and server management features on T-Deck?](#49-q-how-to-unlock-deeper-map-zoom-and-server-management-features-on-t-deck) @@ -52,9 +52,9 @@ A list of frequently-asked questions and answers for MeshCore - [5.1. Q: What are BW, SF, and CR?](#51-q-what-are-bw-sf-and-cr) - [5.2. Q: Do MeshCore clients repeat?](#52-q-do-meshcore-clients-repeat) - [5.3. Q: What happens when a node learns a route via a mobile repeater, and that repeater is gone?](#53-q-what-happens-when-a-node-learns-a-route-via-a-mobile-repeater-and-that-repeater-is-gone) - - [5.4. Q: How does a node discovery a path to its destination and then use it to send messages in the future, instead of flooding every message it sends like Meshtastic?](#54-q-how-does-a-node-discovery-a-path-to-its-destination-and-then-use-it-to-send-messages-in-the-future-instead-of-flooding-every-message-it-sends-like-meshtastic) + - [5.4. Q: How does a node discover a path to its destination and then use it to send messages in the future, instead of flooding every message it sends like Meshtastic?](#54-q-how-does-a-node-discover-a-path-to-its-destination-and-then-use-it-to-send-messages-in-the-future-instead-of-flooding-every-message-it-sends-like-meshtastic) - [5.5. Q: Do public channels always flood? Do private channels always flood?](#55-q-do-public-channels-always-flood-do-private-channels-always-flood) - - [5.6. Q: what is the public key for the default public channel?](#56-q-what-is-the-public-key-for-the-default-public-channel) + - [5.6. Q: What is the public key for the default public channel?](#56-q-what-is-the-public-key-for-the-default-public-channel) - [5.7. Q: Is MeshCore open source?](#57-q-is-meshcore-open-source) - [5.8. Q: How can I support MeshCore?](#58-q-how-can-i-support-meshcore) - [5.9. Q: How do I build MeshCore firmware from source?](#59-q-how-do-i-build-meshcore-firmware-from-source) @@ -62,7 +62,7 @@ A list of frequently-asked questions and answers for MeshCore - [5.11. Q: Does MeshCore support ATAK](#511-q-does-meshcore-support-atak) - [5.12. Q: How do I add a node to the MeshCore Map](#512-q-how-do-i-add-a-node-to-the-meshcore-map) - [5.13. Q: Can I use a Raspberry Pi to update a MeshCore radio?](#513-q-can-i-use-a-raspberry-pi-to-update-a-meshcore-radio) - - [5.14. Q: Are there are projects built around MeshCore?](#514-q-are-there-are-projects-built-around-meshcore) + - [5.14. Q: Are there projects built around MeshCore?](#514-q-are-there-projects-built-around-meshcore) - [5.15. Q: Are there client applications for Windows or Mac?](#515-q-are-there-client-applications-for-windows-or-mac) - [5.16. Q: Are there any resources that compare MeshCore to other LoRa systems?](#516-q-are-there-any-resources-that-compare-meshcore-to-other-lora-systems) - [6. Troubleshooting](#6-troubleshooting) @@ -188,7 +188,7 @@ The T-Deck firmware is free to download and most features are available without ### 2.3. Q: What frequencies are supported by MeshCore? **A:** It supports the 868MHz range in the UK/EU and the 915MHz range in New Zealand, Australia, and the USA. Countries and regions in these two frequency ranges are also supported. -Use the smartphone client or the repeater setup feature on there web flasher to set your radios' RF settings by choosing the preset for your regions. +Use the smartphone client or the repeater setup feature on the web flasher to set your radios' RF settings by choosing the preset for your regions. Recently, as of October 2025, many regions have moved to the "narrow" setting, aka using BW62.5 and a lower SF number (instead of the original SF11). For example, USA/Canada (Recommended) preset is 910.525MHz, SF7, BW62.5, CR5. @@ -272,7 +272,7 @@ You can get the latitude and longitude from Google Maps by right-clicking the lo Reboot the repeater after `set prv.key ` command for the new private key to take effect. -### 3.6. Q: The first byte of my repeater's public key collides with an exisitng repeater on the mesh. How do I get a new private key with a matching public key that has its first byte of my choosing? +### 3.6. Q: The first byte of my repeater's public key collides with an existing repeater on the mesh. How do I get a new private key with a matching public key that has its first byte of my choosing? **A:** You can generate a new private key and specific the first byte of its public key here: https://gessaman.com/mc-keygen/ @@ -281,7 +281,7 @@ Having multiple repeaters with the same first byte ID does not negatively affect Best practice is when you set up a new repeater, choose a public key that is not in use. If it is not possible to find a unique first byte for your repeater's public key, choose one that is unique within about 10 miles (16 km) to minimize collision with nearby repeaters. -### 3.7. Q: My repeater maybe suffering from deafness due to high power interference near my mesh's frequency, it is not hearing other in-range MeshCore radios. What can I do? +### 3.7. Q: My repeater may be suffering from deafness due to high power interference near my mesh's frequency, it is not hearing other in-range MeshCore radios. What can I do? **A:** This may be due to the SX1262 radio's auto gain control feature. You can use this command to periodically reset its AGC. @@ -380,7 +380,7 @@ GPS on T-Deck is always enabled. You can skip the "GPS clock sync" and the T-De ### 4.5. Q: What size of SD card does the T-Deck support? **A:** Users have had no issues using 16GB or 32GB SD cards. Format the SD card to **FAT32**. -### 4.6. Q: what is the public key for the default public channel? +### 4.6. Q: What is the public key for the default public channel? **A:** T-Deck uses the same key the smartphone apps use but in base64 `izOH6cXN6mrJ5e26oRXNcg==` @@ -499,7 +499,7 @@ In MeshCore, only repeaters and room server with `set repeat on` repeat. In the case if users are moving around frequently, and the paths are breaking, they just see the phone client retries and revert to flood to attempt to re-establish a path. -### 5.4. Q: How does a node discovery a path to its destination and then use it to send messages in the future, instead of flooding every message it sends like Meshtastic? +### 5.4. Q: How does a node discover a path to its destination and then use it to send messages in the future, instead of flooding every message it sends like Meshtastic? Routes are stored in sender's contact list. When you send a message the first time, the message first gets to your destination by flood routing. When your destination node gets the message, it will send back a delivery report to the sender with all repeaters that the original message went through. This delivery report is flood-routed back to you the sender and is a basis for future direct path. When you send the next message, the path will get embedded into the packet and be evaluated by repeaters. If the hop and address of the repeater matches, it will retransmit the message, otherwise it will not retransmit, hence minimizing utilization. @@ -512,7 +512,7 @@ Routes are stored in sender's contact list. When you send a message the first t [Source](https://discord.com/channels/1343693475589263471/1343693475589263474/1350023009527664672) -### 5.6. Q: what is the public key for the default public channel? +### 5.6. Q: What is the public key for the default public channel? **A:** The smartphone app key is in hex: ` 8b3387e9c5cdea6ac9e5edbaa115cd72` @@ -658,11 +658,11 @@ From here, reference repeater and room server command line commands on MeshCore - https://github.com/meshcore-dev/MeshCore/wiki/Repeater-&-Room-Server-CLI-Reference -### 5.14. Q: Are there are projects built around MeshCore? +### 5.14. Q: Are there projects built around MeshCore? -**A:** Yes, there are many. MeshCore's protocol is open source using the MIT license. The MIT license and the open source protocol makes it very easy for the MeshCore community to build new firmware for radios, applications on mobile devices, map tools, and analysis tools, and integration with other projects like Home Asistant. +**A:** Yes, there are many. MeshCore's protocol is open source using the MIT license. The MIT license and the open source protocol makes it very easy for the MeshCore community to build new firmware for radios, applications on mobile devices, map tools, and analysis tools, and integration with other projects like Home Assistant. -As new MeshCore community projects become available on a weekly basis, we have stopped tracking them here in this FAQ. [samuk](https://github.com/samuk) maintains a very exhausive list of MeshCore community project at https://github.com/samuk/awesome-meshcore/blob/main/README.md. samuk accepts PRs and merges them regularly. +As new MeshCore community projects become available on a weekly basis, we have stopped tracking them here in this FAQ. [samuk](https://github.com/samuk) maintains a very exhaustive list of MeshCore community project at https://github.com/samuk/awesome-meshcore/blob/main/README.md. samuk accepts PRs and merges them regularly. ### 5.15. Q: Are there client applications for Windows or Mac? @@ -716,7 +716,7 @@ You can get the epoch time on and use it to se - For RAK, click the reset button **TWICE** - For T1000-e, quickly disconnect and reconnect the magnetic side of the cable from the device **TWICE** - For Heltec T114, click the reset button **TWICE** (the bottom button) - - For Xiao nRF52, click the reset button once. If that doesn't work, quickly double click the reset button twice. If that doesn't work, disconnection the board from your PC and reconnect again ([seeed studio wiki](https://wiki.seeedstudio.com/XIAO_BLE/#access-the-swd-pins-for-debugging-and-reflashing-bootloader)) + - For Xiao nRF52, click the reset button once. If that doesn't work, quickly double click the reset button twice. If that doesn't work, disconnect the board from your PC and reconnect again ([seeed studio wiki](https://wiki.seeedstudio.com/XIAO_BLE/#access-the-swd-pins-for-debugging-and-reflashing-bootloader)) 5. A new folder will appear on your computer's desktop 6. Download the `flash_erase*.uf2` file for your device on https://flasher.meshcore.io - RAK WisBlock and Heltec T114: `Flash_erase-nRF32_softdevice_v6.uf2` @@ -826,7 +826,7 @@ Edit WIFI_SSID and WIFI_PWD in `./variants/heltec_v3/platformio.ini` and then fl ### 7.7. Q: I have a Station G2, or a Heltec V4, or an Ikoka Stick, or a radio with a EByte E22-900M30S or a E22-900M33S module, what should their transmit power be set to? **A:** -For companion radios, you can set these radios' transmit power in the smartphone app. For repeater and room server radios, you can set their transmit power using the command line command `set tx`. You can get their current value using command line comand `get tx` +For companion radios, you can set these radios' transmit power in the smartphone app. For repeater and room server radios, you can set their transmit power using the command line command `set tx`. You can get their current value using command line command `get tx` ⚠️ **WARNING: Set these values at your own risk. Incorrect power settings can permanently damage your radio hardware.** From 0a8a0a49041662c255f019ade12e78e98074beb4 Mon Sep 17 00:00:00 2001 From: Scott Powell Date: Fri, 1 May 2026 14:47:07 +1000 Subject: [PATCH 53/54] * Refactor: removed duplicated radio_rng_seed(), radio_set_params(), radio_set_tx_power() --- examples/companion_radio/MyMesh.cpp | 8 +++---- examples/companion_radio/main.cpp | 2 +- examples/kiss_modem/main.cpp | 6 ++--- examples/simple_repeater/MyMesh.cpp | 10 ++++----- examples/simple_repeater/main.cpp | 2 +- examples/simple_room_server/MyMesh.cpp | 10 ++++----- examples/simple_room_server/main.cpp | 2 +- examples/simple_secure_chat/main.cpp | 6 ++--- examples/simple_sensor/SensorMesh.cpp | 10 ++++----- examples/simple_sensor/main.cpp | 2 +- src/helpers/esp32/ESPNOWRadio.cpp | 4 ++++ src/helpers/esp32/ESPNOWRadio.h | 7 ++++++ src/helpers/radiolib/CustomLLCC68Wrapper.h | 9 ++++++++ src/helpers/radiolib/CustomLR1110Wrapper.h | 9 ++++++++ src/helpers/radiolib/CustomSTM32WLxWrapper.h | 9 ++++++++ src/helpers/radiolib/CustomSX1262Wrapper.h | 9 ++++++++ src/helpers/radiolib/CustomSX1268Wrapper.h | 9 ++++++++ src/helpers/radiolib/CustomSX1276Wrapper.h | 9 ++++++++ src/helpers/radiolib/RadioLibWrappers.cpp | 8 +++++++ src/helpers/radiolib/RadioLibWrappers.h | 4 ++++ variants/ebyte_eora_s3/target.cpp | 16 -------------- variants/ebyte_eora_s3/target.h | 3 --- variants/gat562_30s_mesh_kit/target.cpp | 15 ------------- variants/gat562_30s_mesh_kit/target.h | 3 --- variants/gat562_mesh_evb_pro/target.cpp | 15 ------------- variants/gat562_mesh_evb_pro/target.h | 3 --- variants/gat562_mesh_tracker_pro/target.cpp | 15 ------------- variants/gat562_mesh_tracker_pro/target.h | 3 --- variants/gat562_mesh_watch13/target.cpp | 15 ------------- variants/gat562_mesh_watch13/target.h | 3 --- variants/generic-e22/target.cpp | 16 -------------- variants/generic-e22/target.h | 3 --- variants/generic_espnow/target.cpp | 12 ---------- variants/generic_espnow/target.h | 3 --- variants/heltec_ct62/target.cpp | 16 -------------- variants/heltec_ct62/target.h | 3 --- variants/heltec_e213/target.cpp | 16 -------------- variants/heltec_e213/target.h | 3 --- variants/heltec_e290/target.cpp | 16 -------------- variants/heltec_e290/target.h | 3 --- variants/heltec_mesh_solar/target.cpp | 16 -------------- variants/heltec_mesh_solar/target.h | 3 --- variants/heltec_t096/target.cpp | 15 ------------- variants/heltec_t096/target.h | 3 --- variants/heltec_t114/target.cpp | 16 -------------- variants/heltec_t114/target.h | 3 --- variants/heltec_t190/target.cpp | 16 -------------- variants/heltec_t190/target.h | 3 --- variants/heltec_tracker/target.cpp | 16 -------------- variants/heltec_tracker/target.h | 3 --- variants/heltec_tracker_v2/target.cpp | 16 -------------- variants/heltec_tracker_v2/target.h | 3 --- variants/heltec_v2/target.cpp | 16 -------------- variants/heltec_v2/target.h | 3 --- variants/heltec_v3/target.cpp | 16 -------------- variants/heltec_v3/target.h | 3 --- variants/heltec_v4/target.cpp | 16 -------------- variants/heltec_v4/target.h | 3 --- variants/heltec_wireless_paper/target.cpp | 16 -------------- variants/heltec_wireless_paper/target.h | 3 --- variants/ikoka_handheld_nrf/target.cpp | 16 -------------- variants/ikoka_handheld_nrf/target.h | 3 --- variants/ikoka_nano_nrf/target.cpp | 16 -------------- variants/ikoka_nano_nrf/target.h | 3 --- variants/ikoka_stick_nrf/target.cpp | 16 -------------- variants/ikoka_stick_nrf/target.h | 3 --- variants/keepteen_lt1/target.cpp | 16 -------------- variants/keepteen_lt1/target.h | 3 --- variants/lilygo_t3s3/target.cpp | 16 -------------- variants/lilygo_t3s3/target.h | 3 --- variants/lilygo_t3s3_sx1276/target.cpp | 16 -------------- variants/lilygo_t3s3_sx1276/target.h | 3 --- variants/lilygo_tbeam_1w/target.cpp | 16 -------------- variants/lilygo_tbeam_1w/target.h | 3 --- variants/lilygo_tbeam_SX1262/target.cpp | 16 -------------- variants/lilygo_tbeam_SX1262/target.h | 3 --- variants/lilygo_tbeam_SX1276/target.cpp | 16 -------------- variants/lilygo_tbeam_SX1276/target.h | 3 --- .../lilygo_tbeam_supreme_SX1262/target.cpp | 16 -------------- variants/lilygo_tbeam_supreme_SX1262/target.h | 3 --- variants/lilygo_tdeck/target.cpp | 16 -------------- variants/lilygo_tdeck/target.h | 3 --- variants/lilygo_techo/target.cpp | 16 -------------- variants/lilygo_techo/target.h | 3 --- variants/lilygo_techo_lite/target.cpp | 16 -------------- variants/lilygo_techo_lite/target.h | 3 --- variants/lilygo_tlora_c6/target.cpp | 16 -------------- variants/lilygo_tlora_c6/target.h | 3 --- variants/lilygo_tlora_v2_1/target.cpp | 16 -------------- variants/lilygo_tlora_v2_1/target.h | 3 --- variants/m5stack_unit_c6l/UnitC6LBoard.cpp | 16 -------------- variants/m5stack_unit_c6l/target.h | 3 --- variants/mesh_pocket/target.cpp | 16 -------------- variants/mesh_pocket/target.h | 3 --- variants/meshadventurer/target.cpp | 16 -------------- variants/meshadventurer/target.h | 3 --- variants/meshtiny/target.cpp | 16 -------------- variants/meshtiny/target.h | 3 --- variants/minewsemi_me25ls01/target.cpp | 16 -------------- variants/minewsemi_me25ls01/target.h | 3 --- variants/muziworks_r1_neo/target.cpp | 15 ------------- variants/muziworks_r1_neo/target.h | 3 --- variants/nano_g2_ultra/target.cpp | 16 -------------- variants/nano_g2_ultra/target.h | 3 --- variants/nibble_screen_connect/target.cpp | 22 +++---------------- variants/nibble_screen_connect/target.h | 5 +---- variants/promicro/target.cpp | 16 -------------- variants/promicro/target.h | 3 --- variants/rak11310/target.cpp | 18 --------------- variants/rak11310/target.h | 3 --- variants/rak3112/target.cpp | 16 -------------- variants/rak3112/target.h | 3 --- variants/rak3401/target.cpp | 16 -------------- variants/rak3401/target.h | 3 --- variants/rak3x72/target.cpp | 16 -------------- variants/rak3x72/target.h | 3 --- variants/rak4631/target.cpp | 17 -------------- variants/rak4631/target.h | 3 --- variants/rak_wismesh_tag/target.cpp | 16 -------------- variants/rak_wismesh_tag/target.h | 3 --- variants/rpi_picow/target.cpp | 16 -------------- variants/rpi_picow/target.h | 3 --- variants/sensecap_indicator-espnow/target.cpp | 12 ---------- variants/sensecap_indicator-espnow/target.h | 3 --- variants/sensecap_solar/target.cpp | 16 -------------- variants/sensecap_solar/target.h | 3 --- variants/station_g2/target.cpp | 16 -------------- variants/station_g2/target.h | 3 --- variants/t1000-e/target.cpp | 16 -------------- variants/t1000-e/target.h | 3 --- variants/tenstar_c3/target.cpp | 16 -------------- variants/tenstar_c3/target.h | 3 --- variants/thinknode_m1/target.cpp | 16 -------------- variants/thinknode_m1/target.h | 3 --- variants/thinknode_m2/target.cpp | 17 -------------- variants/thinknode_m2/target.h | 3 --- variants/thinknode_m3/target.cpp | 16 -------------- variants/thinknode_m3/target.h | 3 --- variants/thinknode_m5/target.cpp | 17 -------------- variants/thinknode_m5/target.h | 3 --- variants/thinknode_m6/target.cpp | 16 -------------- variants/thinknode_m6/target.h | 3 --- variants/tiny_relay/target.cpp | 19 ---------------- variants/tiny_relay/target.h | 3 --- variants/waveshare_rp2040_lora/target.cpp | 16 -------------- variants/waveshare_rp2040_lora/target.h | 3 --- variants/wio-e5-dev/target.cpp | 16 -------------- variants/wio-e5-dev/target.h | 3 --- variants/wio-e5-mini/target.cpp | 16 -------------- variants/wio-e5-mini/target.h | 3 --- variants/wio-tracker-l1/target.cpp | 16 -------------- variants/wio-tracker-l1/target.h | 3 --- variants/wio_wm1110/target.cpp | 16 -------------- variants/wio_wm1110/target.h | 3 --- variants/xiao_c3/target.cpp | 16 -------------- variants/xiao_c3/target.h | 3 --- variants/xiao_c6/target.h | 3 --- variants/xiao_nrf52/target.cpp | 16 -------------- variants/xiao_nrf52/target.h | 3 --- variants/xiao_rp2040/target.cpp | 16 -------------- variants/xiao_rp2040/target.h | 3 --- variants/xiao_s3/target.cpp | 15 ------------- variants/xiao_s3/target.h | 3 --- variants/xiao_s3_wio/target.cpp | 16 -------------- variants/xiao_s3_wio/target.h | 3 --- 165 files changed, 110 insertions(+), 1397 deletions(-) diff --git a/examples/companion_radio/MyMesh.cpp b/examples/companion_radio/MyMesh.cpp index e8c1914b..71ba4abe 100644 --- a/examples/companion_radio/MyMesh.cpp +++ b/examples/companion_radio/MyMesh.cpp @@ -951,8 +951,8 @@ void MyMesh::begin(bool has_display) { addChannel("Public", PUBLIC_GROUP_PSK); // pre-configure Andy's public channel _store->loadChannels(this); - radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr); - radio_set_tx_power(_prefs.tx_power_dbm); + radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr); + radio_driver.setTxPower(_prefs.tx_power_dbm); radio_driver.setRxBoostedGainMode(_prefs.rx_boosted_gain); MESH_DEBUG_PRINTLN("RX Boosted Gain Mode: %s", radio_driver.getRxBoostedGainMode() ? "Enabled" : "Disabled"); @@ -1374,7 +1374,7 @@ void MyMesh::handleCmdFrame(size_t len) { _prefs.client_repeat = repeat; savePrefs(); - radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr); + radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr); MESH_DEBUG_PRINTLN("OK: CMD_SET_RADIO_PARAMS: f=%d, bw=%d, sf=%d, cr=%d", freq, bw, (uint32_t)sf, (uint32_t)cr); @@ -1391,7 +1391,7 @@ void MyMesh::handleCmdFrame(size_t len) { } else { _prefs.tx_power_dbm = power; savePrefs(); - radio_set_tx_power(_prefs.tx_power_dbm); + radio_driver.setTxPower(_prefs.tx_power_dbm); writeOKFrame(); } } else if (cmd_frame[0] == CMD_SET_TUNING_PARAMS) { diff --git a/examples/companion_radio/main.cpp b/examples/companion_radio/main.cpp index 876dc9c3..80e9da34 100644 --- a/examples/companion_radio/main.cpp +++ b/examples/companion_radio/main.cpp @@ -125,7 +125,7 @@ void setup() { if (!radio_init()) { halt(); } - fast_rng.begin(radio_get_rng_seed()); + fast_rng.begin(radio_driver.getRngSeed()); #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM) InternalFS.begin(); diff --git a/examples/kiss_modem/main.cpp b/examples/kiss_modem/main.cpp index bc7508a8..e497aa98 100644 --- a/examples/kiss_modem/main.cpp +++ b/examples/kiss_modem/main.cpp @@ -56,11 +56,11 @@ void loadOrCreateIdentity() { } void onSetRadio(float freq, float bw, uint8_t sf, uint8_t cr) { - radio_set_params(freq, bw, sf, cr); + radio_driver.setParams(freq, bw, sf, cr); } void onSetTxPower(uint8_t power) { - radio_set_tx_power(power); + radio_driver.setTxPower(power); } float onGetCurrentRssi() { @@ -82,7 +82,7 @@ void setup() { radio_driver.begin(); - rng.begin(radio_get_rng_seed()); + rng.begin(radio_driver.getRngSeed()); loadOrCreateIdentity(); sensors.begin(); diff --git a/examples/simple_repeater/MyMesh.cpp b/examples/simple_repeater/MyMesh.cpp index 666f79fc..53f642fd 100644 --- a/examples/simple_repeater/MyMesh.cpp +++ b/examples/simple_repeater/MyMesh.cpp @@ -953,8 +953,8 @@ void MyMesh::begin(FILESYSTEM *fs) { } #endif - radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr); - radio_set_tx_power(_prefs.tx_power_dbm); + radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr); + radio_driver.setTxPower(_prefs.tx_power_dbm); radio_driver.setRxBoostedGainMode(_prefs.rx_boosted_gain); MESH_DEBUG_PRINTLN("RX Boosted Gain Mode: %s", @@ -1050,7 +1050,7 @@ void MyMesh::dumpLogFile() { } void MyMesh::setTxPower(int8_t power_dbm) { - radio_set_tx_power(power_dbm); + radio_driver.setTxPower(power_dbm); } #if defined(USE_SX1262) || defined(USE_SX1268) @@ -1279,13 +1279,13 @@ void MyMesh::loop() { if (set_radio_at && millisHasNowPassed(set_radio_at)) { // apply pending (temporary) radio params set_radio_at = 0; // clear timer - radio_set_params(pending_freq, pending_bw, pending_sf, pending_cr); + radio_driver.setParams(pending_freq, pending_bw, pending_sf, pending_cr); MESH_DEBUG_PRINTLN("Temp radio params"); } if (revert_radio_at && millisHasNowPassed(revert_radio_at)) { // revert radio params to orig revert_radio_at = 0; // clear timer - radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr); + radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr); MESH_DEBUG_PRINTLN("Radio params restored"); } diff --git a/examples/simple_repeater/main.cpp b/examples/simple_repeater/main.cpp index e37078ce..7fad801b 100644 --- a/examples/simple_repeater/main.cpp +++ b/examples/simple_repeater/main.cpp @@ -57,7 +57,7 @@ void setup() { halt(); } - fast_rng.begin(radio_get_rng_seed()); + fast_rng.begin(radio_driver.getRngSeed()); FILESYSTEM* fs; #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM) diff --git a/examples/simple_room_server/MyMesh.cpp b/examples/simple_room_server/MyMesh.cpp index 145fb0fd..16042052 100644 --- a/examples/simple_room_server/MyMesh.cpp +++ b/examples/simple_room_server/MyMesh.cpp @@ -691,8 +691,8 @@ void MyMesh::begin(FILESYSTEM *fs) { } } - radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr); - radio_set_tx_power(_prefs.tx_power_dbm); + radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr); + radio_driver.setTxPower(_prefs.tx_power_dbm); updateAdvertTimer(); updateFloodAdvertTimer(); @@ -796,7 +796,7 @@ void MyMesh::dumpLogFile() { } void MyMesh::setTxPower(int8_t power_dbm) { - radio_set_tx_power(power_dbm); + radio_driver.setTxPower(power_dbm); } void MyMesh::saveIdentity(const mesh::LocalIdentity &new_id) { @@ -999,13 +999,13 @@ void MyMesh::loop() { if (set_radio_at && millisHasNowPassed(set_radio_at)) { // apply pending (temporary) radio params set_radio_at = 0; // clear timer - radio_set_params(pending_freq, pending_bw, pending_sf, pending_cr); + radio_driver.setParams(pending_freq, pending_bw, pending_sf, pending_cr); MESH_DEBUG_PRINTLN("Temp radio params"); } if (revert_radio_at && millisHasNowPassed(revert_radio_at)) { // revert radio params to orig revert_radio_at = 0; // clear timer - radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr); + radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr); MESH_DEBUG_PRINTLN("Radio params restored"); } diff --git a/examples/simple_room_server/main.cpp b/examples/simple_room_server/main.cpp index 825fb007..de38c253 100644 --- a/examples/simple_room_server/main.cpp +++ b/examples/simple_room_server/main.cpp @@ -35,7 +35,7 @@ void setup() { if (!radio_init()) { halt(); } - fast_rng.begin(radio_get_rng_seed()); + fast_rng.begin(radio_driver.getRngSeed()); FILESYSTEM* fs; #if defined(NRF52_PLATFORM) diff --git a/examples/simple_secure_chat/main.cpp b/examples/simple_secure_chat/main.cpp index ab14d393..d5066736 100644 --- a/examples/simple_secure_chat/main.cpp +++ b/examples/simple_secure_chat/main.cpp @@ -562,7 +562,7 @@ void setup() { if (!radio_init()) { halt(); } - fast_rng.begin(radio_get_rng_seed()); + fast_rng.begin(radio_driver.getRngSeed()); #if defined(NRF52_PLATFORM) InternalFS.begin(); @@ -577,8 +577,8 @@ void setup() { #error "need to define filesystem" #endif - radio_set_params(the_mesh.getFreqPref(), LORA_BW, LORA_SF, LORA_CR); - radio_set_tx_power(the_mesh.getTxPowerPref()); + radio_driver.setParams(the_mesh.getFreqPref(), LORA_BW, LORA_SF, LORA_CR); + radio_driver.setTxPower(the_mesh.getTxPowerPref()); the_mesh.showWelcome(); diff --git a/examples/simple_sensor/SensorMesh.cpp b/examples/simple_sensor/SensorMesh.cpp index b8fe1e57..879fcbf0 100644 --- a/examples/simple_sensor/SensorMesh.cpp +++ b/examples/simple_sensor/SensorMesh.cpp @@ -764,8 +764,8 @@ void SensorMesh::begin(FILESYSTEM* fs) { } } - radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr); - radio_set_tx_power(_prefs.tx_power_dbm); + radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr); + radio_driver.setTxPower(_prefs.tx_power_dbm); updateAdvertTimer(); updateFloodAdvertTimer(); @@ -842,7 +842,7 @@ void SensorMesh::updateFloodAdvertTimer() { } void SensorMesh::setTxPower(int8_t power_dbm) { - radio_set_tx_power(power_dbm); + radio_driver.setTxPower(power_dbm); } void SensorMesh::formatStatsReply(char *reply) { @@ -908,13 +908,13 @@ void SensorMesh::loop() { if (set_radio_at && millisHasNowPassed(set_radio_at)) { // apply pending (temporary) radio params set_radio_at = 0; // clear timer - radio_set_params(pending_freq, pending_bw, pending_sf, pending_cr); + radio_driver.setParams(pending_freq, pending_bw, pending_sf, pending_cr); MESH_DEBUG_PRINTLN("Temp radio params"); } if (revert_radio_at && millisHasNowPassed(revert_radio_at)) { // revert radio params to orig revert_radio_at = 0; // clear timer - radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr); + radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr); MESH_DEBUG_PRINTLN("Radio params restored"); } diff --git a/examples/simple_sensor/main.cpp b/examples/simple_sensor/main.cpp index 330adcc2..cace67a0 100644 --- a/examples/simple_sensor/main.cpp +++ b/examples/simple_sensor/main.cpp @@ -68,7 +68,7 @@ void setup() { if (!radio_init()) { halt(); } - fast_rng.begin(radio_get_rng_seed()); + fast_rng.begin(radio_driver.getRngSeed()); FILESYSTEM* fs; #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM) diff --git a/src/helpers/esp32/ESPNOWRadio.cpp b/src/helpers/esp32/ESPNOWRadio.cpp index ced19f91..a7557f14 100644 --- a/src/helpers/esp32/ESPNOWRadio.cpp +++ b/src/helpers/esp32/ESPNOWRadio.cpp @@ -54,6 +54,10 @@ void ESPNOWRadio::init() { } } +uint32_t ESPNOWRadio::getRngSeed() { + return millis() + intID(); // TODO: where to get some entropy? +} + void ESPNOWRadio::setTxPower(uint8_t dbm) { esp_wifi_set_max_tx_power(dbm * 4); } diff --git a/src/helpers/esp32/ESPNOWRadio.h b/src/helpers/esp32/ESPNOWRadio.h index 43772e5e..67b1448e 100644 --- a/src/helpers/esp32/ESPNOWRadio.h +++ b/src/helpers/esp32/ESPNOWRadio.h @@ -9,6 +9,13 @@ protected: public: ESPNOWRadio() { n_recv = n_sent = n_recv_errors = 0; } + uint32_t getRngSeed(); + + void setParams(float freq, float bw, uint8_t sf, uint8_t cr) { + // no-op + } + void powerOff() { /* no-op */ } + void init(); int recvRaw(uint8_t* bytes, int sz) override; uint32_t getEstAirtimeFor(int len_bytes) override; diff --git a/src/helpers/radiolib/CustomLLCC68Wrapper.h b/src/helpers/radiolib/CustomLLCC68Wrapper.h index 793ba335..8861f76d 100644 --- a/src/helpers/radiolib/CustomLLCC68Wrapper.h +++ b/src/helpers/radiolib/CustomLLCC68Wrapper.h @@ -7,6 +7,15 @@ class CustomLLCC68Wrapper : public RadioLibWrapper { public: CustomLLCC68Wrapper(CustomLLCC68& radio, mesh::MainBoard& board) : RadioLibWrapper(radio, board) { } + + void setParams(float freq, float bw, uint8_t sf, uint8_t cr) override { + ((CustomLLCC68 *)_radio)->setFrequency(freq); + ((CustomLLCC68 *)_radio)->setSpreadingFactor(sf); + ((CustomLLCC68 *)_radio)->setBandwidth(bw); + ((CustomLLCC68 *)_radio)->setCodingRate(cr); + updatePreamble(sf); + } + bool isReceivingPacket() override { return ((CustomLLCC68 *)_radio)->isReceiving(); } diff --git a/src/helpers/radiolib/CustomLR1110Wrapper.h b/src/helpers/radiolib/CustomLR1110Wrapper.h index 0445262b..13efd25b 100644 --- a/src/helpers/radiolib/CustomLR1110Wrapper.h +++ b/src/helpers/radiolib/CustomLR1110Wrapper.h @@ -7,6 +7,15 @@ class CustomLR1110Wrapper : public RadioLibWrapper { public: CustomLR1110Wrapper(CustomLR1110& radio, mesh::MainBoard& board) : RadioLibWrapper(radio, board) { } + + void setParams(float freq, float bw, uint8_t sf, uint8_t cr) override { + ((CustomLR1110 *)_radio)->setFrequency(freq); + ((CustomLR1110 *)_radio)->setSpreadingFactor(sf); + ((CustomLR1110 *)_radio)->setBandwidth(bw); + ((CustomLR1110 *)_radio)->setCodingRate(cr); + updatePreamble(sf); + } + void doResetAGC() override { lr11x0ResetAGC((LR11x0 *)_radio, ((CustomLR1110 *)_radio)->getFreqMHz()); } bool isReceivingPacket() override { return ((CustomLR1110 *)_radio)->isReceiving(); diff --git a/src/helpers/radiolib/CustomSTM32WLxWrapper.h b/src/helpers/radiolib/CustomSTM32WLxWrapper.h index cccdc043..97bf6820 100644 --- a/src/helpers/radiolib/CustomSTM32WLxWrapper.h +++ b/src/helpers/radiolib/CustomSTM32WLxWrapper.h @@ -8,6 +8,15 @@ class CustomSTM32WLxWrapper : public RadioLibWrapper { public: CustomSTM32WLxWrapper(CustomSTM32WLx& radio, mesh::MainBoard& board) : RadioLibWrapper(radio, board) { } + + void setParams(float freq, float bw, uint8_t sf, uint8_t cr) override { + ((CustomSTM32WLx *)_radio)->setFrequency(freq); + ((CustomSTM32WLx *)_radio)->setSpreadingFactor(sf); + ((CustomSTM32WLx *)_radio)->setBandwidth(bw); + ((CustomSTM32WLx *)_radio)->setCodingRate(cr); + updatePreamble(sf); + } + bool isReceivingPacket() override { return ((CustomSTM32WLx *)_radio)->isReceiving(); } diff --git a/src/helpers/radiolib/CustomSX1262Wrapper.h b/src/helpers/radiolib/CustomSX1262Wrapper.h index e13561a4..cc7bb223 100644 --- a/src/helpers/radiolib/CustomSX1262Wrapper.h +++ b/src/helpers/radiolib/CustomSX1262Wrapper.h @@ -11,6 +11,15 @@ class CustomSX1262Wrapper : public RadioLibWrapper { public: CustomSX1262Wrapper(CustomSX1262& radio, mesh::MainBoard& board) : RadioLibWrapper(radio, board) { } + + void setParams(float freq, float bw, uint8_t sf, uint8_t cr) override { + ((CustomSX1262 *)_radio)->setFrequency(freq); + ((CustomSX1262 *)_radio)->setSpreadingFactor(sf); + ((CustomSX1262 *)_radio)->setBandwidth(bw); + ((CustomSX1262 *)_radio)->setCodingRate(cr); + updatePreamble(sf); + } + bool isReceivingPacket() override { return ((CustomSX1262 *)_radio)->isReceiving(); } diff --git a/src/helpers/radiolib/CustomSX1268Wrapper.h b/src/helpers/radiolib/CustomSX1268Wrapper.h index f24ab41c..9ddea78f 100644 --- a/src/helpers/radiolib/CustomSX1268Wrapper.h +++ b/src/helpers/radiolib/CustomSX1268Wrapper.h @@ -11,6 +11,15 @@ class CustomSX1268Wrapper : public RadioLibWrapper { public: CustomSX1268Wrapper(CustomSX1268& radio, mesh::MainBoard& board) : RadioLibWrapper(radio, board) { } + + void setParams(float freq, float bw, uint8_t sf, uint8_t cr) override { + ((CustomSX1268 *)_radio)->setFrequency(freq); + ((CustomSX1268 *)_radio)->setSpreadingFactor(sf); + ((CustomSX1268 *)_radio)->setBandwidth(bw); + ((CustomSX1268 *)_radio)->setCodingRate(cr); + updatePreamble(sf); + } + bool isReceivingPacket() override { return ((CustomSX1268 *)_radio)->isReceiving(); } diff --git a/src/helpers/radiolib/CustomSX1276Wrapper.h b/src/helpers/radiolib/CustomSX1276Wrapper.h index afe2cc04..9d75ce12 100644 --- a/src/helpers/radiolib/CustomSX1276Wrapper.h +++ b/src/helpers/radiolib/CustomSX1276Wrapper.h @@ -10,6 +10,15 @@ class CustomSX1276Wrapper : public RadioLibWrapper { public: CustomSX1276Wrapper(CustomSX1276& radio, mesh::MainBoard& board) : RadioLibWrapper(radio, board) { } + + void setParams(float freq, float bw, uint8_t sf, uint8_t cr) override { + ((CustomSX1276 *)_radio)->setFrequency(freq); + ((CustomSX1276 *)_radio)->setSpreadingFactor(sf); + ((CustomSX1276 *)_radio)->setBandwidth(bw); + ((CustomSX1276 *)_radio)->setCodingRate(cr); + updatePreamble(sf); + } + bool isReceivingPacket() override { return ((CustomSX1276 *)_radio)->isReceiving(); } diff --git a/src/helpers/radiolib/RadioLibWrappers.cpp b/src/helpers/radiolib/RadioLibWrappers.cpp index 85f3a935..b6519aef 100644 --- a/src/helpers/radiolib/RadioLibWrappers.cpp +++ b/src/helpers/radiolib/RadioLibWrappers.cpp @@ -42,6 +42,14 @@ void RadioLibWrapper::begin() { _floor_sample_sum = 0; } +uint32_t RadioLibWrapper::getRngSeed() { + return _radio->random(0x7FFFFFFF); +} + +void RadioLibWrapper::setTxPower(int8_t dbm) { + _radio->setOutputPower(dbm); +} + void RadioLibWrapper::idle() { _radio->standby(); state = STATE_IDLE; // need another startReceive() diff --git a/src/helpers/radiolib/RadioLibWrappers.h b/src/helpers/radiolib/RadioLibWrappers.h index ff951aaa..efd3e179 100644 --- a/src/helpers/radiolib/RadioLibWrappers.h +++ b/src/helpers/radiolib/RadioLibWrappers.h @@ -38,6 +38,10 @@ public: return isChannelActive(); } + virtual void setParams(float freq, float bw, uint8_t sf, uint8_t cr) = 0; + uint32_t getRngSeed(); + void setTxPower(int8_t dbm); + virtual float getCurrentRSSI() =0; virtual uint8_t getSpreadingFactor() const { return LORA_SF; } static uint16_t preambleLengthForSF(uint8_t sf) { return sf <= 8 ? 32 : 16; } diff --git a/variants/ebyte_eora_s3/target.cpp b/variants/ebyte_eora_s3/target.cpp index 9e656cc2..91d851ff 100644 --- a/variants/ebyte_eora_s3/target.cpp +++ b/variants/ebyte_eora_s3/target.cpp @@ -64,22 +64,6 @@ bool radio_init() { return true; // success } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/ebyte_eora_s3/target.h b/variants/ebyte_eora_s3/target.h index 892c3de3..b64694f5 100644 --- a/variants/ebyte_eora_s3/target.h +++ b/variants/ebyte_eora_s3/target.h @@ -23,7 +23,4 @@ extern SensorManager sensors; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/gat562_30s_mesh_kit/target.cpp b/variants/gat562_30s_mesh_kit/target.cpp index 66723b44..8f84a7a1 100644 --- a/variants/gat562_30s_mesh_kit/target.cpp +++ b/variants/gat562_30s_mesh_kit/target.cpp @@ -38,21 +38,6 @@ bool radio_init() { return radio.std_init(&SPI); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/gat562_30s_mesh_kit/target.h b/variants/gat562_30s_mesh_kit/target.h index c112fd6c..d526a5d0 100644 --- a/variants/gat562_30s_mesh_kit/target.h +++ b/variants/gat562_30s_mesh_kit/target.h @@ -24,7 +24,4 @@ extern AutoDiscoverRTCClock rtc_clock; extern EnvironmentSensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/gat562_mesh_evb_pro/target.cpp b/variants/gat562_mesh_evb_pro/target.cpp index 368b5fa1..8dc203de 100644 --- a/variants/gat562_mesh_evb_pro/target.cpp +++ b/variants/gat562_mesh_evb_pro/target.cpp @@ -37,21 +37,6 @@ bool radio_init() { return radio.std_init(&SPI); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/gat562_mesh_evb_pro/target.h b/variants/gat562_mesh_evb_pro/target.h index 2a3c6f87..9111704f 100644 --- a/variants/gat562_mesh_evb_pro/target.h +++ b/variants/gat562_mesh_evb_pro/target.h @@ -23,7 +23,4 @@ extern AutoDiscoverRTCClock rtc_clock; extern EnvironmentSensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/gat562_mesh_tracker_pro/target.cpp b/variants/gat562_mesh_tracker_pro/target.cpp index 8ef0ecd3..d16b4538 100644 --- a/variants/gat562_mesh_tracker_pro/target.cpp +++ b/variants/gat562_mesh_tracker_pro/target.cpp @@ -38,21 +38,6 @@ bool radio_init() { return radio.std_init(&SPI); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/gat562_mesh_tracker_pro/target.h b/variants/gat562_mesh_tracker_pro/target.h index d43c5f25..0d3b7d76 100644 --- a/variants/gat562_mesh_tracker_pro/target.h +++ b/variants/gat562_mesh_tracker_pro/target.h @@ -24,7 +24,4 @@ extern AutoDiscoverRTCClock rtc_clock; extern EnvironmentSensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/gat562_mesh_watch13/target.cpp b/variants/gat562_mesh_watch13/target.cpp index 87f65dd9..95bcf6dc 100644 --- a/variants/gat562_mesh_watch13/target.cpp +++ b/variants/gat562_mesh_watch13/target.cpp @@ -29,21 +29,6 @@ bool radio_init() { return radio.std_init(&SPI); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/gat562_mesh_watch13/target.h b/variants/gat562_mesh_watch13/target.h index a9a71ce4..9ed5cda7 100644 --- a/variants/gat562_mesh_watch13/target.h +++ b/variants/gat562_mesh_watch13/target.h @@ -25,7 +25,4 @@ extern AutoDiscoverRTCClock rtc_clock; extern EnvironmentSensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/generic-e22/target.cpp b/variants/generic-e22/target.cpp index ea9664fd..26bba1c0 100644 --- a/variants/generic-e22/target.cpp +++ b/variants/generic-e22/target.cpp @@ -27,22 +27,6 @@ bool radio_init() { #endif } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/generic-e22/target.h b/variants/generic-e22/target.h index 6504078c..16612f67 100644 --- a/variants/generic-e22/target.h +++ b/variants/generic-e22/target.h @@ -15,8 +15,5 @@ extern AutoDiscoverRTCClock rtc_clock; extern SensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/generic_espnow/target.cpp b/variants/generic_espnow/target.cpp index f42085c0..f447523e 100644 --- a/variants/generic_espnow/target.cpp +++ b/variants/generic_espnow/target.cpp @@ -17,18 +17,6 @@ bool radio_init() { return true; // success } -uint32_t radio_get_rng_seed() { - return millis() + radio_driver.intID(); // TODO: where to get some entropy? -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - // no-op -} - -void radio_set_tx_power(int8_t dbm) { - radio_driver.setTxPower(dbm); -} - // NOTE: as we are using the WiFi radio, the ESP_IDF will have enabled hardware RNG: // https://docs.espressif.com/projects/esp-idf/en/stable/esp32/api-reference/system/random.html class ESP_RNG : public mesh::RNG { diff --git a/variants/generic_espnow/target.h b/variants/generic_espnow/target.h index 1ebd0837..884f4969 100644 --- a/variants/generic_espnow/target.h +++ b/variants/generic_espnow/target.h @@ -10,7 +10,4 @@ extern ESP32RTCClock rtc_clock; extern SensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/heltec_ct62/target.cpp b/variants/heltec_ct62/target.cpp index cd8bd507..522c3199 100644 --- a/variants/heltec_ct62/target.cpp +++ b/variants/heltec_ct62/target.cpp @@ -16,22 +16,6 @@ bool radio_init() { return radio.std_init(&SPI); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/heltec_ct62/target.h b/variants/heltec_ct62/target.h index 1bd525e1..214a6e0f 100644 --- a/variants/heltec_ct62/target.h +++ b/variants/heltec_ct62/target.h @@ -14,7 +14,4 @@ extern AutoDiscoverRTCClock rtc_clock; extern SensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/heltec_e213/target.cpp b/variants/heltec_e213/target.cpp index 859cd9fa..6914769d 100644 --- a/variants/heltec_e213/target.cpp +++ b/variants/heltec_e213/target.cpp @@ -33,22 +33,6 @@ bool radio_init() { #endif } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/heltec_e213/target.h b/variants/heltec_e213/target.h index c23ac1fa..6f2c291b 100644 --- a/variants/heltec_e213/target.h +++ b/variants/heltec_e213/target.h @@ -23,7 +23,4 @@ extern MomentaryButton user_btn; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/heltec_e290/target.cpp b/variants/heltec_e290/target.cpp index 8196ff7d..f2327954 100644 --- a/variants/heltec_e290/target.cpp +++ b/variants/heltec_e290/target.cpp @@ -33,22 +33,6 @@ bool radio_init() { #endif } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/heltec_e290/target.h b/variants/heltec_e290/target.h index b0900302..d78521fc 100644 --- a/variants/heltec_e290/target.h +++ b/variants/heltec_e290/target.h @@ -23,7 +23,4 @@ extern MomentaryButton user_btn; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/heltec_mesh_solar/target.cpp b/variants/heltec_mesh_solar/target.cpp index 08d29e15..d140864c 100644 --- a/variants/heltec_mesh_solar/target.cpp +++ b/variants/heltec_mesh_solar/target.cpp @@ -23,22 +23,6 @@ bool radio_init() { return radio.std_init(&SPI); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/heltec_mesh_solar/target.h b/variants/heltec_mesh_solar/target.h index f1921abf..1956f50e 100644 --- a/variants/heltec_mesh_solar/target.h +++ b/variants/heltec_mesh_solar/target.h @@ -40,7 +40,4 @@ extern SolarSensorManager sensors; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/heltec_t096/target.cpp b/variants/heltec_t096/target.cpp index 09609b87..30509977 100644 --- a/variants/heltec_t096/target.cpp +++ b/variants/heltec_t096/target.cpp @@ -43,21 +43,6 @@ bool radio_init() { #endif } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/heltec_t096/target.h b/variants/heltec_t096/target.h index 8c704b23..137d8db5 100644 --- a/variants/heltec_t096/target.h +++ b/variants/heltec_t096/target.h @@ -27,7 +27,4 @@ extern MomentaryButton user_btn; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/heltec_t114/target.cpp b/variants/heltec_t114/target.cpp index 36587177..cb8f75db 100644 --- a/variants/heltec_t114/target.cpp +++ b/variants/heltec_t114/target.cpp @@ -43,22 +43,6 @@ bool radio_init() { #endif } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/heltec_t114/target.h b/variants/heltec_t114/target.h index 612161fe..5aac84db 100644 --- a/variants/heltec_t114/target.h +++ b/variants/heltec_t114/target.h @@ -29,7 +29,4 @@ extern MomentaryButton user_btn; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/heltec_t190/target.cpp b/variants/heltec_t190/target.cpp index c39ca35c..6a2eab7d 100644 --- a/variants/heltec_t190/target.cpp +++ b/variants/heltec_t190/target.cpp @@ -33,22 +33,6 @@ bool radio_init() { #endif } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/heltec_t190/target.h b/variants/heltec_t190/target.h index 9a6e4d96..cde63220 100644 --- a/variants/heltec_t190/target.h +++ b/variants/heltec_t190/target.h @@ -23,7 +23,4 @@ extern MomentaryButton user_btn; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/heltec_tracker/target.cpp b/variants/heltec_tracker/target.cpp index 95cd9c9b..f32c41ff 100644 --- a/variants/heltec_tracker/target.cpp +++ b/variants/heltec_tracker/target.cpp @@ -37,22 +37,6 @@ bool radio_init() { } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/heltec_tracker/target.h b/variants/heltec_tracker/target.h index 29099f46..2931eda8 100644 --- a/variants/heltec_tracker/target.h +++ b/variants/heltec_tracker/target.h @@ -42,7 +42,4 @@ extern HWTSensorManager sensors; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/heltec_tracker_v2/target.cpp b/variants/heltec_tracker_v2/target.cpp index 6de866fb..c48a29f6 100644 --- a/variants/heltec_tracker_v2/target.cpp +++ b/variants/heltec_tracker_v2/target.cpp @@ -39,22 +39,6 @@ bool radio_init() { #endif } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/heltec_tracker_v2/target.h b/variants/heltec_tracker_v2/target.h index 62f31c95..240d9d4c 100644 --- a/variants/heltec_tracker_v2/target.h +++ b/variants/heltec_tracker_v2/target.h @@ -24,8 +24,5 @@ extern EnvironmentSensorManager sensors; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/heltec_v2/target.cpp b/variants/heltec_v2/target.cpp index d327d78b..2bc57b8c 100644 --- a/variants/heltec_v2/target.cpp +++ b/variants/heltec_v2/target.cpp @@ -32,22 +32,6 @@ bool radio_init() { #endif } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/heltec_v2/target.h b/variants/heltec_v2/target.h index 788dac72..cdffc18a 100644 --- a/variants/heltec_v2/target.h +++ b/variants/heltec_v2/target.h @@ -23,7 +23,4 @@ extern SensorManager sensors; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/heltec_v3/target.cpp b/variants/heltec_v3/target.cpp index 56356833..e6af466a 100644 --- a/variants/heltec_v3/target.cpp +++ b/variants/heltec_v3/target.cpp @@ -39,22 +39,6 @@ bool radio_init() { #endif } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/heltec_v3/target.h b/variants/heltec_v3/target.h index 21a209f9..2944b384 100644 --- a/variants/heltec_v3/target.h +++ b/variants/heltec_v3/target.h @@ -24,7 +24,4 @@ extern EnvironmentSensorManager sensors; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/heltec_v4/target.cpp b/variants/heltec_v4/target.cpp index e0b6a1d4..8483f276 100644 --- a/variants/heltec_v4/target.cpp +++ b/variants/heltec_v4/target.cpp @@ -39,22 +39,6 @@ bool radio_init() { #endif } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/heltec_v4/target.h b/variants/heltec_v4/target.h index 47d493cb..5d668186 100644 --- a/variants/heltec_v4/target.h +++ b/variants/heltec_v4/target.h @@ -28,8 +28,5 @@ extern EnvironmentSensorManager sensors; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/heltec_wireless_paper/target.cpp b/variants/heltec_wireless_paper/target.cpp index 52ef9fb5..be21695e 100644 --- a/variants/heltec_wireless_paper/target.cpp +++ b/variants/heltec_wireless_paper/target.cpp @@ -32,22 +32,6 @@ bool radio_init() { #endif } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/heltec_wireless_paper/target.h b/variants/heltec_wireless_paper/target.h index 47908314..72066781 100644 --- a/variants/heltec_wireless_paper/target.h +++ b/variants/heltec_wireless_paper/target.h @@ -29,7 +29,4 @@ extern MomentaryButton user_btn; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/ikoka_handheld_nrf/target.cpp b/variants/ikoka_handheld_nrf/target.cpp index e23fd8d8..6c53c5e3 100644 --- a/variants/ikoka_handheld_nrf/target.cpp +++ b/variants/ikoka_handheld_nrf/target.cpp @@ -25,22 +25,6 @@ bool radio_init() { return radio.std_init(&SPI); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/ikoka_handheld_nrf/target.h b/variants/ikoka_handheld_nrf/target.h index 9afe937a..18f7c9c5 100644 --- a/variants/ikoka_handheld_nrf/target.h +++ b/variants/ikoka_handheld_nrf/target.h @@ -23,8 +23,5 @@ extern AutoDiscoverRTCClock rtc_clock; extern EnvironmentSensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/ikoka_nano_nrf/target.cpp b/variants/ikoka_nano_nrf/target.cpp index 00294d5a..baf02c3d 100644 --- a/variants/ikoka_nano_nrf/target.cpp +++ b/variants/ikoka_nano_nrf/target.cpp @@ -23,22 +23,6 @@ bool radio_init() { return radio.std_init(&SPI); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/ikoka_nano_nrf/target.h b/variants/ikoka_nano_nrf/target.h index b85b8d93..30ee5cb6 100644 --- a/variants/ikoka_nano_nrf/target.h +++ b/variants/ikoka_nano_nrf/target.h @@ -22,8 +22,5 @@ extern AutoDiscoverRTCClock rtc_clock; extern EnvironmentSensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/ikoka_stick_nrf/target.cpp b/variants/ikoka_stick_nrf/target.cpp index d07dc345..bb140505 100644 --- a/variants/ikoka_stick_nrf/target.cpp +++ b/variants/ikoka_stick_nrf/target.cpp @@ -23,22 +23,6 @@ bool radio_init() { return radio.std_init(&SPI); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/ikoka_stick_nrf/target.h b/variants/ikoka_stick_nrf/target.h index b36c8393..46b05e8b 100644 --- a/variants/ikoka_stick_nrf/target.h +++ b/variants/ikoka_stick_nrf/target.h @@ -22,8 +22,5 @@ extern AutoDiscoverRTCClock rtc_clock; extern EnvironmentSensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/keepteen_lt1/target.cpp b/variants/keepteen_lt1/target.cpp index 71652b37..f1879ac5 100644 --- a/variants/keepteen_lt1/target.cpp +++ b/variants/keepteen_lt1/target.cpp @@ -29,22 +29,6 @@ bool radio_init() { return radio.std_init(&SPI); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/keepteen_lt1/target.h b/variants/keepteen_lt1/target.h index a37ac8ff..5b73bb66 100644 --- a/variants/keepteen_lt1/target.h +++ b/variants/keepteen_lt1/target.h @@ -24,8 +24,5 @@ extern EnvironmentSensorManager sensors; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/lilygo_t3s3/target.cpp b/variants/lilygo_t3s3/target.cpp index 73c19e06..34df31c3 100644 --- a/variants/lilygo_t3s3/target.cpp +++ b/variants/lilygo_t3s3/target.cpp @@ -27,22 +27,6 @@ bool radio_init() { return radio.std_init(&spi); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/lilygo_t3s3/target.h b/variants/lilygo_t3s3/target.h index 7db1b664..965cdd1a 100644 --- a/variants/lilygo_t3s3/target.h +++ b/variants/lilygo_t3s3/target.h @@ -23,8 +23,5 @@ extern SensorManager sensors; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/lilygo_t3s3_sx1276/target.cpp b/variants/lilygo_t3s3_sx1276/target.cpp index a62724fb..020ef54a 100644 --- a/variants/lilygo_t3s3_sx1276/target.cpp +++ b/variants/lilygo_t3s3_sx1276/target.cpp @@ -33,22 +33,6 @@ bool radio_init() { #endif } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/lilygo_t3s3_sx1276/target.h b/variants/lilygo_t3s3_sx1276/target.h index 2df4b3ed..460b7ac1 100644 --- a/variants/lilygo_t3s3_sx1276/target.h +++ b/variants/lilygo_t3s3_sx1276/target.h @@ -23,7 +23,4 @@ extern SensorManager sensors; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); \ No newline at end of file diff --git a/variants/lilygo_tbeam_1w/target.cpp b/variants/lilygo_tbeam_1w/target.cpp index b6a10257..6755df09 100644 --- a/variants/lilygo_tbeam_1w/target.cpp +++ b/variants/lilygo_tbeam_1w/target.cpp @@ -43,22 +43,6 @@ bool radio_init() { return success; } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); diff --git a/variants/lilygo_tbeam_1w/target.h b/variants/lilygo_tbeam_1w/target.h index a521332f..d6cd61b4 100644 --- a/variants/lilygo_tbeam_1w/target.h +++ b/variants/lilygo_tbeam_1w/target.h @@ -21,8 +21,5 @@ extern AutoDiscoverRTCClock rtc_clock; extern EnvironmentSensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/lilygo_tbeam_SX1262/target.cpp b/variants/lilygo_tbeam_SX1262/target.cpp index 943dcd65..6e5292a7 100644 --- a/variants/lilygo_tbeam_SX1262/target.cpp +++ b/variants/lilygo_tbeam_SX1262/target.cpp @@ -34,22 +34,6 @@ bool radio_init() { return radio.std_init(&spi); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/lilygo_tbeam_SX1262/target.h b/variants/lilygo_tbeam_SX1262/target.h index 691c01d4..c532a73a 100644 --- a/variants/lilygo_tbeam_SX1262/target.h +++ b/variants/lilygo_tbeam_SX1262/target.h @@ -23,8 +23,5 @@ extern EnvironmentSensorManager sensors; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/lilygo_tbeam_SX1276/target.cpp b/variants/lilygo_tbeam_SX1276/target.cpp index b6733a4f..94cc3d6d 100644 --- a/variants/lilygo_tbeam_SX1276/target.cpp +++ b/variants/lilygo_tbeam_SX1276/target.cpp @@ -39,22 +39,6 @@ bool radio_init() { #endif } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/lilygo_tbeam_SX1276/target.h b/variants/lilygo_tbeam_SX1276/target.h index ad385645..1c709905 100644 --- a/variants/lilygo_tbeam_SX1276/target.h +++ b/variants/lilygo_tbeam_SX1276/target.h @@ -23,7 +23,4 @@ extern EnvironmentSensorManager sensors; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); \ No newline at end of file diff --git a/variants/lilygo_tbeam_supreme_SX1262/target.cpp b/variants/lilygo_tbeam_supreme_SX1262/target.cpp index bebd4ed0..a0b765bf 100644 --- a/variants/lilygo_tbeam_supreme_SX1262/target.cpp +++ b/variants/lilygo_tbeam_supreme_SX1262/target.cpp @@ -31,22 +31,6 @@ bool radio_init() { return radio.std_init(&spi); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/lilygo_tbeam_supreme_SX1262/target.h b/variants/lilygo_tbeam_supreme_SX1262/target.h index 901c0715..25caa711 100644 --- a/variants/lilygo_tbeam_supreme_SX1262/target.h +++ b/variants/lilygo_tbeam_supreme_SX1262/target.h @@ -21,7 +21,4 @@ extern AutoDiscoverRTCClock rtc_clock; extern EnvironmentSensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/lilygo_tdeck/target.cpp b/variants/lilygo_tdeck/target.cpp index c78d2973..d20c56a3 100644 --- a/variants/lilygo_tdeck/target.cpp +++ b/variants/lilygo_tdeck/target.cpp @@ -34,22 +34,6 @@ bool radio_init() { #endif } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/lilygo_tdeck/target.h b/variants/lilygo_tdeck/target.h index 75247734..9d35af9b 100644 --- a/variants/lilygo_tdeck/target.h +++ b/variants/lilygo_tdeck/target.h @@ -25,7 +25,4 @@ extern EnvironmentSensorManager sensors; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/lilygo_techo/target.cpp b/variants/lilygo_techo/target.cpp index 1807621d..278fc76d 100644 --- a/variants/lilygo_techo/target.cpp +++ b/variants/lilygo_techo/target.cpp @@ -31,22 +31,6 @@ bool radio_init() { return radio.std_init(&SPI); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/lilygo_techo/target.h b/variants/lilygo_techo/target.h index 12b67c1c..2b8a1783 100644 --- a/variants/lilygo_techo/target.h +++ b/variants/lilygo_techo/target.h @@ -25,8 +25,5 @@ extern EnvironmentSensorManager sensors; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/lilygo_techo_lite/target.cpp b/variants/lilygo_techo_lite/target.cpp index 7a602c6f..95a62fcd 100644 --- a/variants/lilygo_techo_lite/target.cpp +++ b/variants/lilygo_techo_lite/target.cpp @@ -30,22 +30,6 @@ bool radio_init() { return radio.std_init(&SPI); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/lilygo_techo_lite/target.h b/variants/lilygo_techo_lite/target.h index 12b67c1c..2b8a1783 100644 --- a/variants/lilygo_techo_lite/target.h +++ b/variants/lilygo_techo_lite/target.h @@ -25,8 +25,5 @@ extern EnvironmentSensorManager sensors; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/lilygo_tlora_c6/target.cpp b/variants/lilygo_tlora_c6/target.cpp index 1f6cf9c3..d70e9b79 100644 --- a/variants/lilygo_tlora_c6/target.cpp +++ b/variants/lilygo_tlora_c6/target.cpp @@ -27,22 +27,6 @@ bool radio_init() { #endif } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/lilygo_tlora_c6/target.h b/variants/lilygo_tlora_c6/target.h index 0946b58b..81e99ee3 100644 --- a/variants/lilygo_tlora_c6/target.h +++ b/variants/lilygo_tlora_c6/target.h @@ -14,8 +14,5 @@ extern AutoDiscoverRTCClock rtc_clock; extern SensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/lilygo_tlora_v2_1/target.cpp b/variants/lilygo_tlora_v2_1/target.cpp index 81b1d74c..8c120161 100644 --- a/variants/lilygo_tlora_v2_1/target.cpp +++ b/variants/lilygo_tlora_v2_1/target.cpp @@ -28,22 +28,6 @@ bool radio_init() { #endif } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/lilygo_tlora_v2_1/target.h b/variants/lilygo_tlora_v2_1/target.h index 75823113..fa954b32 100644 --- a/variants/lilygo_tlora_v2_1/target.h +++ b/variants/lilygo_tlora_v2_1/target.h @@ -23,7 +23,4 @@ extern EnvironmentSensorManager sensors; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); \ No newline at end of file diff --git a/variants/m5stack_unit_c6l/UnitC6LBoard.cpp b/variants/m5stack_unit_c6l/UnitC6LBoard.cpp index 5a70e979..ab192ebe 100644 --- a/variants/m5stack_unit_c6l/UnitC6LBoard.cpp +++ b/variants/m5stack_unit_c6l/UnitC6LBoard.cpp @@ -28,22 +28,6 @@ bool radio_init() { #endif } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(uint8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/m5stack_unit_c6l/target.h b/variants/m5stack_unit_c6l/target.h index 665850dd..0a959b97 100644 --- a/variants/m5stack_unit_c6l/target.h +++ b/variants/m5stack_unit_c6l/target.h @@ -15,7 +15,4 @@ extern AutoDiscoverRTCClock rtc_clock; extern SensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(uint8_t dbm); mesh::LocalIdentity radio_new_identity(); \ No newline at end of file diff --git a/variants/mesh_pocket/target.cpp b/variants/mesh_pocket/target.cpp index 22f14e79..ee8f944d 100644 --- a/variants/mesh_pocket/target.cpp +++ b/variants/mesh_pocket/target.cpp @@ -23,22 +23,6 @@ bool radio_init() { return radio.std_init(&SPI); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/mesh_pocket/target.h b/variants/mesh_pocket/target.h index 233721fe..244fe7d2 100644 --- a/variants/mesh_pocket/target.h +++ b/variants/mesh_pocket/target.h @@ -24,9 +24,6 @@ extern AutoDiscoverRTCClock rtc_clock; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); extern SensorManager sensors; diff --git a/variants/meshadventurer/target.cpp b/variants/meshadventurer/target.cpp index d8ccbe2f..8795a4cb 100644 --- a/variants/meshadventurer/target.cpp +++ b/variants/meshadventurer/target.cpp @@ -30,22 +30,6 @@ bool radio_init() { #endif } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/meshadventurer/target.h b/variants/meshadventurer/target.h index f91d2fa7..d59b3aee 100644 --- a/variants/meshadventurer/target.h +++ b/variants/meshadventurer/target.h @@ -43,8 +43,5 @@ extern MASensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/meshtiny/target.cpp b/variants/meshtiny/target.cpp index c0f1b1fa..50d67826 100644 --- a/variants/meshtiny/target.cpp +++ b/variants/meshtiny/target.cpp @@ -26,22 +26,6 @@ bool radio_init() { return radio.std_init(&SPI); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/meshtiny/target.h b/variants/meshtiny/target.h index 6dadd566..3987e18c 100644 --- a/variants/meshtiny/target.h +++ b/variants/meshtiny/target.h @@ -27,8 +27,5 @@ extern MomentaryButton back_btn; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/minewsemi_me25ls01/target.cpp b/variants/minewsemi_me25ls01/target.cpp index c67663d6..9944a38b 100644 --- a/variants/minewsemi_me25ls01/target.cpp +++ b/variants/minewsemi_me25ls01/target.cpp @@ -77,22 +77,6 @@ bool radio_init() { return true; // success } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/minewsemi_me25ls01/target.h b/variants/minewsemi_me25ls01/target.h index ea7383e2..f8d42863 100644 --- a/variants/minewsemi_me25ls01/target.h +++ b/variants/minewsemi_me25ls01/target.h @@ -23,7 +23,4 @@ extern VolatileRTCClock rtc_clock; extern EnvironmentSensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/muziworks_r1_neo/target.cpp b/variants/muziworks_r1_neo/target.cpp index de889d43..68655c5d 100644 --- a/variants/muziworks_r1_neo/target.cpp +++ b/variants/muziworks_r1_neo/target.cpp @@ -26,21 +26,6 @@ bool radio_init() { return radio.std_init(&SPI); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/muziworks_r1_neo/target.h b/variants/muziworks_r1_neo/target.h index 53d7e03b..5bf3f268 100644 --- a/variants/muziworks_r1_neo/target.h +++ b/variants/muziworks_r1_neo/target.h @@ -16,7 +16,4 @@ extern DISPLAY_CLASS display; extern MomentaryButton user_btn; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/nano_g2_ultra/target.cpp b/variants/nano_g2_ultra/target.cpp index c5e7ebdf..69a2772c 100644 --- a/variants/nano_g2_ultra/target.cpp +++ b/variants/nano_g2_ultra/target.cpp @@ -25,22 +25,6 @@ bool radio_init() { return radio.std_init(&SPI); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - void NanoG2UltraSensorManager::start_gps() { MESH_DEBUG_PRINTLN("Starting GPS"); if (!gps_active) { diff --git a/variants/nano_g2_ultra/target.h b/variants/nano_g2_ultra/target.h index dcd63791..5c6ebee1 100644 --- a/variants/nano_g2_ultra/target.h +++ b/variants/nano_g2_ultra/target.h @@ -43,8 +43,5 @@ extern MomentaryButton user_btn; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/nibble_screen_connect/target.cpp b/variants/nibble_screen_connect/target.cpp index 248a788b..ceb9fe49 100644 --- a/variants/nibble_screen_connect/target.cpp +++ b/variants/nibble_screen_connect/target.cpp @@ -27,24 +27,8 @@ bool radio_init() { return radio.std_init(&spi); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); +mesh::LocalIdentity radio_new_identity() { + RadioNoiseListener rng(radio); + return mesh::LocalIdentity(&rng); } -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - -mesh::LocalIdentity radio_new_identity() { - RadioNoiseListener rng(radio); - return mesh::LocalIdentity(&rng); -} - diff --git a/variants/nibble_screen_connect/target.h b/variants/nibble_screen_connect/target.h index 020cd434..dcbcf8e1 100644 --- a/variants/nibble_screen_connect/target.h +++ b/variants/nibble_screen_connect/target.h @@ -23,8 +23,5 @@ extern SensorManager sensors; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); -mesh::LocalIdentity radio_new_identity(); +mesh::LocalIdentity radio_new_identity(); diff --git a/variants/promicro/target.cpp b/variants/promicro/target.cpp index ddcc2a53..b5a74c90 100644 --- a/variants/promicro/target.cpp +++ b/variants/promicro/target.cpp @@ -29,22 +29,6 @@ bool radio_init() { return radio.std_init(&SPI); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/promicro/target.h b/variants/promicro/target.h index 4b3de981..e577ab4e 100644 --- a/variants/promicro/target.h +++ b/variants/promicro/target.h @@ -24,8 +24,5 @@ extern EnvironmentSensorManager sensors; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/rak11310/target.cpp b/variants/rak11310/target.cpp index c66a2e44..1edd315e 100644 --- a/variants/rak11310/target.cpp +++ b/variants/rak11310/target.cpp @@ -12,24 +12,6 @@ VolatileRTCClock fallback_clock; AutoDiscoverRTCClock rtc_clock(fallback_clock); SensorManager sensors; -bool radio_init() { - rtc_clock.begin(Wire); - - return radio.std_init(&SPI1); -} - -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - void radio_set_tx_power(int8_t dbm) { radio.setOutputPower(dbm); } diff --git a/variants/rak11310/target.h b/variants/rak11310/target.h index c21274b9..fd38e7ca 100644 --- a/variants/rak11310/target.h +++ b/variants/rak11310/target.h @@ -14,8 +14,5 @@ extern AutoDiscoverRTCClock rtc_clock; extern SensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/rak3112/target.cpp b/variants/rak3112/target.cpp index 23be3ef8..9df1bf8f 100644 --- a/variants/rak3112/target.cpp +++ b/variants/rak3112/target.cpp @@ -39,22 +39,6 @@ bool radio_init() { #endif } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/rak3112/target.h b/variants/rak3112/target.h index 72f13f32..f93cd539 100644 --- a/variants/rak3112/target.h +++ b/variants/rak3112/target.h @@ -24,8 +24,5 @@ extern EnvironmentSensorManager sensors; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/rak3401/target.cpp b/variants/rak3401/target.cpp index b9cb1ecc..5309e6b2 100644 --- a/variants/rak3401/target.cpp +++ b/variants/rak3401/target.cpp @@ -37,22 +37,6 @@ bool radio_init() { return radio.std_init(&SPI); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/rak3401/target.h b/variants/rak3401/target.h index 215be38c..00653e90 100644 --- a/variants/rak3401/target.h +++ b/variants/rak3401/target.h @@ -24,8 +24,5 @@ extern AutoDiscoverRTCClock rtc_clock; extern EnvironmentSensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/rak3x72/target.cpp b/variants/rak3x72/target.cpp index 161c0145..e55543a3 100644 --- a/variants/rak3x72/target.cpp +++ b/variants/rak3x72/target.cpp @@ -55,22 +55,6 @@ bool radio_init() { return true; // success } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/rak3x72/target.h b/variants/rak3x72/target.h index 3ba1cf42..566f4fa0 100644 --- a/variants/rak3x72/target.h +++ b/variants/rak3x72/target.h @@ -50,7 +50,4 @@ extern VolatileRTCClock rtc_clock; extern SensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/rak4631/target.cpp b/variants/rak4631/target.cpp index d2377c12..a41ba720 100644 --- a/variants/rak4631/target.cpp +++ b/variants/rak4631/target.cpp @@ -37,24 +37,7 @@ bool radio_init() { return radio.std_init(&SPI); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity } - diff --git a/variants/rak4631/target.h b/variants/rak4631/target.h index 51337c53..1529f904 100644 --- a/variants/rak4631/target.h +++ b/variants/rak4631/target.h @@ -24,8 +24,5 @@ extern AutoDiscoverRTCClock rtc_clock; extern EnvironmentSensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/rak_wismesh_tag/target.cpp b/variants/rak_wismesh_tag/target.cpp index e52a12b2..cdf81f4f 100644 --- a/variants/rak_wismesh_tag/target.cpp +++ b/variants/rak_wismesh_tag/target.cpp @@ -33,22 +33,6 @@ bool radio_init() { return radio.std_init(&SPI); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/rak_wismesh_tag/target.h b/variants/rak_wismesh_tag/target.h index bc5a4921..fbe18d2d 100644 --- a/variants/rak_wismesh_tag/target.h +++ b/variants/rak_wismesh_tag/target.h @@ -21,8 +21,5 @@ extern AutoDiscoverRTCClock rtc_clock; extern EnvironmentSensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/rpi_picow/target.cpp b/variants/rpi_picow/target.cpp index 568987ba..9318b7f0 100644 --- a/variants/rpi_picow/target.cpp +++ b/variants/rpi_picow/target.cpp @@ -18,22 +18,6 @@ bool radio_init() { return radio.std_init(&SPI1); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/rpi_picow/target.h b/variants/rpi_picow/target.h index 255d3067..eb918441 100644 --- a/variants/rpi_picow/target.h +++ b/variants/rpi_picow/target.h @@ -14,8 +14,5 @@ extern AutoDiscoverRTCClock rtc_clock; extern SensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/sensecap_indicator-espnow/target.cpp b/variants/sensecap_indicator-espnow/target.cpp index 6674c180..c84d1883 100644 --- a/variants/sensecap_indicator-espnow/target.cpp +++ b/variants/sensecap_indicator-espnow/target.cpp @@ -29,18 +29,6 @@ bool radio_init() { return true; // success } -uint32_t radio_get_rng_seed() { - return millis() + radio_driver.intID(); // TODO: where to get some entropy? -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - // no-op -} - -void radio_set_tx_power(int8_t dbm) { - radio_driver.setTxPower(dbm); -} - // NOTE: as we are using the WiFi radio, the ESP_IDF will have enabled hardware RNG: // https://docs.espressif.com/projects/esp-idf/en/stable/esp32/api-reference/system/random.html class ESP_RNG : public mesh::RNG { diff --git a/variants/sensecap_indicator-espnow/target.h b/variants/sensecap_indicator-espnow/target.h index a56dec7b..dab4575e 100644 --- a/variants/sensecap_indicator-espnow/target.h +++ b/variants/sensecap_indicator-espnow/target.h @@ -23,7 +23,4 @@ extern EnvironmentSensorManager sensors; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/sensecap_solar/target.cpp b/variants/sensecap_solar/target.cpp index 8b506cc6..46641517 100644 --- a/variants/sensecap_solar/target.cpp +++ b/variants/sensecap_solar/target.cpp @@ -25,22 +25,6 @@ bool radio_init() { return radio.std_init(&SPI); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/sensecap_solar/target.h b/variants/sensecap_solar/target.h index 243c4440..a1c01f13 100644 --- a/variants/sensecap_solar/target.h +++ b/variants/sensecap_solar/target.h @@ -15,8 +15,5 @@ extern AutoDiscoverRTCClock rtc_clock; extern EnvironmentSensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/station_g2/target.cpp b/variants/station_g2/target.cpp index 65cc388d..8018c20e 100644 --- a/variants/station_g2/target.cpp +++ b/variants/station_g2/target.cpp @@ -40,22 +40,6 @@ bool radio_init() { #endif } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/station_g2/target.h b/variants/station_g2/target.h index 9a361025..b4eadbba 100644 --- a/variants/station_g2/target.h +++ b/variants/station_g2/target.h @@ -24,8 +24,5 @@ extern EnvironmentSensorManager sensors; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/t1000-e/target.cpp b/variants/t1000-e/target.cpp index bbf453ca..42532827 100644 --- a/variants/t1000-e/target.cpp +++ b/variants/t1000-e/target.cpp @@ -74,22 +74,6 @@ bool radio_init() { return true; // success } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/t1000-e/target.h b/variants/t1000-e/target.h index d4e3c02c..db003cc5 100644 --- a/variants/t1000-e/target.h +++ b/variants/t1000-e/target.h @@ -41,7 +41,4 @@ extern VolatileRTCClock rtc_clock; extern T1000SensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/tenstar_c3/target.cpp b/variants/tenstar_c3/target.cpp index 7a1794e6..909625ed 100644 --- a/variants/tenstar_c3/target.cpp +++ b/variants/tenstar_c3/target.cpp @@ -27,22 +27,6 @@ bool radio_init() { #endif } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/tenstar_c3/target.h b/variants/tenstar_c3/target.h index b228b04e..b3ee6d17 100644 --- a/variants/tenstar_c3/target.h +++ b/variants/tenstar_c3/target.h @@ -15,8 +15,5 @@ extern AutoDiscoverRTCClock rtc_clock; extern SensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/thinknode_m1/target.cpp b/variants/thinknode_m1/target.cpp index 934040e1..69306fc0 100644 --- a/variants/thinknode_m1/target.cpp +++ b/variants/thinknode_m1/target.cpp @@ -24,22 +24,6 @@ bool radio_init() { return radio.std_init(&SPI); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/thinknode_m1/target.h b/variants/thinknode_m1/target.h index 3882202b..ec1297be 100644 --- a/variants/thinknode_m1/target.h +++ b/variants/thinknode_m1/target.h @@ -43,8 +43,5 @@ extern ThinkNodeM1SensorManager sensors; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/thinknode_m2/target.cpp b/variants/thinknode_m2/target.cpp index a8919034..ff0dd6cf 100644 --- a/variants/thinknode_m2/target.cpp +++ b/variants/thinknode_m2/target.cpp @@ -34,23 +34,6 @@ bool radio_init() { #endif } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/thinknode_m2/target.h b/variants/thinknode_m2/target.h index ddaaeff7..37ede89e 100644 --- a/variants/thinknode_m2/target.h +++ b/variants/thinknode_m2/target.h @@ -24,9 +24,6 @@ extern SensorManager sensors; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/thinknode_m3/target.cpp b/variants/thinknode_m3/target.cpp index 63ecdf76..1e6c2ad1 100644 --- a/variants/thinknode_m3/target.cpp +++ b/variants/thinknode_m3/target.cpp @@ -78,22 +78,6 @@ bool radio_init() { return true; // success } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/thinknode_m3/target.h b/variants/thinknode_m3/target.h index 4124761c..f2d34328 100644 --- a/variants/thinknode_m3/target.h +++ b/variants/thinknode_m3/target.h @@ -23,7 +23,4 @@ extern AutoDiscoverRTCClock rtc_clock; extern EnvironmentSensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/thinknode_m5/target.cpp b/variants/thinknode_m5/target.cpp index e5908fdf..be534f67 100644 --- a/variants/thinknode_m5/target.cpp +++ b/variants/thinknode_m5/target.cpp @@ -41,23 +41,6 @@ bool radio_init() { #endif } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/thinknode_m5/target.h b/variants/thinknode_m5/target.h index d10760e2..a613e390 100644 --- a/variants/thinknode_m5/target.h +++ b/variants/thinknode_m5/target.h @@ -27,9 +27,6 @@ extern PCA9557 expander; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/thinknode_m6/target.cpp b/variants/thinknode_m6/target.cpp index 01957362..de167194 100644 --- a/variants/thinknode_m6/target.cpp +++ b/variants/thinknode_m6/target.cpp @@ -28,22 +28,6 @@ bool radio_init() { return radio.std_init(&SPI); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/thinknode_m6/target.h b/variants/thinknode_m6/target.h index 221e0a7c..76188e58 100644 --- a/variants/thinknode_m6/target.h +++ b/variants/thinknode_m6/target.h @@ -25,8 +25,5 @@ extern EnvironmentSensorManager sensors; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/tiny_relay/target.cpp b/variants/tiny_relay/target.cpp index c05f552e..aed8a67c 100644 --- a/variants/tiny_relay/target.cpp +++ b/variants/tiny_relay/target.cpp @@ -57,25 +57,6 @@ bool radio_init() return true; // success } -uint32_t radio_get_rng_seed() -{ - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) -{ - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) -{ - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); diff --git a/variants/tiny_relay/target.h b/variants/tiny_relay/target.h index d1583712..4e2e4afa 100644 --- a/variants/tiny_relay/target.h +++ b/variants/tiny_relay/target.h @@ -53,7 +53,4 @@ extern VolatileRTCClock rtc_clock; extern SensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/waveshare_rp2040_lora/target.cpp b/variants/waveshare_rp2040_lora/target.cpp index 907a37f5..ef47708f 100644 --- a/variants/waveshare_rp2040_lora/target.cpp +++ b/variants/waveshare_rp2040_lora/target.cpp @@ -28,22 +28,6 @@ bool radio_init() { return radio.std_init(NULL); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/waveshare_rp2040_lora/target.h b/variants/waveshare_rp2040_lora/target.h index 4590f0d1..a090931c 100644 --- a/variants/waveshare_rp2040_lora/target.h +++ b/variants/waveshare_rp2040_lora/target.h @@ -15,8 +15,5 @@ extern AutoDiscoverRTCClock rtc_clock; extern SensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/wio-e5-dev/target.cpp b/variants/wio-e5-dev/target.cpp index 8d8069eb..680da631 100644 --- a/variants/wio-e5-dev/target.cpp +++ b/variants/wio-e5-dev/target.cpp @@ -52,22 +52,6 @@ bool radio_init() { return true; // success } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/wio-e5-dev/target.h b/variants/wio-e5-dev/target.h index 1d1fc5cb..5cb2a840 100644 --- a/variants/wio-e5-dev/target.h +++ b/variants/wio-e5-dev/target.h @@ -27,7 +27,4 @@ extern VolatileRTCClock rtc_clock; extern SensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/wio-e5-mini/target.cpp b/variants/wio-e5-mini/target.cpp index 338f398d..92775d55 100644 --- a/variants/wio-e5-mini/target.cpp +++ b/variants/wio-e5-mini/target.cpp @@ -50,22 +50,6 @@ bool radio_init() { return true; // success } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/wio-e5-mini/target.h b/variants/wio-e5-mini/target.h index a4e5fb60..4807e0f7 100644 --- a/variants/wio-e5-mini/target.h +++ b/variants/wio-e5-mini/target.h @@ -58,7 +58,4 @@ extern VolatileRTCClock rtc_clock; extern WIOE5SensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/wio-tracker-l1/target.cpp b/variants/wio-tracker-l1/target.cpp index 76626551..7a573258 100644 --- a/variants/wio-tracker-l1/target.cpp +++ b/variants/wio-tracker-l1/target.cpp @@ -33,22 +33,6 @@ bool radio_init() { return radio.std_init(&SPI); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/wio-tracker-l1/target.h b/variants/wio-tracker-l1/target.h index 72766e77..05bc7ff1 100644 --- a/variants/wio-tracker-l1/target.h +++ b/variants/wio-tracker-l1/target.h @@ -31,8 +31,5 @@ extern EnvironmentSensorManager sensors; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/wio_wm1110/target.cpp b/variants/wio_wm1110/target.cpp index 9be3061c..1bb7cec8 100644 --- a/variants/wio_wm1110/target.cpp +++ b/variants/wio_wm1110/target.cpp @@ -70,22 +70,6 @@ bool radio_init() { return true; // success } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/wio_wm1110/target.h b/variants/wio_wm1110/target.h index 8712a0ef..79504ab8 100644 --- a/variants/wio_wm1110/target.h +++ b/variants/wio_wm1110/target.h @@ -14,8 +14,5 @@ extern VolatileRTCClock rtc_clock; extern EnvironmentSensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/xiao_c3/target.cpp b/variants/xiao_c3/target.cpp index 300ff60e..7f30dc8b 100644 --- a/variants/xiao_c3/target.cpp +++ b/variants/xiao_c3/target.cpp @@ -35,22 +35,6 @@ bool radio_init() { #endif } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/xiao_c3/target.h b/variants/xiao_c3/target.h index 54a389f0..32f11862 100644 --- a/variants/xiao_c3/target.h +++ b/variants/xiao_c3/target.h @@ -14,8 +14,5 @@ extern AutoDiscoverRTCClock rtc_clock; extern EnvironmentSensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/xiao_c6/target.h b/variants/xiao_c6/target.h index 4ec06ee1..c4cec063 100644 --- a/variants/xiao_c6/target.h +++ b/variants/xiao_c6/target.h @@ -15,8 +15,5 @@ extern AutoDiscoverRTCClock rtc_clock; extern SensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/xiao_nrf52/target.cpp b/variants/xiao_nrf52/target.cpp index 9efe0015..ab6fe279 100644 --- a/variants/xiao_nrf52/target.cpp +++ b/variants/xiao_nrf52/target.cpp @@ -23,22 +23,6 @@ bool radio_init() { return radio.std_init(&SPI); } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/xiao_nrf52/target.h b/variants/xiao_nrf52/target.h index 956e8362..bb3d2a81 100644 --- a/variants/xiao_nrf52/target.h +++ b/variants/xiao_nrf52/target.h @@ -20,8 +20,5 @@ extern AutoDiscoverRTCClock rtc_clock; extern EnvironmentSensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/xiao_rp2040/target.cpp b/variants/xiao_rp2040/target.cpp index 67a09fcc..fe2c62c3 100644 --- a/variants/xiao_rp2040/target.cpp +++ b/variants/xiao_rp2040/target.cpp @@ -28,22 +28,6 @@ bool radio_init() { #endif } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/xiao_rp2040/target.h b/variants/xiao_rp2040/target.h index 94629b7c..6f035bda 100644 --- a/variants/xiao_rp2040/target.h +++ b/variants/xiao_rp2040/target.h @@ -15,8 +15,5 @@ extern AutoDiscoverRTCClock rtc_clock; extern SensorManager sensors; bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/xiao_s3/target.cpp b/variants/xiao_s3/target.cpp index 014b2552..a7ae7dd8 100644 --- a/variants/xiao_s3/target.cpp +++ b/variants/xiao_s3/target.cpp @@ -35,21 +35,6 @@ bool radio_init() { #endif } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/xiao_s3/target.h b/variants/xiao_s3/target.h index 93b27862..27eddd84 100644 --- a/variants/xiao_s3/target.h +++ b/variants/xiao_s3/target.h @@ -24,7 +24,4 @@ extern EnvironmentSensorManager sensors; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); diff --git a/variants/xiao_s3_wio/target.cpp b/variants/xiao_s3_wio/target.cpp index ca824d38..8a975959 100644 --- a/variants/xiao_s3_wio/target.cpp +++ b/variants/xiao_s3_wio/target.cpp @@ -35,22 +35,6 @@ bool radio_init() { #endif } -uint32_t radio_get_rng_seed() { - return radio.random(0x7FFFFFFF); -} - -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { - radio.setFrequency(freq); - radio.setSpreadingFactor(sf); - radio.setBandwidth(bw); - radio.setCodingRate(cr); - radio_driver.updatePreamble(sf); -} - -void radio_set_tx_power(int8_t dbm) { - radio.setOutputPower(dbm); -} - mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity diff --git a/variants/xiao_s3_wio/target.h b/variants/xiao_s3_wio/target.h index d8502863..29c5f281 100644 --- a/variants/xiao_s3_wio/target.h +++ b/variants/xiao_s3_wio/target.h @@ -24,8 +24,5 @@ extern EnvironmentSensorManager sensors; #endif bool radio_init(); -uint32_t radio_get_rng_seed(); -void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); -void radio_set_tx_power(int8_t dbm); mesh::LocalIdentity radio_new_identity(); From 5a509752a7b60d1c792fca61e10ebbf49fb1272e Mon Sep 17 00:00:00 2001 From: liamcottle Date: Sat, 2 May 2026 01:47:35 +1200 Subject: [PATCH 54/54] don't play startup tune if buzzer pref disabled --- examples/companion_radio/ui-new/UITask.cpp | 1 + examples/companion_radio/ui-orig/UITask.cpp | 1 + src/helpers/ui/buzzer.cpp | 1 - 3 files changed, 2 insertions(+), 1 deletion(-) diff --git a/examples/companion_radio/ui-new/UITask.cpp b/examples/companion_radio/ui-new/UITask.cpp index 49c75a5b..6f363d7f 100644 --- a/examples/companion_radio/ui-new/UITask.cpp +++ b/examples/companion_radio/ui-new/UITask.cpp @@ -575,6 +575,7 @@ void UITask::begin(DisplayDriver* display, SensorManager* sensors, NodePrefs* no #ifdef PIN_BUZZER buzzer.begin(); buzzer.quiet(_node_prefs->buzzer_quiet); + buzzer.startup(); #endif #ifdef PIN_VIBRATION diff --git a/examples/companion_radio/ui-orig/UITask.cpp b/examples/companion_radio/ui-orig/UITask.cpp index 3ad36fb0..12a374d9 100644 --- a/examples/companion_radio/ui-orig/UITask.cpp +++ b/examples/companion_radio/ui-orig/UITask.cpp @@ -57,6 +57,7 @@ void UITask::begin(DisplayDriver* display, SensorManager* sensors, NodePrefs* no #ifdef PIN_BUZZER buzzer.begin(); buzzer.quiet(_node_prefs->buzzer_quiet); + buzzer.startup(); #endif // Initialize digital button if available diff --git a/src/helpers/ui/buzzer.cpp b/src/helpers/ui/buzzer.cpp index ca469d17..eb9b695b 100644 --- a/src/helpers/ui/buzzer.cpp +++ b/src/helpers/ui/buzzer.cpp @@ -12,7 +12,6 @@ void genericBuzzer::begin() { quiet(false); pinMode(PIN_BUZZER, OUTPUT); digitalWrite(PIN_BUZZER, LOW); // need to pull low by default to avoid extreme power draw - startup(); } void genericBuzzer::play(const char *melody) {